| Age | Commit message (Collapse) | Author |
|---|
|
Exact match feature is only available in CN10K-B.
Unregister exact match devlink entry only for
this silicon variant.
Fixes: 87e4ea29b030 ("octeontx2-af: Debugsfs support for exact match.")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230131061659.1025137-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang static analysis reports
drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of
'+' is a garbage value [core.UndefinedBinaryOperatorResult]
ktime_add_ns(shhwtstamps.hwtstamp, adjust);
^ ~~~~~~~~~~~~~~~~~~~~
igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp
if the mac type is unknown. This should be treated as an error.
Fixes: 81b055205e8b ("igc: Add support for RX timestamping")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A mutex may sleep, which is not permitted in atomic context.
Avoid a case where this may arise by moving the to
nfp_flower_lag_get_info_from_netdev() in nfp_tun_write_neigh() spinlock.
Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230131080313.2076060-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These sysfs nodes are tested supported, so enable them.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.
Ensure that they're set during initialization.
Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Enable HDP clock gating control for gfx 11.0.3.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314
[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START
[How]
Add missing brackets for this calculation
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Pull virtio fixes from Michael Tsirkin:
"Just small bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: ifcvf: Do proper cleanup if IFCVF init fails
vhost-scsi: unbreak any layout for response
tools/virtio: fix the vringh test for virtio ring changes
vhost/net: Clear the pending messages when the backend is removed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific, so
those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which is
applied only to Xen PV. The other major parts are ASoC Intel SOF and
AVS fixes that are scattered as various small code changes. The rest
are device-specific fixes and quirks for HD- and USB-audio, FireWire
and ASoC AMD / HDMI"
* tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: firewire-motu: fix unreleased lock warning in hwdep device
ALSA: memalloc: Workaround for Xen PV
ASoC: cs42l56: fix DT probe
ASoC: codecs: wsa883x: correct playback min/max rates
ALSA: hda/realtek: Add Acer Predator PH315-54
ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022 into DMI table
ALSA: hda: Do not unset preset when cleaning up codec
ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure
ASoC: hdmi-codec: zero clear HDMI pdata
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
ASoC: Intel: sof_ssp_amp: always set dpcm_capture for amplifiers
ASoC: Intel: sof_nau8825: always set dpcm_capture for amplifiers
ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers
ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless
ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform
ASoC: SOF: keep prepare/unprepare widgets in sink path
ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL
ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0
...
|
|
Just replace magic numbers by MD_RESYNC_* enumerations.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
dm raid calls md_stop to stop the raid device. It needs to
free the writes_pending here.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.
After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
This helper function will be used in next patch. It's easy for
understanding.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:
md_do_sync thread control thread
// setup resync
mddev->recovery_cp = 0
j = 0
mddev->curr_resync = MD_RESYNC_ACTIVE
// e.g., set array as idle
set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
// resync loop
// check INTR before calling sync_request
!test_bit(MD_RECOVERY_INTR, &mddev->recovery
// resync interrupted
// update recovery_cp from 0 to 3
// the resync of three 3 sectors will be skipped
mddev->recovery_cp = 3
Fixes: eac58d08d493 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync")
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
The dead code removal has led to 'need_transceiver' not being
used at all when OTG support is disabled:
drivers/usb/host/ohci-omap.c: In function 'ohci_omap_reset':
drivers/usb/host/ohci-omap.c:99:33: error: unused variable 'need_transceiver' [-Werror=unused-variable]
99 | int need_transceiver = (config->otg != 0);
Change the #ifdef check into an IS_ENABLED() check to make the
code more readable and let the compiler see where it is used.
Fixes: 8825acd7cc8a ("ARM: omap1: remove dead code")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The htc-pasic3 MFD device was only used in the PXA magician
machine that is now removed, so this can be recycled as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver was used by the mfd/asic3 and mfd/htc-pasic3 drivers, but
both of those are removed as part of the PXA spring cleaning, which
leaves the w1 support orphaned as well.
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The TMIO MFD driver is getting removed, so its OHCI portion is not
used any more either.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The w100fb was used on various PXA based pocketpc machines,
all of which are now removed, so remove this dirver sd well.
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the TMIO MFD support removed, the framebuffer driver can be
removed as well.
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the TMIO MFD support gone, the corresponding MMC host driver can
be removed as well. The remaining tmio_mmc_core module however is still
used by both the Renesas and Socionext host drivers.
Cc: Ian Molton <spyro@f2s.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The v3020 RTC driver was exclusively used by the now removed
cm-x300.c machine.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver was used for a couple of Intel PXA and Samsung S3C24xx
based PDAs, but all of those are now removed from the kernel, so
the driver itself is no longer useful.
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: linux-pm@vger.kernel.org
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A number of boards got removed, so this code is now orphaned.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PXA zylonite platform was removed, so this driver has no
remaining users.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The pxa930 platform is getting removed and no upstream machine
ever defined a rotary keyboard device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The pxa930 SoC support is getting removed, and no upstream
board ever provided the trkball device that this driver
relies on.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the following minor changes which were reported by colleagues
while reviewing this code:
- Remove the parentheses from around the LOOP_DEFAULT_HW_Q_DEPTH
definition since these are superfluous.
- Accept other number formats than decimal, e.g. hexadecimal.
- Do not set hw_queue_depth to an out-of-range value, even if that value
won't be used.
- Use the LOOP_DEFAULT_HW_Q_DEPTH macro in the kernel module parameter
description to prevent that the description gets out of sync.
This patch has been tested as follows:
# modprobe -r loop
# modprobe loop hw_queue_depth=-1
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=0
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=1; cat /sys/module/loop/parameters/hw_queue_depth
1
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=0x10
16
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=128
128
# modprobe -r loop; modprobe loop hw_queue_depth=129; cat /sys/module/loop/parameters/hw_queue_depth
129
# modprobe -r loop; modprobe loop hw_queue_depth=$((1<<32))
modprobe: ERROR: could not insert 'loop': Numerical result out of range
See also commit ef44c50837ab ("loop: allow user to set the queue
depth").
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230130211347.832110-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NVMe In-Band authentication uses two kinds of works: chap->auth_work and
ctrl->dhchap_auth_work. The latter work flushes or cancels the former
work. However, the both works are queued to the same workqueue nvme-wq.
It results in the lockdep WARNING as follows:
WARNING: possible recursive locking detected
6.2.0-rc4+ #1 Not tainted
--------------------------------------------
kworker/u16:7/69 is trying to acquire lock:
ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: start_flush_work+0x2c5/0x380
but task is already holding lock:
ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: process_one_work+0x210/0x410
To avoid the WARNING, introduce a new workqueue nvme-auth-wq dedicated
to chap->auth_work.
Reported-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/linux-nvme/20230130110802.paafkiipmitwtnwr@carbon.lan/
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme driver will freeze the IO queues in response to an admin
command with CSE bits set. These bits notify the host that the command
that's about to be executed needs to be done exclusively, hence the
freeze.
The Security Receive command is often reported by multiple vendors with
CSE bits set. The reason for this is that the result depends on the
previous Security Send. This has nothing to do with IO queues, though,
so the driver is taking an overly cautious response to seeing this
passthrough command, while unable to fufill the intended admin queue
action.
Rather than freeze IO during this harmless command, mask off the
effects. This freezing is observed to cause IO latency spikes when host
software periodically validates the security state of the drives.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Instead of appending command effects flags per IO, set the known effects
flags the driver needs to react to just once during initial setup.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is due to the fact that the host is allowed to pass the controller
an sgl describing a buffer that is larger than the payload itself
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This provides additional details about the rq/cmd that is timed out
example log if CONFIG_NVME_VERBOSE_ERRORS is configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc Write (0x1)"
example log if CONFIG_NVME_VERBOSE_ERRORS is not configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc I/O Cmd (0x1)"
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_opcode_str will handle io/admin/fabrics ops
This improves NVMe errors logging
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
After moving the nvme_passthru_end call to the callers of
nvme_execute_passthru_rq, this function has become quite pointless,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
The 'struct nvme_iod' space is appended at the end of the preallocated
'struct request', and padded to the cache line size. This leaves some
free memory (in most kernel configs) up for grabs.
Instead of appending the nvme data descriptor addresses after the
scatterlist, inline these for free within struct nvme_iod. There is now
enough space in the mempool for 128 possibe segments.
And without increasing the size of the preallocated requests, we can
hold up to 5 PRP descriptor elements, allowing the driver to increase
its max transfer size to 8MB.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The driver uses the dma entries for setting up its command's SGL/PRP
lists. The dma mapping might have fewer entries than the physical
segments, so check the dma mapped count to determine which nvme data
layout method is more optimal.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The max segments this driver can see is 127, well below the 256
threshold needed to add an nvme sgl segment descriptor. Remove all the
useless checks and dead code.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe status codes are part of the wire protocol, and shouldn't be
fabricated in the stack. So with this patch the authentication code
is switched over to use error codes; as a side effect authentication
failures due to internal error won't be retried anymore.
But that shouldn't have happened anyway.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The NVMe 2.0 spec defines the ATR and ASCR bits in the AUTHREQ
connect response field to be mutually exclusive. So to clarify the
handling here switch the AUTHREQ handling to use the bit definitions
and check for both bits.
And while we're at it, add a message to the user that secure
concatenation is not supported (yet).
Suggested-by: Mark Lehrer <mark.lehrer@wdc.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvme_alloc_io_tag_set(), the connect_q pointer should be set to NULL
in case of error to avoid potential invalid pointer dereferences.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If nvme_alloc_admin_tag_set() fails, the admin_q and fabrics_q pointers
are left with an invalid, non-NULL value. Other functions may then check
the pointers and dereference them, e.g. in
nvme_probe() -> out_disable: -> nvme_dev_remove_admin().
Fix the bug by setting admin_q and fabrics_q to NULL in case of error.
Also use the set variable to free the tag_set as ctrl->admin_tagset isn't
initialized yet.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
