summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-02-18mt76: usb: use a linear buffer for tx/rx datapath if sg is not supportedLorenzo Bianconi
Use linear fragment and not a single usb scatter-gather buffer in mt76u {tx,rx} datapath if the usb controller has sg data length constraints Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: do not use sg buffers for mcu messagesLorenzo Bianconi
Do not use scatter-gather buffers for mcu commands. Introduce mt76u_buf_alloc and mt76u_buf_alloc_sg routines. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: move mt76u_check_sg in usb.cLorenzo Bianconi
Move mt76u_check_sg routine in usb.c and introduce sg_en variable in mt76_usb in order to check if scatter-gather is supported by mt76u layer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: do not run mt76u_queues_deinit twiceLorenzo Bianconi
Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path since it will be run in mt76x0u_register_device or mt76x2u_register_device error path. Current implementation triggers the following kernel warning: [ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8 [ 67.019513] refcount_t: underflow; use-after-free. [ 67.099872] Hardware name: BCM2835 [ 67.106268] Backtrace: [ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24) [ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6 [ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114) [ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120) [ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58 [ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50) [ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000 [ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8) [ 67.195221] r3:80c91c25 r2:8099dc94 [ 67.200370] r4:00000000 [ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c) [ 67.218046] r4:b7368e00 r3:00000001 [ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c) [ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb]) [ 67.247302] r4:00000001 r3:00000001 [ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb]) [ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080 [ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u]) [ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20 [ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u]) [ 67.311174] r4:b5dace20 r3:00000000 [ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240) [ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620 [ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8) [ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120 [ 67.359175] r4:b8fe8620 r3:805e0a68 [ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180) [ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034 [ 67.387170] r4:b8fe8620 r3:00000000 [ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4) [ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620 [ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0) [ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027 [ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30) [ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034 [ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c) [ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124) [ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034 [ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140) [ 67.493901] r5:00000000 r4:7f65e000 [ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u]) [ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0 [ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210) [ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c) [ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0 [ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304) Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: fix possible memory leak in mt76u_buf_freeLorenzo Bianconi
Move q->ndesc initialization before the for loop in mt76u_alloc_rx since otherwise allocated urbs will not be freed in mt76u_buf_free Double-check scatterlist pointer in mt76u_buf_free Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: usb: fix possible NULL pointer dereference in mt76u_mcu_deinitLorenzo Bianconi
Fix possible NULL pointer dereference in mt76u_mcu_deinit routine that can occur if initialization path fails before calling mt76u_mcu_init_rx Fixes: ee676cd5017c ("mt76: add driver code for MT76x2u based devices") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02u: use usb_bulk_msg to upload firmwareStanislaw Gruszka
We don't need to send firmware data asynchronously, much simpler is just use synchronous usb_bulk_msg(). Tested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: init: introduce mt76x0_init_txpower routineLorenzo Bianconi
Add mt76x0_init_txpower in order to initialize max_power per channel at device bootstrap. Modify mt76x0_get_tx_power_per_rate and mt76x0_get_power_info signature in order to compute tx power for non-operating channels Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: phy: report target_power in debugfsLorenzo Bianconi
Initialize target_power variable in mt76x0_phy_set_txpower in order to report target_power in debugfs Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: change the return type of mt76_dma_attach()Ryder Lee
There is no need to retun 0 in mt76_dma_attach(), so switch it to void. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x2: remove mt76x2_alloc_device routineLorenzo Bianconi
Remove mt76x2_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x2_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: remove mt76x0u_alloc_device routineLorenzo Bianconi
Remove mt76x0u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x0u_probe and in mt76x0e_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x2u: remove mt76x2u_alloc_device routineLorenzo Bianconi
Remove mt76x2u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x2u_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move alloc_device common code in mt76_alloc_deviceLorenzo Bianconi
Move mt76x{0,2} alloc_device common code in mt76_alloc_device and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: increase ED/CCA tx block thresholdFelix Fietkau
Block only when the busy time reaches 92%, as lower values can be reached with heavy 802.11 traffic as well. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: measure the time between mt76x02_edcca_check runsFelix Fietkau
Based on system load and time needed by other calibration runs, the time between dev->mac_work runs can vary quite a bit. Calculate busy time based on the actual time difference in order to avoid potentially over-estimating busy time, which could lead to unnecessary tx blocking. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: clear CCA timer stats in mt76x02_edcca_initFelix Fietkau
Avoid triggering too early Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: run MAC work every 100msFelix Fietkau
ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: explicitly disable energy detect cca during scanFelix Fietkau
Avoid reusing the previous channel's tx blocking state Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: mt76x2: avoid running DPD calibration if tx is blockedFelix Fietkau
Doing so could lead to hangs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: fix software encryption issuesFelix Fietkau
Software encrypted packets can be passed not just through the drv_tx callback, but also through the intermediate tx queue. In order to deal with that, move the override to mt76x02_mac_write_txwi and also take care of filling in the per-packet rate information Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: remove add_buf pointer in mt76_queue_opsLorenzo Bianconi
Remove add_buf function pointer in mt76_queue_ops data structure since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_dma_tx_queue_skb_raw in mt76-core moduleLorenzo Bianconi
Move mt76_dma_tx_queue_skb_raw routine in dma.c and add the corresponding entry in mt76_queue_ops data structure. mt76_dma_tx_queue_skb_raw will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: mcu: remove useless commented configurationLorenzo Bianconi
Remove useless commented out configuration in mt76x0u_load_firmware routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_rx_event in mt76-coreLorenzo Bianconi
Move mt76_mcu_rx_event i mt76-core module and remove duplicated code. mt76_mcu_rx_event will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_get_response in mt76-coreLorenzo Bianconi
Move mt76_mcu_get_response in mt76-core module and remove duplicated code. mt76_mcu_get_response will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: move mt76_mcu_msg_alloc in mt76-coreLorenzo Bianconi
Move mt76_mcu_msg_alloc in mt76-core module and remove duplicated code. mt76_mcu_msg_alloc will be reused adding support for mt7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: eeprom: fix VHT mcs{8,9} rate power offsetLorenzo Bianconi
Fix rate power configuration for VHT mcs 8 and 9 in mt76x0_get_tx_power_per_rate. Moreover use the rate power offset used for HT/VHT mcs 6 even for HT/VHT mcs 7 Fixes: b37bbc8c8251 ("mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: enable support for IBSS and MESHStanislaw Gruszka
Since we implement beconing on USB now, similar interfaces should be supported for USB as are for MMIO. Tested only on IBSS mode and AP mode (not enabled due to lack of PS buffering). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: beaconing fixes for USBStanislaw Gruszka
Configure beaconing on USB devices without PS buffering support. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: init beacon config for mt76x2uStanislaw Gruszka
Initialize beaconing also on mt76x2u. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: minor beaconing init changesStanislaw Gruszka
Disable BEACON timer during init and configure interrupt registers only for mmio devices. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: initialize mutli bss mode when set up addressStanislaw Gruszka
BSSID is not strtirct related with beaconing (for example we can have 2 STA vifs) and more related with MAC address, so initaize BSSID when setting MAC address. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: use commmon add interface for mt76x2uStanislaw Gruszka
Since we now support mt76x2u feature to allow set mac address when creating interface in common code we can use it for mt76x2u. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02: use mask for vifsStanislaw Gruszka
Use vif_mask to count interfaces to allow to set mac address in HW if there is only one interface and report error if we create interface with wrong BSSID resulting in already used index. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18regulator: stpmic1: Remove regul_id and *regmap from struct stpmic1_regulatorAxel Lin
At the context with *rdev available, regulator core provides rdev_get_id()/rdev_get_regmap() APIs to get regulator id and *regmap. So no need to store them in struct stpmic1_regulator. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18regulator: pv88060: Fix .ops for PV88060_SWAxel Lin
There is no vsel_reg/vsel_mask settings for PV88060_ID_SWx, so don't use pv88060_ldo_ops for PV88060_SW. The PV88060_ID_SWx is fixed voltage, set .fixed_uV instead of .min_uV then regulator core will automatically support get_voltage and list_voltage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18regulator: core: remove unused rdev_get_supply()Masahiro Yamada
This is a remnant of commit 70a7fb80e85a ("regulator: core: Fix nested locking of supplies"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18regulator: axp20x: fix DCDCB and BLDO2 definitions for AXP806Ondrej Jirman
This fixes another set of errors from the refactoring of literals to mask preproccesor definitions. Found by debugging a broken voltage setup on Orange Pi One Plus. Fixes: db4a555f7c4cf ("regulator: axp20x: use defines for masks") Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-18mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issueRayagonda Kokatanur
RING_CONTROL reg was not written due to wrong address, hence all the subsequent ring flush was timing out. Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18mailbox: Export mbox_flush()Thierry Reding
The mbox_flush() function can be used by drivers that are built as modules, so the function needs to be exported. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18Bluetooth: mediatek: update the common setup between MT7622 and other devicesSean Wang
Update the setup sequence on MT7622 to apply the same flow with MT7663U and MT7668U USB [1] as much as possible. These additional commands are required to parse the corresponding event to determine what current state the Bluetooth device is on and thus it's necessary to extend mtk_hci_wmt_sync to support the reading status in the same patch. [1] http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017074.html Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: pass a pointer to mtk_hci_wmt_syncSean Wang
Pass a structure pointer to mtk_hci_wmt_sync rather than several arguments to avoid take up additional stack area and be better to read the code. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: fix up an error path to restore bdev->tx_stateSean Wang
Restore bdev->tx_state with clearing bit BTMTKUART_TX_WAIT_VND_EVT when there is an error on waiting for the corresponding event. Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: trivial typo fixSean Wang
add a trivial typo fix from speicfic to specific Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_ldisc: Initialize hci_dev before open()Jeremy Cline
The hci_dev struct hdev is referenced in work queues and timers started by open() in some protocols. This creates a race between the initialization function and the work or timer which can result hdev being dereferenced while it is still null. The syzbot report contains a reliable reproducer which causes a null pointer dereference of hdev in hci_uart_write_work() by making the memory allocation for hdev fail. To fix this, ensure hdev is valid from before calling a protocol's open() until after calling a protocol's close(). Reported-by: syzbot+257790c15bcdef6fe00c@syzkaller.appspotmail.com Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: Disable IBS state machine and flush Tx bufferBalakrishna Godavarthi
During hci down we observed IBS sleep commands are queued in the Tx buffer and hci_uart_write_work is sending data to the chip which is not required as the chip is powered off. This patch will disable IBS and flush the Tx buffer before we turn off the chip. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: Deassert RTS while baudrate change commandBalakrishna Godavarthi
This patch will help to stop frame reassembly errors while changing the baudrate. This is because host send a change baudrate request command to the chip with 115200 bps, Whereas chip will change their UART clocks to the enable for new baudrate and sends the response for the change request command with newer baudrate, On host side we are still operating in 115200 bps which results of reading garbage data. Here we are pulling RTS line, so that chip we will wait to send data to host until host change its baudrate. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: hci_qca: use wait_until_sent() for power pulsesBalakrishna Godavarthi
wcn3990 requires a power pulse to turn ON/OFF along with regulators. Sometimes we are observing the power pulses are sent out with some time delay, due to queuing these commands. This is causing synchronization issues with chip, which intern delay the chip setup or may end up with communication issues. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: remove redundant zero check on countColin Ian King
Variable count is never zero inside the loop so the check if count is zero is redundant and can be removed. Fix this. Detected by CoverityScan, CID#1466880 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-18 14:36:52 +0000