summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-21Merge tag 'drm-misc-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes An reset signal polarity fix for the jd9365da-h3 panel, a folio handling fix and config fix in nouveau, a dmem cgroup descendant pool handling fix, and a missing header for amdxdna. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250220-glorious-cockle-of-might-5b35f7@houat
2025-02-20soc: loongson: loongson2_guts: Add check for devm_kstrdup()Haoxiang Li
Add check for the return value of devm_kstrdup() in loongson2_guts_probe() to catch potential exception. Fixes: b82621ac8450 ("soc: loongson: add GUTS driver for loongson-2 platforms") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://lore.kernel.org/r/20250220081714.2676828-1-haoxiang_li2024@163.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-20Merge tag 'scmi-fix-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.14 Just a single fix to address the incorrect size of the Tx buffer in the function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor extensions. * tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set Link: https://lore.kernel.org/r/20250217155246.1668182-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-20Merge tag 'net-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Smaller than usual with no fixes from any subtree. Current release - regressions: - core: fix race of rtnl_net_lock(dev_net(dev)) Previous releases - regressions: - core: remove the single page frag cache for good - flow_dissector: fix handling of mixed port and port-range keys - sched: cls_api: fix error handling causing NULL dereference - tcp: - adjust rcvq_space after updating scaling ratio - drop secpath at the same time as we currently drop dst - eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl(). Previous releases - always broken: - vsock: - fix variables initialization during resuming - for connectible sockets allow only connected - eth: - geneve: fix use-after-free in geneve_find_dev() - ibmvnic: don't reference skb after sending to VIOS" * tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) Revert "net: skb: introduce and use a single page frag cache" net: allow small head cache usage with large MAX_SKB_FRAGS values nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() tcp: drop secpath at the same time as we currently drop dst net: axienet: Set mac_managed_pm arp: switch to dev_getbyhwaddr() in arp_req_set_public() net: Add non-RCU dev_getbyhwaddr() helper sctp: Fix undefined behavior in left shift operation selftests/bpf: Add a specific dst port matching flow_dissector: Fix port range key handling in BPF conversion selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range flow_dissector: Fix handling of mixed port and port-range keys geneve: Suppress list corruption splat in geneve_destroy_tunnels(). gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl(). dev: Use rtnl_net_dev_lock() in unregister_netdev(). net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net(). net: Add net_passive_inc() and net_passive_dec(). net: pse-pd: pd692x0: Fix power limit retrieval MAINTAINERS: trim the GVE entry gve: set xdp redirect target only when it is available ...
2025-02-20nvme: only allow entering LIVE from CONNECTING stateDaniel Wagner
The fabric transports and also the PCI transport are not entering the LIVE state from NEW or RESETTING. This makes the state machine more restrictive and allows to catch not supported state transitions, e.g. directly switching from RESETTING to LIVE. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20nvme-fc: rely on state transitions to handle connectivity lossDaniel Wagner
It's not possible to call nvme_state_ctrl_state with holding a spin lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync when fastfail is enabled. Instead syncing the ASSOC_FLAG and state transitions using a lock, it's possible to only rely on the state machine transitions. That means nvme_fc_ctrl_connectivity_loss should unconditionally call nvme_reset_ctrl which avoids the read race on the ctrl state variable. Actually, it's not necessary to test in which state the ctrl is, the reset work will only scheduled when the state machine is in LIVE state. In nvme_fc_create_association, the LIVE state can only be entered if it was previously CONNECTING. If this is not possible then the reset handler got triggered. Thus just error out here. Fixes: ee59e3820ca9 ("nvme-fc: do not ignore connectivity loss during connecting") Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/ Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20drm/panel: ilitek-ili9882t: fix GPIO name in error messageJohn Keeping
This driver uses the enable-gpios property and it is confusing that the error message refers to reset-gpios. Use the correct name when the enable GPIO is not found. Fixes: e2450d32e5fb5 ("drm/panel: ili9882t: Break out as separate driver") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
2025-02-20drm: writeback: Fix kernel doc nameLouis Chauvet
During the creation of drmm_ variants for writeback connector, one function was renamed, but not the kernel doc. To remove the warning, use the proper name in kernel doc. Fixes: 135d8fc7af44 ("drm: writeback: Create an helper for drm_writeback_connector initialization") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20250207142201.550ce870@canb.auug.org.au/ Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250207-b4-fix-warning-v1-1-b4964beb60a3@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-02-20gpiolib: don't bail out if get_direction() fails in gpiochip_add_data()Bartosz Golaszewski
Since commit 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") we check the return value of the get_direction() callback as per its API contract. Some drivers have been observed to fail to register now as they may call get_direction() in gpiochip_add_data() in contexts where it has always silently failed. Until we audit all drivers, replace the bail-out to a kernel log warning. Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/dfe03f88-407e-4ef1-ad30-42db53bbd4e4@samsung.com/ Tested-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250219144356.258635-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-20drm/xe/client: Skip show_run_ticks if unable to read timestampMarcin Bernatowicz
RING_TIMESTAMP registers are inaccessible in VF mode. Without drm-total-cycles-*, other keys provide little value. Skip all optional "run_ticks" keys in this case. Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205191644.2550879-3-marcin.bernatowicz@linux.intel.com
2025-02-20drm/xe/vf: Return EOPNOTSUPP for DRM_XE_DEVICE_QUERY_ENGINE_CYCLES if VFMarcin Bernatowicz
RING_TIMESTAMP registers are not available for VF (Virtual Function) drivers. Return -EOPNOTSUPP when the DRM_XE_DEVICE_QUERY_ENGINE_CYCLES ioctl is invoked on a VF device. Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205191644.2550879-2-marcin.bernatowicz@linux.intel.com
2025-02-20nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()Haoxiang Li
Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference. Fixes: ff3d43f7568c ("nfp: bpf: implement helpers for FW map ops") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20net: axienet: Set mac_managed_pmNick Hu
The external PHY will undergo a soft reset twice during the resume process when it wake up from suspend. The first reset occurs when the axienet driver calls phylink_of_phy_connect(), and the second occurs when mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the external PHY does not reinitialize the internal PHY, which causes issues with the internal PHY, resulting in the PHY link being down. To prevent this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume() function. Fixes: a129b41fe0a8 ("Revert "net: phy: dp83867: perform soft reset and retain established link"") Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20drm/ast: cursor: Move implementation to separate source fileThomas Zimmermann
Move the cursor code into a separate source file for readability. No functional changes. v2: - include <linux/bits.h> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-5-tzimmermann@suse.de
2025-02-20drm/ast: cursor: Add support for ARGB4444Thomas Zimmermann
Add support for cursor image data in ARGB4444 format. This is the hardware's native format and requires no conversion. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-4-tzimmermann@suse.de
2025-02-20drm/ast: cursor: Move format conversion to shared helperThomas Zimmermann
User-space cursor-image data is encoded in ARBG8888, while hardware supports ARGB4444. Implement the format conversion as part of the format-helper framework, so that other drivers can benefit. This allows to respect the damage area of the cursor update. In previous code, all cursor image data had to be converted on each update. Now, only the changed areas require an update. The hardware image is always updated completely, as it is required for the checksum update. The format-conversion helper still contains the old implementation's optimization of writing 2 output pixels at the same time. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-3-tzimmermann@suse.de
2025-02-20drm/ast: cursor: Calculate checksum in helperThomas Zimmermann
Setting the cursor image requires a 32-bit checksum of the cursor image data. The current cursor code converts the image to ARGB4444 format and computes the checksum in a single step. Moving the checksum calculation into a separate helper will allow to move the format conversion into a shared helper. v2: - don't loop for checksum'ing final pixel (Jocelyn) - fix typo in commit message (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-2-tzimmermann@suse.de
2025-02-20drm/i915/hdcp: Create force_hdcp14 debug fs entrySuraj Kandpal
Testing HDCP 1.4 becomes tough since the only way our code comes to HDCP 1.4 pathway is if the monitor only supports HDCP 1.4 which becomes tough to find sometimes. Setting this debug_fs entry will force use to use the HDCP 1.4 path so that more robust HDCP 1.4 testing can take place. --v2 -Move the code to intel_hdcp.c [Jani] -Remove useless debug logging [Jani] -Remove Force_HDCP from the debug file [Jani] --v3 -Remove leftover debug loggings [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213082541.3772212-1-suraj.kandpal@intel.com
2025-02-19geneve: Suppress list corruption splat in geneve_destroy_tunnels().Kuniyuki Iwashima
As explained in the previous patch, iterating for_each_netdev() and gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink() twice for the same device. If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption splat in the 2nd call of geneve_dellink(). Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate that part to default_device_exit_batch(). Fixes: 9593172d93b9 ("geneve: Fix use-after-free in geneve_find_dev().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().Kuniyuki Iwashima
Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19drm/amdgpu: update the handle ptr in get_clockgating_stateSunil Khatri
Update the *handle to amdgpu_ip_block ptr for all functions pointers of get_clockgating_state. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCERodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCE versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdkfd: Fix error handling for missing PASID in 'kfd_process_device_init_vm'Srinivasan Shanmugam
In the kfd_process_device_init_vm function, a valid error code is now returned when the associated Process Address Space ID (PASID) is not present. If the address space virtual memory (avm) does not have an associated PASID, the function sets the ret variable to -EINVAL before proceeding to the error handling section. This ensures that the calling function, such as kfd_ioctl_acquire_vm, can appropriately handle the error, thereby preventing any issues during virtual memory initialization. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:1694 kfd_process_device_init_vm() warn: missing error code 'ret' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c 1647 int kfd_process_device_init_vm(struct kfd_process_device *pdd, 1648 struct file *drm_file) 1649 { ... 1690 1691 if (unlikely(!avm->pasid)) { 1692 dev_warn(pdd->dev->adev->dev, "WARN: vm %p has no pasid associated", 1693 avm); --> 1694 goto err_get_pasid; ret = -EINVAL? 1695 } Fixes: 8544374c0f82 ("drm/amdkfd: Have kfd driver use same PASID values from graphic driver") Reported by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Xiaogang Chen <xiaogang.chen@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Remove redundant check of adevXiang Liu
There is no need to check adev for sure. Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Check aca enabled inside cper init/fini funcXiang Liu
Move code about checking aca enabled to the cper init/fini function to make code clean. Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Use firmware supported NPS modesLijo Lazar
If firmware supported NPS modes are available through CAP register, use those values for supported NPS modes. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/pm: Fetch current power limit from PMFWLijo Lazar
On SMU v13.0.12, always query the firmware to get the current power limit as it could be updated through other means also. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Add ring reset callback for JPEG4_0_3Sathishkumar S
Add ring reset function callback for JPEG4_0_3 to recover from job timeouts without a full gpu reset. V2: - sched->ready flag shouldn't be modified by HW backend (Christian) V3: - Dont modifying sched/job-submission state from HW backend (Christian) - Implement per-core reset sequence V4: - Dont create reset_mask sysfs and return -EOPNOTSUPP on VFs (Lijo) Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Add JPEG4_0_3 core reset control regSathishkumar S
Add core reset control registers for JPEG4_0_3 Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid ↵Srinivasan Shanmugam
Priority Inversion in SRIOV RLCG Register Access is a way for virtual functions to safely access GPU registers in a virtualized environment., including TLB flushes and register reads. When multiple threads or VFs try to access the same registers simultaneously, it can lead to race conditions. By using the RLCG interface, the driver can serialize access to the registers. This means that only one thread can access the registers at a time, preventing conflicts and ensuring that operations are performed correctly. Additionally, when a low-priority task holds a mutex that a high-priority task needs, ie., If a thread holding a spinlock tries to acquire a mutex, it can lead to priority inversion. register access in amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical. The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being called, which attempts to acquire the mutex. This function is invoked from amdgpu_sriov_wreg, which in turn is called from gmc_v11_0_flush_gpu_tlb. The [ BUG: Invalid wait context ] indicates that a thread is trying to acquire a mutex while it is in a context that does not allow it to sleep (like holding a spinlock). Fixes the below: [ 253.013423] ============================= [ 253.013434] [ BUG: Invalid wait context ] [ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 253.013464] ----------------------------- [ 253.013475] kworker/0:1/10 is trying to lock: [ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.013815] other info that might help us debug this: [ 253.013827] context-{4:4} [ 253.013835] 3 locks held by kworker/0:1/10: [ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu] [ 253.014154] stack backtrace: [ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024 [ 253.014224] Workqueue: events work_for_cpu_fn [ 253.014241] Call Trace: [ 253.014250] <TASK> [ 253.014260] dump_stack_lvl+0x9b/0xf0 [ 253.014275] dump_stack+0x10/0x20 [ 253.014287] __lock_acquire+0xa47/0x2810 [ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014321] lock_acquire+0xd1/0x300 [ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014562] ? __lock_acquire+0xa6b/0x2810 [ 253.014578] __mutex_lock+0x85/0xe20 [ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014782] ? sched_clock_noinstr+0x9/0x10 [ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014808] ? local_clock_noinstr+0xe/0xc0 [ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.015029] mutex_lock_nested+0x1b/0x30 [ 253.015044] ? mutex_lock_nested+0x1b/0x30 [ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu] [ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu] [ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu] [ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu] [ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu] [ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu] [ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu] [ 253.017057] amdgpu_pci_probe+0x1c2/0x660 [amdgpu] [ 253.017493] local_pci_probe+0x4b/0xb0 [ 253.017746] work_for_cpu_fn+0x1a/0x30 [ 253.017995] process_one_work+0x21e/0x680 [ 253.018248] worker_thread+0x190/0x330 [ 253.018500] ? __pfx_worker_thread+0x10/0x10 [ 253.018746] kthread+0xe7/0x120 [ 253.018988] ? __pfx_kthread+0x10/0x10 [ 253.019231] ret_from_fork+0x3c/0x60 [ 253.019468] ? __pfx_kthread+0x10/0x10 [ 253.019701] ret_from_fork_asm+0x1a/0x30 [ 253.019939] </TASK> v2: s/spin_trylock/spin_lock_irqsave to be safe (Christian). Fixes: e864180ee49b ("drm/amdgpu: Add lock around VF RLCG interface") Cc: lin cao <lin.cao@amd.com> Cc: Jingwen Chen <Jingwen.Chen2@amd.com> Cc: Victor Skvortsov <victor.skvortsov@amd.com> Cc: Zhigang Luo <zhigang.luo@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: 3.2.321Taimur Hassan
Summary: * Add support for disconnected eDP streams * Add log for MALL entry on DCN32x * Add DCC/Tiling reset helper for DCN and DCE * Guard against setting dispclk low when active * Other minor fixes Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add support for disconnected eDP streamsHarry VanZyllDeJong
[Why] eDP may not be connected to the GPU on driver start causing fail enumeration. [How] Move the virtual signal type check before the eDP connector signal check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: dpia should avoid encoder used by dp2Peichen Huang
[WHY] In current HPO DP2 implementation, driver would enable/disable DIG encoder when configuring HPO DP2. Therefore, usb4 dp tunnelling should not use the DIG encoder if the corresponded phy is used by a HPO DP2 stream. [HOW] A DP2 stream is treated as a dig stream. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Guard against setting dispclk low when activeNicholas Kazlauskas
[Why] We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimization for when all displays are disabled. [How] Defer dispclk optimization until safe_to_lower = true and display_count reaches 0. Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW. Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Reviewed-by: Leo Chen <leo.chen@amd.com> Reviewed-by: Syed Hassan <syed.hassan@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Fix BT2020 YCbCr limited/full range inputIlya Bakoulin
[Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Robert Mader <robert.mader@collabora.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add log for MALL entry on DCN32xAurabindo Pillai
[Why&How] Add a dyndbg log entry to check whether the driver requested scanout from MALL cache to PMFW via DMCUB Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add total_num_dpps_required field to informative structureOleh Kuzhylnyi
[Why] The informative structure needs to be extended by the total number of DPPs required per each active plane. The new informative field is going to be used as a statistical indicator. [How] The dml2_core_calcs_get_informative() routine must count a total number of DPPs. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Read LTTPR ALPM caps during link cap retrievalGeorge Shen
[Why] The latest DP spec requires the DP TX to read DPCD F0000h through F0009h when detecting LTTPR capabilities for the first time. [How] Update LTTPR cap retrieval to read up to F0009h (two more bytes than the previous F0007h), and store the LTTPR ALPM capabilities. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Print seamless boot message in mark_seamless_boot_streamAlex Hung
[WHAT & HOW] Add a message so users know the stream will be used for seamless boot. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCNRodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCN versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Rename panic functionRodrigo Siqueira
Rename dc_plane_force_update_for_panic to dc_plane_force_dcc_and_tiling_disable to describe the function operation in the name. Also, this function might be used in other contexts, and a more generic name can be helpful for this purpose. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add DCC/Tiling reset helper for DCN and DCERodrigo Siqueira
This commit introduces a function helper for resetting DCN/DCE DCC and tiling. Those functions are generic for their respective DCN/DCE, so they were added to the oldest version of each architecture. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19Revert "drm/amd/display: Request HW cursor on DCN3.2 with SubVP"Leo Zeng
This reverts commit 13437c91606c9232c747475e202fe3827cd53264. Reason to revert: idle power regression found in testing. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Don't treat wb connector as physical in ↵Harry Wentland
create_validate_stream_for_sink Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector. While dereferencing aconnector->base will "work" it's wrong and might lead to unknown bad things. Just... don't. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Exit idle optimizations before accessing PHYOvidiu Bunea
[why & how] By default, DCN HW is in idle optimized state which does not allow access to PHY registers. If BIOS powers up the DCN, it is fine because they will power up everything. Only exit idle optimized state when not taking control from VBIOS. Fixes: be704e5ef4bd ("Revert "drm/amd/display: Exit idle optimizations before attempt to access PHY"") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/i915/dp: Fix disabling the transcoder function in 128b/132b modeImre Deak
During disabling the transcoder in DP 128b/132b mode (both in case of an MST master transcoder and in case of SST) the transcoder function must be first disabled without changing any other field in the register (in particular leaving the DDI port and mode select fields unchanged) and clearing the DDI port and mode select fields separately, later during the disabling sequences. Fix the sequence accordingly. Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix disabling the transcoder function in 128b/132b modeImre Deak
During disabling the transcoder in DP 128b/132b mode (both in case of an MST master transcoder and in case of SST) the transcoder function must be first disabled without changing any other field in the register (in particular leaving the DDI port and mode select fields unchanged) and clearing the DDI port and mode select fields separately, later during the disabling sequences. Fix the sequence accordingly. Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19accel/amdxdna: Add missing include linux/slab.hSu Hui
When compiling without CONFIG_IA32_EMULATION, there can be some errors: drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’: drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration of function ‘kfree’. 197 | kfree(mb_msg); | ^~~~~ drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’: drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration of function ‘kzalloc’. 418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL); | ^~~~~~~ Add the missing include. Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
generated by cgit (git 2.34.1) at 2025-09-28 15:49:20 +0000