summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-27net: hns3: adjust string spaces of some parameters of tx bd info in debugfsGuangbin Huang
This patch adjusts the string spaces of some parameters of tx bd info in debugfs according to their maximum needs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: expand buffer len for some debugfs commandGuangbin Huang
The specified buffer length for three debugfs files fd_tcam, uc and tqp is not enough for their maximum needs, so this patch fixes them. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs") Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: add more string spaces for dumping packets number of queue info ↵Jie Wang
in debugfs As the width of packets number registers is 32 bits, they needs at most 10 characters for decimal data printing, but now the string spaces is not enough, so this patch fixes it. Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix data endian problem of some functions of debugfsJie Wang
The member data in struct hclge_desc is type of __le32, it needs endian conversion before using it, and some functions of debugfs didn't do that, so this patch fixes it. Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: ignore reset event before initialization process is doneGuangbin Huang
Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND modeYufeng Mo
Currently, the workqueue of hclge/hclgevf is executed on the CPU that initiates scheduling requests by default. In stress scenarios, the CPU may be busy and workqueue scheduling is completed after a long period of time. To avoid this situation and implement proper scheduling, use the WQ_UNBOUND mode instead. In this way, the workqueue can be performed on a relatively idle CPU. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix pause config problem after autoneg disabledGuangbin Huang
If a TP port is configured by follow steps: 1.ethtool -s ethx autoneg off speed 100 duplex full 2.ethtool -A ethx rx on tx on 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) 4.ethtool -s ethx autoneg off speed 100 duplex full In step 3, driver will set rx&tx pause parameters of hardware to off as pause parameters negotiated with link partner are off. After step 4, the "ethtool -a ethx" command shows both rx and tx pause parameters are on. However, pause parameters of hardware are still off and port has no flow control function actually. To fix this problem, if autoneg is disabled, driver uses its saved parameters to restore pause of hardware. If the speed is not changed in this case, there is no link state changed for phy, it will cause the pause parameter is not taken effect, so we need to force phy to go down and up. Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27Revert "wcn36xx: Enable firmware link monitoring"Bryan O'Donoghue
Firmware link offload monitoring can be made to work in 3/4 cases by switching on firmware feature bit WLANACTIVE_OFFLOAD - Secure power-save on - Secure power-save off - Open power-save on However, with an open AP if we switch off power-saving - thus never entering Beacon Mode Power Save - BMPS, firmware never forwards loss of beacon upwards. We had hoped that WLANACTIVE_OFFLOAD and some fixes for sequence numbers would unblock this but, it hasn't and further investigation is required. Its possible to have a complete set of Secure power-save on/off and Open power-save on/off provided we use Linux' link monitoring mechanism. While we debug the Open AP failure we need to fix upstream. This reverts commit c973fdad79f6eaf247d48b5fc77733e989eb01e1. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025093037.3966022-2-bryan.odonoghue@linaro.org
2021-10-27wcn36xx: Fix packet drop on resumeLoic Poulain
If the system is resumed because of an incoming packet, the wcn36xx RX interrupts is fired before actual resuming of the wireless/mac80211 stack, causing any received packets to be simply dropped. E.g. a ping request causes a system resume, but is dropped and so never forwarded to the IP stack. This change fixes that, disabling DMA interrupts on suspend to no pass packets until mac80211 is resumed and ready to handle them. Note that it's not incompatible with RX irq wake. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635150496-19290-1-git-send-email-loic.poulain@linaro.org
2021-10-27wcn36xx: Fix discarded frames due to wrong sequence numberLoic Poulain
The firmware is offering features such as ARP offload, for which firmware crafts its own (QoS)packets without waking up the host. Point is that the sequence numbers generated by the firmware are not in sync with the host mac80211 layer and can cause packets such as firmware ARP reponses to be dropped by the AP (too old SN). To fix this we need to let the firmware manages the sequence numbers by its own (except for QoS null frames). There is a SN counter for each QoS queue and one global/baseline counter for Non-QoS. Fixes: 84aff52e4f57 ("wcn36xx: Use sequence number allocated by mac80211") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635150336-18736-1-git-send-email-loic.poulain@linaro.org
2021-10-27wcn36xx: add proper DMA memory barriers in rx pathBenjamin Li
This is essentially exactly following the dma_wmb()/dma_rmb() usage instructions in Documentation/memory-barriers.txt. The theoretical races here are: 1. DXE (the DMA Transfer Engine in the Wi-Fi subsystem) seeing the dxe->ctrl & WCN36xx_DXE_CTRL_VLD write before the dxe->dst_addr_l write, thus performing DMA into the wrong address. 2. CPU reading dxe->dst_addr_l before DXE unsets dxe->ctrl & WCN36xx_DXE_CTRL_VLD. This should generally be harmless since DXE doesn't write dxe->dst_addr_l (no risk of freeing the wrong skb). Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Benjamin Li <benl@squareup.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211023001528.3077822-1-benl@squareup.com
2021-10-27wcn36xx: Fix HT40 capability for 2Ghz bandLoic Poulain
All wcn36xx controllers are supposed to support HT40 (and SGI40), This doubles the maximum bitrate/throughput with compatible APs. Tested with wcn3620 & wcn3680B. Cc: stable@vger.kernel.org Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634737133-22336-1-git-send-email-loic.poulain@linaro.org
2021-10-27Revert "wcn36xx: Disable bmps when encryption is disabled"Bryan O'Donoghue
This reverts commit c6522a5076e1a65877c51cfee313a74ef61cabf8. Testing on tip-of-tree shows that this is working now. Revert this and re-enable BMPS for Open APs. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022140447.2846248-3-bryan.odonoghue@linaro.org
2021-10-27wcn36xx: Treat repeated BMPS entry fail as connection lossBryan O'Donoghue
On an open AP when you pull the plug on the AP, if we are not already in BMPS mode then the firmware will not generate a disconnection event. Instead we need to monitor for failure to enter BMPS and treat a string of failures as connection loss. Secure AP connections don't appear to demonstrate this behavior so the work-around is limited to open APs only. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022140447.2846248-2-bryan.odonoghue@linaro.org
2021-10-27wcn36xx: Add chained transfer support for AMSDULoic Poulain
WCNSS RX DMA transfer support is limited to 3872 bytes, which is enough for simple MPDUs (single MSDU), but not enough for cases with A-MSDU (depending on max AMSDU size or max MPDU size). In that case the MPDU is spread over multiple transfers, with the first transfer containing the MPDU header and (at least) the first A-MSDU subframe and additional transfer(s) containing the following A-MSDUs. This can be handled with a series of flags to tagging the first and last A-MSDU transfers. In that case we have to bufferize and re-linearize the A-MSDU buffers into a proper MPDU skb before forwarding to mac80211 (in the same way as it is done in ath10k). This change also includes sanity check of the buffer descriptor to prevent skb overflow. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634557705-11120-1-git-send-email-loic.poulain@linaro.org
2021-10-27wcn36xx: Enable hardware scan offload for 5Ghz bandLoic Poulain
Until now, offload scanning for 5Ghz channels was considered broken. However it was mostly a driver issue, caused by bad reporting of the beacons/probe-resp bands and frequencies, which has been fixed. We can now allow offload scan for 5GHz band, this reduces the scanning time comparing to software driven scanning. Note that offloaded scan is limited to 48 channels, check for this. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634554678-7993-2-git-send-email-loic.poulain@linaro.org
2021-10-27wcn36xx: Correct band/freq reporting on RXLoic Poulain
For packets originating from hardware scan, the channel and band is included in the buffer descriptor (bd->rf_band & bd->rx_ch). For 2Ghz band the channel value is directly reported in the 4-bit rx_ch field. For 5Ghz band, the rx_ch field contains a mapping index (given the 4-bit limitation). The reserved0 value field is also used to extend 4-bit mapping to 5-bit mapping to support more than 16 5Ghz channels. This change adds correct reporting of the frequency/band, that is used in scan mechanism. And is required for 5Ghz hardware scan support. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1634554678-7993-1-git-send-email-loic.poulain@linaro.org
2021-10-27libertas: replace snprintf in show functions with sysfs_emitYe Guojin
coccicheck complains about the use of snprintf() in sysfs show functions: WARNING use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022090438.1065286-1-ye.guojin@zte.com.cn
2021-10-27rtw89: Fix variable dereferenced before check 'sta'Ping-Ke Shih
The pointer rtwsta is dereferencing pointer sta before sta is being null checked. Fix this by assigning sta->drv_priv to rtwsta only if sta is not NULL, otherwise just NULL. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022061242.8383-1-pkshih@realtek.com
2021-10-27rtw89: fix return value in hfc_pub_cfg_chkKevin Lo
It seems to me when pub_cfg->grp0 + pub_cfg->grp1 != pub_cfg->pub_max is true, it should return -EFAULT rather than 0. Otherwise, the function doesn't need to exist. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXEJey8lKksAZif4@ns.kevlo.org
2021-10-27rtw89: remove duplicate register definitionsKevin Lo
Remove duplicate register definitions. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXD+KL+xzFsnGShb@ns.kevlo.org
2021-10-27rtw89: fix error function parameterLv Ruyi
This patch fixes the following Coccinelle warning: drivers/net/wireless/realtek/rtw89/rtw8852a.c:753: WARNING possible condition with no effect (if == else) Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211021042035.1042463-1-lv.ruyi@zte.com.cn
2021-10-27libertas: Fix possible memory leak in probe and disconnectWang Hai
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88812c7d7400 (size 512): comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s) hex dump (first 32 bytes): 00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00 .h.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490 [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470 [<ffffffffa02c9873>] if_usb_probe+0x63/0x446 [usb8xxx] [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore] [<ffffffff82b59630>] really_probe+0x190/0x480 [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180 [<ffffffff82b59af3>] driver_probe_device+0x53/0x130 [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130 [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190 [<ffffffff82b593c9>] __device_attach+0x1c9/0x270 [<ffffffff82b5a250>] device_initial_probe+0x20/0x30 [<ffffffff82b579c2>] bus_probe_device+0x142/0x160 [<ffffffff82b52e49>] device_add+0x829/0x1300 [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore] [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore] [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020120345.2016045-3-wanghai38@huawei.com
2021-10-27libertas_tf: Fix possible memory leak in probe and disconnectWang Hai
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88810a2ddc00 (size 512): comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s) hex dump (first 32 bytes): 00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00 .P.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490 [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470 [<ffffffffa02a1530>] if_usb_probe+0x60/0x37c [libertas_tf_usb] [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore] [<ffffffff82b59630>] really_probe+0x190/0x480 [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180 [<ffffffff82b59af3>] driver_probe_device+0x53/0x130 [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130 [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190 [<ffffffff82b593c9>] __device_attach+0x1c9/0x270 [<ffffffff82b5a250>] device_initial_probe+0x20/0x30 [<ffffffff82b579c2>] bus_probe_device+0x142/0x160 [<ffffffff82b52e49>] device_add+0x829/0x1300 [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore] [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore] [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: c305a19a0d0a ("libertas_tf: usb specific functions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020120345.2016045-2-wanghai38@huawei.com
2021-10-27wlcore: spi: Use dev_err_probe()Geert Uytterhoeven
Use the existing dev_err_probe() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/465e76901b801ac0755088998249928fd546c08a.1634647460.git.geert+renesas@glider.be
2021-10-27Merge tag 'iwlwifi-next-for-kalle-2021-10-22' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.16 * Support for 160MHz in ranging measurements; * Some fixes in HE capabilities; * Fixes in vendor specific capabilities; * Add the PC of both processors in error dumps; * Small fix in TDLS; * Code to sanitize firmware dumps; * Updates for new FW rate and flags format; * Continue implementation of new rate and flags format in the FW APIs; * Some fixes for BZ family initialization; * Fix session protection in some scenarios; * Some debugging improvements; * Fix BT-coex priority; * Improve PS-poll timeout detection; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Fri 22 Oct 2021 11:28:43 AM EEST # gpg: using RSA key 1772CD7E06F604F5A6EBCB26A1479CA21A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" [full] # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>" [full]
2021-10-26net/mlx5: Lag, Make mlx5_lag_is_multipath() be static inlineMaor Dickman
Fix "no previous prototype" W=1 warnings when CONFIG_MLX5_CORE_EN is not set: drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h:34:6: error: no previous prototype for ‘mlx5_lag_is_multipath’ [-Werror=missing-prototypes] 34 | bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev) { return false; } | ^~~~~~~~~~~~~~~~~~~~~ Fixes: 14fe2471c628 ("net/mlx5: Lag, change multipath and bonding to be mutually exclusive") Signed-off-by: Maor Dickman <maord@nvidia.com>
2021-10-26net/mlx5e: Prevent HW-GRO and CQE-COMPRESS features operate togetherKhalid Manaa
HW-GRO and CQE-COMPRESS are mutually exclusive, this commit adds this restriction. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add HW-GRO offloadKhalid Manaa
This commit introduces HW-GRO offload by using the SHAMPO feature - Add set feature handler for HW-GRO. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add HW_GRO statisticsKhalid Manaa
This patch adds HW_GRO counters to RX packets statistics: - gro_match_packets: counter of received packets with set match flag. - gro_packets: counter of received packets over the HW_GRO feature, this counter is increased by one for every received HW_GRO cqe. - gro_bytes: counter of received bytes over the HW_GRO feature, this counter is increased by the received bytes for every received HW_GRO cqe. - gro_skbs: counter of built HW_GRO skbs, increased by one when we flush HW_GRO skb (when we call a napi_gro_receive with hw_gro skb). - gro_large_hds: counter of received packets with large headers size, in case the packet needs new SKB, the driver will allocate new one and will not use the headers entry to build it. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: HW_GRO cqe handler implementationKhalid Manaa
this patch updates the SHAMPO CQE handler to support HW_GRO, changes in the SHAMPO CQE handler: - CQE match and flush fields are used to determine if to build new skb using the new received packet, or to add the received packet data to the existing RQ.hw_gro_skb, also this fields are used to determine when to flush the skb. - in the end of the function mlx5e_poll_rx_cq the RQ.hw_gro_skb is flushed. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add data path for SHAMPO featureBen Ben-Ishay
The header buffer is used to store the headers of the rx packets. The header buffer size deduced from WorkQueue size + restriction of max packets per WorkQueueElement. This commit adds the functionality for posting/updating memory for the header buffer during the posting/updating of WQEs. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add handle SHAMPO cqe supportKhalid Manaa
This patch adds the new CQE SHAMPO fields: - flush: indicates that we must close the current session and pass the SKB to the network stack. - match: indicates that the current packet matches the oppened session, the packet will be merge into the current SKB. - header_size: the size of the packet headers that written into the headers buffer. - header_entry_index: the entry index in the headers buffer. - data_offset: packets data offset in the WQE. Also new cqe handler is added to handle SHAMPO packets: - The new handler uses CQE SHAMPO fields to build the SKB. CQE's Flush and match fields are not used in this patch, packets are not merged in this patch. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add control path for SHAMPO featureBen Ben-Ishay
This commit introduces the control path infrastructure for SHAMPO feature. SHAMPO feature enables packet stitching by splitting packets to header and payload, the header is placed on a dedicated buffer and the payload on the RX ring, this allows stitching the data part of a flow together continuously in the receive buffer. SHAMPO feature is implemented as linked list striding RQ feature. To support packets splitting and payload stitching: - Enlarge the ICOSQ and the correspond CQ to support the header buffer memory regions. - Add support to create linked list striding RQ with SHAMPO feature set in the open_rq function. - Add deallocation function and corresponded calls for SHAMPO header buffer. - Add mlx5e_create_umr_klm_mkey to support KLM mkey for the header buffer. - Rename mlx5e_create_umr_mkey to mlx5e_create_umr_mtt_mkey. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add support to klm_umr_wqeBen Ben-Ishay
This commit adds the needed definitions for using the klm_umr_wqe. UMR stands for user-mode memory registration, is a mechanism to alter address translation properties of MKEY by posting WorkQueueElement aka WQE on send queue. MKEY stands for memory key, MKEY are used to describe a region in memory that can be later used by HW. KLM stands for {Key, Length, MemVa}, KLM_MKEY is indirect MKEY that enables to map multiple memory spaces with different sizes in unified MKEY. klm_umr_wqe is a UMR that use to update a KLM_MKEY. SHAMPO feature uses KLM_MKEY for memory registration of his header buffer. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Rename TIR lro functions to TIR packet merge functionsKhalid Manaa
This series introduces new packet merge type, therefore rename lro functions to packet merge to support the new merge type: - Generalize + rename mlx5e_build_tir_ctx_lro to mlx5e_build_tir_ctx_packet_merge. - Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge. - Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge. - Rename lro_en in mlx5e_params to packet_merge_type type and combine packet_merge params into one struct mlx5e_packet_merge_param. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5: Add SHAMPO caps, HW bits and enumerationsBen Ben-Ishay
This commit adds SHAMPO bit to hca_cap and SHAMPO capabilities structure, SHAMPO related HW spec hardware fields and enumerations. SHAMPO stands for: split headers and merge payload offload. SHAMPO new fields: WQ: - headers_mkey: mkey that represents the headers buffer, where the packets headers will be written by the HW. - shampo_enable: flag to verify if the WQ supports SHAMPO feature. - log_reservation_size: the log of the reservation size where the data of the packet will be written by the HW. - log_max_num_of_packets_per_reservation: log of the maximum number of packets that can be written to the same reservation. - log_headers_entry_size: log of the header entry size of the headers buffer. - log_headers_buffer_entry_num: log of the entries number of the headers buffer. RQ: - shampo_no_match_alignment_granularity: the HW alignment granularity in case the received packet doesn't match the current session. - shampo_match_criteria_type: the type of match criteria. - reservation_timeout: the maximum time that the HW will hold the reservation. mlx5_ifc_shampo_cap_bits, the capabilities of the SHAMPO feature: - shampo_log_max_reservation_size: the maximum allowed value of the field WQ.log_reservation_size. - log_reservation_size: the minimum allowed value of the field WQ.log_reservation_size. - shampo_min_mss_size: the minimum payload size of packet that can open a new session or be merged to a session. - shampo_max_log_headers_entry_size: the maximum allowed value of the field WQ.log_headers_entry_size Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Rename lro_timeout to packet_merge_timeoutBen Ben-Ishay
TIR stands for transport interface receive, the TIR object is responsible for performing all transport related operations on the receive side like packet processing, demultiplexing the packets to different RQ's, etc. lro_timeout is a field in the TIR that is used to set the timeout for lro session, this series introduces new packet merge type, therefore rename lro_timeout to packet_merge_timeout for all packet merge types. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26Merge tag 'arm-soc-fixes-5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "One last set of small fixes for the soc tree: - Incorrect ethernet phy settings found on i.mx and allwinner platforms - a revert for a Qualcomm DT change that caused a boot regression - four patches for incorrect settings in i.MX DT files - new MAINTAINER file entries for dhcom boards - a Kconfig fix for a reset driver that became unselectable - three more code changes for bugs in reset drivers" * tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1 Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct reset: socfpga: add empty driver allowing consumers to probe reset: tegra-bpmp: Handle errors in BPMP response reset: pistachio: Re-enable driver selection reset: brcmstb-rescal: fix incorrect polarity of status bit ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
2021-10-26net: phy: fixed warning: Function parameter not describedLuo Jie
Fixed warning: Function parameter or member 'enable' not described in 'genphy_c45_fast_retrain' Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211026102957.17100-1-luoj@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26watchdog: Fix OMAP watchdog early handlingWalter Stoll
TI's implementation does not service the watchdog even if the kernel command line parameter omap_wdt.early_enable is set to 1. This patch fixes the issue. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: ixp4xx_wdt: Fix address space warningGuenter Roeck
sparse reports the following address space warning. drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: incorrect type in assignment (different address spaces) drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: expected void [noderef] __iomem *base drivers/watchdog/ixp4xx_wdt.c:122:20: sparse: got void *platform_data Add a typecast to solve the problem. Fixes: 21a0a29d16c6 ("watchdog: ixp4xx: Rewrite driver to use core") Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210911042925.556889-1-linux@roeck-us.net Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: sbsa: drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210917092024.19323-1-krzysztof.kozlowski@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26watchdog: sbsa: only use 32-bit accessorsJamie Iles
SBSA says of the generic watchdog: All registers are 32 bits in size and should be accessed using 32-bit reads and writes. If an access size other than 32 bits is used then the results are IMPLEMENTATION DEFINED. and for qemu, the implementation will only allow 32-bit accesses resulting in a synchronous external abort when configuring the watchdog. Use lo_hi_* accessors rather than a readq/writeq. Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/20210903112101.493552-1-quic_jiles@quicinc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"Guenter Roeck
This reverts commit cb011044e34c ("watchdog: iTCO_wdt: Account for rebooting on second timeout") and commit aec42642d91f ("watchdog: iTCO_wdt: Fix detection of SMI-off case") since those patches cause a regression on certain boards (https://bugzilla.kernel.org/show_bug.cgi?id=213809). While this revert may result in some boards to only reset after twice the configured timeout value, that is still better than a watchdog reset after half the configured value. Fixes: cb011044e34c ("watchdog: iTCO_wdt: Account for rebooting on second timeout") Fixes: aec42642d91f ("watchdog: iTCO_wdt: Fix detection of SMI-off case") Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Mantas Mikulėnas <grawity@gmail.com> Reported-by: Javier S. Pedro <debbugs@javispedro.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211008003302.1461733-1-linux@roeck-us.net Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-26net/mlx5: remove the recent devlink paramsJakub Kicinski
revert commit 46ae40b94d88 ("net/mlx5: Let user configure io_eq_size param") revert commit a6cb08daa3b4 ("net/mlx5: Let user configure event_eq_size param") revert commit 554604061979 ("net/mlx5: Let user configure max_macs param") The EQE parameters are applicable to more drivers, they should be configured via standard API, probably ethtool. Example of another driver needing something similar: https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/ The last param for "max_macs" is probably fine but the documentation is severely lacking. The meaning and implications for changing the param need to be stated. Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: lan78xx: fix division by zero in send pathJohan Hovold
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: phylink: use supported_interfaces for phylink validationRussell King (Oracle)
If the network device supplies a supported interface bitmap, we can use that during phylink's validation to simplify MAC drivers in two ways by using the supported_interfaces bitmap to: 1. reject unsupported interfaces before calling into the MAC driver. 2. generate the set of all supported link modes across all supported interfaces (used mainly for SFP, but also some 10G PHYs.) Suggested-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26ifb: Depend on netfilter alternatively to tcLukas Wunner
IFB originally depended on NET_CLS_ACT for traffic redirection. But since v4.5, that may be achieved with NFT_FWD_NETDEV as well. Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v4.5+: bcfabee1afd9: netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: ax88796c: Remove pointless check in ax88796c_open()Nathan Chancellor
Clang warns: drivers/net/ethernet/asix/ax88796c_main.c:851:24: error: address of array 'ax_local->phydev->advertising' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] if (ax_local->phydev->advertising && ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ ~~ advertising cannot be NULL here if ax_local is not NULL, which cannot happen due to the check in ax88796c_probe(). Remove the check. Link: https://github.com/ClangBuiltLinux/linux/issues/1492 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 03:03:25 +0000