| Age | Commit message (Collapse) | Author |
|---|
|
A read-only mapping should be usable with read-only OSD caps, so
neither the header lock nor the object map lock can be acquired.
Unfortunately, this means that images mapped read-only lose the
advantage of the object map.
Snapshots, however, can take advantage of the object map without
any exclusionary locks, so if the object map is desired, snapshot
the image and map the snapshot instead of the image.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
If an image is mapped read-only, don't allow setting its partition(s)
to read-write via BLKROSET: with the previous patch all writes to such
images are failed anyway.
If an image is mapped read-write, its partition(s) can be set to
read-only (and back to read-write) as before. Note that at the rbd
level the image will remain writeable: anything sent down by the block
layer will be executed, including any write from internal kernel users.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Even though -o ro/-o read_only/--read-only options are very old, we
have never really treated them seriously (on par with snapshots). As
a first step, fail writes to images mapped read-only just like we do
for snapshots.
We need this check in rbd because the block layer basically ignores
read-only setting, see commit a32e236eb93e ("Partially revert "block:
fail op_is_write() requests to read-only partitions"").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
rbd_dev->opts is not available for parent images, making checking
rbd_dev->opts->read_only in various places (rbd_dev_image_probe(),
need_exclusive_lock(), use_object_map() in the following patches)
harder than it needs to be.
Keeping rbd_dev_image_probe() in mind, move the initialization in
do_rbd_add() up. snap_id isn't filled in at that point, so replace
rbd_is_snap() with a snap_name comparison.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
There is a spelling mistake in a debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In the implementation of sync_file_merge() the allocated sync_file is
leaked if number of fences overflows. Release sync_file by goto err.
Fixes: a02b9dc90d84 ("dma-buf/sync_file: refactor fence storage in struct sync_file")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122220957.30427-1-navid.emamdoost@gmail.com
|
|
CONFIG_REFCOUNT_FULL no longer exists, so remove all references to it.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191121115902.2551-11-will@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The generic implementation of refcount_t should be good enough for
everybody, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely,
leaving the generic implementation enabled unconditionally.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191121115902.2551-9-will@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The REFCOUNT_FULL implementation uses a different saturation point than
the x86 implementation, which means that the shared refcount code in
lib/refcount.c (e.g. refcount_dec_not_one()) needs to be aware of the
difference.
Rather than duplicate the definitions from the lkdtm driver, instead
move them into <linux/refcount.h> and update all references accordingly.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191121115902.2551-2-will@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2019-11-24
Here's one last bluetooth-next pull request for the 5.5 kernel:
- Fix BDADDR_PROPERTY & INVALID_BDADDR quirk handling
- Added support for BCM4334B0 and BCM4335A0 controllers
- A few other smaller fixes related to locking and memory leaks
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
This enables the use of SW timestamping.
ax88179_178a uses the usbnet transmit function usbnet_start_xmit() which
implements software timestamping. ax88179_178a overrides ethtool_ops but
missed to set .get_ts_info. This caused SOF_TIMESTAMPING_TX_SOFTWARE
capability to be not available.
Signed-off-by: Andreas K. Besslein <besslein.andreas@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
When mlxsw_sp_adj_discard_write() is called for the first time, the
value stored in 'mlxsw_sp->router->adj_discard_index' is invalid, as
indicated by 'mlxsw_sp->router->adj_discard_index_valid' being set to
'false'.
In this case, we should not use the value initially stored in
'mlxsw_sp->router->adj_discard_index' (0) and instead use the value
allocated later in the function.
Fixes: 983db6198f0d ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
When a GRE tunnel is bound to an underlay netdevice and that netdevice is
moved to a different VRF, that could cause two tunnels to have the same
underlay local address in the same VRF. Linux in this situation dispatches
the traffic according to the tunnel key (or lack thereof), but that cannot
be offloaded to Spectrum devices.
Detect this situation and unoffload the two impacted tunnels when it
happens.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Use the same bnxt_flash_package_from_file() function to support
devlink flash operation.
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Currently, the driver does not allow PHY settings on a multi-function or
NPAR NIC whose port is shared by more than one function. Newer
firmware now allows PHY settings on some of these NICs. Check for
this new firmware setting and allow the user to set the PHY settings
accordingly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
If the link settings have been changed by another function sharing the
port, firmware will send us an async. message. In response, we will
call the new bnxt_init_ethtool_link_settings() function to update
the current settings.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Refactor this logic in bnxt_probe_phy() into a separate function
bnxt_init_ethtool_link_settings(). It used to be that the settable
link settings will never be changed without going through ethtool.
So we only needed to do this once in bnxt_probe_phy(). Now, another
function sharing the port may change it and we may need to re-initialize
the ethtool settings again in run-time.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
New firmware allows PHY loopback to be set without disabling autoneg
first. Check this capability and skip disabling autoneg when
it is supported by firmware. Using this scheme, loopback will
always work even if the PHY only supports autoneg.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
The driver currently only assignes 1 RSS context to each VF. This works
for the Linux VF driver. But other drivers, such as DPDK, can make use
of additional RSS contexts. Modify the code to divide up and assign
RSS contexts to VFs just like other resources.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Some chips that need host context memory as a backing store requires
the memory to be initialized to a non-zero value. Query the
value from firmware and initialize the context memory accordingly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Driver calls HWRM_FUNC_RESET firmware call while resuming the device
which clears the context memory backing store. Because of which
allocating firmware resources would eventually fail. Fix it by freeing
all context memory during suspend and reallocate the memory during resume.
Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call
is needed on the 57500 chips so that firmware will set up the proper
queue mapping in relation to the context memory.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
After driver unregister, firmware is erasing the information that
driver supports new resource management. Send FUNC_RESOURCE_QCAPS
command to inform the firmware that driver supports new resource
management while resuming from hibernation. Otherwise, we fallback
to the older resource allocation scheme.
Also, move driver register after sending FUNC_RESOURCE_QCAPS command
to be consistent with the normal initialization sequence.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Everytime driver registers with firmware, driver is required to
register for async event notifications as well. These 2 calls
are done using the same firmware command and can be combined.
We are also missing the 2nd step to register for async events
in the suspend/resume path and this will fix it. Prior to this,
we were getting only default notifications.
ULP can register for additional async events for the RDMA driver,
so we add a parameter to the new function to only do step 2 when
it is called from ULP.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
In the bnxt_init_one() failure path, if the driver has already called
firmware to register the driver, it is not undoing the driver
registration. Add this missing step to unregister for correctness,
so that the firmware knows that the driver has unloaded.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Disable Bus master during suspend to prevent DMAs after the device
goes into D3hot state. The new 57500 devices may continue to DMA
from context memory after the system goes into D3hot state. This
may cause some PCIe errors on some system. Re-enable it during resume.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so
that these chips will be properly classified as P4 chips to take
advantage of the P4 fixes and features.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL.
Ethtool stats which access those need to be as well.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ca70bd423f10 ("sfc: add statistics for ARFS")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The recording of RSS hash should be controlled by NETIF_F_RXHASH.
Fixes: 1fac7ca4e63b ("hv_netvsc: record hardware hash in skb")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-11-22
1) Misc Cleanups
2) Software steering support for Geneve
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Rename the mac_link_state() method to mac_pcs_get_state() to make it
clear that it should be returning the MACs PCS current state, which
is used for inband negotiation rather than just reading back what the
MAC has been configured for. Update the documentation to explicitly
mention that this is for inband.
We drop the return value as well; most of phylink doesn't check the
return value and it is not clear what it should do on error - instead
arrange for state->link to be false.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
gntdev simply wants to monitor a specific VMA for any notifier events,
this can be done straightforwardly using mmu_interval_notifier_insert()
over the VMA's VA range.
The notifier should be attached until the original VMA is destroyed.
It is unclear if any of this is even sane, but at least a lot of duplicate
code is removed.
Link: https://lore.kernel.org/r/20191112202231.3856-15-jgg@ziepe.ca
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Convert the collision-retry lock around hmm_range_fault to use the one now
provided by the mmu_interval notifier.
Although this driver does not seem to use the collision retry lock that
hmm provides correctly, it can still be converted over to use the
mmu_interval_notifier api instead of hmm_mirror without too much trouble.
This also deletes another place where a driver is associating additional
data (struct amdgpu_mn) with a mmu_struct.
Link: https://lore.kernel.org/r/20191112202231.3856-13-jgg@ziepe.ca
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove the interval tree in the driver and rely on the tree maintained by
the mmu_notifier for delivering mmu_notifier invalidation callbacks.
For some reason amdgpu has a very complicated arrangement where it tries
to prevent duplicate entries in the interval_tree, this is not necessary,
each amdgpu_bo can be its own stand alone entry. interval_tree already
allows duplicates and overlaps in the tree.
Also, there is no need to remove entries upon a release callback, the
mmu_interval API safely allows objects to remain registered beyond the
lifetime of the mm. The driver only has to stop touching the pages during
release.
Link: https://lore.kernel.org/r/20191112202231.3856-12-jgg@ziepe.ca
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
find_vma() must be called under the mmap_sem, reorganize this code to
do the vma check after entering the lock.
Further, fix the unlocked use of struct task_struct's mm, instead use
the mm from hmm_mirror which has an active mm_grab. Also the mm_grab
must be converted to a mm_get before acquiring mmap_sem or calling
find_vma().
Fixes: 66c45500bfdc ("drm/amdgpu: use new HMM APIs and helpers")
Fixes: 0919195f2b0d ("drm/amdgpu: Enable amdgpu_ttm_tt_get_user_pages in worker threads")
Link: https://lore.kernel.org/r/20191112202231.3856-11-jgg@ziepe.ca
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove the hmm_mirror object and use the mmu_interval_notifier API instead
for the range, and use the normal mmu_notifier API for the general
invalidation callback.
While here re-organize the pagefault path so the locking pattern is clear.
nouveau is the only driver that uses a temporary range object and instead
forwards nearly every invalidation range directly to the HW. While this is
not how the mmu_interval_notifier was intended to be used, the overheads on
the pagefaulting path are similar to the existing hmm_mirror version.
Particularly since the interval tree will be small.
Link: https://lore.kernel.org/r/20191112202231.3856-10-jgg@ziepe.ca
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
There is no reason to get the invalidate_range_start() callback via an
indirection through hmm_mirror, just register a normal notifier directly.
Link: https://lore.kernel.org/r/20191112202231.3856-9-jgg@ziepe.ca
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The new API is an exact match for the needs of radeon.
For some reason radeon tries to remove overlapping ranges from the
interval tree, but interval trees (and mmu_interval_notifier_insert())
support overlapping ranges directly. Simply delete all this code.
Since this driver is missing a invalidate_range_end callback, but
still calls get_user_pages(), it cannot be correct against all races.
Link: https://lore.kernel.org/r/20191112202231.3856-8-jgg@ziepe.ca
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This converts one of the two users of mmu_notifiers to use the new API.
The conversion is fairly straightforward, however the existing use of
notifiers here seems to be racey.
Link: https://lore.kernel.org/r/20191112202231.3856-7-jgg@ziepe.ca
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Replace the internal interval tree based mmu notifier with the new common
mmu_interval_notifier_insert() API. This removes a lot of code and fixes a
deadlock that can be triggered in ODP:
zap_page_range()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem)
unmap_single_vma()
[..]
__split_huge_page_pmd()
mmu_notifier_invalidate_range_start()
[..]
ib_umem_notifier_invalidate_range_start()
down_read(&per_mm->umem_rwsem) // DEADLOCK
mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)
mmu_notifier_invalidate_range_end()
up_read(&per_mm->umem_rwsem)
The umem_rwsem is held across the range_start/end as the ODP algorithm for
invalidate_range_end cannot tolerate changes to the interval
tree. However, due to the nested invalidation regions the second
down_read() can deadlock if there are competing writers. The new core code
provides an alternative scheme to solve this problem.
Fixes: ca748c39ea3f ("RDMA/umem: Get rid of per_mm->notifier_count")
Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.ca
Tested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull last minute virtio bugfixes from Michael Tsirkin:
"Minor bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix shrinker count
virtio_balloon: fix shrinker scan number of pages
virtio_console: allocate inbufs in add_port() only if it is needed
virtio_ring: fix return code on DMA mapping fails
|
|
rhashtable_lookup_fast() internally calls rcu_read_lock() then,
calls rhashtable_lookup(). So if rcu_read_lock() is already held,
rhashtable_lookup() is enough.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.5
Last set of patches for v5.5. Major features here 802.11ax support for
qtnfmac and airtime fairness support to mt76. And naturally smaller
fixes and improvements all over.
Major changes:
qtnfmac
* add 802.11ax support in AP mode
* enable offload bridging support
iwlwifi
* support TX/RX antennas reporting
mt76
* mt7615 smart carrier sense support
* aggregation statistics via debugfs
* airtime fairness (ATF) support
* mt76x0 OF mac address support
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"
when the speed and duplex settings are printed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
There are no users of phy_ethtool_sset() in the kernel anymore, and
as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize
and supported from u32 to link mode"), the implementation is slightly
buggy - it doesn't correctly check the masked advertising mask as it
used to.
Remove it, and update the phy documentation to refer to its replacement
function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Do not try to handle keycodes that are too big, otherwise we risk doing
out-of-bounds writes:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
In this case we were dealing with a fuzzed HID device that declared over
12K buttons, and while HID layer should not be reporting to us such big
keycodes, we should also be defensive and reject invalid data ourselves as
well.
Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122204220.GA129459@dtor-ws
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch exports standard hwmon pwmX_enable sysfs attribute for
enabling or disabling automatic fan control by BIOS. Standard value
"1" is for disabling automatic BIOS fan control and value "2" for
enabling.
By default BIOS auto mode is enabled by laptop firmware.
When BIOS auto mode is enabled, custom fan speed value (set via hwmon
pwmX sysfs attribute) is overwritten by SMM in few seconds and
therefore any custom settings are without effect. So this is reason
why implementing option for disabling BIOS auto mode is needed.
So finally this patch allows kernel to set and control fan speed on
laptops, but it can be dangerous (like setting speed of other fans).
The SMM commands to enable or disable automatic fan control are not
documented and are not the same on all Dell laptops. Therefore a
whitelist is used to send the correct codes only on laptopts for which
they are known.
This patch was originally developed by Pali Rohár; later Giovanni
Mascellani implemented the whitelist.
Signed-off-by: Giovanni Mascellani <gio@debian.org>
Co-Developed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://lore.kernel.org/r/20191122101519.1246458-1-gio@debian.org
[groeck: Fixed checkpatch warnings]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If there's no traffic on a channel, its ARFS expiry work will never get
scheduled by efx_poll() as that isn't being run.
So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Report the number of successful and failed insertions, and also the
current count of filters, to aid in tuning e.g. rps_flow_cnt.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
