summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-05cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limitsDhananjay Ugwekar
Scope based guard/cleanup macros should not be used together with goto labels. Hence, remove the goto label. Fixes: 6c093d5a5b73 ("cpufreq/amd-pstate: convert mutex use to guard()") Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-05drm/i915/backlight: convert to use struct intel_displayJani Nikula
Going forward, struct intel_display will be the main display data structure. Convert as much as possible of backlight code to use it. There are some stragglers mainly around PCH checks. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204132423.2910978-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/cx0: convert to struct intel_display based platform checksJani Nikula
Switch the IS_<PLATFORM>() checks to display->platform.<platform>, and drop a number of struct drm_i915_private pointers in the process. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204134228.2934744-3-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/cdclk: switch to new platform checksJani Nikula
Switch the IS_<PLATFORM>() checks to display->platform.<platform>, and drop a number of struct drm_i915_private pointers in the process. While at it, replace /* NOOP */; with ; /* NOOP */ to avoid a checkpatch warning on misleading indentation. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204134228.2934744-2-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/display: convert intel_ddi_buf_trans.c to struct intel_displayJani Nikula
Going forward, struct intel_display is the main device data structure for display. Switch to it. For MISSING_CASE(), log the PCI ID instead of the platform to get rid of the i915_drv.h dependency. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204134228.2934744-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/lspcon: rename interfaces to intel_lspcon_* to unifyJani Nikula
Rename all the main functions to have intel_lspcon_ prefix. Keep the infoframes hooks named lspcon_ for now, and grouped together, as there'd be a clash with intel_lspcon_infoframes_enabled(). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/15e8c4133aee89181e6776a44e58f2573cfe23f2.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/lspcon: remove dp_to_lspcon(), hide enc_to_intel_lspcon()Jani Nikula
There are no users left for dp_to_lspcon(), remove it. The only two users of enc_to_intel_lspcon() are in intel_lspcon.c, so hide it there. v2: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ea14ba07b88ba5ed65d832c89a3415b7a91edea9.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/lspcon: change signature of lspcon_wait_pcon_mode()Jani Nikula
Switch from struct intel_lspcon to struct intel_digital_port to unify. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84a00791d3d7ee4e34c1224ef7471918546635aa.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/lspcon: change signature of lspcon_detect_hdr_capability()Jani Nikula
Switch from struct intel_lspcon to struct intel_digital_port to unify, and return the value so the caller doesn't have to look at lspcon->hdr_detected directly. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6f249f5c537a16a6762faddffd6a95cbf61cf077.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/lspcon: add intel_lspcon_active() and use itJani Nikula
Hide the direct lspcon->active use behind intel_lspcon_active(). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3eabe0cb07a84c63119ea893e149de410b4356b0.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/hdmi: move declarations for hsw_read/write_infoframe() to the right ↵Jani Nikula
place The functions are located in intel_hdmi.c, put the declarations in intel_hdmi.h. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e8cd28a3c46f06b9654df8b7990e1e6a1d9e18c1.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05Merge drm/drm-next into drm-intel-nextJani Nikula
Sync with v6.14-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/dmc_wl: Do not check for DMC payloadGustavo Sousa
Enabling and disabling of DMC wakelock is already coupled with enabling and disabling of dynamic DC states, which already depend on the DMC being properly loaded. As such, we do not need to check if we already have a DMC payload parsed in __intel_dmc_wl_supported(). Furthermore, the presence of such a check causes inconsistencies in the refcount if the following sequence of events happen: 1. A call to one of the register accessors from intel_de.h is done before the DMC payload is parsed. That causes intel_dmc_wl_get() to be called. Suppose the register offset qualifies as needing the wakelock. In normal circumstances, the refcount would be incremented, but, because __intel_dmc_wl_supported() returns false, the refcount is untouched. 2. In a separate worker thread, the DMC firmware is parsed. Parsing of the DMC payload is finished before the corresponding intel_dmc_wl_put() from (1) is called. 3. When in the context of (1), intel_dmc_wl_put() gets called, now we have __intel_dmc_wl_supported() returning true and we hit the warning, because the code doesn't expect a zero refcount. Let's remove that check, since it is unnecessary and causes the inconsistency illustrated above. Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250124191250.56833-1-gustavo.sousa@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
2025-02-05drm/xe/hwmon: expose package and vram temperatureRaag Jadav
Add hwmon support for temp2_input and temp3_input attributes, which will expose package and vram temperature in millidegree Celsius. With this in place we can monitor temperature using lm-sensors tool. v2: Reuse existing channels (Badal, Karthik) Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131054502.1528555-1-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-05drm/i915/dp: Add support for DP UHBR SST DSCJani Nikula
Drop the UHBR limitation from DP SST DSC, and handle SST DSC bandwidth computation for UHBR using intel_dp_mtp_tu_compute_config(). Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203160834.2708027-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/dp: Fix potential infinite loop in 128b/132b SSTJani Nikula
Passing 0 as the step only works when there are other reasons to break out of the BPP loop in intel_dp_mtp_tu_compute_config(). Otherwise, an infinite loop might occur. Fix it by explicitly checking for 0 step. Fixes: ef0a0757bbea ("drm/i915/dp: compute config for 128b/132b SST w/o DSC") Reported-by: Imre Deak <imre.deak@intel.com> Closes: https://lore.kernel.org/r/Z6I0knh2Kt5T0JrT@ideak-desk.fi.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204154925.3001781-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05drm/i915/mst: fix INT_MAX to .4 fixed point conversion mistakeJani Nikula
intel_dp_mtp_tu_compute_config() conversion to use .4 fixed point didn't take into account that intel_dp_mst_max_dpt_bpp() may return INT_MAX when the transport limitation is not relevant. Converting INT_MAX to .4 fixed point results in -1.0, which then gets used as if it were a real max BPP value: i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Limiting bpp to max DPT bpp (24.0000 -> -1.0000) i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Looking for slots in range min bpp 18.0000 max bpp -1.0000 Just return 0 for "no max DPT BPP", and handle it explicitly. Fixes: 67782bf6e8a6 ("drm/i915/mst: Convert intel_dp_mtp_tu_compute_config() to .4 format") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13624 Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204153717.2996923-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05gpio: GPIO_GRGPIO should depend on OFGeert Uytterhoeven
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on gpiolib-of, it supports only DT-based configuration, and is used only on DT systems. Hence add a dependency on OF, to prevent asking the user about this driver when configuring a kernel without DT support. Fixes: bc40668def384256 ("gpio: grgpio: drop Kconfig dependency on OF_GPIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-05gpio: sim: lock hog configfs items if presentBartosz Golaszewski
Depending on the user config, the leaf entry may be the hog directory, not line. Check it and lock the correct item. Fixes: 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on") Tested-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-05Revert "i2c: Replace list-based mechanism for handling auto-detected clients"Wolfram Sang
This reverts commit 56a50667cbcfaf95eea9128d5676af94e54b51a8. Mux handling is not sufficiently implemented. It needs more time. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-05Revert "i2c: Replace list-based mechanism for handling userspace-created ↵Wolfram Sang
clients" This reverts commit 3cfe39b3a845593a485ab1c716615979004ef9f6. Mux handling is not sufficiently implemented. It needs more time. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-05drm/ci: update expectation filesVignesh Raman
Update expectation files for the mesa uprev. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205081652.1928927-4-vignesh.raman@collabora.com
2025-02-05drm/ci: update gitlab rulesVignesh Raman
Update gitlab rules to include scheduled pipelines. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205081652.1928927-3-vignesh.raman@collabora.com
2025-02-05drm/ci: uprev mesaVignesh Raman
Uprev mesa to adapt to the latest changes in mesa ci which includes new container jobs and stages. Also update lava-submit script to adapt to the recent changes in mesa to use LAVA rootfs overlays. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205081652.1928927-2-vignesh.raman@collabora.com
2025-02-05regmap-irq: Add missing kfree()Jiasheng Jiang
Add kfree() for "d->main_status_buf" to the error-handling path to prevent a memory leak. Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-05drm/i915/dp: Guarantee a minimum HBlank timeArun R Murthy
Mandate a minimum Hblank symbol cycle count between BlankingStart and BlankingEnd in 8b/10b MST and 128b/132b mode. v2: Affine calculation/updation of min HBlank to dp_mst (Jani) v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani) v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx (Jani) Limit hblank to 511 and accommodate BS/BE in calculated value (Srikanth) v5: Some spelling corrections (Suraj) v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and DP1.4 (Suraj) v7: crtc_state holds the logical values and the register value computation is moved to mst_enable() (Jani) v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani) Bspec: 74379 Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
2025-02-04drm/xe/pxp: Fail the load if PXP fails to initializeDaniele Ceraolo Spurio
The PXP implementation mimics the i915 approach of allowing the load to continue even if PXP init has failed. On Xe however we're taking an harder stance on boot error and only allowing the load to complete if everything is working, so update the code to fail if anything goes wrong during PXP init. While at it, update the return code in case of PXP not supported to be 0 instead of EOPNOTSUPP, to follow the standard of functions called by xe_device_probe where every non-zero value means failure. Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203234857.1419637-1-daniele.ceraolospurio@intel.com
2025-02-04Revert "drm/amd/display: Use HW lock mgr for PSR1"Tom Chung
This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-04drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml filesNathan Chancellor
Currently, there are several files in drm/amd/display that aim to have a higher -Wframe-larger-than value to avoid instances of that warning with a lower value from the user's configuration. However, with the way that it is currently implemented, it does not respect the user's request via CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain when new instances of the warning appear and break the build due to CONFIG_WERROR. Adjust the logic to switch from a hard coded -Wframe-larger-than value to only using the value as a minimum clamp and deferring to the requested value from CONFIG_FRAME_WARN if it is higher. Suggested-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-04net: atlantic: fix warning during hot unplugJacob Moroni
Firmware deinitialization performs MMIO accesses which are not necessary if the device has already been removed. In some cases, these accesses happen via readx_poll_timeout_atomic which ends up timing out, resulting in a warning at hw_atl2_utils_fw.c:112: [ 104.595913] Call Trace: [ 104.595915] <TASK> [ 104.595918] ? show_regs+0x6c/0x80 [ 104.595923] ? __warn+0x8d/0x150 [ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595934] ? report_bug+0x182/0x1b0 [ 104.595938] ? handle_bug+0x6e/0xb0 [ 104.595940] ? exc_invalid_op+0x18/0x80 [ 104.595942] ? asm_exc_invalid_op+0x1b/0x20 [ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic] [ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic] [ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic] [ 104.595975] __dev_close_many+0xad/0x160 [ 104.595978] dev_close_many+0x99/0x170 [ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20 [ 104.595981] ? __call_rcu_common+0xcd/0x700 [ 104.595984] unregister_netdevice_queue+0xc6/0x110 [ 104.595986] unregister_netdev+0x1c/0x30 [ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic] Fix this by skipping firmware deinitialization altogether if the PCI device is no longer present. Tested with an AQC113 attached via Thunderbolt by performing repeated unplug cycles while traffic was running via iperf. Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Jacob Moroni <mail@jakemoroni.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-04gpio: pca953x: Improve interrupt supportMark Tomlinson
The GPIO drivers with latch interrupt support (typically types starting with PCAL) have interrupt status registers to determine which particular inputs have caused an interrupt. Unfortunately there is no atomic operation to read these registers and clear the interrupt. Clearing the interrupt is done by reading the input registers. The code was reading the interrupt status registers, and then reading the input registers. If an input changed between these two events it was lost. The solution in this patch is to revert to the non-latch version of code, i.e. remembering the previous input status, and looking for the changes. This system results in no more I2C transfers, so is no slower. The latch property of the device still means interrupts will still be noticed if the input changes back to its initial state. Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-04spi: pxa2xx: Fix regression when toggling chip select on LPSS devicesMark Lord
The commit 78b435c9044a ("spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper") broke speaker output on my ASUS UX5304MA laptop. The problem is in inverted value that got written in the private register. Simple bug, simple fix. Fixes: 78b435c9044a ("spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper") Signed-off-by: Mark Lord <mlord@pobox.com> Tested-by: Mark Lord <mlord@pobox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250204174506.149978-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-04accel/amdxdna: Add MODULE_FIRMWARE() declarationsMario Limonciello
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE() declaration to determine which firmware to include in the initramfs when a driver is included in the initramfs. As amdxdna doesn't declare any firmware this causes the driver to fail to load with -ENOENT when in the initramfs. Add the missing declaration for possible firmware. Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com> Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com> Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine") Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
2025-02-04Merge tag 'platform-drivers-x86-v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - ideapad-laptop: Pass a correct pointer to the driver data - intel/ifs: Provide a link to the IFS test images - intel/pmc: Use large enough type when decoding LTR value * tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel/ifs: Update documentation with image download path platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show() platform/x86: ideapad-laptop: pass a correct pointer to the driver data
2025-02-04drm/i915/dp: Iterate DSC BPP from high to low on all platformsJani Nikula
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp") tries to find the best compressed bpp for the link. However, it iterates from max to min bpp on display 13+, and from min to max on other platforms. This presumably leads to minimum compressed bpp always being chosen on display 11-12. Iterate from high to low on all platforms to actually use the best possible compressed bpp. Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v6.7+ Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com (cherry picked from commit 56b0337d429356c3b9ecc36a03023c8cc856b196) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-04drm/xe/vf: Don't try to trigger a full GT reset if VFMichal Wajdeczko
VFs don't have access to the GDRST(0x941c) register that driver uses to reset a GT. Attempt to trigger a reset using debugfs: $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset or due to a hang condition detected by the driver leads to: [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe] [ ] xe 0000:00:02.1: [drm] GT0: reset queued [ ] xe 0000:00:02.1: [drm] GT0: reset started [ ] ------------[ cut here ]------------ [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? show_regs+0x6c/0x80 [ ] ? __warn+0x93/0x1c0 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? report_bug+0x182/0x1b0 [ ] ? handle_bug+0x6e/0xb0 [ ] ? exc_invalid_op+0x18/0x80 [ ] ? asm_exc_invalid_op+0x1b/0x20 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe] [ ] ? __mutex_unlock_slowpath+0x41/0x2e0 [ ] xe_mmio_write32+0x64/0x150 [xe] [ ] do_gt_reset+0x2f/0xa0 [xe] [ ] gt_reset_worker+0x14e/0x1e0 [xe] [ ] process_one_work+0x21c/0x740 [ ] worker_thread+0x1db/0x3c0 Fix that by sending H2G VF_RESET(0x5507) action instead. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4078 Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131182502.852-1-michal.wajdeczko@intel.com
2025-02-04drm/xe/relay: Don't use GFP_KERNEL for new transactionsMichal Wajdeczko
VFs use a relay transaction during the resume/reset flow and use of the GFP_KERNEL flag may conflict with the reclaim: -> #0 (fs_reclaim){+.+.}-{0:0}: [ ] __lock_acquire+0x1874/0x2bc0 [ ] lock_acquire+0xd2/0x310 [ ] fs_reclaim_acquire+0xc5/0x100 [ ] mempool_alloc_noprof+0x5c/0x1b0 [ ] __relay_get_transaction+0xdc/0xa10 [xe] [ ] relay_send_to+0x251/0xe50 [xe] [ ] xe_guc_relay_send_to_pf+0x79/0x3a0 [xe] [ ] xe_gt_sriov_vf_connect+0x90/0x4d0 [xe] [ ] xe_uc_init_hw+0x157/0x3b0 [xe] [ ] do_gt_restart+0x1ae/0x650 [xe] [ ] xe_gt_resume+0xb6/0x120 [xe] [ ] xe_pm_runtime_resume+0x15b/0x370 [xe] [ ] xe_pci_runtime_resume+0x73/0x90 [xe] [ ] pci_pm_runtime_resume+0xa0/0x100 [ ] __rpm_callback+0x4d/0x170 [ ] rpm_callback+0x64/0x70 [ ] rpm_resume+0x594/0x790 [ ] __pm_runtime_resume+0x4e/0x90 [ ] xe_pm_runtime_get_ioctl+0x9c/0x160 [xe] Since we have a preallocated pool of relay transactions, which should cover all our normal relay use cases, we may use the GFP_NOWAIT flag when allocating new outgoing transactions. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131153713.808-1-michal.wajdeczko@intel.com
2025-02-04serial: 8250_pnp: Remove unneeded ->iotype assignmentAndy Shevchenko
If ->iobase is set the default will be UPIO_PORT for ->iotype after the uart_read_and_validate_port_properties() call. Hence no need to assign that explicitly. Otherwise it will be UPIO_MEM. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: 8250_platform: Remove unneeded ->iotype assignmentAndy Shevchenko
If ->iobase is set the default will be UPIO_PORT for ->iotype after the uart_read_and_validate_port_properties() call. Hence no need to assign that explicitly. Otherwise it will be UPIO_MEM. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: 8250_of: Remove unneeded ->iotype assignmentAndy Shevchenko
If ->iobase is set the default will be UPIO_PORT for ->iotype after the uart_read_and_validate_port_properties() call. Hence no need to assign that explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: port: Make ->iotype validation global in __uart_read_properties()Andy Shevchenko
In order to make code robust against potential changes in the future move ->iotype validation outside of switch in __uart_read_properties(). If any code will be added in between that might leave the ->iotype value unknown the validation catches this up. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: port: Always update ->iotype in __uart_read_properties()Andy Shevchenko
The documentation of the __uart_read_properties() states that ->iotype member is always altered after the function call, but the code doesn't do that in the case when use_defaults == false and the value of reg-io-width is unsupported. Make sure the code follows the documentation. Note, the current users of the uart_read_and_validate_port_properties() will fail and the change doesn't affect their behaviour, neither users of uart_read_port_properties() will be affected since the alteration happens there even in the current code flow. Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: port: Assign ->iotype correctly when ->iobase is setAndy Shevchenko
Currently the ->iotype is always assigned to the UPIO_MEM when the respective property is not found. However, this will not support the cases when user wants to have UPIO_PORT to be set or preserved. Support this scenario by checking ->iobase value and default the ->iotype respectively. Fixes: 1117a6fdc7c1 ("serial: 8250_of: Switch to use uart_read_port_properties()") Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04drm/vkms: Add support for ABGR8888 pixel formatPaz Zcharya
Add support for pixel format ABGR8888, which is the default format on Android devices. This will allow us to use VKMS as the default display driver in Android Emulator (Cuttlefish) and increase VKMS adoption. Signed-off-by: Paz Zcharya <pazz@chromium.org> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129142238.562999-1-pazz@google.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-02-04serial: sc16is7xx: Fix IRQ number check behaviorAndre Werner
The logical meaning of the previous version is wrong due to a typo. If the IRQ equals 0, no interrupt pin is available and polling mode shall be used. Additionally, this fix adds a check for IRQ < 0 to increase robustness, because documentation still says that negative IRQ values cannot be absolutely ruled-out. Fixes: 104c1b9dde9d ("serial: sc16is7xx: Add polling mode if no IRQ pin is available") Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maarten Brock <maarten.brock@sttls.nl> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250121071819.1346672-1-andre.werner@systec-electronic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04drm/atomic-helper: improve CRTC enabled/connectors mismatch logging messageLuca Ceresoli
This message reports a mismatch between new_crtc_state->enable and has_connectors, which should be either both true or both false. However it does not mention which one is true and which is false, which can be useful for debugging. Add the value of both avriables to the log message. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Louis Chauvet <louis.chauvet@bootlin.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204-drm-small-improvements-v4-2-d6bbc92f12f1@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-02-04efi: Avoid cold plugged memory for placing the kernelArd Biesheuvel
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory regions that are 'cold plugged' at boot, i.e., hot pluggable memory that is available from early boot, and described as system RAM by the firmware. Existing loaders and EFI applications running in the boot context will happily use this memory for allocating data structures that cannot be freed or moved at runtime, and this prevents the memory from being unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute should be tested, and memory annotated as such should be avoided for such allocations. In the EFI stub, there are a couple of occurrences where, instead of the high-level AllocatePages() UEFI boot service, a low-level code sequence is used that traverses the EFI memory map and carves out the requested number of pages from a free region. This is needed, e.g., for allocating as low as possible, or for allocating pages at random. While AllocatePages() should presumably avoid special purpose memory and cold plugged regions, this manual approach needs to incorporate this logic itself, in order to prevent the kernel itself from ending up in a hot unpluggable region, preventing it from being unplugged. So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it where appropriate. Cc: stable@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-02-04drm/i915/lttpr: Enable Extended Wake TimeoutSuraj Kandpal
Usually retimers take around 30 to 40ms to exit all devices from sleep state. Extended wake timeout mechanism helps to give that additional time. --v2 -Grant the requested time only if greater than 1ms [Arun/Jani] -Reframe commit message [Arun] --v3 -Move the function to drm_core [Dmitry/Jani] Spec: DP v2.1 Section 3.6.12.3 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-4-suraj.kandpal@intel.com
2025-02-04drm/display/dp: Define function to setup Extended wake timeSuraj Kandpal
Extended wake timeout request helps to give additional time by reading the DPCD register through which sink requests the minimal amount of time required to wake the sink up. Source device shall keep retying the AUX tansaction till the extended timeout that is being granted for LTTPRs from the sink device. --v2 -Add documentation [Dmitry] Spec: DP v2.1 Section 3.6.12.3 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-3-suraj.kandpal@intel.com
2025-02-04drm/i915/dmc_wl: Track INITIATE_PM_DMD_REQ for DC5Gustavo Sousa
The Bspec has been updated to include INITIATE_PM_DMD_REQ in the set of register offsets that require the DMC wakelock for access during DC5. Update our table accordingly. Bspec: 71583 Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203205941.251754-1-gustavo.sousa@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
generated by cgit (git 2.34.1) at 2025-09-29 08:37:51 +0000