| Age | Commit message (Collapse) | Author |
|---|
|
On i.mx8mq, there are two sdma instances, and the common dma framework
will get a channel dynamically from any available sdma instance whether
it's the first sdma device or the second sdma device. Some IPs like
SAI only work with sdma2 not sdma1. To make sure the sdma channel is from
the correct sdma device, use the node pointer to match.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On i.mx8 mscale B0 chip, AHB/SDMA clock ratio 2:1 can't be supportted,
since SDMA clock ratio has to be increased to 250Mhz, AHB can't reach
to 500Mhz, so use 1:1 instead.
Based on NXP commit MLK-16841-1 by Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Topaz family should have different phylink_validate method from the
Peridot, since on Topaz the port supporting 2500BaseX mode is port 5,
not 9 and 10.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 787799a9d555 sets the SERDES interfaces of 6390 and 6390X to
1000BaseX, but this is only needed on 6390X, since there are SERDES
interfaces which can be used on lower ports on 6390.
This commit fixes this by returning to previous behaviour on 6390.
(Previous behaviour means that CMODE is not set at all if requested mode
is NA).
This is needed on Turris MOX, where the 88e6190 is connected to CPU in
2500BaseX mode.
Fixes: 787799a9d555 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch starts to take advantage of the `dmatest_data` struct by moving
the common allocation & free-ing bits into functions.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is just a cosmetic change, since this variable gets used quite a bit
inside the dmatest_func() routine.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This change wraps the data for the source & destination buffers into a
`struct dmatest_data`. The rename patterns are:
* src_cnt -> src->cnt
* dst_cnt -> dst->cnt
* src_off -> src->off
* dst_off -> dst->off
* thread->srcs -> src->aligned
* thread->usrcs -> src->raw
* thread->dsts -> dst->aligned
* thread->udsts -> dst->raw
The intent is to make a function that moves duplicate parts of the code
into common alloc & free functions, which will unclutter the
`dmatest_func()` function.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This register read is a leftover of a previous read/modify/write. We now use
regmap_update_bits(), so we don't need it anymore.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The MUX clock of dpi1_sel should select the closet clock for itself.
We could add this flag to enable this function of MUX in CCF.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MUX_GATE_FLAGS_2 for the clock which needs to set two falgs.
Such as some mux need to set the flags of "CLK_MUX_ROUND_CLOSEST".
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD
was recently added and it's the core clock with the highest
index.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds device tree probing for the AD7418 hwmon sensor.
When device tree is not enabled, stub functions will kick
in.
Tested on the Gateway Cambria GW2358-4.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[groeck: Added missing {} to terminate ad7418_dt_ids]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
A test started warning on a string truncation. This led to an unfortunate
realization that we are likely not accounting for the stats length
correctly before this patch, so fix the issue by putting "port." in front
of all the PF stats, instead of magically prepending it at runtime.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Ethtool reported pause params based on the currently negotiated
link settings instead of current PHY config. User was not able
to turn off pause params because ethtool was incorrectly reporting
parameters as off when link was down even though PHY was configured
to support pause frames. Now pause params are taken from PHY config
instead of link status.
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When the PF driver sets up the VF MSI-X vector allocation, it needs to
use the hardware absolute vector ID, not the per-PF vector ID. Without
this change we see (apparent) TX hangs when using VFs on multiple PFs.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Check for a leaf node presence for a given VSI. This check is required
before removing a VSI since VSIs can't be removed with enabled queues
(with leaf nodes) from the FW scheduler tree unless its a reset.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Set the flush Tx pipe flag instead of getting an EAGAIN error when FW
times out in processing the disable Tx queue command.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
On older devices like X710 and X722, the VF's ARQLEN register is cleared
on reset, so the VF driver uses that register to detect an unannounced
reset. Unfortunately, on devices controlled by ice, this register is NOT
cleared on reset. This causes the VF to miss resets, and even on
properly-announced resets, the VF driver complains that it didn't see
the reset.
To fix this, we'll do it in software. When we handle a VF reset (whether
triggered by software or VFLR), clear this register after the HW reset
is complete.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Don't send a link message to the VFs unless link actually changes state.
This avoids a small timing hole in some VF drivers that can cause an
apparent TX hang if they receive a link status message at the wrong time.
Although we have fixed the timing hole in the current VF driver, there
are still lots of drivers in the field that have this timing hole. Let's
not fall into it if we can avoid it.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In ice_vsi_release we are always assigning a value to the local VF
variable. Change this to only be assigned if the VSI is a VF VSI.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When compiling and analyzing the driver on newer kernels, a static
analyzer warns about the following "numeric overflow" issues:
"The result of expression: 'budget-1' generates 4-byte type while casting
to a bigger size of 8-byte".
"The result of expression: '*words-words_read' generates 4-byte type
while casting to a bigger size of 8-byte".
Fix them both.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently if the kernel has the intel_iommu=on parameter set, on some
platforms removing the driver causes a system reboot. In initialization
we associate the control queue interrupts with the pf->hw_oicr_idx and
enable the interrupts by setting the CAUSE_ENA bit. The problem comes
on teardown because we are not clearing the CAUSE_ENA bit for the
control queues, but the vector at pf->hw_oicr_idx (miscellaneous
interrupt vector) gets disabled.
Fix this by clearing the CAUSE_ENA bit in the appropriate control queue
registers on when freeing the miscellaneous interrupt vector. Also,
move the call to ice_free_irq_msix_misc() to after ice_deinit_sw() in
ice_remove() because ice_deinit_sw() makes an AQ call, but
ice_free_irq_msix_misc() disables the miscellaneous vector and it's
associated interrupts.
Also, create two small helper functions to enable and disable the
control queue interrupts respectively.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When adding multiple VLANs to the same VSI, the ice_add_vlan code will
share the VSI list, so as not to create multiple unnecessary VSI lists.
Consider the following flow
ice_add_vlan(hw, <VSI 0 VID 7, VSI 0 VID 8, VSI 0 VID 9>)
Where we add three VLAN filters for VIDs 7, 8, and 9, all for VSI 0.
The ice_add_vlan will create a single vsi_list and share it among all
the filters.
Later, if we try to remove a VLAN,
ice_remove_vlan(hw, <VSI 0 VID 7>)
Then the removal code will update the vsi_list and remove VSI 0 from it.
But, since the vsi_list is shared, this breaks the list for the other
users who reference it. We actually even free the VSI list memory, and
may result in segmentation faults.
This is due to the way that VLAN rule share VSI lists with reference
counts, and is caused because we call ice_rem_update_vsi_list even when
the ref_cnt is greater than one.
To fix this, handle the case where ref_cnt is greater than one
separately. In this case, we need to remove the associated rule without
modifying the vsi_list, since it is currently being referenced by
another rule. Instead, we just need to decrement the VSI list ref_cnt.
The case for handling sharing of VSI lists with multiple VSIs is not
currently supported by this code. No such rules will be created today,
and this code will require changes if/when such code is added.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
struct ice_vsi_ctx has gotten large enough that function local declarations
of it on the stack are causing stack hogs. Fix that by allocating the
structs on heap. Cleanup some formatting issues in the code around these
changes and fix incorrect data type uses of returned functions in a couple
places.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
With sizeof(), it is preferable to use the variable of type <type> instead
of sizeof(<type>).
There are multiple places where a temporary variable is used to hold a
'size' value which is then used for a subsequent alloc/memset. Get rid
of the temporary variable by calculating size as part of the alloc/memset
statement.
Also remove unnecessary type-cast.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
VSI supported nodes are calculated in order to add the VSI parent or
intermediate nodes to the scheduler tree. If one of the node in below
layers (from VSI layer) has space to add the new VSI or intermediate node
above that layer then it's not required to continue the calculation further
for below layers.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently ICE_MAX_MTU subtracts only ETH_HLEN from max frame size and
adds ETH_FCS_LEN and VLAN_HLEN, which is not what was intended.
The ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN expression should be surrounded
with parentheses.
Wrap mentioned expression and take into account VLAN double tagging.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Commit 87b0984ebfab ("net: Add extack argument to ndo_fdb_add()") in
net-next added an extended parameter to the .ndo_fdb_add op and changed
ice_fdb_add() accordingly. Update the function header and add the
__always_unused attribute to the new parameter to avoid -Wunused-parameter
warnings.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
I have encountered an interrupt storm during the eMMC chip probing (and
the chip finally didn't get detected). It turned out that U-Boot left
the DMAC interrupts enabled while the Linux driver didn't use those.
The SDHI driver's interrupt handler somehow assumes that, even if an
SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think
that if none of the enabled interrupts happened and got handled, we
should return IRQ_NONE -- that way the kernel IRQ code recoginizes
a spurious interrupt and masks it off pretty quickly...
Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The only user of mmc_align_data_size() is sdio_align_size(), which is
called from SDIO func drivers to let them distinguish, how to optimally
allocate data buffers.
Let's move mmc_align_data_size() close to the SDIO code as to make it
static, rename it to _sdio_align_size() and simplify its definition, all
with the purpose of clarifying that this is SDIO specific.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
|
|
Mei hdcp driver is designed as component slave for the I915 component
master.
v2: Rebased.
v3:
Notifier chain is adopted for cldev state update [Tomas]
v4:
Made static dummy functions as inline in mei_hdcp.h
API for polling client device status
IS_ENABLED used in header, for config status for mei_hdcp.
v5:
Replacing the notifier with component framework. [Daniel]
v6:
Rebased on the I915 comp master redesign.
v7:
mei_hdcp_component_registered is made static [Uma]
Need for global static variable mei_cldev is removed.
v8:
master comp is added to be matched with i915 subcomponent [daniel]
v9:
only comp_master is set and retrieved as driver_data [Daniel]
Reviewed-by Daniel.
v10:
small corrections at probe [Tomas]
v11:
bind and unbind logs are made as debug logs [Tomas]
cldev_enable failure is handled [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-16-git-send-email-ramalingam.c@intel.com
|
|
Request the ME to terminate the HDCP2.2 session for a port.
On Success, ME FW will mark the intel port as Deauthenticated and
terminate the wired HDCP2.2 Tx session started due to the cmd
WIRED_INITIATE_HDCP2_SESSION.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5:
Extra line is removed.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition.[Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-15-git-send-email-ramalingam.c@intel.com
|
|
Request to ME to configure a port as authenticated.
On Success, ME FW will mark the port as authenticated and provides
HDCP cipher with the encryption keys.
Enabling the Authentication can be requested once all stages of
HDCP2.2 authentication is completed by interacting with ME FW.
Only after this stage, driver can enable the HDCP encryption for
the port, through HW registers.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-14-git-send-email-ramalingam.c@intel.com
|
|
Request to ME to verify the M_Prime received from the HDCP sink.
ME FW will calculate the M and compare with M_prime received
as part of RepeaterAuth_Stream_Ready, which is HDCP2.2 protocol msg.
On successful completion of this stage, downstream propagation of
the stream management info is completed.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
endianness conversion func is moved to drm_hdcp.h [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
drm_hdcp2_u32_to_seq_num() is used for u32 to seq_num.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
%s/__swab16/cpu_to_be16 [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-13-git-send-email-ramalingam.c@intel.com
|
|
Request ME to verify the downstream topology information received.
ME FW will validate the Repeaters receiver id list and
downstream topology.
On Success ME FW will provide the Least Significant
128bits of VPrime, which forms the repeater ack.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5: Rebased.
v6: Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-12-git-send-email-ramalingam.c@intel.com
|
|
Request to ME to prepare the encrypted session key.
On Success, ME provides Encrypted session key. Function populates
the HDCP2.2 authentication msg SKE_Send_Eks.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-11-git-send-email-ramalingam.c@intel.com
|
|
Request to ME to verify the LPrime received from HDCP sink.
On Success, ME FW will verify the received Lprime by calculating and
comparing with L.
This represents the completion of Locality Check.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-10-git-send-email-ramalingam.c@intel.com
|
|
Requests ME to start the second stage of HDCP2.2 authentication,
called Locality Check.
On Success, ME FW will provide LC_Init message to send to hdcp sink.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-9-git-send-email-ramalingam.c@intel.com
|
|
Provides Pairing info to ME to store.
Pairing is a process to fast track the subsequent authentication
with the same HDCP sink.
On Success, received HDCP pairing info is stored in non-volatile
memory of ME.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-8-git-send-email-ramalingam.c@intel.com
|
|
Requests for the verification of AKE_Send_H_prime.
ME will calculate the H and comparing it with received H_Prime.
The result will be returned as status.
Here AKE_Send_H_prime is a HDCP2.2 Authentication msg.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Styles and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-7-git-send-email-ramalingam.c@intel.com
|
|
Requests for verification for receiver certification and also the
preparation for next AKE auth message with km.
On Success ME FW validate the HDCP2.2 receivers certificate and do the
revocation check on the receiver ID. AKE_Stored_Km will be prepared if
the receiver is already paired, else AKE_No_Stored_Km will be prepared.
Here AKE_Stored_Km and AKE_No_Stored_Km are HDCP2.2 protocol msgs.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd is used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
Fixed the conversion of u8 to bool [Tomas]
K-Doc fix [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-6-git-send-email-ramalingam.c@intel.com
|
|
Request ME FW to start the HDCP2.2 session for an intel port.
Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends
to ME FW.
On Success, ME FW will start a HDCP2.2 session for the port and
provides the content for HDCP2.2 AKE_Init message.
v2: Rebased.
v3:
cldev is add as a separate parameter [Tomas]
Redundant comment and typecast are removed [Tomas]
v4:
%zd is used for size [Alexander]
%s/return -1/return -EIO [Alexander]
Spellings in commit msg is fixed [Uma]
v5: Rebased.
v6:
Collected the rb-ed by.
Realigning the patches in the series.
v7:
Adjust to the new mei interface.
Fix for kdoc.
v8:
K-Doc Addition.
memcpy for const length.
v9:
s/mei_hdcp_ddi/mei_fw_ddi
s/i915_port/mei_i915_port [Tomas]
renamed func as mei_hdcp_* [Tomas]
Instead of macro, inline func for ddi index is used. [Tomas]
v10:
Switch case for the coversion between i915_port to mei_ddi [Tomas]
Kernel doc fix.
v11:
mei_hdcp_ops is defined as const. [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-5-git-send-email-ramalingam.c@intel.com
|
|
Defines the HDCP specific ME FW interfaces such as Request CMDs,
payload structure for CMDs and their response status codes.
This patch defines payload size(Excluding the Header)for each WIRED
HDCP2.2 CMDs.
v2: Rebased.
v3:
Extra comments are removed.
v4:
%s/\/\*\*/\/\*
v5:
Extra lines are removed.
v6:
Remove redundant text from the License header
%s/LPRIME_HALF/V_PRIME_HALF
%s/uintxx_t/uxx
v7:
Extra taps removed.
v8:
k is defined as __be16 [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-4-git-send-email-ramalingam.c@intel.com
|
|
ME FW contributes a vital role in HDCP2.2 authentication.
HDCP2.2 driver needs to communicate to ME FW for each step of the
HDCP2.2 authentication.
ME FW prepare and HDCP2.2 authentication parameters and encrypt them
as per spec. With such parameter Driver prepares HDCP2.2 auth messages
and communicate with HDCP2.2 sink.
Similarly HDCP2.2 sink's response is shared with ME FW for decrypt and
verification.
Once All the steps of HDCP2.2 authentications are complete on driver's
request ME FW will configure the port as authenticated and supply the
HDCP keys to the Gen HW for encryption.
Only after this stage HDCP2.2 driver can start the HDCP2.2 encryption
for a port.
ME FW is interfaced to kernel through MEI Bus Driver. To obtain the
HDCP2.2 services from the ME FW through MEI Bus driver MEI Client
Driver is developed.
v2:
hdcp files are moved to drivers/misc/mei/hdcp/ [Tomas]
v3:
Squashed the Kbuild support [Tomas]
UUID renamed and Module License is modified [Tomas]
drv_data is set to null at remove [Tomas]
v4:
Module name is changed to "MEI HDCP"
I915 Selects the MEI_HDCP
v5:
Remove redundant text from the License header
Fix malformed licence
Removed the drv_data resetting.
v6:
K-Doc addition. [Tomas]
v7:
%s/UUID_LE/GUID_INIT [Tomas]
GPL Ver is 2.0 than 2.0+ [Tomas]
v8:
Added more info into Kconfig addition [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-3-git-send-email-ramalingam.c@intel.com
|
|
Whitelist HDCP client for in kernel drm use
v2:
Rebased.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-2-git-send-email-ramalingam.c@intel.com
|
|
When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).
The call tree looks something like this:
mmc_spi_probe
mmc_add_host
mmc_start_host
_mmc_detect_change
mmc_schedule_delayed_work(&host->detect, 0)
mmc_rescan
host->bus_ops->detect(host)
mmc_detect
_mmc_detect_card_removed
host->ops->get_cd(host)
mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
mmc_gpiod_request_cd
ctx->cd_gpio = desc
To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
MMC OF parsing functions, which parses various host DT properties, should
stay close to each other. Therefore, let's move mmc_of_parse_voltage()
close to mmc_of_parse() into host.c.
Additionally, there is no reason to build the code only when CONFIG_OF is
set, as there should be stub functions for the OF helpers that is being
used, so let's drop this condition as well.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The only left user of mmc_regulator_get_ocrmask() is the mmc core itself.
Therefore, let's drop the export and turn it into static.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The mmc regulator helper functions, are placed in the extensive core.c
file. In a step towards trying to create a better structure of files,
avoiding too many lines of code per file, let's move these helpers to a new
file, regulator.c.
Moreover, this within this context it makes sense to also drop the export
of mmc_vddrange_to_ocrmask(), but instead let's make it internal to the mmc
core.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Let's drop the open-coding of the parsing of the "voltage-ranges" DT
property and convert to use the common mmc_of_parse_voltage() API instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
