summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-04-18drm/xe: Return NULL in case of drmm_add_action_or_reset failureHimal Prasad Ghimiray
In case of drmm_add_action_or_reset failure return NULL and no need to print warning messages as they will be printed implictly. Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-5-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-18drm/xe: call free_gsc_pkt only once on action add failureHimal Prasad Ghimiray
The drmm_add_action_or_reset function automatically invokes the action (free_gsc_pkt) in the event of a failure; therefore, there's no necessity to call it within the return check. -v2 Fix commit message. (Lucas) Fixes: d8b1571312b7 ("drm/xe/huc: HuC authentication via GSC") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-18drm/xe: Remove sysfs only once on action add failureHimal Prasad Ghimiray
The drmm_add_action_or_reset function automatically invokes the action (sysfs removal) in the event of a failure; therefore, there's no necessity to call it within the return check. Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the caller to pass errors up the call chain. Should sysfs creation or drmm_add_action_or_reset fail, error propagation will prompt a driver load abort. -v2 Edit commit message (Nikula/Lucas) use err_force_wake label instead of new. (Lucas) Avoid unnecessary warn/error messages. (Lucas) Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-18drm/xe: Simplify function return using drmm_add_action_or_reset()Himal Prasad Ghimiray
Instead of assigning the value of drmm_add_action_or_reset() to err and returning err in case of failure and 0 in case of success, simply return the result of drmm_add_action_or_reset(). -v2: cleanup in xe_display too. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-2-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes: one in the core to improve the handling of warnings and unconditionally clear the command flags when ending a request and the other to add missing table values needed for bandwidth scaling in qualcomm ufs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
2024-04-18Merge tag 'net-6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "A little calmer than usual, probably just the timing of sub-tree PRs. Including fixes from netfilter. Current release - regressions: - inet: bring NLM_DONE out to a separate recv() again, fix user space which assumes multiple recv()s will happen and gets blocked forever - drv: mlx5: - restore mistakenly dropped parts in register devlink flow - use channel mdev reference instead of global mdev instance for coalescing - acquire RTNL lock before RQs/SQs activation/deactivation Previous releases - regressions: - net: change maximum number of UDP segments to 128, fix virtio compatibility with Windows peers - usb: ax88179_178a: avoid writing the mac address before first reading Previous releases - always broken: - sched: fix mirred deadlock on device recursion - netfilter: - br_netfilter: skip conntrack input hook for promisc packets - fixes removal of duplicate elements in the pipapo set backend - various fixes for abort paths and error handling - af_unix: don't peek OOB data without MSG_OOB - drv: flower: fix fragment flags handling in multiple drivers - drv: ravb: fix jumbo frames and packet stats accounting Misc: - kselftest_harness: fix Clang warning about zero-length format - tun: limit printing rate when illegal packet received by tun dev" * tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them net: usb: ax88179_178a: avoid writing the mac address before first reading net: ravb: Fix RX byte accounting for jumbo packets net: ravb: Fix GbEth jumbo packet RX checksum handling net: ravb: Allow RX loop to move past DMA mapping errors net: ravb: Count packets instead of descriptors in R-Car RX path net: ethernet: mtk_eth_soc: fix WED + wifi reset net:usb:qmi_wwan: support Rolling modules selftests: kselftest_harness: fix Clang warning about zero-length format net/sched: Fix mirred deadlock on device recursion netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk s390/ism: Properly fix receive message buffer allocation net: dsa: mt7530: fix port mirroring for MT7988 SoC switch net: dsa: mt7530: fix mirroring frames received on local port tun: limit printing rate when illegal packet received by tun dev ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ...
2024-04-18drm/xe/xe2lpg: Extend Wa_14020338487Gustavo Sousa
Wa_14020338487 also applies to Xe2_LPG. Replicate the existing entry to one specific for Xe2_LPG. Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417212501.312346-1-gustavo.sousa@intel.com
2024-04-18Merge tag 'gpio-fixes-for-v6.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - use -ENOTSUPP consistently in Intel GPIO drivers - don't include dt-bindings headers in gpio-swnode code - add missing of device table to gpio-lpc32xx and fix autoloading * tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: swnode: Remove wrong header inclusion gpio: lpc32xx: fix module autoloading gpio: crystalcove: Use -ENOTSUPP consistently gpio: wcove: Use -ENOTSUPP consistently
2024-04-18net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using themSiddharth Vadapalli
The TX and RX DMA Channels used by the driver to exchange data with CPSW are not guaranteed to be in a clean state during driver initialization. The Bootloader could have used the same DMA Channels without cleaning them up in the event of failure. Thus, reset and disable the DMA Channels to ensure that they are in a clean state before using them. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Reported-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: usb: ax88179_178a: avoid writing the mac address before first readingJose Ignacio Tornos Martinez
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset operation, in which the default mac address from the device is read, is not executed from bind operation and the random address, that is pregenerated just in case, is direclty written the first time in the device, so the default one from the device is not even read. This writing is not dangerous because is volatile and the default mac address is not missed. In order to avoid this and keep the simplification to have only one reset and reduce the delays, restore the reset from bind operation and remove the reset that is commanded from open operation. The behavior is the same but everything is ready for usbnet_probe. Tested with ASIX AX88179 USB Gigabit Ethernet devices. Restore the old behavior for the rest of possible devices because I don't have the hardware to test. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18Merge tag 'random-6.9-rc5-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - The input subsystem contributes entropy in some places where a spinlock is held, but the entropy accounting code only handled callers being in an interrupt or non-atomic process context, but not atomic process context. We fix this by removing an optimization and just calling queue_work() unconditionally. - Greg accidently sent up a patch not intended for his tree and that had been nack'd, so that's now reverted. * tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: Revert "vmgenid: emit uevent when VMGENID updates" random: handle creditable entropy from atomic process context
2024-04-18USB: serial: option: add Telit FN920C04 rmnet compositionsDaniele Palmas
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-18usb: dwc3: ep0: Don't reset resource alloc flagThinh Nguyen
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/00122b7cc5be06abef461776e7cc9f5ebc8bc1cb.1713229786.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18Revert "usb: cdc-wdm: close race between read and workqueue"Greg Kroah-Hartman
This reverts commit 339f83612f3a569b194680768b22bf113c26a29d. It has been found to cause problems in a number of Chromebook devices, so revert the change until it can be brought back in a safe way. Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org Reported-by:: Aleksander Morgado <aleksandermj@chromium.org> Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue") Cc: stable <stable@kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18Merge tag 'platform-drivers-x86-v6.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - amd/pmf: Add SPS notifications quirk (+ quirk support) - amd/pmf: Lower Smart PC check message severity - x86/ISST: New HW support - x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message - amd/pmc: New BIOS version still needs Spurious IRQ1 quirk * tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes platform/x86/intel-uncore-freq: Increase minor number support platform/x86: ISST: Add Granite Rapids-D to HPM CPU list platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14 platform/x86/amd: pmf: Add infrastructure for quirking supported funcs platform/x86/amd: pmf: Decrease error message to debug
2024-04-18Revert "vmgenid: emit uevent when VMGENID updates"Jason A. Donenfeld
This reverts commit ad6bcdad2b6724e113f191a12f859a9e8456b26d. I had nak'd it, and Greg said on the thread that it links that he wasn't going to take it either, especially since it's not his code or his tree, but then, seemingly accidentally, it got pushed up some months later, in what looks like a mistake, with no further discussion in the linked thread. So revert it, since it's clearly not intended. Fixes: ad6bcdad2b67 ("vmgenid: emit uevent when VMGENID updates") Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.es Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2024-04-18drm/xe: Add outer runtime_pm protection to xe_live_ktest@xe_dma_bufRodrigo Vivi
Any kunit doing any memory access should get their own runtime_pm outer references since they don't use the standard driver API entries. In special this dma_buf from the same driver. Found by pre-merge CI on adding WARN calls for unprotected inner callers: <6> [318.639739] # xe_dma_buf_kunit: running xe_test_dmabuf_import_same_driver <4> [318.639957] ------------[ cut here ]------------ <4> [318.639967] xe 0000:4d:00.0: Missing outer runtime PM protection <4> [318.640049] WARNING: CPU: 117 PID: 3832 at drivers/gpu/drm/xe/xe_pm.c:533 xe_pm_runtime_get_noresume+0x48/0x60 [xe] Cc: Matthew Auld <matthew.auld@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-10-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Ensure all the inner access are using the _noresume variantRodrigo Vivi
At this point mem_access references should be only used as inner points of the execution and a get with synchronous resume previously called at an outer point. So, before killing mem_acces in favor of direct accsess, let's ensure that we first convert them towards the new _noresume variant that will WARN us if no inner caller happened. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-9-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Convert mem_access_if_ongoing to direct xe_pm_runtime_get_if_activeRodrigo Vivi
Now that assert_mem_access is relying directly on the pm_runtime state instead of the counters, there's no reason why we cannot use the pm_runtime functions directly. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-8-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Removing extra mem_access protection from runtime pmRodrigo Vivi
This is not needed any longer, now that we have all the protection in place with the runtime pm itself. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-7-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Convert xe_gem_fault to use direct xe_pm_runtime callsRodrigo Vivi
The gem page fault is one of the outer bound protections where we want to ensure that the hardware is in D0 before proceeding with memory access. Let's convert it towards the xe_pm_runtime functions directly so we can then convert the mem_access to be inner protection only and then Kill it for good. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-6-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Remove useless mem_access during probeRodrigo Vivi
xe_pm_init is the very last thing during the xe_pci_probe(), hence these protections are useless from the point of view of ensuring that the device is awake. Let's remove it so we continue towards the goal of killing xe_device_mem_access. v2: Adding more cases v3: Provide a separate fix for xe_tile_init_noalloc return (Matt) Adding a new case where display HDCP init calls which are also called at display probe time. Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Move lockdep protection from mem_access to xe_pm_runtimeRodrigo Vivi
The mem_access itself is not holding any lock, but attempting to train lockdep with possible scarring locks happening during runtime pm. We are going soon to kill the mem_access get and put helpers in favor of direct xe_pm_runtime calls, so let's just move this lock around to where it now belongs. v2: s/lockdep_training/lockdep_prime (Matt Auld) Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-4-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/i915/display: convert inner wakeref get towards get_if_in_useRodrigo Vivi
This patch brings no functional change. Since at this point of the code we are already asserting a wakeref was held, it means that we are with runtime_pm 'in_use' and in practical terms we are only bumping the pm_runtime usage counter and moving on. However, xe driver has a lockdep annotation that warned us that if a sync resume was actually called at this point, we could have a deadlock because we are inside the power_domains->lock locked area and the resume would call the irq_reset, which would also try to get the power_domains->lock. For this reason, let's convert this call to a safer option and calm lockdep on. v2: use _noresume variant instead of get_in_use (Ville, Imre) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Imre Deak <imre.deak@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Introduce intel_runtime_pm_get_noresume at compat-i915-headers for ↵Rodrigo Vivi
display The i915-display will start using the intel_runtime_pm_noresume. So we need to add the compat header before it. Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-2-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/xe: Introduce xe_pm_runtime_get_noresume for inner callersRodrigo Vivi
Let's ensure that we have an option for inner callers that will raise WARN if device is not active and not protected by outer callers. Make this also a void function forcing every caller to unconditionally put the reference back afterwards. This will be very important for cases where we want to hold the reference before scheduling a work in a queue. Then the work job will be responsible for putting it back. While at this, already convert a case from mem_access_get_ongoing where it is not checking for the reference and put it back, what would cause the underflow. v2: Fix identation. v3: Convert equivalent missing put from mem_access towards pm_runtime. Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-18drm/vkms: Use drm_crtc_vblank_crtc()Ville Syrjälä
Replace the open coded drm_crtc_vblank_crtc() with the real thing. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: "Maíra Canal" <mairacanal@riseup.net> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-5-ville.syrjala@linux.intel.com Reviewed-by: Maíra Canal <mcanal@igalia.com>
2024-04-18drm/nouveau: Use drm_crtc_vblank_crtc()Ville Syrjälä
Replace the open coded drm_crtc_vblank_crtc() with the real thing. Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-4-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2024-04-18drm/vblank: Introduce drm_crtc_vblank_crtc()Ville Syrjälä
Make life easier by providing a function that hands out the correct drm_vblank_crtc for a given a drm_crtc. Also abstract the lower level internals of the vblank code in a similar fashion. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-1-ville.syrjala@linux.intel.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-18net: ravb: Fix RX byte accounting for jumbo packetsPaul Barker
The RX byte accounting for jumbo packets was changed to fix a potential use-after-free bug. However, that fix used the wrong variable and so only accounted for the number of bytes in the final descriptor, not the number of bytes in the whole packet. To fix this, we can simply update our stats with the correct number of bytes before calling napi_gro_receive(). Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future confusion. The variable name pkt_len is correct in ravb_rx_rcar() as that function does not handle packets spanning multiple descriptors. Fixes: 5a5a3e564de6 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-18net: ravb: Fix GbEth jumbo packet RX checksum handlingPaul Barker
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following backtrace: WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38 Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT) pc : skb_trim+0x30/0x38 lr : ravb_rx_csum_gbeth+0x40/0x90 Call trace: skb_trim+0x30/0x38 ravb_rx_gbeth+0x56c/0x5cc ravb_poll+0xa0/0x204 __napi_poll+0x38/0x17c This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the wrong skb for a packet which spans multiple descriptors. To fix this, use the correct skb. Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-18net: ravb: Allow RX loop to move past DMA mapping errorsPaul Barker
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop iteration if a zero-length descriptor is seen (indicating a DMA mapping error). However, the current RX descriptor index `priv->cur_rx[q]` was incremented at the end of the loop and so would not be incremented when we skip to the next loop iteration. This would cause the loop to keep seeing the same zero-length descriptor instead of moving on to the next descriptor. As the loop counter `i` still increments, the loop would eventually terminate so there is no risk of being stuck here forever - but we should still fix this to avoid wasting cycles. To fix this, the RX descriptor index is incremented at the top of the loop, in the for statement itself. The assignments of `entry` and `desc` are brought into the loop to avoid the need for duplication. Fixes: d8b48911fd24 ("ravb: fix ring memory allocation") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-18net: ravb: Count packets instead of descriptors in R-Car RX pathPaul Barker
The units of "work done" in the RX path should be packets instead of descriptors. Descriptors which are used by the hardware to record error conditions or are empty in the case of a DMA mapping error should not count towards our RX work budget. Also make the limit variable unsigned as it can never be negative. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-18USB: serial: option: add Rolling RW101-GL and RW135-GL supportVanillan Wang
Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-18USB: serial: option: add Lonsung U8300/U9300 productCoia Prant
Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Reviewed-by: Lars Melin <larsm17@gmail.com> [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-17net: ethernet: mtk_eth_soc: fix WED + wifi resetFelix Fietkau
The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17net:usb:qmi_wwan: support Rolling modulesVanillan Wang
Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-16 (ice) This series contains updates to ice driver only. Michal fixes a couple of issues with TC filter parsing; always add match for src_vsi and remove flag check that could prevent addition of valid filters. Marcin adds additional checks for unsupported flower filters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ==================== Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17drm/xe/lnl: Apply GuC Wa_13011645652Vinay Belgaumkar
Enable WA for a bug that could cause the C6 state machine to hang during RC6 exit. v2: Add comment clarifying the WA (John H) v3: Add more details to the comment (John H) Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417054802.1766359-1-vinay.belgaumkar@intel.com
2024-04-17Merge tag 'pwm/for-6.9-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fixes from Uwe Kleine-König: "The first patch fixes a regression in the suspend/resume path for the dwc pwm driver that was introduced in v6.9-rc1 when support for 16 channel devices was added. The second patch fixes a bunch of device tree binding check warnings" * tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property pwm: dwc: allow suspend/resume for 16 channels
2024-04-17drm/panel: simple: Add Innolux G121XCE-L01 LVDS display supportMarek Vasut
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 4:3, 1024(H) x 768(V) screen and either 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit. All input signals are LVDS interface compatible. Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are effectively identical panels, use the former as RGB 6-bits variant and add the later as RGB 8-bits variant. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-4-marex@denx.de
2024-04-17drm/panel: simple: Convert Innolux G121X1-L03 to display_timingMarek Vasut
Use display_timing instead of drm_display_mode to define a range of possible display timings supported by this panel. This makes the panel support more flexible and improves compatibility. No functional change is expected. The settings are picked from documentation [1] section 6.1 INPUT SIGNAL TIMING SPECIFICATIONS. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-3-marex@denx.de
2024-04-17drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connectorMarek Vasut
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
2024-04-17drm/radeon: silence UBSAN warning (v3)Alex Deucher
Convert a variable sized array from [1] to []. v2: fix up a few more. v3: integrate comments from Kees. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2) Acked-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: keescook@chromium.org
2024-04-17drm/radeon: make -fstrict-flex-arrays=3 happyAlex Deucher
The driver parses a union where the layout up through the first array is the same, however, the array has different sizes depending on the elements in the union. Be explicit to fix the UBSAN checker. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kees Cook <keescook@chromium.org>
2024-04-17drm/amdgpu: fix visible VRAM handling during faultsChristian König
When we removed the hacky start code check we actually didn't took into account that *all* VRAM pages needs to be CPU accessible. Clean up the code and unify the handling into a single helper which checks if the whole resource is CPU accessible. The only place where a partial check would make sense is during eviction, but that is neglitible. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-04-17drm/amdgpu: validate the parameters of bo mapping operations more clearlyxinhui pan
Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov <hexed@google.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-17Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"Alex Deucher
This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652. This change breaks DSC on 4k monitors at 144Hz over USB-C. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Charlene Liu <charlene.liu@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org
2024-04-17drm/amdkfd: Fix memory leak in create_process failureFelix Kuehling
Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable") CC: Xiaogang Chen <xiaogang.chen@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-17drm/amdgpu: remove invalid resource->start check v2Christian König
The majority of those where removed in the commit aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") But this one was missed because it's working on the resource and not the BO. Since we also no longer use a fake start address for visible BOs this will now trigger invalid mapping errors. v2: also remove the unused variable Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: stable@vger.kernel.org Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-17 02:32:19 +0000