| Age | Commit message (Collapse) | Author |
|---|
|
IRQ handler"
This reverts commit f24771b62a83239f0dce816bddf0f6807f436235 as it is
reported to break the build.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com
Fixes: f24771b62a83 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler")
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Caron <valentin.caron@foss.st.com> # V3
Cc: Marek Vasut <marex@denx.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the original implementation of dwmac5
commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:
drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line:
* struct i2c_spec_values:
drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line:
* struct rk3x_i2c_calced_timings:
drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line:
* struct rk3x_i2c_soc_data:
drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Generate a START condition, which triggers a REG_INT_START interrupt.
drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead
drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead
drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get timing values of I2C specification
drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Calculate divider values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Calculate timing values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Setup I2C registers for an I2C operation specified by msgs, num.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add "struct" to prevent this kernel-doc warning:
drivers/i2c/busses/i2c-axxia.c:135: warning: cannot understand function prototype: 'struct axxia_i2c_dev '
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-19:
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119195908.7670-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Reject display plane with height == 0 (Drew)
- re-disable RC6p on Sandy Bridge (Sasa)
- Fix hugepages' selftest (Chris)
- DG2 hw workarounds (Matt Atwood)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/ANNWctpc7R@intel.com
|
|
Zero-length arrays are deprecated[1]. Replace npe_load_firmware's
union of 0-length arrays with flexible arrays. Detected with GCC 13,
using -fstrict-flex-arrays=3:
drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'npe_load_firmware':
drivers/soc/ixp4xx/ixp4xx-npe.c:570:60: warning: array subscript i is outside array bounds of 'u32[0]' {aka 'unsigned int[]'} [-Warray-bounds=]
570 | image->data[i] = swab32(image->data[i]);
include/uapi/linux/swab.h:115:54: note: in definition of macro '__swab32'
115 | #define __swab32(x) (__u32)__builtin_bswap32((__u32)(x))
| ^
drivers/soc/ixp4xx/ixp4xx-npe.c:570:42: note: in expansion of macro 'swab32'
570 | image->data[i] = swab32(image->data[i]);
| ^~~~~~
drivers/soc/ixp4xx/ixp4xx-npe.c:522:29: note: while referencing 'data'
522 | u32 data[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230105215706.never.027-kees@kernel.org
|
|
Commit f1e525009493 ("x86/boot: Skip realmode init code when running as
Xen PV guest") missed one code path accessing real_mode_header, leading
to dereferencing NULL when suspending the system under Xen:
[ 348.284004] PM: suspend entry (deep)
[ 348.289532] Filesystems sync: 0.005 seconds
[ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 348.292457] OOM killer disabled.
[ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done.
[ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug)
[ 348.749228] PM: suspend devices took 0.352 seconds
[ 348.769713] ACPI: EC: interrupt blocked
[ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c
[ 348.816080] #PF: supervisor read access in kernel mode
[ 348.816081] #PF: error_code(0x0000) - not-present page
[ 348.816083] PGD 0 P4D 0
[ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1
[ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022
[ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20
Fix that by adding an optional acpi callback allowing to skip setting
the wakeup address, as in the Xen PV case this will be handled by the
hypervisor anyway.
Fixes: f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/all/20230117155724.22940-1-jgross%40suse.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
|
|
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.2-rc5
Here are some new device ids, mostly for Quectel modems.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EM05CN modem
USB: serial: option: add Quectel EM05CN (SG) modem
USB: serial: cp210x: add SCALANCE LPE-9000 device id
USB: serial: option: add Quectel EC200U modem
USB: serial: option: add Quectel EM05-G (RS) modem
USB: serial: option: add Quectel EM05-G (GR) modem
USB: serial: option: add Quectel EM05-G (CS) modem
|
|
Arm SPEv1.2 (Armv8.7/v9.2) adds a new event, 'not taken', in bit 6 of
the PMSEVFR_EL1 register. Update arm_spe_pmsevfr_res0() to support the
additional event.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-6-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that the SPE register definitions include enums for some PMSIDR_EL1
fields, use them in the driver in place of magic values.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-5-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that generated sysregs are in place, update the register field
accesses. The use of BIT() is no longer needed with the new defines. Use
FIELD_GET and FIELD_PREP instead of open coding masking and shifting.
No functional change.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-4-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We currently have a non-standard SYS_ prefix in the constants generated
for the SPE register bitfields. Drop this in preparation for automatic
register definition generation.
The SPE mask defines were unshifted, and the SPE register field
enumerations were shifted. The autogenerated defines are the opposite,
so make the necessary adjustments.
No functional changes.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-2-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Similar to commit 121a8fc088f1 ("arm64/sysreg: Use feature numbering for
PMU and SPE revisions") use feature numbering instead of architecture
versions for the PMSEVFR_EL1 Res0 defines.
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-1-327f860daf28@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for ACPI based device registration so that the driver
can be also enabled through ACPI table.
While at that change the DT specific API's to device_* API's so that
both DT based and ACPI based probing works.
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20221209053715.3930071-1-gthiagarajan@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for ACPI based device registration so that the driver
can be also enabled through ACPI table.
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20221209053607.3929964-1-gthiagarajan@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although we treat the DTM counters as free-running such that we're not
too concerned about the initial DTM state, it's possible for a previous
user to have left DTM counters enabled and paired with DTC counters.
Thus if the first events are scheduled using some, but not all, DTMs,
the as-yet-unused ones could end up adding spurious increments to the
event counts at the DTC. Make sure we sync our initial DTM_PMU_CONFIG
state to all the DTMs at probe time to avoid that possibility.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ba5f38b3dc733cd06bfb5e659b697e76d18c2183.1670269572.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use hisi_pmu_init() function to simplify initialization of "cpa_pmu->pmu".
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-4-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use "hisi_pmu" to simplify the parameter list for the hisi_pmu_init()
function.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Missed initialization the variable of pmu::capabilities when extract
the initialization code of hisi_pmu->pmu into a function.
HISI UNCORE PMU drivers counters that not support context exclusion.
So we have to advertise the PERF_PMU_CAP_NO_EXCLUDE capability.
This ensures that perf will prevent us from handling events where
any exclusion flags are set.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230119100307.3660-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I got the following WARNING message while removing driver(ds2482):
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
exit_signals+0x6c/0x550
do_exit+0x2b4/0x17e0
kthread_exit+0x52/0x60
kthread+0x16d/0x1e0
ret_from_fork+0x1f/0x30
The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning.
Fixes: 3c52e4e62789 ("W1: w1_process, block or sleep")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205101558.3599162-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I got a deadloop report while doing device(ds2482) add/remove test:
[ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
...
__w1_remove_master_device() can't return, because the dev->refcnt is not zero.
w1_add_master_device() |
w1_alloc_dev() |
atomic_set(&dev->refcnt, 2) |
kthread_run() |
|__w1_remove_master_device()
| kthread_stop()
// KTHREAD_SHOULD_STOP is set, |
// threadfn(w1_process) won't be |
// called. |
kthread() |
| // refcnt will never be 0, it's deadloop.
| while (atomic_read(&dev->refcnt)) {...}
After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.
We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205080434.3149205-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(Actually, this is fixing the "Read the Current Status" command sent to
the device's outgoing mailbox, but it is only currently used for the PWM
instructions.)
The PCI-1760 is operated mostly by sending commands to a set of Outgoing
Mailbox registers, waiting for the command to complete, and reading the
result from the Incoming Mailbox registers. One of these commands is
the "Read the Current Status" command. The number of this command is
0x07 (see the User's Manual for the PCI-1760 at
<https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>.
The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand
to this command number 0x07, but unfortunately it currently expands to
0x03. (Command number 0x03 is not defined in the User's Manual.)
Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it.
This is used by all the PWM subdevice related instructions handled by
`pci1760_pwm_insn_config()` which are probably all broken. The effect
of sending the undefined command number 0x03 is not known.
Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When -Woverride-init is enabled in a build, gcc points out that
qcom_geni_serial_pm_ops contains conflicting initializers:
drivers/tty/serial/qcom_geni_serial.c:1586:20: error: initialized field overwritten [-Werror=override-init]
1586 | .restore = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/tty/serial/qcom_geni_serial.c:1586:20: note: (near initialization for 'qcom_geni_serial_pm_ops.restore')
drivers/tty/serial/qcom_geni_serial.c:1587:17: error: initialized field overwritten [-Werror=override-init]
1587 | .thaw = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Open-code the initializers with the version that was already used,
and use the pm_sleep_ptr() method to deal with unused ones,
in place of the __maybe_unused annotation.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221215165453.1864836-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console
setup") changed uart_set_options to select the correct baudrate
configuration based on the absolute error between requested baudrate and
available standard baudrate settings.
Prior to that commit the baudrate was selected based on which predefined
standard baudrate did not exceed the requested baudrate.
This change of selection logic was never reflected in the atmel serial
driver. Thus the comment left in the atmel serial driver is no longer
accurate.
Additionally the manual rounding up described in that comment and applied
via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses
tty_termios_encode_baud_rate to determine the appropriate baudrate flags
this can cause baudrate selection to fail entirely because
tty_termios_encode_baud_rate will only select a baudrate if relative error
between requested and selected baudrate does not exceed +/-2%.
Fix that by requesting actual, exact baudrate used by the serial.
Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup")
Cc: stable <stable@kernel.org>
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Run the following tests on the qemu platform:
syzkaller:~# modprobe speakup_audptr
input: Speakup as /devices/virtual/input/input4
initialized device: /dev/synth, node (MAJOR 10, MINOR 125)
speakup 3.1.6: initialized
synth name on entry is: (null)
synth probe
spk_ttyio_initialise_ldisc failed because tty_kopen_exclusive returned
failed (errno -16), then remove the module, we will get a null-ptr-defer
problem, as follow:
syzkaller:~# modprobe -r speakup_audptr
releasing synth audptr
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 204 Comm: modprobe Not tainted 6.1.0-rc6-dirty #1
RIP: 0010:mutex_lock+0x14/0x30
Call Trace:
<TASK>
spk_ttyio_release+0x19/0x70 [speakup]
synth_release.part.6+0xac/0xc0 [speakup]
synth_remove+0x56/0x60 [speakup]
__x64_sys_delete_module+0x156/0x250
? fpregs_assert_state_consistent+0x1d/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Modules linked in: speakup_audptr(-) speakup
Dumping ftrace buffer:
in_synth->dev was not initialized during modprobe, so we add check
for in_synth->dev to fix this bug.
Fixes: 4f2a81f3a882 ("speakup: Reference synth from tty and tty from synth")
Cc: stable <stable@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221202060633.217364-1-cuigaosheng1@huawei.com
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: eliminate anonymous module_init & module_exit
net/mlx5: E-switch, Fix switchdev mode after devlink reload
net/mlx5e: Protect global IPsec ASO
net/mlx5e: Remove optimization which prevented update of ESN state
net/mlx5e: Set decap action based on attr for sample
net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
|
|
Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.
Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.
Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230112180417.25595-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In RS485 mode the transmission of a high priority character fails since it
is written to the data register before the transmitter is enabled. Fix this
in pl011_tx_chars() by enabling RS485 transmission before writing the
character.
Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20230108181735.10937-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A local variable sg is used to store scatterlist pointer in
pch_dma_tx_complete(). The for loop doing Tx byte accounting before
dma_unmap_sg() alters sg in its increment statement. Therefore, the
pointer passed into dma_unmap_sg() won't match to the one given to
dma_map_sg().
To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg()
instead of the local variable.
Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.
The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:
Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64
If the RX FIFO depth changes after probe, be sure to resize the buffer.
Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'parent' returned by fwnode_graph_get_port_parent()
with refcount incremented when 'prev' is not NULL, it
needs be put when finish using it.
Because the parent is const, introduce a new variable to
store the returned fwnode, then put it before returning
from fwnode_graph_get_next_endpoint().
Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.
Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dwc3 core support now links against the extcon subsystem,
so it cannot be built-in when extcon is a loadable module:
arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
There was already a Kconfig dependency in the dual-role support,
but this is now needed for the entire dwc3 driver.
It is still possible to build dwc3 without extcon, but this
prevents it from being set to built-in when extcon is a loadable
module.
Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_vma_node_allow() and drm_vma_node_revoke() should be called in
balanced pairs. We call drm_vma_node_allow() once per-file everytime a
user calls mmap_offset, but only call drm_vma_node_revoke once per-file
on each mmap_offset. As the mmap_offset is reused by the client, the
per-file vm_count may remain non-zero and the rbtree leaked.
Call drm_vma_node_allow_once() instead to prevent that memory leak.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Fixes: 786555987207 ("drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain list")
Reported-by: Chuansheng Liu <chuansheng.liu@intel.com>
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-2-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Currently there is no easy way for a drm driver to safely check and allow
drm_vma_offset_node for a drm file just once. Allow drm drivers to call
non-refcounted version of drm_vma_node_allow() so that a driver doesn't
need to keep track of each drm_vma_node_allow() to call subsequent
drm_vma_node_revoke() to prevent memory leak.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-1-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
