summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-06-30s390/qeth: consistently re-enable device featuresJulian Wiedmann
commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: don't clobber buffer on async TX completionJulian Wiedmann
If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]Vasily Gorbik
*ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: fix race when setting MAC addressJulian Wiedmann
When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30Revert "s390/qeth: use Read device to query hypervisor for MAC"Julian Wiedmann
This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek <mkubecek@suse.com> Tested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30alx: take rtnl before calling __alx_open from resumeSabrina Dubroca
The __alx_open function can be called from ndo_open, which is called under RTNL, or from alx_resume, which isn't. Since commit d768319cd427, we're calling the netif_set_real_num_{tx,rx}_queues functions, which need to be called under RTNL. This is similar to commit 0c2cc02e571a ("igb: Move the calls to set the Tx and Rx queues into igb_open"). Fixes: d768319cd427 ("alx: enable multiple tx queues") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30sfc: correctly initialise filter rwsem for farchBert Kenward
Fixes: fc7a6c287ff3 ("sfc: use a semaphore to lock farch filters too") Suggested-by: Joseph Korty <joe.korty@concurrent-rt.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net: phy: DP83TC811: Fix disabling interruptsDan Murphy
Fix a bug where INT_STAT1 was written twice and INT_STAT2 was ignored when disabling interrupts. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30dpaa_eth: DPAA SGT needs to be 256BMadalin Bucur
The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30fsl/fman: fix parser reporting bad checksum on short framesMadalin Bucur
The FMan hardware parser needs to be configured to remove the short frame padding from the checksum calculation, otherwise short UDP and TCP frames are likely to be marked as having a bad checksum. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30bnx2x: Fix receiving tx-timeout in error or recovery state.Sudarsana Reddy Kalluru
Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30cnic: tidy up a size calculationDan Carpenter
Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30atm: iphase: fix a 64 bit bugDan Carpenter
The code assumes that there is 4 bytes in a pointer and it doesn't allocate enough memory. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29nfp: stop limiting VFs to 0Jakub Kicinski
Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions". After 8d85a7a4f2c9, it means "we can't enable *any* VFs". That broke this scenario where nfp intends to remove any limit on the number of VFs that can be enabled: nfp_pci_probe nfp_pcie_sriov_read_nfd_limit nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err) pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit ... # userspace writes N to sysfs "sriov_numvfs": sriov_numvfs_store pci_sriov_get_totalvfs # now returns 0 return -ERANGE Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it now returns 0. Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the number of VFs that can be enabled. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29PCI/IOV: Reset total_VFs limit after detaching PF driverJakub Kicinski
The TotalVFs register in the SR-IOV capability is the hardware limit on the number of VFs. A PF driver can limit the number of VFs further with pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF limit that was imposed by the driver because that limit may not apply to other drivers. Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions", and the nfp driver used that to remove the VF limit when the driver unloads. 8d85a7a4f2c9 broke that because instead of removing the VF limit, pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that limit persists even if another driver is loaded. We could fix that by making the nfp driver reset the limit when it unloads, but it seems more robust to do it in the PCI core instead of relying on the driver. The regression scenario is: nfp_pci_probe (driver 1) ... nfp_pci_remove pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0 ... nfp_pci_probe (driver 2) nfp_rtsym_read_le("nfd_vf_cfg_max_vfs") # no VF limit from firmware Now driver 2 is broken because the VF limit is still 0 from driver 1. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog, rename functions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - The alternatives patching code uses flush_icache_range() which itself uses alternatives. Change the code to use an unpatched variant of cache maintenance - Remove unnecessary ISBs from set_{pte,pmd,pud} - perf: xgene_pmu: Fix IOB SLOW PMU parser error * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Remove unnecessary ISBs from set_{pte,pmd,pud} arm64: Avoid flush_icache_range() in alternatives patching code drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error
2018-06-29Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a revert because of bugzilla #200045 (and some documentation about it) - another regression fix in the i2c-gpio driver - a leak fix for the i2c core * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gpio: initialize SCL to HIGH again i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers i2c: algos: bit: mention our experience about initial states Revert "i2c: algo-bit: init the bus to a known state"
2018-06-29PCI: faraday: Add missing of_node_put()Nicholas Mc Guire
The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here in the error path and after the last usage. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-29PCI: xilinx-nwl: Add missing of_node_put()Nicholas Mc Guire
The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29PCI: xilinx: Add missing of_node_put()Nicholas Mc Guire
The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> [lorenzo.pieralisi@arm.com: reworked commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29PCI: endpoint: Use after free in pci_epf_unregister_driver()Dan Carpenter
We need to use list_for_each_entry_safe() because the pci_ep_cfs_remove_epf_group() function frees "group". Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-06-29PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yesGeert Uytterhoeven
PCIE_DW_PLAT_HOST does not have any platform dependency, so it should not default to yes. Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-06-29PCI: rcar: Clean up PHY init on failureMarek Vasut
If the Gen3 PHY fails to power up, the code does not undo the initialization caused by phy_init(). Add the missing failure handling to the rcar_pcie_phy_init_gen3() function. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Wolfram Sang <wsa@the-dreams.de>
2018-06-29PCI: rcar: Shut the PHY down in failpathMarek Vasut
If anything fails past phy_init_fn() and the system is a Gen3 with a PHY, the PHY will be left on and inited. This is caused by the phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3() function, which starts the PHY, yet has no counterpart in the failpath. Add that counterpart. Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support") Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Wolfram Sang <wsa@the-dreams.de>
2018-06-29sg: remove ->sg_magic memberJens Axboe
This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-29Merge tag 'pci-v4.18-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix crash caused by endpoint library initialization order change (Alan Douglas) - Fix shpchp NULL pointer dereference regression on non-ACPI platforms (Bjorn Helgaas) - Move PCI_DOMAINS selection to fix build regression (Lorenzo Pieralisi) * tag 'pci-v4.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: controller: Move PCI_DOMAINS selection to arch Kconfig PCI: Initialize endpoint library before controllers PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems
2018-06-29Merge tag 'pm-4.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up recently added features (the Kryo cpufreq driver and performance states coverage in the generic power domains framework), add missing documentation for a recently added sysfs knob in the intel_pstate driver and fix an error in its documentation. Specifics: - Fix the initialization time error handling in the recently added Kryo cpufreq driver (Dan Carpenter). - Fix up the recently added coverage of performance states in the generic power domains (genpd) framework (Viresh Kumar). - Add missing documentation of the new hwp_dynamic_boost sysfs knob in the intel_pstate driver (Rafael Wysocki). - Fix incorrect sysfs path in the intel_pstate driver documentation (Rafael Wysocki)" * tag 'pm-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: intel_pstate: Describe hwp_dynamic_boost sysfs knob Documentation: admin-guide: intel_pstate: Fix sysfs path PM / Domains: Rename opp_node to np PM / Domains: Fix return value of of_genpd_opp_to_performance_state() cpufreq: qcom-kryo: Fix error handling in probe()
2018-06-29Merge tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too major this round: - small set of mali-dp fixes - single meson fix - a bunch of amdgpu fixes (one makes non-4k page sizes not be a bad experience)" * tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: release spinlock before committing updates to stream drm/amdgpu:Support new VCN FW version naming convention drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.c drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()' drm/amdgpu: GPU vs CPU page size fixes in amdgpu_vm_bo_split_mapping drm/amdgpu: Count disabled CRTCs in commit tail earlier drm/mali-dp: Rectify the width and height passed to rotmem_required() drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format drm: mali-dp: Enable Global SE interrupts mask for DP500 drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector
2018-06-29Merge tag 'for-4.18/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix dm core to use more efficient bio_split() instead of bio_clone_bioset(). Also fixes splitting bio that has integrity payload. - Three fixes related to properly validating DAX capabilities of a stacked DM device that will advertise DAX support. - Update DM writecache target to use 2-factor allocator arguments. Kees says this is the last related change for 4.18. - Fix DM zoned target to use GFP_NOIO to avoid triggering reclaim during IO submission (caught by lockdep). - Fix DM thinp to gracefully recover from running out of data space while a previous async discard completes (whereby freeing space). - Fix DM thinp's metadata transaction commit to avoid needless work. * tag 'for-4.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: prevent DAX mounts if not supported dax: check for QUEUE_FLAG_DAX in bdev_dax_supported() pmem: only set QUEUE_FLAG_DAX for fsdax mode dm thin: handle running out of data space vs concurrent discard dm raid: don't use 'const' in function return dm zoned: avoid triggering reclaim from inside dmz_map() dm writecache: use 2-factor allocator arguments dm thin metadata: remove needless work from __commit_transaction dm: use bio_split() when splitting out the already processed bio
2018-06-29Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull single NVMe fix from Christoph. * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-rdma: fix possible double free of controller async event buffer
2018-06-29drbd: Fix drbd_request_prepare() discard handlingBart Van Assche
Fix the test that verifies whether bio_op(bio) represents a discard or write zeroes operation. Compile-tested only. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Fixes: 7435e9018f91 ("drbd: zero-out partial unaligned discards on local backend") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-29Merge ath-current from ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 4.18. Major changes: wcn36xx * convert testmode.c to plain ASCII ath10k * fix a firmware crash during bandwidth change
2018-06-29drm/exynos: ipp: use correct enum typeStefan Agner
The limit_id_fallback array uses enum drm_ipp_size_id to index its content. The content itself is of type enum drm_exynos_ipp_limit_type. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski
The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski
Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: fimc: Use real buffer width for configuring the hardwareMarek Szyprowski
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski
Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in GScaler driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Increase Exynos5433 buffer width alignment to 16 pixelsMarek Szyprowski
Investigation revealed that GScaler hardware requires the real buffer width (pitch) to be aligned to 16 pixels. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Use real buffer width for configuring the hardwareMarek Szyprowski
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Fix support for YUV420, YUV422 and YUV444 modesMarek Szyprowski
Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Reset hardware before starting the operationAndrzej Pietrasiewicz
Ensure that Scaler hardware is properly reset and interrupts are cleared before processing next image. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: rotator: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in Rotator driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: ipp: Rework checking for the correct buffer formatsMarek Szyprowski
Prepare a common function for size and scale checks and call it for source and destination buffers. Then also move there the state-less checks from exynos_drm_ipp_task_setup_buffer, so the format information is already available in limits processing. Finally perform the IPP_LIMIT_BUFFER check on the real width of the buffer (the width calculated from the provided buffer pitch). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29Merge branch 'pm-domains'Rafael J. Wysocki
Merge fixups for the recent extenstion of the generic power domains (genpd) framework covering performance states. * pm-domains: PM / Domains: Rename opp_node to np PM / Domains: Fix return value of of_genpd_opp_to_performance_state()
2018-06-29rtlwifi: rtl8821ae: fix firmware is not ready to runPing-Ke Shih
Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.0+ Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-29i2c: gpio: initialize SCL to HIGH againWolfram Sang
It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfersPeter Rosin
If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: algos: bit: mention our experience about initial statesWolfram Sang
So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-06-29Revert "i2c: algo-bit: init the bus to a known state"Wolfram Sang
This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru> Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
generated by cgit (git 2.34.1) at 2025-09-14 18:16:12 +0000