| Age | Commit message (Collapse) | Author |
|---|
|
The previous algorithm was pretty broken.
- The inner loop had a '(m > m_max)' condition, and the value of 'm'
would increase in each iteration;
- Each iteration would actually multiply 'm' by two, so it is not needed
to re-compute the whole equation at each iteration;
- It would loop until (m & 1) == 0, which means it would loop at most
once.
- The outer loop would divide the 'n' value by two at the end of each
iteration. This meant that for a 12 MHz parent clock and a 1.2 GHz
requested clock, it would first try n=12, then n=6, then n=3, then
n=1, none of which would work; the only valid value is n=2 in this
case.
Simplify this algorithm with a single for loop, which decrements 'n'
after each iteration, addressing all of the above problems.
Fixes: bdbfc029374f ("clk: ingenic: Add support for the JZ4760")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221214123704.7305-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The cxl_pmem.ko module houses the driver for both cxl_nvdimm_bridge
objects and cxl_nvdimm objects. When the core creates a cxl_nvdimm it
arranges for it to be autoremoved when the bridge goes down. However, if
the bridge never initialized because the cxl_pmem.ko module never
loaded, it sets up a the following crash scenario:
BUG: kernel NULL pointer dereference, address: 0000000000000478
[..]
RIP: 0010:cxl_nvdimm_probe+0x99/0x140 [cxl_pmem]
[..]
Call Trace:
<TASK>
cxl_bus_probe+0x17/0x50 [cxl_core]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xd2/0x1c0
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x1b1/0x200
driver_register+0x89/0xe0
cxl_pmem_init+0x50/0xff0 [cxl_pmem]
It turns out the recent rework to simplify nvdimm probing obviated the
need to unregister cxl_nvdimm objects at cxl_nvdimm_bridge ->remove()
time. Leave the cxl_nvdimm device registered until the hosting
cxl_memdev departs. The alternative is that the cxl_memdev needs to be
reattached whenever the cxl_nvdimm_bridge attach state cycles, which is
awkward and unnecessary.
The only requirement is to make sure that when the cxl_nvdimm_bridge
goes away any dependent cxl_nvdimm objects are shutdown. Handle that in
unregister_nvdimm_bus().
With these registration entanglements removed there is no longer a need
to pre-load the cxl_pmem module in cxl_acpi.
Fixes: cb9cfff82f6a ("cxl/acpi: Simplify cxl_nvdimm_bridge probing")
Reported-by: Gregory Price <gregory.price@memverge.com>
Debugged-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167426077263.3955046.9695309346988027311.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Lockdep reports that acpi_nfit_shutdown() may deadlock against an
opportune acpi_nfit_scrub(). acpi_nfit_scrub () is run from inside a
'work' and therefore has already acquired workqueue-internal locks. It
also acquiires acpi_desc->init_mutex. acpi_nfit_shutdown() first
acquires init_mutex, and was subsequently attempting to cancel any
pending workqueue items. This reversed locking order causes a potential
deadlock:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc3 #116 Tainted: G O N
------------------------------------------------------
libndctl/1958 is trying to acquire lock:
ffff888129b461c0 ((work_completion)(&(&acpi_desc->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x43/0x450
but task is already holding lock:
ffff888129b460e8 (&acpi_desc->init_mutex){+.+.}-{3:3}, at: acpi_nfit_shutdown+0x87/0xd0 [nfit]
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
*** DEADLOCK ***
Since the workqueue manipulation is protected by its own internal locking,
the cancellation of pending work doesn't need to be done under
acpi_desc->init_mutex. Move cancel_delayed_work_sync() outside the
init_mutex to fix the deadlock. Any work that starts after
acpi_nfit_shutdown() drops the lock will see ARS_CANCEL, and the
cancel_delayed_work_sync() will safely flush it out.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230112-acpi_nfit_lockdep-v1-1-660be4dd10be@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Convert an empty line to " *" to avoid a kernel-doc warning:
drivers/dax/super.c:478: warning: bad line:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: nvdimm@lists.linux.dev
Link: https://lore.kernel.org/r/20230117070249.31934-1-rdunlap@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
struct bkey has internal padding in a union, but it isn't always named
the same (e.g. key ## _pad, key_p, etc). This makes it extremely hard
for the compiler to reason about the available size of copies done
against such keys. Use unsafe_memcpy() for now, to silence the many
run-time false positive warnings:
memcpy: detected field-spanning write (size 264) of single field "&i->j" at drivers/md/bcache/journal.c:152 (size 240)
memcpy: detected field-spanning write (size 24) of single field "&b->key" at drivers/md/bcache/btree.c:939 (size 16)
memcpy: detected field-spanning write (size 24) of single field "&temp.key" at drivers/md/bcache/extents.c:428 (size 16)
Reported-by: Alexandre Pereira <alexpereira@disroot.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216785
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230106060229.never.047-kees@kernel.org
|
|
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
We still need to refer to port while removing payload at commit_tail.
we should keep the kref till then to release.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Now the vc_start_slot is controlled at drm side. When we
service a long HPD, we still need to run
dm_helpers_dp_mst_write_payload_allocation_table() to update
drm mst_mgr's relevant variable. Otherwise, on the next plug-in,
payload will get assigned with a wrong start slot.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu expects to update payload table for one stream one time
by calling dm_helpers_dp_mst_write_payload_allocation_table().
Currently, it get modified to try to update HW payload table
at once by referring mst_state.
[How]
This is just a quick workaround. Should find way to remove the
temporary struct dc_dp_mst_stream_allocation_table later if set
struct link_mst_stream_allocatio directly is possible.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Looks like I made a pretty big mistake here without noticing: it seems when
I moved the assignments of mst_state->pbn_div I completely missed the fact
that the reason for us calling drm_dp_mst_update_slots() earlier was to
account for the fact that we need to call this function using info from the
root MST connector, instead of just trying to do this from each MST
encoder's atomic check function. Otherwise, we end up filling out all of
DC's link information with zeroes.
So, let's restore that and hopefully fix this DSC regression.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new mes ip block
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13.0.0 AllowIHInterrupt message mapping.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Rebase of driver has incorrect unconditional trap enablement
for GFX11 when adding mes queues.
Reported-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
The Granite Rapids CPU model uses similar memory controller registers
as Sapphire Rapids server but with some different configurations:
- Various memory controller numbers for different Granite Rapids CPUs.
So detect the number of present memory controllers at run time.
- Different MMIO offsets of memory controllers.
- Different triples of bus/dev/fun of some PCI devices used in i10nm_edac.
Add above configurations and Granite Rapids CPU model ID for EDAC support.
[Tony: Fixed 2 typos s/strcture/structure/]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
The numbers of memory controllers per socket, channels per memory
controller, DIMMs per channel and the triples of bus/device/function
of PCI devices used in i10nm_edac can be CPU model specific.
Add new fields to the structure res_config for above numbers and
triples to make them CPU model specific.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
The Emerald Rapids CPU model uses similar memory controller registers
as Sapphire Rapids server. Add Emerald Rapids CPU model number ID for
EDAC support.
Tested-by: Li Zhang <li4.zhang@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
skx_mce_check_error() returns early if the error isn't from memory.
So when skx_mce_output_error() is invoked from skx_mce_check_error(),
it doesn't need to re-check whether the error is from memory. Delete
the duplicated and unreachable code from skx_mce_output_error().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
The current {skx,i10nm}_edac miss the EDAC support to decode errors from
the 1st level memory (the fast "near" memory as cache) of the 2-level
memory system. Introduce a helper function skx_error_in_mem() to check
whether errors are from memory at the beginning of skx_mce_check_error().
As long as the errors are from memory (either the 1-level memory system
or the 2-level memory system), decode the errors.
Reported-and-tested-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com
|
|
If thermal_class is not registered with the driver core, there is no way
to expose the interfaces used by the thermal control framework, so
prevent thermal zones and cooling devices from being registered in
that case by returning an error from object registration functions.
For this purpose, use a thermal_class pointer that will be NULL if the
class is not registered. To avoid wasting memory in that case, allocate
the thermal class object dynamically and if it fails to register, free
it and clear the thermal_class pointer to NULL.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The thermal_core.c files contains a lot of functions handling
different thermal components like the governors, the trip points, the
cooling device, the OF cooling device, etc ...
This organization does not help to migrate to a more sane code where
there is a better self-encapsulation as all the components' internals
can be directly accessed from a single file.
For the sake of clarity, let's move the thermal trip points code in a
dedicated thermal_trip.c file and add a function to browse all the
trip points like we do with the thermal zones, the govenors and the
cooling devices.
The same can be done for the cooling devices and the governor code but
that will come later as the current work in the thermal framework is
to fix the trip point handling and use a generic trip point structure.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As per documentation for the ida_destroy() function: "If the IDA is
already empty, there is no need to call this function."
The thermal framework is in the init sequence, so the ida was not yet
used and consequently it is empty in case of error.
There is no need to call ida_destroy(), let's remove the calls.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The thermal subsystem initialization miss an netlink unregistering
function in the error. Add it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently connect/disconnect of USB cable calls afunc_bind and
eventually increments the bNumEndpoints. Performing multiple
plugin/plugout will increment bNumEndpoints incorrectly, and on
the next plug-in it leads to invalid configuration of descriptor
and hence enumeration fails.
Fix this by resetting the value of bNumEndpoints to 1 on every
afunc_bind call.
Fixes: 40c73b30546e ("usb: gadget: f_uac2: add adaptive sync support for capture")
Cc: stable <stable@kernel.org>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1674631645-28888-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This device has a touchscreen thats report a battery even if it doesn't
have one.
Ask Linux to ignore the battery so it will not always report it as low.
[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Marco Rodolfi <marco.rodolfi@tuta.io>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().
Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.
Note that this also fix a minor coding style (a comment indentation)
around the fixed code.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().
Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This turns the Cirrus ep93xx gpio irqchip immutable.
Preserve per-chip labels by adding an ->irq_print_chip() callback.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix wrong translation of irq numbers in port F handler, as ep93xx hwirqs
increased by 1, we should simply decrease them by 1 in translation.
Fixes: 482c27273f52 ("ARM: ep93xx: renumber interrupts")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We recently added locking to this function but one error path was
over looked. Drop the lock before returning.
Fixes: e5464277625c ("gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
My last commit to fix profile mode displays on AMD platforms caused
an issue on Intel platforms - sorry!
In it I was reading the current functional mode (MMC, PSC, AMT) from
the BIOS but didn't account for the fact that on some of our Intel
platforms I use a different API which returns just the profile and not
the functional mode.
This commit fixes it so that on Intel platforms it knows the functional
mode is always MMC.
I also fixed a potential problem that a platform may try to set the mode
for both MMC and PSC - which was incorrect.
Tested on X1 Carbon 9 (Intel) and Z13 (AMD).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963
Fixes: fde5f74ccfc7 ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 SoC updates for 6.3:
It contains:
- the addition of SAMA7G54D1G, SAMA7G54D2G, SAMA7G54D4G SiP identifiers
* tag 'at91-soc-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: add support in soc driver for new SAMA7G54 SiPs
Link: https://lore.kernel.org/r/20230119113202.43543-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The namespace head saves the Command Set Indicator enum, so use that
instead of the Command Set Selected. The two values are not the same.
Fixes: 831ed60c2aca2d ("nvme: also return I/O command effects from nvme_command_effects")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit a286ba738714 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.
Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.
Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, all in drivers.
The biggest are the UFS devfreq fixes which address a lock inversion
and the two iscsi_tcp fixes which try to prevent a use after free from
userspace still accessing an area which the kernel has released (seen
by KASAN)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: device_handler: alua: Remove a might_sleep() annotation
scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
scsi: ufs: core: Fix devfreq deadlocks
scsi: hpsa: Fix allocation size for scsi_host_alloc()
scsi: target: core: Fix warning on RT kernels
|
|
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The thermal framework gives the possibility to register the trip
points along with the thermal zone. When that is done, no get_trip_*
callbacks are needed and they can be removed.
Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.
In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* thermal: (734 commits)
thermal: core: call put_device() only after device_register() fails
Linux 6.2-rc4
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
kallsyms: Fix scheduling with interrupts disabled in self-test
ata: pata_cs5535: Don't build on UML
lockref: stop doing cpu_relax in the cmpxchg loop
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
efi: tpm: Avoid READ_ONCE() for accessing the event log
io_uring: lock overflowing for IOPOLL
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
...
|
|
Lets not open code device_unregister() unnecessarily.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
thermal_release() already frees cdev, let it do rest of the cleanup as
well in order to simplify the error paths in
__thermal_cooling_device_register().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The nvme device may have a namespace with the root partition, so make
sure we've completed scanning before returning from the async probe.
Fixes: eac3ef262941 ("nvme-pci: split the initial probe from the rest path")
Reported-by: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
__ffs_ep0_queue_wait executes holding the spinlock of &ffs->ev.waitq.lock
and unlocks it after the assignments to usb_request are done.
However in the code if the request is already NULL we bail out returning
-EINVAL but never unlocked the spinlock.
Fix this by adding spin_unlock_irq &ffs->ev.waitq.lock before returning.
Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230124091149.18647-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With vbus override enabled when in OTG dr_mode, Host<->Peripheral
switch now works on SM8550, otherwise the DWC3 seems to be stuck
in Host mode only.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230123-topic-sm8550-upstream-dwc3-qcom-otg-v2-1-2d400e598463@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops") moved
up the q->streaming = 1 assignment to before the call to vb2_start_streaming().
This does make sense since q->streaming indicates that VIDIOC_STREAMON is called,
and the call to start_streaming happens either at that time or later if
q->min_buffers_needed > 0. So q->streaming should be 1 before start_streaming
is called.
However, it turned out that some drivers use vb2_is_streaming() in buf_queue,
and if q->min_buffers_needed == 0, then that will now return true instead of
false.
So for the time being revert to the original behavior.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.
The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.
Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com
|
|
Add a new (static inline) apple_gmux_detect() helper to apple-gmux.h
which can be used for gmux detection instead of apple_gmux_present().
The latter is not really reliable since an ACPI device with a HID
of APP000B is present on some devices without a gmux at all, as well
as on devices with a newer (unsupported) MMIO based gmux model.
This causes apple_gmux_present() to return false-positives on
a number of different Apple laptop models.
This new helper uses the same probing as the actual apple-gmux
driver, so that it does not return false positives.
To avoid code duplication the gmux_probe() function of the actual
driver is also moved over to using the new apple_gmux_detect() helper.
This avoids false positives (vs _HID + IO region detection) on:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/master/test-16/dmesg
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-3-hdegoede@redhat.com
|
|
This is a preparation patch for adding a new static inline
apple_gmux_detect() helper which actually checks a supported
gmux is present, rather then only checking an ACPI device with
the HID is there as apple_gmux_present() does.
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-2-hdegoede@redhat.com
|
