summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-10net: stmmac: remove redundant code from ethtool EEE opsRussell King (Oracle)
Setting edata->tx_lpi_enabled in stmmac_ethtool_op_get_eee() gets overwritten by phylib, so there's no point setting this. In stmmac_ethtool_op_set_eee(), now that stmmac is using the result of phylib's evaluation of EEE, there is no need to handle anything in the ethtool EEE ops other than calling through to the appropriate phylink function, which will pass on to phylib the users request. As stmmac_disable_eee_mode() is now no longer called from outside stmmac_main.c, make it static. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDr-0002KF-Cv@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: make EEE depend on phy->enable_tx_lpiRussell King (Oracle)
Make stmmac EEE depend on phylib's evaluation of user settings and PHY negotiation, as indicated by phy->enable_tx_lpi. This will ensure when phylib has evaluated that the user has disabled LPI, phy_init_eee() will not be called, and priv->eee_active will be false, causing LPI/EEE to be disabled. This is an interim measure - phy_init_eee() will be removed in a later patch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDm-0002K9-9w@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: use unsigned int for eee_timerRussell King (Oracle)
Since eee_timer is used to initialise priv->tx_lpi_timer, this also should be unsigned to avoid a negative number being interpreted as a very large positive number. Note that this makes the check for negative numbers passed in as a module parameter redundant, and passing a negative number will now produce a large delay rather than the default. Since the default is used without an argument, passing a negative number would be quite obscure. However, if users do, then this will need to be revisited. Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDh-0002K3-6y@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: use correct type for tx_lpi_timerRussell King (Oracle)
The ethtool interface uses u32 for tx_lpi_timer, and so does phylib. Use u32 to store this internally within stmmac rather than "int" which could misinterpret large values. Correct "value" in dwmac4_set_eee_lpi_entry_timer() to use u32 rather than int, which is derived from tx_lpi_timer. Even though this path won't be used with values larger than STMMAC_ET_MAX, this brings consistency of type usage to the stmmac code for this variable. We leave eee_timer unchanged for now, with the assumption that values up to INT_MAX will safely fit in a u32. Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDc-0002Jx-3b@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: move tx_lpi_timer tracking to phylibRussell King (Oracle)
When stmmac_ethtool_op_get_eee() is called, stmmac sets the tx_lpi_timer and tx_lpi_enabled members, and then calls into phylink and thus phylib. phylib overwrites these members. phylib will also cause a link down/link up transition when settings that impact the MAC have been changed. Convert stmmac to use the tx_lpi_timer setting in struct phy_device, updating priv->tx_lpi_timer each time when the link comes up, rather than trying to maintain this user setting itself. We initialise the phylib tx_lpi_timer setting by doing a get_ee-modify-set_eee sequence with the last known priv->tx_lpi_timer value. In order for this to work correctly, we also need this member to be initialised earlier. As stmmac_eee_init() is no longer called outside of stmmac_main.c, make it static. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDW-0002Jr-W3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: phy: add configuration of rx clock stop modeRussell King (Oracle)
Add a function to allow configuration of the PCS's clock stop enable bit, used to configure whether the xMII receive clock can be stopped during LPI mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDR-0002Jl-Ry@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()Arun Easi
Propagate scsi_add_host() error instead of returning -1. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091956.17749-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Test for memory allocation failure and return error codeKaran Tilak Kumar
Fix kernel test robot warning. Test for memory allocation failure, and free memory for queues allocated in a multiqueue and non-multiqueue scenario. Return appropriate error code. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202412312347.FE4ZgEoM-lkp@intel.com/ Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202412312347.FE4ZgEoM-lkp@intel.com/ Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091924.17729-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Return appropriate error code from failure of scsi drv initKaran Tilak Kumar
Return appropriate error code from fnic_probe caused by failure of fnic_scsi_drv_init. Fix bug report. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091842.17711-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Return appropriate error code for mem alloc failureKaran Tilak Kumar
Return appropriate error code from fnic_probe when memory create slab pool fails. Fix bug report. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091746.17671-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macroArun Easi
IS_FNIC_FCP_INITIATOR macro is not applicable at this time. Delete the macro. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091655.17643-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Fix use of uninitialized value in debug messageDheeraj Reddy Jonnalagadda
The oxid variable in fdls_process_abts_req() was only being initialized inside the if (tport) block, but was being used in a debug print statement after that block. If tport was NULL, oxid would remain uninitialized. Move the oxid initialization to happen at declaration using FNIC_STD_GET_OX_ID(fchdr). Fixes: f828af44b8dd ("scsi: fnic: Add support for unsolicited requests and responses") Closes: https://scan7.scan.coverity.com/#/project-view/52337/11354?selectedIssue=1602772 Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Link: https://lore.kernel.org/r/20250108050916.52721-1-dheeraj.linuxdev@gmail.com Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Delete incorrect debugfs error handlingDan Carpenter
Debugfs functions are not supposed to require error checking and, in fact, adding checks would normally lead to the driver refusing to load when CONFIG_DEBUGFS is disabled. What saves us here is that this code checks for NULL instead of error pointers so the error checking is all dead code. Delete it. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/a5c237cd-449b-4f9d-bcff-6285fb7c28d1@stanley.mountain Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove unnecessary else to fix warning in FDLS FIPKaran Tilak Kumar
Implement review comments from Martin: Remove unnecessary else from fip.c to fix a warning. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-3-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove extern definition from .c filesKaran Tilak Kumar
Implement review comments from Martin: Remove extern definition of fnic_fip_queue from .c files Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-2-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove unnecessary else and unnecessary break in FDLSKaran Tilak Kumar
Incorporate review comments from Martin: Remove unnecessary else and unnecessary break to fix warnings in the FDLS code. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: mpi3mr: Fix possible crash when setting up bsg failsGuixin Liu
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support") Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20250107022032.24006-1-kanie@linux.alibaba.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: ufs: bsg: Set bsg_queue to NULL after removalGuixin Liu
Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: ufs: bsg: Delete bsg_dev when setting up bsg failsGuixin Liu
We should remove the bsg device when bsg_setup_queue() fails to release the resources. Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-2-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: st: Don't set pos_unknown just after device recognitionKai Mäkisara
Commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") in v6.6 added new code to handle the Power On/Reset Unit Attention (POR UA) sense data. This was in addition to the existing method. When this Unit Attention is received, the driver blocks attempts to read, write and some other operations because the reset may have rewinded the tape. Because of the added code, also the initial POR UA resulted in blocking operations, including those that are used to set the driver options after the device is recognized. Also, reading and writing are refused, whereas they succeeded before this commit. Add code to not set pos_unknown to block operations if the POR UA is received from the first test_ready() call after the st device has been created. This restores the behavior before v6.6. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20241216113755.30415-1-Kai.Makisara@kolumbus.fi Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") CC: stable@vger.kernel.org Closes: https://lore.kernel.org/linux-scsi/2201CF73-4795-4D3B-9A79-6EE5215CF58D@kolumbus.fi/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: aic7xxx: Fix build 'aicasm' warningwangdicheng
When building with CONFIG_AIC7XXX_BUILD_FIRMWARE=y or CONFIG_AIC79XX_BUILD_FIRMWARE=y, the warning messages are as follows: aicasm_gram.tab.c:1722:16: warning: implicit declaration of function ‘yylex’ [-Wimplicit-function-declaration] aicasm_macro_gram.c:68:25: warning: implicit declaration of function ‘mmlex’ [-Wimplicit-function-declaration] aicasm_scan.l:417:6: warning: implicit declaration of function ‘mm_switch_to_buffer’ aicasm_scan.l:418:6: warning: implicit declaration of function ‘mmparse’ aicasm_scan.l:421:6: warning: implicit declaration of function ‘mm_delete_buffer’ The solution is to add the corresponding function declaration to the corresponding file. Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Signed-off-by: huanglei <huanglei@kylinos.cn> Link: https://lore.kernel.org/r/20241206071926.63832-1-wangdich9700@163.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10Merge tag 'thermal-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Fix an OF node leak in the code parsing thermal zone DT properties (Joe Hattori)" * tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: of: fix OF node leak in of_thermal_zone_find()
2025-01-10wifi: ath9k: cleanup ath9k_hw_get_nf_hist_mid()Dmitry Antipov
In 'ath9k_hw_get_nf_hist_mid()', prefer 'memcpy()' and 'sort()' over an ad-hoc things. Briefly tested as a separate module. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250109080703.106692-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10Merge tag 'acpi-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Add two more ACPI IRQ override quirks and update the code using them to avoid unnecessary overhead (Hans de Goede)" * tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: acpi_dev_irq_override(): Check DMI match last ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[] ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
2025-01-10scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"Avri Altman
This reverts commit 6e1d850acff9477ae4c18a73c19ef52841ac2010. Although added a while ago, to date no one make use of ext_iid, specifically incorporates it in the upiu header. Therefore, remove it as it is currently unused and not serving any purpose. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250103080204.63951-1-avri.altman@wdc.com Cc: Can Guo <quic_cang@quicinc.com> Cc: Asutosh Das <quic_asutoshd@quicinc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: storvsc: Ratelimit warning logs to prevent VM denial of serviceEaswar Hariharan
If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. Closes: https://github.com/microsoft/WSL/issues/9173 Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1f2b0@linux.microsoft.com Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_debug: Constify sdebug_driver_templateJohn Garry
It's better to have sdebug_driver_template as const, so update the probe path to set the shost members directly after allocation and make that change. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250107153325.1689432-1-john.g.garry@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-11Merge tag 'cgroup-dmem-drm-v2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next DMEM cgroup pull request This introduces a new cgroup controller to limit the device memory. Notable users would be DRM, dma-buf heaps, or v4l2. This pull request is based on the series developped by Maarten Lankhorst, Friedrich Vock, and I: https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/ Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
2025-01-10Merge tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly fixes, this has the usual amdgpu/xe/i915 bits. There is a bigger bunch of mediatek patches that I considered not including at this stage, but all the changes (except for one were obvious small fixes, and the rotation one is a few lines, and I suppose will help someone have their screen up the right way), I decided to include it since I expect it got slowed down by holidays etc, and it's not that mainstream a hw platform. i915: - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling xe: - Avoid a NULL ptr deref when wedging - Fix power gate sequence on DG1 mediatek: - Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported - Add support for 180-degree rotation in the display driver - Stop selecting foreign drivers - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" - Fix YCbCr422 color format issue for DP - Fix mode valid issue for dp - dp: Reference common DAI properties - dsi: Add registers to pdata to fix MT8186/MT8188 - Remove unneeded semicolon - Add return value check when reading DPCD - Initialize pointer in mtk_drm_of_ddp_path_build_one()" * tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits) drm/xe/dg1: Fix power gate sequence. drm/xe: Fix tlb invalidation when wedging Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" drm/amdgpu: Add a lock when accessing the buddy trim function drm/amd/pm: fix BUG: scheduling while atomic drm/amdkfd: wq_release signals dma_fence only when available drm/amd/display: Add check for granularity in dml ceil/floor helpers drm/amdkfd: fixed page fault when enable MES shader debugger drm/amd/display: fix divide error in DM plane scale calcs drm/amd/display: increase MAX_SURFACES to the value supported by hw drm/amd/display: fix page fault due to max surface definition mismatch drm/amd/display: Remove unnecessary amdgpu_irq_get/put drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one() drm/mediatek: Add return value check when reading DPCD drm/mediatek: Remove unneeded semicolon drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188 dt-bindings: display: mediatek: dp: Reference common DAI properties drm/mediatek: Fix mode valid issue for dp drm/mediatek: Fix YCbCr422 color format issue for DP Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" ...
2025-01-10Merge branch '6.13/scsi-fixes' into 6.14/scsi-stagingMartin K. Petersen
Pull in fixes branch to resolve merge conflict in ufs-qcom.c. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: transport: sas: spi: Fix kernel-doc for exported functionsRandy Dunlap
Fix kernel-doc for sas_port_alloc(), sas_port_alloc_num(), and spi_dv_device(). This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-6-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_scan: Add kernel-doc for exported functionRandy Dunlap
Add kernel-doc for scsi_add_device() since it is exported. This allows it to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-5-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_lib: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_failures_reset_retries() and scsi_alloc_request() since these are exported. This allows them to be part of the SCSI driver-api docbook. Fix kernel-doc comments for scsi_vpd_tpg_id() [add kernel-doc for one parameter and fix a typo]. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-4-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_ioctl: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_set_medium_removal(), scsi_cmd_allowed(), and scsi_ioctl_block_when_processing_errors() since these are exported. This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-3-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_error: Add kernel-doc for exported functionsRandy Dunlap
Convert scsi_report_bus_reset() and scsi_report_device_reset() to kernel-doc since they are exported. This allows them to be part of the driver-api/scsi.rst docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-2-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10wifi: ath12k: Support pdev Puncture StatsRajat Soni
Add support to request pdev puncture stats from firmware through HTT stats type 46. These stats give the count of number of subbands used in different wifi standards. Sample output: ------------- echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ofdm_su_last_used_pattern_mask = 0x00000001 tx_ofdm_su_num_subbands_used_cnt_01 = 217 tx_ofdm_su_num_subbands_used_cnt_02 = 0 tx_ofdm_su_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support AST Entry StatsRoopni Devanathan
Add support to request Address Search Table(AST) entries stats from firmware through HTT stats type 41. These stats give AST entries related information such as software peer id, MAC address, pdev id, vdev, id, next hop, etc. Sample output: ------------- echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_AST_ENTRY_TLV: ast_index = 10 mac_addr = 00:00:00:01:00:00 sw_peer_id = 0 pdev_id = 3 vdev_id = 255 next_hop = 0 mcast = 0 monitor_direct = 0 mesh_sta = 0 mec = 0 intra_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Buffer OFDMA StatsPradeep Kumar Chitrapu
Add support to request OFDMA stats of transmit buffers from firmware through HTT stats type 32. These stats give information about NDPA, NDP, BRP and steering mechanisms. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 32. Sample output: ------------- echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV: ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_NDP_STATS_TLV: ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_BRP_STATS_TLV: ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_STATS_TLV: ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV: rbo_steer_mpdus_tried = 0 rbo_steer_mpdus_failed = 0 sifs_steer_mpdus_tried = 0 sifs_steer_mpdus_failed = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Rate Buffer StatsPradeep Kumar Chitrapu
Add support to request transmit rate buffer stats from firmware through HTT stats type 31. These stats give information such as MCS, NSS and bandwidth of transmit and input buffer. Sample output: ------------- echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_PDEV_TX_RATE_TXBF_STATS: Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS: TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10Merge tag 'riscv-for-linus-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - a handful of selftest fixes - fix a memory leak in relocation processing during module loading - avoid sleeping in die() - fix kprobe instruction slot address calculations - fix DT node reference leak in SBI idle probing - avoid initializing out of bounds pages on sparse vmemmap systems with a gap at the start of their physical memory map - fix backtracing through exceptions - _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y - local labels in entry.S are now marked with ".L", which prevents them from trashing backtraces - a handful of fixes for SBI-based performance counters * tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: drivers/perf: riscv: Do not allow invalid raw event config drivers/perf: riscv: Return error for default case drivers/perf: riscv: Fix Platform firmware event data tools: selftests: riscv: Add test count for vstate_prctl tools: selftests: riscv: Add pass message for v_initval_nolibc riscv: use local label names instead of global ones in assembly riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition riscv: stacktrace: fix backtracing through exceptions riscv: mm: Fix the out of bound issue of vmemmap address cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu riscv: kprobes: Fix incorrect address calculation riscv: Fix sleeping in invalid context in die() riscv: module: remove relocation_head rel_entry member allocation riscv: selftests: Fix warnings pointer masking test
2025-01-10drm/amd/display: Initialize denominator defaults to 1Alex Hung
[WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)
2025-01-10drm/amd/display: Use HW lock mgr for PSR1Tom Chung
[Why] Without the dmub hw lock, it may cause the lock timeout issue while do modeset on PSR1 eDP panel. [How] Allow dmub hw lock for PSR1. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
2025-01-10drm/amd/display: Remove unnecessary eDP power downYiling Chen
[why] When first time of link training is fail, eDP would be powered down and would not be powered up for next retry link training. It causes that all of retry link linking would be fail. [how] We has extracted both power up and down sequence from enable/disable link output function before DCN32. We remov eDP power down in dcn32_disable_link_output(). Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f5860c88cdfe7300d08c1aef881bba0cac369e34)
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4caacd1671b7a013ad04cd8b6398f002540bdd4d) Cc: stable@vger.kernel.org
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit aa6713fa2046f4c09bf3013dd1420ae15603ca6f) Cc: stable@vger.kernel.org
2025-01-10Revert "drm/amd/display: Enable urgent latency adjustments for DCN35"Nicholas Susanto
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") [Why & How] Urgent latency increase caused 2.8K OLED monitor caused it to block this panel support P0. Reverting this change does not reintroduce the netflix corruption issue which it fixed. Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c7ccfc0d4241a834c25a9a9e1e78b388b4445d23) Cc: stable@vger.kernel.org
2025-01-10drm/amd/display: Reduce accessing remote DPCD overheadWayne Lin
[Why] Observed frame rate get dropped by tool like glxgear. Even though the output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower. It's due to code path in some cases will trigger dm_dp_mst_is_port_support_mode() to read out remote Link status to assess the available bandwidth for dsc maniplation. Overhead of keep reading remote DPCD is considerable. [How] Store the remote link BW in mst_local_bw and use end-to-end full_pbn as an indicator to decide whether update the remote link bw or not. Whenever we need the info to assess the BW, visit the stored one first. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4a9a918545455a5979c6232fcf61ed3d8f0db3ae) Cc: stable@vger.kernel.org
2025-01-10drm/amd/display: Validate mdoe under MST LCT=1 case as wellWayne Lin
[Why & How] Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode under dsc decoding at the last DP link config, we only validate the case when there is an UFP. However, if the MSTB LCT=1, there is no UFP. Under this case, use root_link_bw_in_kbps as the available bw to compare. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720 Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a04d9534a8a75b2806c5321c387be450c364b55e) Cc: stable@vger.kernel.org
2025-01-10drm/amdgpu/smu13: update powersave optimizationsAlex Deucher
Only apply when compute profile is selected. This is the only supported configuration. Selecting other profiles can lead to performane degradations. Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d477e39532d725b1cdb3c8005c689c74ffbf3b94) Cc: stable@vger.kernel.org # 6.12.x
2025-01-10soc/tegra: fuse: Update Tegra234 nvmem keepout listKartik Rajput
Various Nvidia userspace applications and tests access following fuse via Fuse nvmem interface: * odmid * odminfo * boot_security_info * public_key_hash * reserved_odm0 * reserved_odm1 * reserved_odm2 * reserved_odm3 * reserved_odm4 * reserved_odm5 * reserved_odm6 * reserved_odm7 * odm_lock * pk_h1 * pk_h2 * revoke_pk_h0 * revoke_pk_h1 * security_mode * system_fw_field_ratchet0 * system_fw_field_ratchet1 * system_fw_field_ratchet2 * system_fw_field_ratchet3 * optin_enable Update tegra234_fuse_keepouts list to allow reading these fuse from nvmem sysfs interface. Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Link: https://lore.kernel.org/r/20241127061053.16775-1-kkartik@nvidia.com Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-21 02:39:28 +0000