| Age | Commit message (Collapse) | Author |
|---|
|
Instead of including a huge device.h with tons of dependencies
include only what driver actually uses.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For consistency with most other code that can access requested
descriptors: read the flags once atomically and then test individual
bits from the helper variable. This avoids any potential discrepancies
should flags change during the debug print.
Link: https://lore.kernel.org/r/20250215100847.30136-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As per the API contract, the get_direction() callback can only
return 0, 1 or a negative error number. Add a wrapper around the callback
calls that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-8-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The return value of the direction_input() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-7-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The return value of the direction_output() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-6-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As per the API contract, the get_multiple() callback is only allowed to
return 0 or a negative error number. Filter out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-5-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As per the API contract, the get() callback is only allowed to return 0,
1 or a negative error number. Add a wrapper around the callback calls
that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-4-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The return value of the set_config() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-3-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The return value of the request() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-2-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into HEAD
Linux 6.14-rc4
|
|
With v6.11+, we can actually call hid_hw_output_report() and put the device
into raw mode, thus getting accurate events without being messed up.
Technically we could do the same on v6.10, but given that wayland, gnome
and KDE are still not capable of handling the dial, and that v6.10 is EOL,
we can safely save a little bit of compilation by only allowing v6.11+.
We can easily export the battery information to userspace by adding a
dedicated report. However, we need to cheat on the kernel to force it
not to query the battery by making the physical collection a stylus. The
kernel will then only rely on the events it gets from the device.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/133
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-7-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The purpose is to simplify the use of bpf_wq to defer blocking
operations in a sleepable context. Compared to a more "classic"
async approach, there is no sync mechanism to wait for the async
to finish.
The "simple" API is the following:
```
static int HID_BPF_ASYNC(async_fun)(struct hid_bpf_ctx *hctx)
{
bpf_printk("%s", __fun__);
return 0;
}
SEC("syscall")
int probe(struct hid_bpf_probe_args *ctx)
{
ctx->retval = HID_BPF_ASYNC_INIT(async_fun);
return 0;
}
SEC(HID_BPF_DEVICE_EVENT)
int BPF_PROG(event_handler, struct hid_bpf_ctx *hctx)
{
/* async_fun() can be called now, it's not a sleepable
* function in this example
*/
async_fun(hctx);
/* but we can also delay the call by 10 ms */
HID_BPF_ASYNC_DELAYED_CALL(async_fun, hctx, 10);
return 0;
}
HID_BPF_OPS(xppen_ack05_remote) = {
.hid_device_event = (void *)event_handler,
};
```
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/133
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-6-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
These kfunc are all in v6.10 except for the hid_bpf_try_input_report()
which will be in v6.11. Import their definition once now so we can make
use of it.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/114
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-5-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The device behaves the same than the 16" and 14" models, so let's just
add support for it too.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/145
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-4-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This adds an updated HID descriptor for the Huion Kamvas Pro 19 that is
present on newer firmware revisions, while also trying to keep
compat with the older versions.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/164
Signed-off-by: Aki Van Ness <aki@lethalbit.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-3-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The TUXEDO Sirius 16 Gen1 and the TUXEDO Sirius 16 Gen2 Notebooks have an
additional "fan" key next to F12.
Pressing it alone sends a F14 key press which can be bound by user space.
Pressing it while holding the FN key triggers two things:
- The EC firmware locks the fan speed of the internal fans at 100%
- F13 key press is registered which by default is already bound in xkb and
desktop environments (e.g. in KDE Plasma it launches system settings)
To avoid this unexpected double duty of the FN shortcut, this bpf program
suppresses the F13 key press.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/166
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-2-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This re-uses the same HID report descriptor that we also use for
the tablet mode after switching the device. The keys send uniquely
identifyable shortcuts so we can map those to buttons.
However the dial and the button inside the dial send events on a
different hidraw node and they are unreliable (e.g. the button does not
get released reliably). So they're ignored in this patch, it's not
worth the effort getting those to work correctly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/158
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-1-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
amd_pstate_update_limits
There is no need to take a driver wide lock while updating the
highest_perf value in the percpu cpudata struct. Hence remove it.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-13-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
There have been instances in past where refcount decrementing is missed
while exiting a function. Use automatic scope based cleanup to avoid
such errors.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-12-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Check if policy is NULL before dereferencing it in amd_pstate_update.
Fixes: e8f555daacd3 ("cpufreq/amd-pstate: fix setting policy current frequency value")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-11-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The update_limits callback is only called in two conditions.
* When the preferred core rankings change. In which case, we just need to
change the prefcore ranking in the cpudata struct. As there are no changes
to any of the perf values, there is no need to call cpufreq_update_policy()
* When the _PPC ACPI object changes, i.e. the highest allowed Pstate
changes. The _PPC object is only used for a table based cpufreq driver
like acpi-cpufreq, hence is irrelevant for CPPC based amd-pstate.
Hence, the cpufreq_update_policy() call becomes unnecessary and can be
removed.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-9-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Delegate the perf<->frequency conversion to helper functions to reduce
code duplication, and improve readability.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-8-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
All perf values are always within 0-255 range, hence convert their
datatype to u8 everywhere.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-7-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Currently, amd_pstate_update_freq passes the hardware perf limits as
min/max_perf to amd_pstate_update, which eventually gets programmed into
the min/max_perf fields of the CPPC_REQ register.
Instead pass the effective perf limits i.e. min/max_limit_perf values to
amd_pstate_update as min/max_perf.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-6-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
des_perf is later on clamped between min_perf and max_perf in
amd_pstate_update. So, remove the redundant clamping from
amd_pstate_adjust_perf.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-5-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Instead of setting a fixed floor at lowest_nonlinear_perf, use the
min_limit_perf value, so that it gives the user the freedom to lower the
floor further.
There are two minimum frequency/perf limits that we need to consider in
the adjust_perf callback. One provided by schedutil i.e. the sg_cpu->bw_min
value passed in _min_perf arg, another is the effective value of
min_freq_qos request that is updated in cpudata->min_limit_perf. Modify the
code to use the bigger of these two values.
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-4-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Have qcom_edac use the correct interrupt enable register to configure
the RAS interrupt lines
* tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/qcom: Correct interrupt enable register configuration
|
|
According to the UEFI Common Platform Error Record appendix, the
processor context information structure is a variable length structure,
but "is padded with zeros if the size is not a multiple of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
According to the UEFI Common Platform Error Record appendix, the
IA32/X64 Processor Context Information Structure is a variable length
structure, but "is padded with zeros if the size is not a multiple
of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When there is a failure during bind QP, the cleanup flow destroys the
counter regardless if it is the one that created it or not, which is
problematic since if it isn't the one that created it, that counter could
still be in use.
Fix that by destroying the counter only if it was created during this call.
Fixes: 45842fc627c7 ("IB/mlx5: Support statistic q counter configuration")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://patch.msgid.link/25dfefddb0ebefa668c32e06a94d84e3216257cf.1740033937.git.leon@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d37799 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix miscellaneous irqchip bugs"
* tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-pdc: Workaround hardware register bug on X1E80100
irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request
irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
|
|
When CONFIG_PCI_P2PDMA=y (which is basically enabled on all
large x86 distros), it maps the PFN's via a ZONE_DEVICE
mapping using devm_memremap_pages(). The mapped virtual
address range corresponds to the pci_resource_start()
of the BAR address and size corresponding to the BAR length.
When KASLR is enabled, the direct map range of the kernel is
reduced to the size of physical memory plus additional padding.
If the BAR address is beyond this limit, PCI peer to peer DMA
mappings fail.
Fix this by not shrinking the size of the direct map when
CONFIG_PCI_P2PDMA=y.
This reduces the total available entropy, but it's better than
the current work around of having to disable KASLR completely.
[ mingo: Clarified the changelog to point out the broad impact ... ]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/Kconfig
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/lkml/20250206023201.1481957-1-balbirs@nvidia.com/
Link: https://lore.kernel.org/r/20250206234234.1912585-1-balbirs@nvidia.com
--
arch/x86/mm/kaslr.c | 10 ++++++++--
drivers/pci/Kconfig | 6 ++++++
2 files changed, 14 insertions(+), 2 deletions(-)
|
|
In allegro_probe(), the v4l2 device is not unregistered in the error
path, which results in a memory leak. Fix it by calling
v4l2_device_unregister() before returning error.
Fixes: d74d4e2359ec ("media: allegro: move driver out of staging")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Change headres_size to headers_size.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The HEVC driver needs to set the start_bit field explicitly to avoid
causing corrupted frames when the VP9 decoder is used in parallel. The
reason for this problem is that the VP9 and the HEVC decoder share this
register.
Fixes: cb5dd5a0fa51 ("media: hantro: Introduce G2/HEVC decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’:
drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=]
2544 | }
| ^
Fix this by allocating the temporary client structure dynamically, as it
is a rather large structure (1216 bytes, depending on kernel config).
This is basically a revert of the to-be-fixed commit with some
checkpatch improvements.
Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[wsa: updated commit message, merged tags from similar patch]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Return linux-friendly error codes from hypercall helper functions,
which allows them to be used more flexibly.
Introduce hv_result_to_errno() for this purpose, which also handles
the special value U64_MAX returned from hv_do_hypercall().
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Stats calculations involve a RMW to add the stat update to the existing
value. This is currently not protected by any synchronization mechanism,
so data races are possible. Add a spinlock to protect the update. The
reader side could be protected using u64_stats, but we would still need
a spinlock for the update side anyway. And we always do an update
immediately before reading the stats anyway.
Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that ipvlan_process_v6_outbound() was assuming
the IPv6 network header isis present in skb->head [1]
Add the needed pskb_network_may_pull() calls for both
IPv4 and IPv6 handlers.
[1]
BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
__ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
ipv6_addr_type include/net/ipv6.h:555 [inline]
ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline]
ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651
ip6_route_output include/net/ip6_route.h:93 [inline]
ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476
ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline]
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline]
ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671
ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223
__netdev_start_xmit include/linux/netdevice.h:5150 [inline]
netdev_start_xmit include/linux/netdevice.h:5159 [inline]
xmit_one net/core/dev.c:3735 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751
sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343
qdisc_restart net/sched/sch_generic.c:408 [inline]
__qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416
qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127
net_tx_action+0x78b/0x940 net/core/dev.c:5484
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611
dev_queue_xmit include/linux/netdevice.h:3311 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3132 [inline]
packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164
sock_sendmsg_nosec net/socket.c:718 [inline]
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Reported-by: syzbot+93ab4a777bafb9d9f960@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67b74f01.050a0220.14d86d.02d8.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Link: https://patch.msgid.link/20250220155336.61884-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev")
IPv4 neighbors can be constructed on the blackhole net device, but they
are constructed with an output function (neigh_direct_output()) that
simply calls dev_queue_xmit(). The latter will transmit packets via
'skb->dev' which might not be the blackhole net device if dst_dev_put()
switched 'dst->dev' to the blackhole net device while another CPU was
using the dst entry in ip_output(), but after it already initialized
'skb->dev' from 'dst->dev'.
Specifically, the following can happen:
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb() [...]
ip_output()
skb->dev = skb_dst(skb)->dev
dst_dev_put()
dst->dev = blackhole_netdev
ip_finish_output2()
resolves neigh on dst->dev
neigh_output()
neigh_direct_output()
dev_queue_xmit()
This will result in IPv4 packets being sent without an Ethernet header
via a valid net device:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on enp9s0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
22:07:02.329668 20:00:40:11:18:fb > 45:00:00:44:f4:94, ethertype Unknown
(0x58c6), length 68:
0x0000: 8dda 74ca f1ae ca6c ca6c 0098 969c 0400 ..t....l.l......
0x0010: 0000 4730 3f18 6800 0000 0000 0000 9971 ..G0?.h........q
0x0020: c4c9 9055 a157 0a70 9ead bf83 38ca ab38 ...U.W.p....8..8
0x0030: 8add ab96 e052 .....R
Fix by making sure that neighbors are constructed on top of the
blackhole net device with an output function that simply consumes the
packets, in a similar fashion to dst_discard_out() and
blackhole_netdev_xmit().
Fixes: 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev")
Reported-by: Florian Meister <fmei@sfs.com>
Closes: https://lore.kernel.org/netdev/20250210084931.23a5c2e4@hermes.local/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250220072559.782296-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: Always allow SCO packets for user channel
- L2CAP: Fix L2CAP_ECRED_CONN_RSP response
* tag 'for-net-2025-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix L2CAP_ECRED_CONN_RSP response
Bluetooth: Always allow SCO packets for user channel
====================
Link: https://patch.msgid.link/20250221154941.2139043-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
|
|
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
|
