| Age | Commit message (Collapse) | Author |
|---|
|
Whitespace cleanup.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].
However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.
The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE
This change avoids a yet-unresolved crash reported in [2].
A note on dealing with symmetrical distances between nodes:
Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.
In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.
As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).
Some final notes on semantics:
- It is implied that it is the responsibility of the arch NUMA code to
reset the NUMA distance map for an error in distance map parsing.
- It is the responsibility of the FW NUMA topology parsing (whether OF or
ACPI) to enforce NUMA distance rules, and not arch NUMA code.
[1] Documents/devicetree/bindings/numa.txt
[2] https://www.spinics.net/lists/arm-kernel/msg683304.html
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_dma_configure() was *supposed* to be following the same logic as
acpi_dma_configure() and only setting bus_dma_mask if some range was
specified by the firmware. However, it seems that subtlety got lost in
the process of fitting it into the differently-shaped control flow, and
as a result the force_dma==true case ends up always setting the bus mask
to the 32-bit default, which is not what anyone wants.
Make sure we only touch it if the DT actually said so.
Fixes: 6c2fb2ea7636 ("of/device: Set bus DMA mask as appropriate")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Robert Richter <robert.richter@cavium.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.
Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
with reboot; e.g. a ~60 second delay between issuing reboot and the
board power cycling (and in some OS configurations reboot will fail
and require manual power cycling).
Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk:
meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4
Co-Processor seems to depend on FCLK_DIV3 being operational.
Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk:
meson: add fdiv clock gates"), this clock was modeled and left on by
the bootloader.
We don't have precise documentation about the SCPI Co-Processor and
its clock requirement so we are learning things the hard way.
Marking this clock as critical solves the problem but it should not
be viewed as final solution. Ideally, the SCPI driver should claim
these clocks. We also depends on some clock hand-off mechanism
making its way to CCF, to make sure the clock stays on between its
registration and the SCPI driver probe.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The only reason that remains, to why the ARM cpuidle driver calls
cpuidle_register_driver(), is to avoid printing an error message in case
another driver already have been registered for the CPU. This seems a bit
silly, but more importantly, if that is a common scenario, perhaps we
should change cpuidle_register() accordingly instead.
In either case, let's consolidate the code, by converting to use
cpuidle_register|unregister(), which also avoids the unnecessary allocation
of the struct cpuidle_device.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There's no point to register the cpuidle driver for the current CPU, when
the initialization of the arch specific back-end data fails by returning
-ENXIO.
Instead, let's re-order the sequence to its original flow, by first trying
to initialize the back-end part and then act accordingly on the returned
error code. Additionally, let's print the error message, no matter of what
error code that was returned.
Fixes: a0d46a3dfdc3 (ARM: cpuidle: Register per cpuidle device)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We still get a link failure with IOSF_MBI=m when the xpower driver
is built-in:
drivers/acpi/pmic/intel_pmic_xpower.o: In function `intel_xpower_pmic_update_power':
intel_pmic_xpower.c:(.text+0x4f2): undefined reference to `iosf_mbi_block_punit_i2c_access'
intel_pmic_xpower.c:(.text+0x5e2): undefined reference to `iosf_mbi_unblock_punit_i2c_access'
This makes the dependency stronger, so we can only build when IOSF_MBI
is built-in.
Fixes: 6a9b593d4b6f (ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On ICL DMC/PCODE retains the HW context only for port A across DC
transitions, for the other port B combo PHY, it doesn't. So we need to
do this manually after exiting from DC6. Do the reinit even after
exiting from DC5, it won't hurt since we only reinit the PHY in case
it's needed (in case it was disabled to begin with).
As can be guessed from the bugzilla report leaving the PHY uninited will
lead to a later timeout during the port B specific AUX and DDI_IO power
well enabling.
v2:
- Apply the fix on all GEN>=11 platforms. (Rodrigo)
Bspec: 21257
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108070
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-6-imre.deak@intel.com
|
|
Bspec says we should skip the initialization of combo PHYs that are
already initialized. We'll need to reinit the PHYs more frequently
when exiting from DC6 (after the next patch), so let's make sure the
uninit sequence complies with the spec. For safety skip the init only if
all the PHY register fields have their expected values.
v2:
- Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose)
Bspec: 21257
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-5-imre.deak@intel.com
|
|
Verify on CNL, ICL that the combo PHY HW state stayed intact after PHY
initialization.
v2:
- Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-4-imre.deak@intel.com
|
|
Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a
separate file.
No functional change.
v2:
- Use SPDX license tag instead of boilerplate. (Rodrigo)
v3:
- Use MIT instead of GPL-2.0 license. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-3-imre.deak@intel.com
|
|
BSpec says to clear the comp init HW flag too during combo PHY uninit,
so do that. The lack of this could badly interact with the PHY reinit
after a DC6/9 transition at least, where (after a follow-up patch fixing
the init code) we'd skip the initialization incorrectly due to this flag
being set.
BSpec: 21257
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-2-imre.deak@intel.com
|
|
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that the writes into the context image are completed prior to the
register mmio to trigger execution. Although previously we were assured
by the SDM that all writes are flushed before an uncached memory
transaction (our mmio write to submit the context to HW for execution),
we have empirical evidence to believe that this is not actually the
case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108315
References: https://bugs.freedesktop.org/show_bug.cgi?id=106887
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
|
|
Pull MTD fixes from Boris Brezillon:
"MTD changes:
- Kill a VLA in sa1100
SPI NOR changes:
- Make sure ->addr_width is restored when SFDP parsing fails
- Propate errors happening in cqspi_direct_read_execute()
NAND changes:
- Fix kernel-doc mismatch
- Fix nanddev_neraseblocks() to return the correct value
- Avoid selection of BCH_CONST_PARAMS when some users require dynamic
BCH settings"
* tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd:
mtd: nand: Fix nanddev_pos_next_page() kernel-doc header
mtd: sa1100: avoid VLA in sa1100_setup_mtd
mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed
mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
mtd: nand: Fix nanddev_neraseblocks()
mtd: nand: drop kernel-doc notation for a deleted function parameter
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
|
|
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.
This will be followed by a much bigger cleanup/simplification patch.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Requested-by: Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If you run aptitude on framebuffer console, the display is corrupted. The
corruption is caused by the commit d8ae7242. The patch adds "offset" to
"start" when calling scr_memsetw, but it forgets to do the same addition
on a subsequent call to do_update_region.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d8ae72427187 ("vt: preserve unicode values corresponding to screen characters")
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
References:
https://www.spinics.net/lists/linux-usb/msg88965.html
http://linet.gr.jp/~kojima/PlamoWeb/ML/htdocs/201808/msg00019.html
Signed-off-by: Sebastian Parschauer <sparschauer@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Until we have sorted out all problems.
v2: return -EINVAL during create if flag is set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/260937/
|
|
If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:
ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
sata_rcar ee300000.sata: Unable to initialize IPMMU context
iommu: Failed to add device ee300000.sata to group 0: -22
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
Call trace:
ipmmu_domain_free+0x1c/0xa0
iommu_group_release+0x48/0x68
kobject_put+0x74/0xe8
kobject_del.part.0+0x3c/0x50
kobject_put+0x60/0xe8
iommu_group_get_for_dev+0xa8/0x1f0
ipmmu_add_device+0x1c/0x40
of_iommu_configure+0x118/0x190
Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't request tag insertion when it isn't present in outgoing skb.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver version string is obviously not meant to be changed at run
time, so mark it `const'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the temporary data buffer used when tapping into the SMT Tx queue
from the outer function level into the conditional block it's actually
used in and its containing skb is also declared, making the structure of
code better.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix:
drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment]
by adding a missing comment closing.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SPDX annotation for this driver does not match the license text,
which specifies GNU GPL 2 or later. Make the two match by correcting
the SPDX tag.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:
[ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 160.697234] PGD 0 P4D 0
[ 160.697814] Oops: 0010 [#1] SMP PTI
[ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2
[ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[ 160.700322] RIP: 0010: (null)
[ 160.700920] Code: Bad RIP value.
[ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.708372] Call Trace:
[ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[ 160.710284] ? wake_up_q+0x54/0x70
[ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[ 160.714013] ? process_one_work+0x1a1/0x3a0
[ 160.714667] ? worker_thread+0x30/0x380
[ 160.715326] ? wq_update_unbound_numa+0x10/0x10
[ 160.715939] ? kthread+0x112/0x130
[ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70
[ 160.717262] ? ret_from_fork+0x35/0x40
[ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[ 160.720141] CR2: 0000000000000000
Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.
[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.
[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
It is not correct to touch aconnector within atomic_check.
[How]
It was added as workaround before, and no longer needed.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With UCLK DPM enabled, slow switching is not supported any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise big gap between these two clocks may causes
some hangs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Causes a black screen on a Stoney laptop.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the dc_config properly when the option is enabled.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add FBC to the list of features that can be enabled from the DM.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Similar to ppfeaturemask. Allows you to selectively enable/disable
DC features.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The value is dependent on whether fbc is available.
v2: only check if num_pipes is valid
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, SDMA page queue is not used under SR-IOV VF, and this queue will
cause ring test failure in amdgpu module reload case. So just disable it.
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For Vega20, LBPW feature is disabled at default.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With UCLK DPM enabled, slow switching is not supported any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise big gap between these two clocks may causes
some hangs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ttm_bo_glob and ttm_mem_glob are defined as structure instance, while
not allocated by kzalloc, so kfree should not be invoked to release
them anymore. Otherwise, it will cause the following kernel BUG when
unloading amdgpu module
[ 48.419294] kernel BUG at /build/linux-5s7Xkn/linux-4.15.0/mm/slub.c:3894!
[ 48.419352] invalid opcode: 0000 [#1] SMP PTI
[ 48.419387] Modules linked in: amdgpu(OE-) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer aesni_intel snd soundcore joydev aes_x86_64 crypto_simd glue_helper cryptd input_leds mac_hid serio_raw binfmt_misc nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse i2c_piix4 8139cp mii floppy pata_acpi
[ 48.419782] CPU: 1 PID: 1281 Comm: modprobe Tainted: G OE 4.15.0-20-generic #21-Ubuntu
[ 48.419838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 48.419901] RIP: 0010:kfree+0x137/0x180
[ 48.419934] RSP: 0018:ffffb02101273bf8 EFLAGS: 00010246
[ 48.419974] RAX: ffffeee1418ad7e0 RBX: ffffffffc075f100 RCX: ffff8fed7fca7ed0
[ 48.420025] RDX: 0000000000000000 RSI: 000000000003440e RDI: 0000000022400000
[ 48.420073] RBP: ffffb02101273c10 R08: 0000000000000010 R09: ffff8fed7ffd3680
[ 48.420121] R10: ffffeee1418ad7c0 R11: ffff8fed7ffd3000 R12: ffffffffc075e2c0
[ 48.420169] R13: ffffffffc074ec10 R14: ffff8fed73063900 R15: ffff8fed737428e8
[ 48.420216] FS: 00007fdc912ec540(0000) GS:ffff8fed7fc80000(0000) knlGS:0000000000000000
[ 48.420267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 48.420308] CR2: 000055fa40c30060 CR3: 000000023470a006 CR4: 00000000003606e0
[ 48.420358] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 48.420405] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 48.420452] Call Trace:
[ 48.420485] ttm_bo_global_kobj_release+0x20/0x30 [amdttm]
[ 48.420528] kobject_release+0x6a/0x180
[ 48.420562] kobject_put+0x28/0x50
[ 48.420595] ttm_bo_global_release+0x36/0x50 [amdttm]
[ 48.420636] amdttm_bo_device_release+0x119/0x180 [amdttm]
[ 48.420678] ? amdttm_bo_clean_mm+0xa6/0xf0 [amdttm]
[ 48.420760] amdgpu_ttm_fini+0xc9/0x180 [amdgpu]
[ 48.420821] amdgpu_bo_fini+0x12/0x40 [amdgpu]
[ 48.420889] gmc_v9_0_sw_fini+0x40/0x50 [amdgpu]
[ 48.420947] amdgpu_device_fini+0x36f/0x4c0 [amdgpu]
[ 48.421007] amdgpu_driver_unload_kms+0xb4/0x150 [amdgpu]
[ 48.421058] drm_dev_unregister+0x46/0xf0 [drm]
[ 48.421102] drm_dev_unplug+0x12/0x70 [drm]
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:
[ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 160.697234] PGD 0 P4D 0
[ 160.697814] Oops: 0010 [#1] SMP PTI
[ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2
[ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[ 160.700322] RIP: 0010: (null)
[ 160.700920] Code: Bad RIP value.
[ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.708372] Call Trace:
[ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[ 160.710284] ? wake_up_q+0x54/0x70
[ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[ 160.714013] ? process_one_work+0x1a1/0x3a0
[ 160.714667] ? worker_thread+0x30/0x380
[ 160.715326] ? wq_update_unbound_numa+0x10/0x10
[ 160.715939] ? kthread+0x112/0x130
[ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70
[ 160.717262] ? ret_from_fork+0x35/0x40
[ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[ 160.720141] CR2: 0000000000000000
Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.
[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.
[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
It is not correct to touch aconnector within atomic_check.
[How]
It was added as workaround before, and no longer needed.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of stack-allocated psp_xgmi_topology_info in function
amdgpu_xgmi_add_device, dynamically allocated this structure to
avoid the frame size of this function excceed 1024 bytes
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a description for dev and remove the excess one for native. Fixes
the following warnings:
../drivers/gpu/drm/drm_fourcc.c:112: warning: Function parameter or member 'dev' not described in 'drm_driver_legacy_fb_format'
../drivers/gpu/drm/drm_fourcc.c:112: warning: Excess function parameter 'native' description in 'drm_driver_legacy_fb_format'
Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107205546.216088-1-sean@poorly.run
|
|
We will meet below issue due to mutex_lock() is called in interrupt context.
The mutex lock is used to protect the pattern trigger data, but before changing
new pattern trigger data (pattern values or repeat value) by users, we always
cancel the timer firstly to clear previous patterns' performance. That means
there is no race in pattern_trig_timer_function(), so we can drop the mutex
lock in pattern_trig_timer_function() to avoid this issue.
Moreover we can move the timer cancelling into mutex protection, since there
is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function().
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
[<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14)
[<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c)
[<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158)
[<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60)
[<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c)
[<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90)
[<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4)
[<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c)
[<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258)
[<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4)
[<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4)
[<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90)
[<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74)
Exception stack(0xeb483f60 to 0xeb483fa8)
3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408
3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98
3fa0: 60020013 ffffffff
[<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38)
[<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268)
[<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c)
[<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec)
Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger")
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
To enable DC5/6 power well 2 has to be disabled as for previous
platforms, so fix things up.
Bspec: 4234
Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com
|
|
Unfortunately, it seems that the HPD IRQ storm problem from the early
days of Intel GPUs was never entirely solved, only mostly. Within the
last couple of days, I got a bug report from one of our customers who
had been having issues with their machine suddenly booting up very
slowly after having updated. The amount of time it took to boot went
from around 30 seconds, to over 6 minutes consistently.
After some investigation, I discovered that i915 was reporting massive
amounts of short HPD IRQ spam on this system from the DisplayPort port,
despite there not being anything actually connected. The symptoms would
start with one "long" HPD IRQ being detected at boot:
[ 1.891398] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00440000, dig 0x00440000, pins 0x000000a0
[ 1.891436] [drm:intel_hpd_irq_handler [i915]] digital hpd port B - long
[ 1.891472] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 0
[ 1.891508] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - long
[ 1.891544] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 7 - cnt: 0
[ 1.891592] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port B - long
[ 1.891628] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port D - long
…
followed by constant short IRQs afterwards:
[ 1.895091] [drm:intel_encoder_hotplug [i915]] [CONNECTOR:66:DP-1] status updated from unknown to disconnected
[ 1.895129] [drm:i915_hotplug_work_func [i915]] Connector DP-3 (pin 7) received hotplug event.
[ 1.895165] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-3]
[ 1.895275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.895312] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.895762] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.895799] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.896239] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450085
[ 1.896293] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.896330] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.896781] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.896817] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.897275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
The customer's system in question has a GM45 GPU, which is apparently
well known for hotplugging storms.
So, workaround this impressively broken hardware by changing the default
HPD storm threshold from 5 to 50. Then, make long IRQs count for 10, and
short IRQs count for 1. This makes it so that 5 long IRQs will trigger
an HPD storm, and on systems with short HPD storm detection 50 short
IRQs will trigger an HPD storm. 50 short IRQs amounts to 100ms of
constant pulsing, which seems like a good middleground between being too
sensitive and not being sensitive enough (which would cause visible
stutters in userspace every time a storm occurs).
And just to be extra safe: we don't enable this by default on systems
with MST support. There's too high of a chance of MST support triggering
storm detection, and systems that are new enough to support MST are a
lot less likely to have issues with IRQ storms anyway.
As a note: this patch was tested using a ThinkPad T450s and a Chamelium
to simulate the short IRQ storms.
Changes since v1:
- Don't use two separate thresholds, just make long IRQs count for 10
each and short IRQs count for 1. This simplifies the code a bit
- Ville Syrjälä
Changes since v2:
- Document @long_hpd in intel_hpd_irq_storm_detect, no functional
changes
Changes since v4:
- Remove !! in long_hpd assignment - Ville Syrjälä
- queue_hp = true - Ville Syrjälä
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-6-lyude@redhat.com
|
