summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-09-04irqchip: mips-gic: Convert remaining shared reg access to new accessorsPaul Burton
Convert the remaining accesses to registers in the GIC shared register block to use the new accessor functions provided by asm/mips-gic.h, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_map_to_vpe()Paul Burton
Remove the gic_map_to_vpe() function in favour of using the new write_gic_map_vp() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_map_to_pin()Paul Burton
Remove the gic_map_to_pin() function in favour of using the new write_gic_map_pin() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_dual_edge()Paul Burton
Remove the gic_set_dual_edge() function in favour of using the new change_gic_dual() accessor function which provides equivalent functionality. This also allows us to remove the gic_update_bits() function which gic_set_dual_edge() was the last user of, along with the GIC_INTR_OFS() & GIC_INTR_BIT() macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17031/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_trigger()Paul Burton
Remove the gic_set_trigger() function in favour of using the new change_gic_trig() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17030/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_set_polarity()Paul Burton
Remove the gic_set_polarity() function in favour of using the new change_gic_pol() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Drop gic_(re)set_mask() functionsPaul Burton
The gic_set_mask() & gic_reset_mask() functions are now no more convenient to call than the write_gic_smask() or write_gic_rmask() accessor functions. Remove the layer of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17028/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Simplify gic_local_irq_domain_map()Paul Burton
Simplify gic_local_irq_domain_map() by: - Moving the check for invalid IRQs outside of the loop. - Moving the decision about whether to use gic_cpu_pin or timer_cpu_pin outside of the loop. - Using the new write_gic_vo_map() accessor function to avoid the need to handle each map register separately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17027/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Simplify shared interrupt pending/mask readsPaul Burton
Simplify the reads of the bitmaps indicating pending & masked interrupts in gic_handle_shared_int() using the __ioread32_copy() & __ioread64_copy() helper functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove gic_read_local_vp_id()Paul Burton
Nothing needs gic_read_local_vp_id() any longer, so remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17024/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04irqchip: mips-gic: Remove counter access functionsPaul Burton
The MIPS GIC clocksource driver is no longer using the accessor functions provided by the irqchip driver, so remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04Merge branch 'linus' into locking/core, to fix up conflictsIngo Molnar
Conflicts: mm/page_alloc.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-04dma-coherent: remove an unused variableChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2017-09-03Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-09-03 Here's one last bluetooth-next pull request for the 4.14 kernel: - NULL pointer fix in ca8210 802.15.4 driver - A few "const" fixes - New Kconfig option for disabling legacy interfaces Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Rename real_dev_info to portSubash Abhinov Kasiviswanathan
Make it similar to drivers like ipvlan / macvlan so it is easier to read. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Implement ndo_get_iflinkSubash Abhinov Kasiviswanathan
This makes it easier to find out the parent dev. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Refactor the new rmnet dev creationSubash Abhinov Kasiviswanathan
Data format can be directly set from rmnet_newlink() since the rmnet real dev info is already available. Since __rmnet_get_real_dev_info() is no longer used in rmnet_config.c after removal of those functions, move content to rmnet_get_real_dev_info(). __rmnet_set_endpoint_config() is collapsed into rmnet_set_endpoint_config() since only mux_id was being set additionally within it. Remove an unnecessary mux_id check. Set the mux_id for the rmnet_dev within rmnet_vnd_newlink() itself. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Move the device creation logSubash Abhinov Kasiviswanathan
The current log is not very useful as it does not log the device name since it it is prior to registration - (unnamed net_device) (uninitialized): Setting up device Modify to log after the device registration - rmnet1: rmnet dev created Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Remove the unused endpoint -1Subash Abhinov Kasiviswanathan
This was used only in the original patch series where the IOCTLs were present and is no longer in use. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: qualcomm: rmnet: Fix memory corruption if mux_id is greater than 32Subash Abhinov Kasiviswanathan
rmnet_rtnl_validate() was checking for upto mux_id 254, however the rmnet_devices devices could hold upto 32 entries only. Fix this by increasing the size of the rmnet_devices. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: flower: restore RTNL locking around representor updatesJakub Kicinski
When we moved to updating representors from a workqueue grabbing the RTNL somehow got lost in the process. Restore it, and make sure RCU lock is not held while we are grabbing the RTNL. RCU protects the representor table, so since we will be under RTNL we can drop RCU lock as soon as we find the netdev pointer. RTNL is needed for the dev_set_mtu() call. Fixes: 2dff19622421 ("nfp: process MTU updates from firmware flower app") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: build the flower offload by defaultJakub Kicinski
It's reasonable to assume that if user selects to build the NFP driver all offload capabilities will be enabled by default. Change the CONFIG_NFP_APP_FLOWER to default to enabled. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: be drop monitor friendlyJakub Kicinski
Use dev_consume_skb_any() in place of dev_kfree_skb_any() when control frame has been successfully processed in flower and on the driver's main TX completion path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: move the start/stop app callbacks backJakub Kicinski
Since representors are now created with a separate callback start/stop app callbacks can be moved again to their original location. They are intended to app-specific init/clean up over the control channel. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: flower: base lifetime of representors on existence of lower vNICJakub Kicinski
Create representors after lower vNIC is registered and destroy them before it is destroyed. Move the code out of start/stop callbacks directly into vnic_init/clean callbacks. Make sure SR-IOV callbacks don't try to create representors when lower device does not exist. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: separate app vNIC init/clean from alloc/freeJakub Kicinski
We currently only have one app callback for vNIC creation and destruction. This is insufficient, because some actions have to be taken before netdev is registered, after it's registered and after it's unregistered. Old callbacks were really corresponding to alloc/free actions. Rename them and add proper init/clean. Apps using representors will be able to use new callbacks to manage lifetime of upper devices. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03Merge tag 'mlx5-updates-2017-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-09-03 This series from Tariq includes micro data path optimization for mlx5e netdevice driver. Mainly Tariq introduces the following changes to NAPI and RX handling path of the driver: - RX ring structure reorganizing - Trivial code refactoring and optimization - NAPI busy-poll for when fast UMR is in progress - Non-atomic state operations in NAPI context - Remove unnecessary fields from fast path structures - page-cache micro optimization - Rely on NAPI to avoid missing an IRQ for RX/TX shared NAPI contexts - Stop NAPI when irq changes affinity - Distribute RSS table among all RX rings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Support GRE tunnelsPetr Machata
This patch introduces callbacks and tunnel type to offload GRE tunnels. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Add loopback accessorsPetr Machata
struct mlxsw_sp_rif is a router-private structure, and therefore everything related to it is as well: parameters, and derived RIF types including loopbacks. IPIP module needs access to some details of loopback interfaces, but exporting all the RIF shebang would create too large an interface. So instead export just the bare minimum necessary: accessors for RIF index and underlay VRF ID. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum: Register for IPIP_DECAP_ERROR trapPetr Machata
These traps are generated for packets that fail checks for source IP, encapsulation type, or GRE key. Trap these packets to CPU for follow-up handling by the kernel, which will send ICMP destination unreachable responses. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Use existing decap routePetr Machata
The local route that points at IPIP's underlay device (decap route) can be present long before the GRE device. Thus when an encap route is added, it's necessary to look inside the underlay FIB if the decap route is already present. If so, the current trap offload needs to be withdrawn and replaced with a decap offload. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Support IPv4 underlay decapPetr Machata
Unlike encapsulation, which is represented by a next hop forwarding to an IPIP tunnel, decapsulation is a type of local route. It is created for local routes whose prefix corresponds to the local address of one of offloaded IPIP tunnels. When the tunnel is removed (i.e. all the encap next hops are removed), the decap offload is migrated back to a trap for resolution in slow path. This patch assumes that decap route is already present when encap route is added. A follow-up patch will fix this issue. Note that this patch only supports IPv4 underlay. Support for IPv6 underlay will be subject to follow-up work apart from this patchset. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Support IPv6 overlay encapPetr Machata
Add the missing bits to recognize IPv6 next hops as IPIP ones to enable offloading of IPv6 overlay encapsulation. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Support IPv4 overlay encapPetr Machata
This introduces some common code for tracking of offloaded IP-in-IP tunnels, and support for offloading IPv4 overlay encapsulating routes in particular. A follow-up patch will introduce IPv6 overlay as well. Offloaded tunnels are kept in a linked list of mlxsw_sp_ipip_entry objects hooked up in mlxsw_sp_router. A network device that represents the tunnel is used as a key to look up the corresponding IPIP entry. Note that in the future, more general keying mechanism will be needed, because parts of the tunnel information can be provided by the route. IPIP entries are reference counted, because several next hops may end up using the same tunnel, and we only want to offload it once. Encapsulation path hooks into next hop handling. Routes that forward to a tunnel are now considered gateway routes, thus giving them the same treatment that other remote routes get. An IPIP next hop type is introduced. Details of individual tunnel types are kept in an array of mlxsw_sp_ipip_ops objects. If a tunnel type doesn't match any of the known tunnel types, the next-hop is not considered an IPIP next hop. The list of IPIP tunnel types is currently empty, follow-up patches will add support for GRE. Traffic to IPIP tunnel types that are not explicitly recognized by the driver traps and is handled in slow path. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Make nexthops typedPetr Machata
In the router, some next hops may reference an encapsulating netdevice, such as GRE or IPIP. To properly offload these next hops, mlxsw needs to keep track of whether a given next hop is a regular Ethernet entry, or an IP-in-IP tunneling entry. To facilitate this book-keeping, add a type field to struct mlxsw_sp_nexthop. There is, as of this patch, only one next hop type: MLXSW_SP_NEXTHOP_TYPE_ETH. Follow-up patches will introduce the IP-in-IP variant. There are several places where next hops are initialized in the IPv4 path. Instead of replicating the logic at every one of them, factor it out to a function mlxsw_sp_nexthop4_type_init(). The corresponding fini is actually protocol-neutral, so put it to mlxsw_sp_nexthop_type_fini(), but create a corresponding protocoled _fini function that dispatches to the protocol-neutral one. The IPv6 path is simpler, but for symmetry with IPv4, create the same suite of functions with corresponding logic. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Extract mlxsw_sp_rt6_is_gateway()Petr Machata
IPv6 counterpart of the previous patch: introduce a function to determine whether a given route is a gateway route. The new function takes a mlxsw_sp argument which follow-up patches will use. Thus mlxsw_sp_fib6_entry_type_set() got that argument as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Extract mlxsw_sp_fi_is_gateway()Petr Machata
For IPv4 IP-in-IP offload, routes that direct traffic to IP-in-IP devices need to be considered gateway routes as well. That involves a bit more logic, so extract the current test to a separate function, where the logic can be later added. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Introduce loopback RIFsPetr Machata
When offloading L3 tunnels, an adjacency entry is created that loops the packet back into the underlay router. Loopback interfaces then hold the corresponding information and are created for IP-in-IP netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Support FID-less RIFsPetr Machata
Loopback RIFs, which will be introduced in a follow-up patch, differ from other RIFs in that they do not have a FID associated with them. To support this, demote FID allocation from mlxsw_sp_rif_create to configure op of the existing RIF types, and likewise the FID release from mlxsw_sp_rif_destroy to deconfigure op. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Add mlxsw_sp_ipip_opsPetr Machata
Details of individual tunnel types are kept in an array of mlxsw_sp_ipip_ops objects. Follow-up patches will use the list to determine whether a constructed RIF should be a loopback, and to decide whether a next hop references a tunnel. The list is currently empty, follow-up patches will add support for GRE. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: spectrum_router: Publish mlxsw_sp_l3protoPetr Machata
The spectrum_ipip module that will be introduced in the follow-up patches needs to know the data type. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Give mlxsw_reg_ratr_pack a type parameterPetr Machata
To support IPIP, the driver needs to be able to construct an IPIP adjacency. Change mlxsw_reg_ratr_pack to take an adjacency type as an argument. Adjust the one existing caller. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Extract mlxsw_reg_ritr_mac_pack()Petr Machata
Unlike other interface types, loopback RIFs do not have MAC address. So drop the corresponding argument from mlxsw_reg_ritr_pack() and move it to a new function. Call that from callers of mlxsw_reg_ritr_pack. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Add Routing Tunnel Decap Properties RegisterPetr Machata
The RTDP register is used for configuring the tunnel decap properties of NVE and IPinIP. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Add mlxsw_reg_ralue_act_ip2me_tun_pack()Petr Machata
To implement IP-in-IP decapsulation, Spectrum uses LPM entries of type IP2ME with tunnel validity bit and tunnel pointer set. The necessary register fields are already available, so add a function to pack the RALUE as appropriate. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Move enum mlxsw_reg_ratr_trap_idPetr Machata
This enum is used with reg_ratr_trap_id, so move it next to the register definition. While at it, drop the enumerator initializers. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Update RATR to support IP-in-IP tunnelsPetr Machata
So far, adjacencies have always been of type Ethernet (with value of 0), and thus there was no need to explicitly support RATR type. However to support IP-in-IP adjacencies, this type and a suite of IP-in-IP-specific attributes need to be added. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03mlxsw: reg: Update RITR to support loopback devicePetr Machata
Update the register so that loopback RIFs can be created and loopback properties specified. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: dsa: loop: Do not unregister invalid fixed PHYFlorian Fainelli
During error injection it was possible to crash in dsa_loop_exit() because of an attempt to unregister an invalid PHY. We actually want to the driver probing in dsa_loop_init() even though fixed_phy_register() may return an error to exercise how DSA deals with such cases, but we should not be crashing during driver removal. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03net: mvpp2: fallback using h/w and random mac if the dt one isn't validAntoine Tenart
When using a mac address described in the device tree, a check is made to see if it is valid. When it's not, no fallback is defined. This patches tries to get the mac address from h/w (or use a random one if the h/w one isn't valid) when the dt mac address isn't valid. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 16:26:10 +0000