summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-21nvme: cleanup nvme_configure_apstChristoph Hellwig
Remove a level of indentation from the main code implementating the table search by using a goto for the APST not supported case. Also move the main comment above the function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2021-04-21nvme: do not try to reconfigure APST when the controller is not liveChristoph Hellwig
Do not call nvme_configure_apst when the controller is not live, given that nvme_configure_apst will fail due the lack of an admin queue when the controller is being torn down and nvme_set_latency_tolerance is called from dev_pm_qos_hide_latency_tolerance. Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance") Reported-by: Peng Liu <liupeng17@lenovo.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-04-21nvme: add 'kato' sysfs attributeHannes Reinecke
Add a 'kato' controller sysfs attribute to display the current keep-alive timeout value (if any). This allows userspace to identify persistent discovery controllers, as these will have a non-zero KATO value. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-21nvme: sanitize KATO settingHannes Reinecke
According to the NVMe base spec the KATO commands should be sent at half of the KATO interval, to properly account for round-trip times. As we now will only ever send one KATO command per connection we can easily use the recommended values. This also fixes a potential issue where the request timeout for the KATO command does not match the value in the connect command, which might be causing spurious connection drops from the target. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-21nvmet: avoid queuing keep-alive timer if it is disabledHou Pu
Issue following command: nvme set-feature -f 0xf -v 0 /dev/nvme1n1 # disable keep-alive timer nvme admin-passthru -o 0x18 /dev/nvme1n1 # send keep-alive command will make keep-alive timer fired and thus delete the controller like below: [247459.907635] nvmet: ctrl 1 keep-alive timer (0 seconds) expired! [247459.930294] nvmet: ctrl 1 fatal error occurred! Avoid this by not queuing delayed keep-alive if it is disabled when keep-alive command is received from the admin queue. Signed-off-by: Hou Pu <houpu.main@gmail.com> Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-21cpufreq: Kconfig: fix documentation linksAlexander Monakov
User documentation for cpufreq governors and drivers has been moved to admin-guide; adjust references from Kconfig entries accordingly. Remove references from undocumented cpufreq drivers, as well as the 'userspace' cpufreq governor, for which no additional details are provided in the admin-guide text. Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-21brd: expose number of allocated pages in debugfsCalvin Owens
While the maximum size of each ramdisk is defined either as a module parameter, or compile time default, it's impossible to know how many pages have currently been allocated by each ram%d device, since they're allocated when used and never freed. This patch creates a new directory at this location: /sys/kernel/debug/ramdisk_pages/ which will contain a file named "ram%d" for each instantiated ramdisk on the system. The file is read-only, and read() will output the number of pages currently held by that ramdisk. We lose track how much memory a ramdisk is using as pages once used are simply recycled but never freed. In instances where we exhaust the size of the ramdisk with a file that exceeds it, encounter ENOSPC and delete the file for mitigation; df would show decrease in used and increase in available blocks but the since we have touched all pages, the memory footprint of the ramdisk does not reflect the blocks used/available count ... [root@localhost ~]# mkfs.ext2 /dev/ram15 mke2fs 1.45.6 (20-Mar-2020) Creating filesystem with 4096 1k blocks and 1024 inodes [root@localhost ~]# mount /dev/ram15 /mnt/ram15/ [root@localhost ~]# cat /sys/kernel/debug/ramdisk_pages/ram15 58 [root@kerneltest008.06.prn3 ~]# df /dev/ram15 Filesystem 1K-blocks Used Available Use% Mounted on /dev/ram15 3963 31 3728 1% /mnt/ram15 [root@kerneltest008.06.prn3 ~]# dd if=/dev/urandom of=/mnt/ram15/test2 bs=1M count=5 dd: error writing '/mnt/ram15/test2': No space left on device 4+0 records in 3+0 records out 4005888 bytes (4.0 MB, 3.8 MiB) copied, 0.0446614 s, 89.7 MB/s [root@kerneltest008.06.prn3 ~]# df /mnt/ram15/ Filesystem 1K-blocks Used Available Use% Mounted on /dev/ram15 3963 3960 0 100% /mnt/ram15 [root@kerneltest008.06.prn3 ~]# cat /sys/kernel/debug/ramdisk_pages/ram15 1024 [root@kerneltest008.06.prn3 ~]# rm /mnt/ram15/test2 rm: remove regular file '/mnt/ram15/test2'? y [root@kerneltest008.06.prn3 /var]# df /dev/ram15 Filesystem 1K-blocks Used Available Use% Mounted on /dev/ram15 3963 31 3728 1% /mnt/ram15 # Acutal memory footprint [root@kerneltest008.06.prn3 /var]# cat /sys/kernel/debug/ramdisk_pages/ram15 1024 ... This debugfs counter will always reveal the accurate number of permanently allocated pages to the ramdisk. Signed-off-by: Calvin Owens <calvinowens@fb.com> [cleaned up the !CONFIG_DEBUG_FS case and API changes for HEAD] Signed-off-by: Kyle McMartin <jkkm@fb.com> [rebased] Signed-off-by: Saravanan D <saravanand@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21ACPI: video: use native backlight for GA401/GA502/GA503Luke D Jones
Force backlight control in these models to use the native interface at /sys/class/backlight/amdgpu_bl0. Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-21ACPI: APEI: remove redundant assignment to variable rcColin Ian King
The variable rc is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-21drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefishJiansong Chen
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid, so follow its registers offset setting. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21amd/display: allow non-linear multi-planar formatsSimon Ser
Accept non-linear buffers which use a multi-planar format, as long as they don't use DCC. Tested on GFX9 with NV12. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21ataflop: fix off by one in ataflop_probe()Dan Carpenter
Smatch complains that the "type > NUM_DISK_MINORS" should be >= instead of >. We also need to subtract one from "type" at the start. Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21ataflop: potential out of bounds in do_format()Dan Carpenter
The function uses "type" as an array index: q = unit[drive].disk[type]->queue; Unfortunately the bounds check on "type" isn't done until later in the function. Fix this by moving the bounds check to the start. Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21drm/amd/display: Update modifier list for gfx10_3Qingqing Zhuo
[Why] Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B is used instead by userspace. [How] Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B for modifiers with DCC supported. Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers") Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21drm/amdgpu: reserve fence slot to update page tablePhilip Yang
Forgot to reserve a fence slot to use sdma to update page table, cause below kernel BUG backtrace to handle vm retry fault while application is exiting. [ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281! [ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu] [ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280 [ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu] [ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu] [ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu] [ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu] [ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu] [ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu] [ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu] [ 133.049669] process_one_work+0x29f/0x640 [ 133.049678] worker_thread+0x39/0x3f0 [ 133.049685] ? process_one_work+0x640/0x640 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
2021-04-21spi: fsi: add a missing of_node_putChristophe JAILLET
'for_each_available_child_of_node' performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/504e431b900341249d331b868d90312cf41f415a.1618947919.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: Make error handling of gpiod_count() call cleanerAndy Shevchenko
Each time we call spi_get_gpio_descs() the num_chipselect is overwritten either by new value or by the old one. This is an extra operation in case gpiod_count() returns an error. Besides that it slashes the error handling of gpiod_count(). Refactor the code to make error handling of gpiod_count() call cleaner. Note, that gpiod_count() never returns 0, take this into account as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164040.40055-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: core.c: Improve a commentSebastian Fricke
s/regulator may on/regulator may already be enabled/ s/or left on/or was left on/ The aim of this patch is to make the comment more readable and to make it clear, that this is about a regulator, that is already enabled instead of a regulator that may be switched on. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Link: https://lore.kernel.org/r/20210421055236.13148-1-sebastian.fricke@posteo.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: Avoid a double 'of_node_get' in 'regulator_of_get_init_node()'Christophe JAILLET
'for_each_available_child_of_node()' already performs an 'of_node_get()' on child, so there is no need to perform another one before returning. Otherwise, a double 'get' is performed and a resource may never be released. Fixes: 925c85e21ed8 ("regulator: Factor out location of init data OF node") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/a79f0068812b89ff412d572a1171f22109c24132.1618947049.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: core.c: Fix indentation of commentShubhankar Kuranagatti
Shifted the closing */ of multiline comment to a new line This is done to maintain code uniformity Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210420034718.t7wudu6xcfpahflv@kewl-virtual-machine Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: s2mps11: Drop initialization via platform dataKrzysztof Kozlowski
None of the platforms with S2MPS11 use board files, so any initialization via platform data can be safely removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420170244.13467-5-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: s2mpa01: Drop initialization via platform dataKrzysztof Kozlowski
None of the platforms with S2MPA01 use board files, so any initialization via platform data can be safely removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420170244.13467-4-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: da9121: automotive variants identity fixAdam Ward
This patch fixes identification of DA913x parts by the DA9121 driver, where a lack of clarity lead to implementation on the basis that variant IDs were to be identical to the equivalent rated non-automotive parts. There is a new emphasis on the DT identity to cope with overlap in these ID's - this is not considered to be problematic, because projects would be exclusively using automotive or consumer grade parts. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/20210421120306.DB5B880007F@slsrvapps-01.diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21gpio: omap: Save and restore sysconfigTony Lindgren
As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-04-21platform/x86: intel_pmc_core: add ACPI dependencyArnd Bergmann
The driver now fails to build without ACPI: drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs': drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device' 617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0, This could probably be made optional, but it won't be used without ACPI in practice, so just add a Kconfig dependency. Fixes: 428131364f00 ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210421134957.3329062-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-21drm/ttm: Don't count pages in SG BOs against pages_limitFelix Kuehling
Pages in SG BOs were not allocated by TTM. So don't count them against TTM's pages limit. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210414064804.29356-9-Felix.Kuehling@amd.com
2021-04-21drm/ttm: fix return value checkChristian König
The function returns the number of swapped pages here. Only abort when we get a negative error code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com
2021-04-21of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addressesLeonardo Bras
Many other resource flag parsers already add this flag when the input has bits 24 & 25 set, so update this one to do the same. Some devices (like virtio-net) have more than one memory resource (like MMIO32 and MMIO64) and without this flag it would be needed to verify the address range to know which one is which. Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Link: https://lore.kernel.org/r/20210415180050.373791-1-leobras.c@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-21s390/zcrypt: fix zcard and zqueue hot-unplug memleakHarald Freudenberger
Tests with kvm and a kmemdebug kernel showed, that on hot unplug the zcard and zqueue structs for the unplugged card or queue are not properly freed because of a mismatch with get/put for the embedded kref counter. This fix now adjusts the handling of the kref counters. With init the kref counter starts with 1. This initial value needs to drop to zero with the unregister of the card or queue to trigger the release and free the object. Fixes: 29c2680fd2bf ("s390/ap: fix ap devices reference counting") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-21drivers: hv: Create a consistent pattern for checking Hyper-V hypercall statusJoseph Salisbury
There is not a consistent pattern for checking Hyper-V hypercall status. Existing code uses a number of variants. The variants work, but a consistent pattern would improve the readability of the code, and be more conformant to what the Hyper-V TLFS says about hypercall status. Implemented new helper functions hv_result(), hv_result_success(), and hv_repcomp(). Changed the places where hv_do_hypercall() and related variants are used to use the helper functions. Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20drbd: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of just letting the code fall through to the next, and by adding a fallthrough pseudo-keyword in places whre the code is intended to fall through. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20libata: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20video: hyperv_fb: Add ratelimit on error messageMichael Kelley
Due to a full ring buffer, the driver may be unable to send updates to the Hyper-V host. But outputing the error message can make the problem worse because console output is also typically written to the frame buffer. As a result, in some circumstances the error message is output continuously. Break the cycle by rate limiting the error message. Also output the error code for additional diagnosability. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618933459-10585-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Drivers: hv: vmbus: Increase wait time for VMbus unloadMichael Kelley
When running in Azure, disks may be connected to a Linux VM with read/write caching enabled. If a VM panics and issues a VMbus UNLOAD request to Hyper-V, the response is delayed until all dirty data in the disk cache is flushed. In extreme cases, this flushing can take 10's of seconds, depending on the disk speed and the amount of dirty data. If kdump is configured for the VM, the current 10 second timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD complete message may arrive well after the kdump kernel is already running, causing problems. Note that no problem occurs if kdump is not enabled because Hyper-V waits for the cache flush before doing a reboot through the BIOS/UEFI code. Fix this problem by increasing the timeout in vmbus_wait_for_unload() to 100 seconds. Also output periodic messages so that if anyone is watching the serial console, they won't think the VM is completely hung. Fixes: 911e1987efc8 ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Drivers: hv: vmbus: Initialize unload_event staticallyAndrea Parri (Microsoft)
If a malicious or compromised Hyper-V sends a spurious message of type CHANNELMSG_UNLOAD_RESPONSE, the function vmbus_unload_response() will call complete() on an uninitialized event, and cause an oops. Reported-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210420014350.2002-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Merge series "spi: altera: Add DFL bus support for Altera SPI" from ↵Mark Brown
matthew.gerlach@linux.intel.com Matthew Gerlach <matthew.gerlach@linux.intel.com>: From: Matthew Gerlach <matthew.gerlach@linux.intel.com> This patch set adds Device Feature List (DFL) bus support for the Altera SPI Master controller. Patch 1 separates spi-altera.c into spi-altera-core.c and spi-altera-platform.c. Patch 2 adds spi-altera-dfl.c. Matthew Gerlach (2): spi: altera: separate core code from platform code spi: altera: Add DFL bus driver for Altera API Controller drivers/spi/Kconfig | 18 +- drivers/spi/Makefile | 4 +- drivers/spi/spi-altera-core.c | 222 ++++++++++++++++++++++ drivers/spi/spi-altera-dfl.c | 204 ++++++++++++++++++++ drivers/spi/spi-altera-platform.c | 172 +++++++++++++++++ drivers/spi/spi-altera.c | 378 -------------------------------------- include/linux/spi/altera.h | 21 +++ 7 files changed, 639 insertions(+), 380 deletions(-) create mode 100644 drivers/spi/spi-altera-core.c create mode 100644 drivers/spi/spi-altera-dfl.c create mode 100644 drivers/spi/spi-altera-platform.c delete mode 100644 drivers/spi/spi-altera.c -- 1.8.3.1
2021-04-20spidev: Add Micron SPI NOR Authenta device compatibleShivamurthy Shastri
Add compatible string for Micron SPI NOR Authenta device. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Link: https://lore.kernel.org/r/20210419204015.1769-1-sshivamurthy@micron.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: Add DFL bus driver for Altera API ControllerMatthew Gerlach
This patch adds a Device Feature List (DFL) bus driver for the Altera SPI Master controller. The SPI master is connected to an Intel SPI Slave to Avalon Bridge inside an Intel MAX10 BMC Chip. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20platform/surface: aggregator: fix a bit testDan Carpenter
The "funcs" variable is a u64. If "func" is more than 31 then the BIT() shift will wrap instead of testing the high bits. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/YH6UUhJhGk3mk13b@mwanda Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-20platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" ↵Hans de Goede
smatch warning Change the type of ret form a size_t to a ssize_t, matching the prototype of simple_write_to_buffer(), fixing this warning reported by smatch: drivers/platform/x86/intel_pmc_core.c:1369 pmc_core_lpm_latch_mode_write() warn: unsigned 'ret' is never less than zero. Fixes: 8074a79fad2e ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode") Cc: David E. Box <david.e.box@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210419143109.30612-1-hdegoede@redhat.com
2021-04-20block/rnbd: Use strscpy instead of strlcpyDima Stepanov
During checkpatch analyzing the following warning message was found: WARNING:STRLCPY: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Fix it by using strscpy calls instead of strlcpy. Signed-off-by: Dima Stepanov <dmitrii.stepanov@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210419073722.15351-20-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_nameDima Stepanov
cppcheck report the following error: rnbd/rnbd-clt-sysfs.c:522:36: error: The variable 'buf' is used both as a parameter and as destination in snprintf(). The origin and destination buffers overlap. Quote from glibc (C-library) documentation (http://www.gnu.org/software/libc/manual/html_mono/libc.html#Formatted-Output-Functions): "If copying takes place between objects that overlap as a result of a call to sprintf() or snprintf(), the results are undefined." [sprintfOverlappingData] Fix it by initializing the buf variable in the first snprintf call. Fixes: 91f4acb2801c ("block/rnbd-clt: support mapping two devices") Signed-off-by: Dima Stepanov <dmitrii.stepanov@ionos.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210419073722.15351-19-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt: Remove max_segment_sizeJack Wang
We always map with SZ_4K, so do not need max_segment_size. Cc: Leon Romanovsky <leonro@nvidia.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210419073722.15351-18-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt: Generate kobject_uevent when the rnbd device state changesMd Haris Iqbal
When an RTRS session state changes, the transport layer generates an event to RNBD. Then RNBD will change the state of the RNBD client device accordingly. This commit add kobject_uevent when the RNBD device state changes. With this udev rules can be configured to react accordingly. Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-17-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_evGioh Kim
struct rtrs_srv is not used when handling rnbd_srv_rdma_ev messages, so cleaned up rdma_ev function pointer in rtrs_srv_ops also is changed. Cc: Leon Romanovsky <leonro@nvidia.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Aleksei Marov <aleksei.marov@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210419073722.15351-16-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt: Support polling mode for IO latency optimizationGioh Kim
RNBD can make double-queues for irq-mode and poll-mode. For example, on 4-CPU system 8 request-queues are created, 4 for irq-mode and 4 for poll-mode. If the IO has HIPRI flag, the block-layer will call .poll function of RNBD. Then IO is sent to the poll-mode queue. Add optional nr_poll_queues argument for map_devices interface. To support polling of RNBD, RTRS client creates connections for both of irq-mode and direct-poll-mode. For example, on 4-CPU system it could've create 5 connections: con[0] => user message (softirq cq) con[1:4] => softirq cq After this patch, it can create 9 connections: con[0] => user message (softirq cq) con[1:4] => softirq cq con[5:8] => DIRECT-POLL cq Cc: Leon Romanovsky <leonro@nvidia.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210419073722.15351-14-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt: Fix missing a memory free when unloading the moduleGioh Kim
When unloading the rnbd-clt module, it does not free a memory including the filename of the symbolic link to /sys/block/rnbdX. It is found by kmemleak as below. unreferenced object 0xffff9f1a83d3c740 (size 16): comm "bash", pid 736, jiffies 4295179665 (age 9841.310s) hex dump (first 16 bytes): 21 64 65 76 21 6e 75 6c 6c 62 30 40 62 6c 61 00 !dev!nullb0@bla. backtrace: [<0000000039f0c55e>] 0xffffffffc0456c24 [<000000001aab9513>] kernfs_fop_write+0xcf/0x1c0 [<00000000db5aa4b3>] vfs_write+0xdb/0x1d0 [<000000007a2e2207>] ksys_write+0x65/0xe0 [<00000000055e280a>] do_syscall_64+0x50/0x1b0 [<00000000c2b51831>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-13-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-clt: Improve find_or_create_sess() return checkTom Rix
clang static analysis reports this problem rnbd-clt.c:1212:11: warning: Branch condition evaluates to a garbage value else if (!first) ^~~~~~ This is triggered in the find_and_get_or_create_sess() call because the variable first is not initialized and the earlier check is specifically for if (sess == ERR_PTR(-ENOMEM)) This is false positive. But the if-check can be reduced by initializing first to false and then returning if the call to find_or_creat_sess() does not set it to true. When it remains false, either sess will be valid or not. The not case is caught by find_and_get_or_create_sess()'s caller rnbd_clt_map_device() sess = find_and_get_or_create_sess(...); if (IS_ERR(sess)) return ERR_CAST(sess); Since find_and_get_or_create_sess() initializes first to false setting it in find_or_create_sess() is not needed. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-12-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-20block/rnbd-srv: Remove force_close file after holding a lockGioh Kim
We changed the rnbd_srv_sess_dev_force_close to use try-lock because rnbd_srv_sess_dev_force_close and process_msg_close can generate a deadlock. Now rnbd_srv_sess_dev_force_close would do nothing if it fails to get the lock. So removing the force_close file should be moved to after the lock. Or the force_close file is removed but the others are not removed. Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-11-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-17 05:39:53 +0000