| Age | Commit message (Collapse) | Author |
|---|
|
These lines were indented one tab more than they should be. Delete
the stray tabs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/2033b9fa-7b0f-4617-b94e-7b0a51c5c4b1@sabinyo.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In stm32_spi_prepare_rx_dma_mdma_chaining() both rx_dma_desc
and rx_mdma_desc are passed as pointer-to-pointer arguments.
The goal is to pass back to the caller the value returned
by dmaengine_prep_slave_sg(), when it is not NULL.
However, these variables are wrongly handled as simple pointers
during later assignments and checks.
Fix this behaviour by introducing two pointer variables
which can then be treated accordingly.
Fixes: d17dd2f1d8a1 ("spi: stm32: use STM32 DMA with STM32 MDMA to enhance DDR use")
Addresses-Coverity-ID: 1644715 ("Null pointer dereferences (REVERSE_INULL)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Reviewed-by: Clement LE GOFFIC <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250630081253.17294-1-antonio@mandelbit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a test to check whether the sram_pool is NULL before freeing it.
Fixes: d17dd2f1d8a1 ("spi: stm32: use STM32 DMA with STM32 MDMA to enhance DDR use")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250630-spi-fix-v2-1-4680939e2a3e@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor the pci1xxxx SPI driver to allow overlapping DMA read and
write operations across SPI transfers. This improves throughput and
reduces idle time between SPI transactions.
Transfer sequence:
- Start with a DMA read to load TX data from host to device buffer.
- After DMA read completes, trigger the SPI transfer.
- On SPI completion:
- Start DMA write to copy received data from RX buffer to host.
- Start the next DMA read to prepare TX data for the following transfer.
- Begin the next SPI transfer after both DMA write and read complete.
To implement this sequence, the following changes were made:
- Added dma_completion_count to track and synchronize DMA completions.
- Split DMA setup into separate functions for TX (read) and RX (write).
- Introduced separate spinlocks for safe access to RD and WR DMA registers.
This new flow enables efficient pipelining by overlapping data
preparation and completion stages, leading to better SPI transfer
performance and utilization of DMA engines.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250630073233.7356-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bence Csókás <csokas.bence@prolan.hu>:
The probe function of the atmel-quadspi driver got quite convoluted,
especially since the addition of SAMA7G5 support, that was forward-ported
from an older vendor kernel. To alleivate this - and similar problems in
the future - an effort was made to migrate as many functions as possible,
to their devm_ managed counterparts. Patch 1/2 adds the new
`devm_dma_request_chan()` function. Patch 2/2 then uses this APIs to
simplify the probe() function.
|
|
Leave releasing of DMA channels up to the devm facilities. This way we can
eliminate the rest of the "goto ladder".
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250610082256.400492-3-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Expand the arsenal of devm functions for DMA devices, this time for
requesting channels.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20250610082256.400492-2-csokas.bence@prolan.hu
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Merge series from Clément Le Goffic <clement.legoffic@foss.st.com>:
This series aims to improve the STM32 SPI driver in different areas.
It adds SPI_READY mode, fixes an issue raised by a kernel bot,
add the ability to use DMA-MDMA chaining for RX and deprecate an ST bindings
vendor property.
|
|
The `st,spi-midi-ns` property, which was used to set a nanosecond delay
between transferred words, is now deprecated.
This functionality is now supported by the SPI framework through the
`spi_transfer` struct's `word_delay` variable.
Therefore, the private `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of the generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-5-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The STM32 DMA doesn't have the ability to generate convenient burst
transfer on the DDR, ensuring the best load of the AXI & DDR.
To avoid this bad load of the AXI & DDR, STM32 MDMA can be used to transfer
data to the DDR, being triggered by STM32 DMA channel transfer
completion.
An SRAM buffer is used between DMA and MDMA. So the MDMA always does
MEM_TO_MEM transfers (from/to SRAM to/from DDR), and the DMA uses SRAM
instead of DDR with DEV_TO_MEM transfers.
SPI RX DMA (DEV_TO_MEM) becomes:
SPI RX FIFO ==DMA==> SRAM ==MDMA==> DDR
In RX (DEV_TO_MEM), EOT interrupt is used to pause the DMA channel (which
will raise a transfer complete) to trigger the MDMA to flush the SRAM (when
transfer length is not aligned on SRAM period).
TX remains on the former implementation.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-4-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/
Fixes: fee681646fc8 ("spi: stm32: disable device mode with st,stm32f4-spi compatible")
Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The spi ready functionality is supported by our peripheral in host and
target modes on STM32MP2x SoCs.
Update our spi controller driver to allow devices to use this
functionality.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-1-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for dedicated DMA interrupt vectors for each SPI hardware
instance in the pci1xxxx driver. This improves scalability and interrupt
handling for systems using multiple SPI instances with DMA.
Introduce a constant `NUM_VEC_PER_INST` to define the number of IRQ
vectors per instance (main, DMA write, DMA read). Update the
`pci1xxxx_spi_internal` structure to use an IRQ array.
Refactor IRQ allocation and DMA initialization logic:
- Assign separate IRQ vectors for DMA read and write interrupts.
- Split the original DMA ISR into two handlers:
`pci1xxxx_spi_isr_dma_rd` and `pci1xxxx_spi_isr_dma_wr`.
- Configure IMWR registers per instance using cached MSI data.
- Move DMA register configuration into a new helper function,
`pci1xxxx_spi_dma_config()`.
Invoke the DMA initialization after all instances are configured to
ensure correct IRQ vector mapping.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250624033028.74389-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Conor Dooley <conor@kernel.org>:
This is a v2 of a patchset I sent about this time last year, adding the
regular transfer_one_message op to the microchip-core-qspi driver. In that
v1 Mark expressed his dislike for that op, so v2 is using
prepare/unprepare/transfer_one instead. The unprepare implementation still
contains the 750 us delay that the driver had back in v1. I've heard a
suggestion internally as to why this is needed, but it was unsubstantiated,
so I still have no justification for it. I held off on sending a v2 because
of a lack of explanation for the delay, but I don't wanna hold off forever
for something I might never understand.
|
|
The driver for CoreQSPI only supports memory operations at present, so
add support for regular transfers so that the SD card slot and ADC on
the BeagleV Fire can be used.
Signed-off-by: Cyril Jean <cyril.jean@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-splice-shelter-310771564886@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"word" is unused in mchp_coreqspi_write_op(), so delete it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-starry-excusably-25e6be957d9d@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The controller's minimum possible bus clock is 1/30 the rate of the
input clock. Naively set the minimum bus clock speed the controller
is capable of during probe, assuming that the rate will never reduce
further.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-drained-widen-ac311bd5f172@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix missing prototypes warnings
- Properly initialize work context when allocating it
- Remove a method tracking when managed interrupts are suspended during
hotplug, in favor of the code using a IRQ disable depth tracking now,
and have interrupts get properly enabled again on restore
- Make sure multiple CPUs getting hotplugged don't cause wrong tracking
of the managed IRQ disable depth
* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ath79-misc: Fix missing prototypes warnings
genirq/irq_sim: Initialize work context pointers properly
genirq/cpuhotplug: Restore affinity even for suspended IRQ
genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- amd64: Correct the number of memory controllers on some AMD Zen
clients
- igen6: Handle firmware-disabled memory controllers properly
* tag 'edac_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Fix NULL pointer dereference
EDAC/amd64: Correct number of UMCs for family 19h models 70h-7fh
|
|
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a crash in ACPICA while attempting to evaluate a control method
that expects more arguments than are being passed to it, which was
exposed by a defective firmware update from a prominent OEM on
multiple systems (Rafael Wysocki)"
* tag 'acpi-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Refuse to evaluate a method if arguments are missing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Set up runtime PM even for devices that lack a PM Capability as we
did before 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when
initializing"), which broke resume in some VFIO scenarios (Mario
Limonciello)
- Ignore pciehp Presence Detect Changed events caused by DPC, even if
they occur after a Data Link Layer State Changed event, to fix a VFIO
GPU passthrough regression in v6.13 (Lukas Wunner)
* tag 'pci-v6.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: pciehp: Ignore belated Presence Detect Changed caused by DPC
PCI/PM: Set up runtime PM even for devices without PCI PM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The main fix that really needs to get in is the revert of the patch
adding the new mtd_master class, because it entirely fails the
partitioning if a specific Kconfig option is set. We need to think how
to handle that differently, so let's revert it as we need to get back
to the pen and paper situation again.
Otherwise the definition of some Winbond SPI NAND chips are receiving
some fixes (geometry and maximum frequency, mostly).
And finally a small memory leak gets also fixed"
* tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: fix memory leak of ECC engine conf
mtd: spinand: winbond: Prevent unsupported frequencies on dual/quad I/O variants
mtd: spinand: winbond: Increase maximum frequency on an octal operation
mtd: spinand: winbond: Fix W35N number of planes/LUN
Revert "mtd: core: always create master device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small and obvious driver fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: elx: efct: Fix memory leak in efct_hw_parse_filter()
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
|
|
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- correct the ACPI GPIO access mode in gpio-loongson-64bit
- only obtain the interrupt for a single instance of the chip
controlled by gpio-mlxbf3
- fix an invalid value return from probe() in gpio-pca953x
- add missing MODULE_DEVICE_TABLE() to gpio-spacemit
- update the HiSilicon GPIO driver maintainer entry
* tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: only get IRQ for device instance 0
gpio: pca953x: fix wrong error probe return value
gpio: spacemit: Add missing MODULE_DEVICE_TABLE
gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access mode
MAINTAINERS: Update HiSilicon GPIO driver maintainer
|
|
Pull block fixes from Jens Axboe:
- Two fixes for aoe which fixes issues dating back to when this driver
was converted to blk-mq
- Fix for ublk, checking for valid queue depth and count values before
setting up a device
* tag 'block-6.16-20250619' of git://git.kernel.dk/linux:
ublk: santizize the arguments from userspace when adding a device
aoe: defer rexmit timer downdev work to workqueue
aoe: clean device rq_list in aoedev_downdev()
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in fixes for rc3, msm and amdgpu leading the way,
with i915/xe/nouveau with a few each and then some scattered misc
bits, nothing looks too crazy:
msm:
- Display:
- Fixed DP output on SDM845
- Fixed 10nm DSI PLL init
- GPU:
- SUBMIT ioctl error path leak fixes
- drm half of stall-on-fault fixes
- a7xx: Missing CP_RESET_CONTEXT_STATE
- Skip GPU component bind if GPU is not in the device table
i915:
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
xe:
- A workaround update
- Fix memset on iomem
- Fix early wedge on GuC Load failure
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
nouveau:
- update docs reference
- fix backlight name buffer size
- fix UAF in r535 gsp rpc msg
- fix undefined shift
mgag200:
- drop export header
ast:
- drop export header
malidp:
- drop informational error
ssd130x:
- fix clear columns
etnaviv:
- scheduler locking fix
v3d:
- null pointer crash fix"
* tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/xe: Fix early wedge on GuC load failure
drm/xe: Fix memset on iomem
drm/xe/bmg: Update Wa_16023588340
drm/amdgpu/sdma5.2: init engine reset mutex
drm/amdkfd: Fix race in GWS queue scheduling
drm/amdgpu/sdma5: init engine reset mutex
drm/amdgpu: switch job hw_fence to amdgpu_fence
drm/amdgpu: Fix SDMA UTC_L1 handling during start/stop sequences
drm/amdgpu: Release reset locks during failures
drm/amd/display: Check dce_hwseq before dereferencing it
drm/amdgpu: VCN v5_0_1 to prevent FW checking RB during DPG pause
drm/amdgpu: Use logical instance ID for SDMA v4_4_2 queue operations
drm/amdgpu: Fix SDMA engine reset with logical instance ID
drm/amdgpu: add kicker fws loading for gfx11/smu13/psp13
drm/amdgpu: Add kicker device detection
drm/amd/display: Export full brightness range to userspace
drm/amd/display: Only read ACPI backlight caps once
drm/amd/display: Fix RMCM programming seq errors
drm/amd/display: Fix mpv playback corruption on weston
drm/amd/display: Add more checks for DSC / HUBP ONO guarantees
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix here from Thierry, fixing crashes caused by attempting to do
cache sync operations on uncached memory on Tegra platforms"
* tag 'spi-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra210-qspi: Remove cache operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One patch here from Heiko which fixes stability issues on some
Rockchip platforms by implementing soft start support and providing
startup time information for their regulators"
* tag 'regulator-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fan53555: add enable_time support and soft-start times
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- A workaround update (Vinay)
- Fix memset on iomem (Lucas)
- Fix early wedge on GuC Load failure (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aFQ03kNzhbiNK7gW@fedora
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc3:
- vivante scheduler fix.
- v3d null pointer crash fix.
- fix backlight, booting GSP-RM, and potential integer shift overflow in nouveau.
- fix compiler warnings about unused linux/export.h
- fix malidp unknown modifier spam.
- fix for ssd130x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/d44bab7b-01f8-45a8-a7f4-5d3d563d2f9d@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
|
|
Memory allocated for the ECC engine conf is not released during spinand
cleanup. Below kmemleak trace is seen for this memory leak:
unreferenced object 0xffffff80064f00e0 (size 8):
comm "swapper/0", pid 1, jiffies 4294937458
hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace (crc 0):
kmemleak_alloc+0x30/0x40
__kmalloc_cache_noprof+0x208/0x3c0
spinand_ondie_ecc_init_ctx+0x114/0x200
nand_ecc_init_ctx+0x70/0xa8
nanddev_ecc_engine_init+0xec/0x27c
spinand_probe+0xa2c/0x1620
spi_mem_probe+0x130/0x21c
spi_probe+0xf0/0x170
really_probe+0x17c/0x6e8
__driver_probe_device+0x17c/0x21c
driver_probe_device+0x58/0x180
__device_attach_driver+0x15c/0x1f8
bus_for_each_drv+0xec/0x150
__device_attach+0x188/0x24c
device_initial_probe+0x10/0x20
bus_probe_device+0x11c/0x160
Fix the leak by calling nanddev_ecc_engine_cleanup() inside
spinand_cleanup().
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc4282: Avoid repeated register write operation
- occ: Fix unaligned accesses, and rework attribute registration to
reduce stack usage
- ftsteutates: Fix TOCTOU race
* tag 'hwmon-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc4282) avoid repeated register write
hwmon: (occ) fix unaligned accesses
hwmon: (occ) Rework attribute registration for stack usage
hwmon: (ftsteutates) Fix TOCTOU race in fts_read()
|
|
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).
Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.
Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()
Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the GuC fails to load we declare the device wedged. However, the
very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done
before the GT1 GuC objects are initialized, so things go bad when the
wedge code attempts to cleanup GT1. To fix this, check the initialization
status in the functions called during wedge.
Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: stable@vger.kernel.org # v6.12+: 1e1981b16bb1: drm/xe: Fix taking invalid lock on wedge
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0b93b7dcd9eb888a6ac7546560877705d4ad61bf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
It should rather use xe_map_memset() as the BO is created with
XE_BO_FLAG_VRAM_IF_DGFX in xe_guc_pc_init().
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612-vmap-vaddr-v1-1-26238ed443eb@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 21cf47d89fba353b2d5915ba4718040c4cb955d3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
This allows for additional L2 caching modes.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-2-94ba5dcc1e30@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6ab42fa03d4c88a0ddf5e56e62794853b198e7bf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Sanity check the values for queue depth and number of queues
we get from userspace when adding a device.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Fixes: 62fe99cef94a ("ublk: add read()/write() support for ublk char device")
Link: https://lore.kernel.org/r/20250619021031.181340-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace.
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-06-18:
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250618203115.1533451-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFJfykDpUwtmpilE@jlahtine-mobl
|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
