summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-14net/mlx5e: Add post_parse() op to tc action infrastructureRoi Dayan
The post_parse() op should be called after the parse op was called for all actions. It could be an action state is dependent on other actions. In the new op an action can fail the parse if the state is not valid anymore. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Move sample attr allocation to tc_action sample parse opRoi Dayan
There is no reason to wait with the kmalloc to after parsing all other actions. There could still be a failure later and before offloading the rule. So alloc the mem when parsing. The memory is being released on mlx5e_flow_put() which is called also on error flow. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: TC action parsing loopRoi Dayan
Introduce a common function to implement the generic parsing loop. The same function can be used for parsing NIC and FDB (Switchdev mode) flows. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add redirect ingress to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add sample and ptype to tc_action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add ct to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add mirred/redirect to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add mpls push/pop to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add vlan push/pop/mangle to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add pedit to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add csum to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add tunnel encap/decap to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add goto to tc action infraRoi Dayan
Add parsing support by implementing struct mlx5e_tc_act for this action. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14net/mlx5e: Add tc action infrastructureRoi Dayan
Add an infrastructure to help parsing tc actions in a generic way. Supporting an action parser means implementing struct mlx5e_tc_act for that action. The infrastructure will give the possibility to be generic when parsing tc actions, i.e. parse_tc_nic_actions() and parse_tc_fdb_actions(). To parse tc actions a user needs to allocate a parse_state instance and pass it when iterating over the tc actions parsers. If a parser doesn't exists then a user can treat it as unsupported. To add an action parser a user needs to implement two callbacks. The can_offload() callback to quickly check if an action can be offloaded. The parse_action() callback to do actual parsing and prepare for offload. Add implementation for drop, trap, mark and accept action parsers with this commit to act as examples and implement usage of the new infrastructure for those actions. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14bcache: fix NULL pointer reference in cached_dev_detach_finishLin Feng
Commit 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") tries to fix calc_cached_dev_sectors when bcache device detaches, but now we have: cached_dev_detach_finish ... bcache_device_detach(&dc->disk); ... closure_put(&d->c->caching); d->c = NULL; [*explicitly set dc->disk.c to NULL*] list_move(&dc->list, &uncached_devices); calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*] ... Upper codeflows shows how bug happens, this patch fix the problem by caching dc->disk.c beforehand, and cache_set won't be freed under us because c->caching closure at least holds a reference count and closure callback __cache_set_unregister only being called by bch_cache_set_stop which using closure_queue(&c->caching), that means c->caching closure callback for destroying cache_set won't be trigger by previous closure_put(&d->c->caching). So at this stage(while cached_dev_detach_finish is calling) it's safe to access cache_set dc->disk.c. Fixes: 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") Signed-off-by: Lin Feng <linf@wangsu.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211112053629.3437-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14net: dsa: hellcreek: Add missing PTP via UDP rulesKurt Kanzenbach
The switch supports PTP for UDP transport too. Therefore, add the missing static FDB entries to ensure correct forwarding of these packets. Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Allow PTP P2P measurements on blocked portsKurt Kanzenbach
Allow PTP peer delay measurements on blocked ports by STP. In case of topology changes the PTP stack can directly start with the correct delays. Fixes: ddd56dfe52c9 ("net: dsa: hellcreek: Add PTP clock support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Add STP forwarding ruleKurt Kanzenbach
Treat STP as management traffic. STP traffic is designated for the CPU port only. In addition, STP traffic has to pass blocked ports. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net: dsa: hellcreek: Fix insertion of static FDB entriesKurt Kanzenbach
The insertion of static FDB entries ignores the pass_blocked bit. That bit is evaluated with regards to STP. Add the missing functionality. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14RDMA/hns: Replace kfree() with kvfree()Jiacheng Shi
Variables allocated by kvmalloc_array() should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree() with kvfree() here. Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer") Link: https://lore.kernel.org/r/20211210094234.5829-1-billsjc@sjtu.edu.cn Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn> Acked-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()José Expósito
The wrong goto label was used for the error case and missed cleanup of the pkt allocation. Fixes: d39bf40e55e6 ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields") Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com Addresses-Coverity-ID: 1493352 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14RDMA/hns: Fix RNR retransmission issue for HIP08Yangyang Li
Due to the discrete nature of the HIP08 timer unit, a requester might finish the timeout period sooner, in elapsed real time, than its responder does, even when both sides share the identical RNR timeout length included in the RNR Nak packet and the responder indeed starts the timing prior to the requester. Furthermore, if a 'providential' resend packet arrived before the responder's timeout period expired, the responder is certainly entitled to drop the packet silently in the light of IB protocol. To address this problem, our team made good use of certain hardware facts: 1) The timing resolution regards the transmission arrangements is 1 microsecond, e.g. if cq_period field is set to 3, it would be interpreted as 3 microsecond by hardware 2) A QPC field shall inform the hardware how many timing unit (ticks) constitutes a full microsecond, which, by default, is 1000 3) It takes 14ns for the processor to handle a packet in the buffer, so the RNR timeout length of 10ns would ensure our processing mechanism is disabled during the entire timeout period and the packet won't be dropped silently To achieve (3), we permanently set the QPC field mentioned in (2) to zero which nominally indicates every time tick is equivalent to a microsecond in wall-clock time; now, a RNR timeout period at face value of 10 would only last 10 ticks, which is 10ns in wall-clock time. It's worth noting that we adapt the driver by magnifying certain configuration parameters(cq_period, eq_period and ack_timeout)by 1000 given the user assumes the configuring timing unit to be microseconds. Also, this particular improvisation is only deployed on HIP08 since other hardware has already solved this issue. Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver") Link: https://lore.kernel.org/r/20211209140655.49493-1-liangwenpeng@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YCMario Limonciello
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: don't override default ECO_BITs settingHawking Zhang
Leave this bit as hardware default setting Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma
should count on GC IP base address Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-12-14ice: Don't put stale timestamps in the skbKarol Kolacinski
The driver has to check if it does not accidentally put the timestamp in the SKB before previous timestamp gets overwritten. Timestamp values in the PHY are read only and do not get cleared except at hardware reset or when a new timestamp value is captured. The cached_tstamp field is used to detect the case where a new timestamp has not yet been captured, ensuring that we avoid sending stale timestamp data to the stack. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Use div64_u64 instead of div_u64 in adjfineKarol Kolacinski
Change the division in ice_ptp_adjfine from div_u64 to div64_u64. div_u64 is used when the divisor is 32 bit but in this case incval is 64 bit and it caused incorrect calculations and incval adjustments. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"David Mosberger-Tang
This follows normal Linux convention and is more useful since the new name will make it apparent which network device the work-queue is for (e.g., the name will be "wlan0-wq" for network device "wlan0"). hif_workqueue allocation has to move from cfg80211.c:wilc_cfg80211_init() to netdev.c:wilc_netdev_ifc_init() because the network device name is not known until after the netdev is registered. The move also makes sense because netdev.c is already responsible for destroying the work queue when it is no longer needed. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-5-davidm@egauge.net
2021-12-14wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-txDavid Mosberger-Tang
This follows normal Linux conventions and is also more useful because the netdevice name is part of the task name (e.g., "wlan0-tx" for network device "wlan0"). Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-4-davidm@egauge.net
2021-12-14wilc1000: Rename irq handler from "WILC_IRQ" to netdev nameDavid Mosberger-Tang
This change follows normal Linux convention and the new name is more useful since it'll be clear which irq handler statistics correspond to which net device. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-3-davidm@egauge.net
2021-12-14wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"David Mosberger-Tang
The name "wilc1000_spi" follows normal Linux conventions and also is analogous to the SDIO driver, which uses "wilc1000_sdio". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-2-davidm@egauge.net
2021-12-14wilc1000: Fix spurious "FW not responding" errorDavid Mosberger-Tang
When deinitializing the driver, one or more "FW not responding" error appears on the console. This appears to be due to wilc_wlan_stop() disabling host/WILC1000 communication, but then right afterwards, it tries to release the bus with chip-sleep enabled. The problem is enabling the chip-sleep cannot success once host/WILC1000 communication is disabled. Fix by only releasing the bus. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
2021-12-14wilc1000: Remove misleading USE_SPI_DMA macroDavid Mosberger-Tang
The USE_SPI_DMA macro name suggests that it could be set to 1 to control whether or not SPI DMA should be used. However, that's not what it does. If set to 1, it'll set the SPI messages' "is_dma_mapped" flag to true, even though the tx/rx buffers aren't actually DMA mapped by the driver. In other words, setting this flag to 1 will break the driver. Best to clean up this confusion by removing the macro altogether. There is no need to explicitly initialize "is_dma_mapped" because the message is cleared to zero anyhow, so "is_dma_mapped" is set to false by default. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211207002453.3193737-1-davidm@egauge.net
2021-12-14wilc1000: Fix missing newline in error messageDavid Mosberger-Tang
Add missing newline in pr_err() message. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-3-davidm@egauge.net
2021-12-14wilc1000: Fix copy-and-paste typo in wilc_set_mac_addressDavid Mosberger-Tang
The messages appears to have been copied from wilc_get_mac_address and says "get" when it should say "set". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
2021-12-14rtw89: coex: Update COEX to 5.5.8Ching-Te Ku
Update COEX version. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-8-pkshih@realtek.com
2021-12-14rtw89: coex: Cancel PS leaving while C2H comesChing-Te Ku
It's unnecessary to leave WL PS while C2H comes. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-7-pkshih@realtek.com
2021-12-14rtw89: coex: Update BT counters while receiving reportChing-Te Ku
Move _chk_btc_err and update_bt_cnt to _chk_btc_report(), so we can update counter/info to COEX at a proper moment, instead of relying on a user does cat the debug info periodically. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-6-pkshih@realtek.com
2021-12-14rtw89: coex: Define LPS state for BTC usingChing-Te Ku
To distinguish three types of LPS state. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-5-pkshih@realtek.com
2021-12-14rtw89: coex: Add MAC API to get BT polluted counterChing-Te Ku
Add function to get and parse BT polluted counter. When WLAN Tx was dropped by BT, the packet will be marked as BT polluted. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-4-pkshih@realtek.com
2021-12-14rtw89: coex: Not to send H2C when WL not ready and count H2CChing-Te Ku
Prevent to send H2C request to FW when BTC is not initialized or WL is under power saving. Add counter to count the H2C success or fail. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-3-pkshih@realtek.com
2021-12-14rtw89: coex: correct C2H header lengthChing-Te Ku
To resolve C2H handle length mismatch, or it will parse the c2h content out of array. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-2-pkshih@realtek.com
2021-12-14ice: Remove unused ICE_FLOW_SEG_HDRS_L2_MASKTony Nguyen
Remove the unused define ICE_FLOW_SEG_HDRS_L2_MASK. Reported-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove unnecessary castsDan Carpenter
The "bitmap" variable is already an unsigned long so there is no need for this cast. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Propagate error codesTony Nguyen
As all functions now return standard error codes, propagate the values being returned instead of converting them to generic values. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove excess error variablesTony Nguyen
ice_status previously had a variable to contain these values where other error codes had a variable as well. With ice_status now being an int, there is no need for two variables to hold error values. In cases where this occurs, remove one of the excess variables and use a single one. Some initialization of variables are no longer needed and have been removed. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 01:35:03 +0000