summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-11-13mmc: bcm2835: Use devm_platform_ioremap_resource wrapperSaiyam Doshi
Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Generated by: scripts/coccinelle/api/devm_platform_ioremap_resource.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: tmio: remove workaround for NON_REMOVABLEWolfram Sang
PM has been reworked, so eMMC gets now detected on R-Car H3 ES1.0 and 2.0 as well as M3-N without the workaround. Card detect and write protect also still work. Remove the workaround. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: Add Actions Semi Owl SoCs SD/MMC driverManivannan Sadhasivam
Add SD/MMC driver for Actions Semi Owl SoCs. This driver currently supports standard, high speed, SDR12, SDR25 and SDR50. DDR50 mode is supported but it is untested. There is no SDIO support for now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-milbeaut: add Milbeaut SD controller driverTakao Orito
SD Host controller on Milbeaut consists of two controller parts. One is core controller F_SDH30, this is similar to sdhci-fujitsu controller. Another is bridge controller. This bridge controller is not compatible with sdhci-fujitsu controller. This is special for Milbeaut series. This has some functions. For example, reset control, clock enable/select for SDR50/25/12, set property of SD physical pins, retuning control, set capabilityies. This bridge controller requires special procedures at reset or clock enablement or change for further tuning of clock. Signed-off-by: Takao Orito <orito.takao@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-pci: Quirk for AMD SDHC Device 0x7906Raul E Rangel
AMD SDHC 0x7906 requires a hard reset to clear all internal state. Otherwise it can get into a bad state where the DATA lines are always read as zeros. This change requires firmware that can transition the device into D3Cold for it to work correctly. If the firmware does not support transitioning to D3Cold then the power state transitions are a no-op. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci: Check card status after resetRaul E Rangel
In sdhci_do_reset we call the reset callback which is typically sdhci_reset. sdhci_reset can wait for up to 100ms waiting for the controller to reset. If SDHCI_RESET_ALL was passed as the flag, the controller will clear the IRQ mask. If during that 100ms the card is removed there is no notification to the MMC system that the card was removed. So from the drivers point of view the card is always present. By making sdhci_reinit compare the present state it can schedule a rescan if the card was removed while a reset was in progress. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.Yunhao Tian
The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by: Yunhao Tian <t123yh@outlook.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
2019-11-13tty: serial: msm_serial: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094618.1725-3-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13tty: serial: tegra: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094618.1725-4-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13tty: serial: amba-pl011: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094618.1725-2-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13serial-uartlite: Use allocated structure instead of static onesShubhrajyoti Datta
Remove the use of the static uartlite structure. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1573555271-2579-2-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13serial-uartlite: Change logic how console_port is setupShubhrajyoti Datta
Change logic how console_port is setup by using CON_ENABLED flag instead of index. There will be unique uart_console structure that's why code can't use id for console_port assignment. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1573555271-2579-1-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13tty: serial: pch_uart: correct usage of dma_unmap_sgPeng Fan
Per Documentation/DMA-API-HOWTO.txt, To unmap a scatterlist, just call: dma_unmap_sg(dev, sglist, nents, direction); .. note:: The 'nents' argument to the dma_unmap_sg call must be the _same_ one you passed into the dma_map_sg call, it should _NOT_ be the 'count' value _returned_ from the dma_map_sg call. However in the driver, priv->nent is directly assigned with value returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap, this breaks the API usage. So introduce a new entry orig_nent to remember 'nents'. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1573623259-6339-1-git-send-email-peng.fan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()Dmitry Torokhov
Instead of fwnode_get_named_gpiod() that I plan to hide away, let's use the new fwnode_gpiod_get_index() that mimics gpiod_get_index(), but works with arbitrary firmware node. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-13gpio: merrifield: Pass irqchip when adding gpiochipAndy Shevchenko
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-11-13gpio: merrifield: Add GPIO <-> pin mapping ranges via callbackAndy Shevchenko
When IRQ chip is instantiated via GPIO library flow, the few functions, in particular the ACPI event registration mechanism, on some of ACPI based platforms expect that the pin ranges are initialized to that point. Add GPIO <-> pin mapping ranges via callback in the GPIO library flow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-11-13gpiolib: Introduce ->add_pin_ranges() callbackAndy Shevchenko
When IRQ chip is being added by GPIO library, the ACPI based platform expects GPIO <-> pin mapping ranges to be initialized in order to correctly initialize ACPI event mechanism on affected platforms. Unfortunately this step is missed. Introduce ->add_pin_ranges() callback to fill the above mentioned gap. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2019-11-13drm/i915: Split a setting of MSA to MST and SSTGwan-gyeong Mun
The setting of MSA is done by the DDI .pre_enable() hook. And when we are using MST, the MSA is only set to first mst stream by calling of DDI .pre_eanble() hook. It raies issues to non-first mst streams. Wrong MSA or missed MSA packets might show scrambled screen or wrong screen. This splits a setting of MSA to MST and SST cases. And In the MST case it will call a setting of MSA after an allocating of Virtual Channel from MST encoder pre_enable callback. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212 Fixes: 0c06fa156006 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA") Fixes: d4a415dcda35 ("drm/i915: Fix MST oops due to MSA changes") Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> [vsyrjala: nuke spurious newline] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit bd8c9cca88765caee0dfa93967c6d8f16b4cbfb9) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191113125241.20547-1-ville.syrjala@linux.intel.com
2019-11-13gpio: mmio: remove untrue leftover commentMatti Vaittinen
The comment should have been removed when new GPIO direction definitions were taken in use as the function logic was changed. It is now perfectly valid and Ok to hit the return from the bottom of the direction getting function. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-11-13gpio: em: Use platform_get_irq() to obtain interruptsGeert Uytterhoeven
Use the platform_get_irq() helper instead of handling resources directly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-11-13backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-13Merge tag 'iio-for-5.5c' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support cleanups and fixes for the 5.5 cycle. New device support * ad5446 - Support the ad5600 DAC (id only needed). * ad7292 ADC DAC etc - New driver plus dt-bindings. * veml6030 ambient light sensor - New driver plus dt-bindings and sysfs docs. Features * mpu6050 - Explicit VDD control. * stm32-adc - Allow limiting of max clock frequency from devicetree to ensure it's suitable for external circuitry. yaml binding conversions * ltc1660 * mcp3911 Fixes * adis16480 - Fix wrong scale factors. - Fix debugfs reg access by providing the callback. * cros_ec_baro - Fixing missing mask entry to make available sample frequencies visible in sysfs. * st_lsm6dsx - Explicitly handle different ODR table sizes. - Handle restrictions between slave ODR and accel ODR when both are enabled. - Allow ODR to be expressed more accurately by using miliHz. * tools - Fix an issue with parallel builds. Cleanups and warning fixes * adis16136, adis16400, adis16460, adis-lib - Change some checks on return values to be for 0 rather than strictly negative. Avoids some fiddly issues with the compiler concluding some variables are initialized due to a mixture of error checks. - Assign values only on success of 'read' operations - avoiding any chance the compiler will falsly suggest they might be used uninitialized. - Whitespace and simlar cleanups. * aspeed adc - devm_platfom_ioremap_resource to reduce boilerplate. * bcm-iproc-adc - Stray semicolon removal. * cc10001 - devm_platfom_ioremap_resource to reduce boilerplate. * dln2-adc - Reorganise the buffered mode setup and tear down. Part of moving towards being able to refactor this area of the IIO core. * hdc100x - Reorganise the buffered mode setup and tear down. * ingenic-adc - devm_platfom_ioremap_resource to reduce boilerplate. * lpc18xx-adc - devm_platfom_ioremap_resource to reduce boilerplate. * lpc18xx-dac - devm_platfom_ioremap_resource to reduce boilerplate. * mt6577 - devm_platfom_ioremap_resource to reduce boilerplate. * npcm - devm_platfom_ioremap_resource to reduce boilerplate. * rcar-gyroadc - devm_platfom_ioremap_resource to reduce boilerplate. * spear-adc - devm_platfom_ioremap_resource to reduce boilerplate. * vf610-adc - devm_platfom_ioremap_resource to reduce boilerplate. * vf610-dac - devm_platfom_ioremap_resource to reduce boilerplate. * tag 'iio-for-5.5c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (43 commits) iio: adis16480: Add debugfs_reg_access entry iio: adis16480: Fix scales factors tools: iio: Correctly add make dependency for iio_utils iio: adc: Add driver support for AD7292 dt-bindings: iio: adc: Add dt-schema for AD7292 dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml iio: imu: mpu6050: Add support for vdd-supply regulator dt-bindings: iio: imu: mpu6050: add vdd-supply iio: cros_ec_baro: set info_mask_shared_by_all_available field iio: dac: ad5446: Add support for new AD5600 DAC dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml iio: documentation: light: Add veml6030 sysfs documentation dt-bindings: iio: light: add veml6030 ALS bindings iio: light: add driver for veml6030 ambient light sensor iio: imu: st_lsm6dsx: express odr in mHZ iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw iio: imu: st_lsm6dsx: explicitly define odr table size iio: adc: stm32: allow to tune analog clock dt-bindings: iio: stm32-adc: add max clock rate property iio: dac: vf610: Use devm_platform_ioremap_resource ...
2019-11-13parport: daisy: use new parport device modelSudip Mukherjee
Modify parport daisy driver to use the new parallel port device model. Last attempt was '1aec4211204d ("parport: daisy: use new parport device model")' which failed as daisy was also trying to load the low level driver and that resulted in a deadlock. Cc: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20191016144540.18810-4-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: load lowlevel driver if ports not foundSudip Mukherjee
Usually all the distro will load the parport low level driver as part of their initialization. But we can get into a situation where all the parallel port drivers are built as module and we unload all the modules at a later time. Then if we just do "modprobe parport" it will only load the parport module and will not load the low level driver which will actually register the ports. So, check the bus if there is any parport registered, if not, load the low level driver. We can get into the above situation with all distro but only Suse has setup the alias for "parport_lowlevel" and so it only works in Suse. Users of Debian based distro will need to load the lowlevel module manually. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: do not check portlist when using device-modelSudip Mukherjee
We do not need to maintain a list of ports when we are using the device-model. The base layer is going to maintain the list for us and we can get the list of ports just using bus_for_each_dev(). Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-2-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: daisy: avoid hardcoded nameSudip Mukherjee
The daisy device name is hardcoded, define it in the header file and use it in the code. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13lp: fix sparc64 LPSETTIMEOUT ioctlArnd Bergmann
The layout of struct timeval is different on sparc64 from anything else, and the patch I did long ago failed to take this into account. Change it now to handle sparc64 user space correctly again. Quite likely nobody cares about parallel ports on sparc64, but there is no reason not to fix it. Cc: stable@vger.kernel.org Fixes: 9a450484089d ("lp: support 64-bit time_t user space") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-7-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13ppdev: fix PPGETTIME/PPSETTIME ioctlsArnd Bergmann
Going through the uses of timeval in the user space API, I noticed two bugs in ppdev that were introduced in the y2038 conversion: * The range check was accidentally moved from ppsettime to ppgettime * On sparc64, the microseconds are in the other half of the 64-bit word. Fix both, and mark the fix for stable backports. Cc: stable@vger.kernel.org Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13Revert "mfd: syscon: Set name of regmap_config"Andy Shevchenko
This reverts commit 500f9ff518cf55930c670b0e2b8901caf70a7548. The original commit is a duplication of the exactly previously added commit 408d1d570a63 ("mfd: syscon: Set regmap name to DT node name"). Revert the unnecessary later one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-11-13tty: serial: imx: use the sg count from dma_map_sgPeng Fan
The dmaengine_prep_slave_sg needs to use sg count returned by dma_map_sg, not use sport->dma_tx_nents, because the return value of dma_map_sg is not always same with "nents". Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13Remove every trace of SERIAL_MAGICPascal Terjan
This means removing support for checking magic in amiserial.c (SERIAL_PARANOIA_CHECK option), which was checking a magic field which doesn't currently exist in the struct. That code hasn't built at least since git. Removing the definition from the header is safe anyway as that code was from another driver and not including it. Signed-off-by: Pascal Terjan <pterjan@google.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20191105192749.67533-1-pterjan@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()Suwan Kim
Smatch reported that nents is not initialized and used in stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc() and used to allocate multiple URBs when host controller doesn't support scatter-gather DMA. The use of uninitialized nents means that buf_len is zero and use_sg is true. But buffer length should not be zero when an URB uses scatter-gather DMA. To prevent this situation, add the conditional that checks buf_len and use_sg. And move the use of nents right after the sgl_alloc() to avoid the use of uninitialized nents. If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be released by stub event handler and connection will be shut down. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()Ulf Hansson
The intent with walking the gpd_list via calling genpd_present() from genpd_syscore_switch(), is to make sure the dev->pm_domain pointer belongs to a registered genpd. However, as a genpd can't be removed if there is a device attached to it, let's convert to use the quicker dev_to_genpd_safe() instead. Due to the above change, this allows us to clean up genpd_present() and move it inside CONFIG_PM_GENERIC_DOMAINS_OF, so let's do that as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13mmc: tmio: Avoid boilerplate code in ->runtime_suspend()Ulf Hansson
Rather than checking the 'runtime_synced' flag each time the ->runtime_suspend() callback is invoked, let's convert into using dev_pm_domain_start() during ->probe() and drop the corresponding boilerplate code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13PM / Domains: Implement the ->start() callback for genpdUlf Hansson
To allow a subsystem/driver to explicitly start its device from genpd's point view, let's implement the ->start() callback in the struct dev_pm_domain that corresponds to the genpd. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13PM / Domains: Introduce dev_pm_domain_start()Ulf Hansson
For a subsystem/driver that either doesn't support runtime PM or makes use of pm_runtime_set_active() during ->probe(), may try to access its device when probing, even if it may not be fully powered on from the PM domain's point of view. This may be the case when the used PM domain is a genpd provider, that implements genpd's ->start|stop() device callbacks. There are cases where the subsystem/driver managed to avoid the above problem, simply by calling pm_runtime_enable() and pm_runtime_get_sync() during ->probe(). However, this approach comes with a drawback, especially if the subsystem/driver implements a ->runtime_resume() callback. More precisely, the subsystem/driver then needs to use a device flag, which is checked in its ->runtime_resume() callback, as to avoid powering on its resources the first time the callback is invoked. This is needed because the subsystem/driver has already powered on the resources for the device, during ->probe() and before it called pm_runtime_get_sync(). In a way to avoid this boilerplate code and the inefficient check for "if (first_time_suspend)" in the ->runtime_resume() callback for these subsystems/drivers, let's introduce and export a dev_pm_domain_start() function, that may be called during ->probe() instead. Moreover, let the dev_pm_domain_start() invoke an optional ->start() callback, added to the struct dev_pm_domain, as to allow a PM domain specific implementation. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13PM / wakeirq: remove unnecessary parenthesesXiaofei Tan
Remove unnecessary parentheses found by code review. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13drm/i915/execlists: Move reset_active() from schedule-out to schedule-inChris Wilson
The gem_ctx_persistence/smoketest was detecting an odd coherency issue inside the LRC context image; that the address of the ring buffer did not match our associated struct intel_ring. As we set the address into the context image when we pin the ring buffer into place before the context is active, that leaves the question of where did it get overwritten. Either the HW context save occurred after our pin which would imply that our idle barriers are broken, or we overwrote the context image ourselves. It is only in reset_active() where we dabble inside the context image outside of a serialised path from schedule-out; but we could equally perform the operation inside schedule-in which is then fully serialised with the context pin -- and remains serialised by the engine pulse with kill_context(). (The only downside, aside from doing more work inside the engine->active.lock, was the plan to merge all the reset paths into doing their context scrubbing on schedule-out needs more thought.) Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out") Testcase: igt/gem_ctx_persistence/smoketest Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk (cherry picked from commit 31b61f0ef9af62b6404d8df5dcd2cf58f80c9f53) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-13power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() callGeert Uytterhoeven
There is no need to cast a typed pointer to a void pointer when calling a function that accepts the latter. Remove it, as the cast prevents further compiler checks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13ACPI: OSI: Shoot duplicate wordCao jin
"this" is duplicated. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-12Merge tag 'soc-fsl-next-v5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.5 RCPM driver for ARM SoCs - add RCPM driver to manage the wakeup devices for QorIQ ARM SoCs (HW low power states are supported in PSCI firmware) - add API to PM wakeup framework to retrieve wakeup sources * tag 'soc-fsl-next-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition PM: wakeup: Add routine to help fetch wakeup source object. Link: https://lore.kernel.org/r/1573599595-31411-1-git-send-email-leoyang.li@nxp.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-13PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-infoTyrel Datwyler
The newer ibm,drc-info property is a condensed description of the old ibm,drc-* properties (ie. names, types, indexes, and power-domains). When matching a drc-index to a drc-name we need to verify that the index is within the start and last drc-index range and map it to a drc-name using the drc-name-prefix and logical index. Fix the mapping by checking that the index is within the range of the current drc-info entry, and build the name from the drc-name-prefix concatenated with the starting drc-name-suffix value and the sequential index obtained by subtracting ibm,my-drc-index from this entries drc-start-index. Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-10-git-send-email-tyreld@linux.ibm.com
2019-11-13PCI: rpaphp: Annotate and correctly byte swap DRC propertiesTyrel Datwyler
The device tree is in big endian format and any properties directly retrieved using OF helpers that don't explicitly byte swap should be annotated. In particular there are several places where we grab the opaque property value for the old ibm,drc-* properties and the ibm,my-drc-index property. Fix this for better static checking by annotating values we know to explicitly big endian, and byte swap where appropriate. Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.com
2019-11-13PCI: rpaphp: Add drc-info support for hotplug slot registrationTyrel Datwyler
Split physical PCI slot registration scanning into separate routines that support the old ibm,drc-* properties and one that supports the new compressed ibm,drc-info property. Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-7-git-send-email-tyreld@linux.ibm.com
2019-11-13PCI: rpaphp: Don't rely on firmware feature to imply drc-info supportTyrel Datwyler
In the event that the partition is migrated to a platform with older firmware that doesn't support the ibm,drc-info property the device tree is modified to remove the ibm,drc-info property and replace it with the older style ibm,drc-* properties for types, names, indexes, and power-domains. One of the requirements of the drc-info firmware feature is that the client is able to handle both the new property, and old style properties at runtime. Therefore we can't rely on the firmware feature alone to dictate which property is currently present in the device tree. Fix this short coming by checking explicitly for the ibm,drc-info property, and falling back to the older ibm,drc-* properties if it doesn't exist. Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-6-git-send-email-tyreld@linux.ibm.com
2019-11-13PCI: rpaphp: Fix up pointer to first drc-info entryTyrel Datwyler
The first entry of the ibm,drc-info property is an int encoded count of the number of drc-info entries that follow. The "value" pointer returned by of_prop_next_u32() is still pointing at the this value when we call of_read_drc_info_cell(), but the helper function expects that value to be pointing at the first element of an entry. Fix up by incrementing the "value" pointer to point at the first element of the first drc-info entry prior. Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573449697-5448-5-git-send-email-tyreld@linux.ibm.com
2019-11-12net: bcmgenet: Add RGMII_RXID supportStefan Wahren
This adds the missing support for the PHY mode RGMII_RXID. It's necessary for the Raspberry Pi 4. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Refactor register access in bcmgenet_mii_configStefan Wahren
The register access in bcmgenet_mii_config() is a little bit opaque and not easy to extend. In preparation for the missing RGMII PHY modes move all the phy name assignments into the switch statement and the register access to the end of the function. This make the code easier to read and extend. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Add BCM2711 supportStefan Wahren
The BCM2711 needs a different maximum DMA burst length. If not set accordingly a timeout in the transmit queue happens and no package can be sent. So use the new compatible to derive this value. Until now the GENET HW version was used as the platform identifier. This doesn't work with SoC-specific modifications, so introduce a proper platform data structure. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: bcmgenet: Fix error handling on IRQ retrievalStefan Wahren
This fixes the error handling for the mandatory IRQs. There is no need for the error message anymore, this is now handled by platform_get_irq. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-26 18:52:48 +0000