| Age | Commit message (Collapse) | Author |
|---|
|
Move readl_relaxed of I2C_ISR register at beginning of event isr
so that it done once for both master & slave handling.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Avoid usage of __func__ when reporting an error message
since dev_err/dev_dbg are already providing enough details
to identify the source of the message.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The irq handling is currently split between the irq handler
and the threaded irq handler. Some of the handling (such as
dma related stuffs) done within the irq handler might sleep or
take some time leading to issues if the kernel is built with
realtime constraints. In order to fix that, perform an overall
rework to perform most of the job within the threaded handler
and only keep fifo access in the non threaded handler.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Convert error handling upon calls of devm_request_irq functions during
the probe of the driver.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On the Dell XPS 15 7590/0VYV0G, BIOS 1.24.0 09/11/2023, Linux prints the
warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 2 at
address 0x29.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
lis3lv02d 0x29
$ dmesg | tail -5
[ 549.522876] lis3lv02d_i2c 2-0029: supply Vdd not found, using dummy regulator
[ 549.522904] lis3lv02d_i2c 2-0029: supply Vdd_IO not found, using dummy regulator
[ 549.542486] lis3lv02d: 8 bits 3DC sensor found
[ 549.630022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input35
[ 549.630586] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29
So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.
[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On the Dell Precision 3540/0M14W7, BIOS 1.7.4 05/12/2020, Linux prints
the warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
With the help of Wolfram Sang, the test to probe it on I2C bus 6 at address
0x29 was successful.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-6/new_device
[ 2110.787000] i2c i2c-6: new_device: Instantiated device lis3lv02d at 0x29
[ 2110.791932] lis3lv02d_i2c 6-0029: supply Vdd not found, using dummy regulator
[ 2110.791981] lis3lv02d_i2c 6-0029: supply Vdd_IO not found, using dummy regulator
[ 2110.809233] lis3lv02d: 8 bits 3DC sensor found
[ 2110.900668] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23
So, the device has that accelerometer. Add the I2C address to the
mapping list.
Link: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
These Settings for the same register, REG_CR,
can be put together to reduce code redundancy.
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Use more appropriate parameter passing to reduce the amount of code
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The frequency setting mode is adjusted to reduce the code redundancy,
and it is also convenient to share with zhaoxin
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Put the handling of interrupt events in a function class
to reduce code redundancy.
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Put wmt_i2c_wait_bus_not_busy() in a more appropriate place
to reduce code redundancy
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Legacy class-based device auto-detection shouldn't be used in new code.
Therefore remove support in i2c-mux-reg as long as we don't have a
user of this feature yet.
Link: https://lore.kernel.org/linux-i2c/a22978a4-88e4-46f4-b71c-032b22321599@gmail.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the i2c_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Note, the sound/soc/rockchip/rk3399_gru_sound.c also needed tweaking as
it decided to save off a pointer to a bus type for internal stuff, and
it was using the i2c_bus_type as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This driver does not depend on CONFIG_OF so using of_match_ptr() makes
sense to reduce the size a bit.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
sparse reports an error on some data that gets converted from be32.
That's because that data is typed u32 instead of __be32.
The type is correct, the be32_to_cpu() conversion is not.
Remove the conversion.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312042210.QL4DA8Av-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-By: Jochen Friedrich <jochen@scram.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Both i2c_generic_scl_recovery() and the debug output indicate that SDA is
purely optional for bus recovery. But devm_gpiod_get() never returns NULL
making it mandatory. Fix this by calling devm_gpiod_get_optional instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
I originally restricted i2c_register_spd() to only support systems
with up to 4 memory slots, so that we can experiment with it on
a limited numbers of systems. It's been more than 3 years and it
seems to work just fine, so the time has come to lift this arbitrary
limitation.
The maximum number of memory slots which can be connected to a single
I2C segment is 8, so support that many SPD EEPROMs. Any system with
more than 8 memory slots would have either multiple SMBus channels
or SMBus multiplexing, so it would need dedicated care. We'll get to
that later as needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.
This patch fixes i2c2 bus on rv1126 SoCs.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add support for atomic transfers using polling mode with interrupts
intentionally disabled to get rid of the following warning introduced by
commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic
transfers") during system reboot and power-off:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1518 at drivers/i2c/i2c-core.h:40 i2c_transfer+0xe8/0xf4
No atomic I2C transfer handler for 'i2c-0'
...
---[ end trace 0000000000000000 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
To properly handle ACK on the bus when transferring more than one
message in polling mode, move the polling handling loop from
s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way
i2c_s3c_irq_nextbyte() is always executed till the end, properly
acknowledging the IRQ bits and no recursive calls to
i2c_s3c_irq_nextbyte() are made.
While touching this, also fix finishing transfers in polling mode by
using common code path and always waiting for the bus to become idle
and disabled.
Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.
Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
To support FM+, we mainly need to turn the SMD constant into a parameter
and set it accordingly. That also means we can finally fix SMD to our
needs instead of bailing out. A sanity check for SMD then becomes a
sanity check for 'x == 0'. After all that, activating the enable bit for
FM+ is all we need to do. Tested with a Renesas Falcon board using R-Car
V3U.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
So far, we treated Gen4 as Gen3. But we are soon adding FM+ as a Gen4
specific feature, so prepare the code for the new devtype.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com> # for SCX
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
I2C_CLASS_SPD was used to expose the EEPROM content to user space,
via the legacy eeprom driver. Now that this driver has been removed,
we can remove I2C_CLASS_SPD support. at24 driver with explicit
instantiation should be used instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.8-rc1. It's not
really that big this release cycle, not much happened except for 186
patches of coding style cleanups. The majority was in the rtl8192e
driver, but there are other smaller changes in a few other staging
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (186 commits)
Staging: rtl8192e: Rename variable OpMode
Staging: rtl8192e: Rename variable bIsAggregateFrame
Staging: rtl8192e: Rename function rtllib_EnableNetMonitorMode()
Staging: rtl8192e: Rename variable NumRxOkInPeriod
Staging: rtl8192e: Rename variable NumTxOkInPeriod
Staging: rtl8192e: Rename variable bUsed
staging: vme_user: print more detailed infomation when an error occurs
Staging: rtl8192e: Rename function rtllib_DisableNetMonitorMode()
Staging: rtl8192e: Rename variable bInitState
Staging: rtl8192e: Rename variable skb_waitQ
Staging: rtl8192e: Rename variable BasicRate
Staging: rtl8192e: Rename variable QueryRate
Staging: rtl8192e: Rename function rtllib_TURBO_Info()
Staging: rtl8192e: Rename function rtllib_WMM_Info()
Staging: rtl8192e: Rename function rtllib_MFIE_Grate()
Staging: rtl8192e: Rename function rtllib_MFIE_Brate()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_new_net()
Staging: rtl8192e: Fixup statement broken across 2 lines in rtllib_softmac_xmit()
Staging: rtl8192e: Fix function definition broken across multiple lines
Staging: rtl8192e: Fix statement broken across 2 lines in rtllib_rx_assoc_resp()
...
|
|
Commit 56df345917c0 ("i40e: Remove circular header dependencies and fix
headers") redistributed a number of includes from one large header file
to the locations they were needed. In some environments, types.h is not
included and causing compile issues. The driver should not rely on
implicit inclusion from other locations; explicitly include it to these
files.
Snippet of issue. Entire log can be seen through the Closes: link.
In file included from drivers/net/ethernet/intel/i40e/i40e_diag.h:7,
from drivers/net/ethernet/intel/i40e/i40e_diag.c:4:
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:33:9: error: unknown type name '__le16'
33 | __le16 flags;
| ^~~~~~
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:34:9: error: unknown type name '__le16'
34 | __le16 opcode;
| ^~~~~~
...
drivers/net/ethernet/intel/i40e/i40e_diag.h:22:9: error: unknown type name 'u32'
22 | u32 elements; /* number of elements if array */
| ^~~
drivers/net/ethernet/intel/i40e/i40e_diag.h:23:9: error: unknown type name 'u32'
23 | u32 stride; /* bytes between each element */
Reported-by: Martin Zaharinov <micron10@gmail.com>
Closes: https://lore.kernel.org/netdev/21BBD62A-F874-4E42-B347-93087EEA8126@gmail.com/
Fixes: 56df345917c0 ("i40e: Remove circular header dependencies and fix headers")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240117172534.3555162-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
|
If there are IPIP nexthops at the time when the driver is loaded (or the
devlink instance reloaded), the driver looks up the corresponding IPIP
entry. But IPIP entries are only created as a result of netdevice
notifications. Since the netdevice notifier is registered after the nexthop
notifier, mlxsw_sp_nexthop_type_init() never finds the IPIP entry,
registers the nexthop MLXSW_SP_NEXTHOP_TYPE_ETH, and fails to assign a CRIF
to the nexthop. Later on when the CRIF is necessary, the WARN_ON in
mlxsw_sp_nexthop_rif() triggers, causing the splat [1].
In order to fix the issue, reorder the netdevice notifier to be registered
before the nexthop one.
[1] (edited for clarity):
WARNING: CPU: 1 PID: 1364 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3245 mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum
Hardware name: Mellanox Technologies Ltd. MSN4410/VMOD0010, BIOS 5.11 01/06/2019
Call Trace:
? mlxsw_sp_nexthop_rif (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3246 (discriminator 1)) mlxsw_spectrum
__mlxsw_sp_nexthop_eth_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3637) mlxsw_spectrum
mlxsw_sp_nexthop_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3679 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3727) mlxsw_spectrum
mlxsw_sp_nexthop_group_update (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3757) mlxsw_spectrum
mlxsw_sp_nexthop_group_refresh (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4112) mlxsw_spectrum
mlxsw_sp_nexthop_obj_event (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5118 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5191 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5315 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5500) mlxsw_spectrum
nexthops_dump (net/ipv4/nexthop.c:217 net/ipv4/nexthop.c:440 net/ipv4/nexthop.c:3609)
register_nexthop_notifier (net/ipv4/nexthop.c:3624)
mlxsw_sp_router_init (drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:11486) mlxsw_spectrum
mlxsw_sp_init (drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3267) mlxsw_spectrum
__mlxsw_core_bus_device_register (drivers/net/ethernet/mellanox/mlxsw/core.c:2202) mlxsw_core
mlxsw_devlink_core_bus_device_reload_up (drivers/net/ethernet/mellanox/mlxsw/core.c:2265 drivers/net/ethernet/mellanox/mlxsw/core.c:1603) mlxsw_core
devlink_reload (net/devlink/dev.c:314 net/devlink/dev.c:475)
[...]
Fixes: 9464a3d68ea9 ("mlxsw: spectrum_router: Track next hops at CRIFs")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/74edb8d45d004e8d8f5318eede6ccc3d786d8ba9.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag <orelh@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after
failing to attach the region to an ACL group, we hit a NULL pointer
dereference upon 'region->group->tcam' [1].
Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0
[...]
Call Trace:
mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: 22a677661f56 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/fb6a4542bbc9fcab5a523802d97059bffbca7126.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__loop_update_dio only checks the alignment requirement for block backed
file systems, but misses them for the case where the loop device is
created directly on top of another block device. Due to this creating
a loop device with default option plus the direct I/O flag on a > 512 byte
sector size file system will lead to incorrect I/O being submitted to the
lower block device and a lot of error from the lock layer. This can
be seen with xfstests generic/563.
Fix the code in __loop_update_dio by factoring the alignment check into
a helper, and calling that also for the struct block_device of a block
device inode.
Also remove the TODO comment talking about dynamically switching between
buffered and direct I/O, which is a would be a recipe for horrible
performance and occasional data loss.
Fixes: 2e5ab5f379f9 ("block: loop: prepare for supporing direct IO")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240117175901.871796-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that
if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in
bytes, we'll write past the buffer.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218233
Fixes: cf29c5b66b9f ("iwlwifi: dbg_ini: implement time point handling")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111150610.2d2b8b870194.I14ed76505a5cf87304e0c9cc05cc0ae85ed3bf91@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
-Wstringop-overflow is broken on GCC11. In future changes it will
be moved to the normal C flags in the top level Makefile (out of
Makefile.extrawarn), but accounting for the compiler support.
Just remove it out of i915's forced extra warnings, preparing for the
upcoming change and avoiding build warnings to show up.
Fixes: 2250c7ead8ad ("drm/i915: enable W=1 warnings by default")
References: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112154912.1775199-1-lucas.demarchi@intel.com
(cherry picked from commit 05ae67d95bade8b7facd5612baea21c12d243149)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
This reverts commit 88b065943cb583e890324d618e8d4b23460d51a3.
Lenovo 82TQ is unhappy if we do the display on sequence this
late. The display output shows severe corruption.
It's unclear if this is a failure on our part (perhaps
something to do with sending commands in LP mode after HS
/video mode transmission has been started? Though the backlight
on command at least seems to work) or simply that there are
some commands in the sequence that are needed to be done
earlier (eg. could be some DSC init stuff?). If the latter
then I don't think the current Windows code would work
either, but maybe this was originally tested with an older
driver, who knows.
Root causing this fully would likely require a lot of
experimentation which isn't really feasible without direct
access to the machine, so let's just accept failure and
go back to the original sequence.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116210821.30194-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dc524d05974f615b145404191fcf91b478950499)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
mac80211 started to delete debugfs entries in certain cases, causing a
ath11k to crash when it tried to delete the entries later. Fix this by
relying on mac80211 to delete the entries when appropriate and adding
them from the vif_add_debugfs handler.
Fixes: 0a3d898ee9a8 ("wifi: mac80211: add/remove driver debugfs entries as appropriate")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218364
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115101805.1277949-1-benjamin@sipsolutions.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"We are continuing to see more fixes as hardware is available and code
is actually getting tested.
Core:
- Add a sysfs control for hotjoin
- Add fallback method for GETMXDS CCC
Drivers:
- cdns: fix prescale for i2c clock
- mipi-i3c-hci: more fixes now that the driver is used
- svc: hotjoin enabling/disabling support"
* tag 'i3c/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: document hotjoin sysfs entry
i3c: master: fix kernel-doc check warning
i3c: master: cdns: Update maximum prescaler value for i2c clock
i3c: master: fix Excess kernel-doc description warning
i3c: master: svc: return actual transfer data len
i3c: master: svc: rename read_len as actual_len
i3c: add actual_len in i3c_priv_xfer
i3c: master: svc: add hot join support
i3c: master: add enable(disable) hot join in sys entry
i3c: master: Fix build error
i3c: Add fallback method for GETMXDS CCC
i3c: mipi-i3c-hci: Add DMA bounce buffer for private transfers
i3c: mipi-i3c-hci: Handle I3C address header error in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Do not overallocate transfers in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Report NACK response from CCC command to core
|
