| Age | Commit message (Collapse) | Author |
|---|
|
vmovp_lock is abused in a number of cases to serialise updates
to vlpi_count[] and deal with map/unmap of a VM to ITSs.
Instead, provide a per-VM lock and revisit the use of vlpi_count[]
so that it is always wrapped in this per-VM vmapp_lock.
This reduces the potential contention on a concurrent VMOVP command,
and paves the way for subsequent VPE locking that holding vmovp_lock
actively prevents due to the lock ordering.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
|
|
There are currently two paths to set the initial affinity of a VPE:
- at activation time on GICv4 without the stupid VMOVP list, and
on GICv4.1
- at map time for GICv4 with VMOVP list
The latter location may end-up modifying the affinity of VPE that is
currently running, making the results unpredictible.
Instead, unify the two paths, making sure to set the initial affinity only
at activation time.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-2-maz@kernel.org
|
|
icssg_prueth.c and icssg_prueth_sr1.c drivers use multiple common .c
files. These common objects are getting added to multiple modules. As a
result when both drivers are enabled in .config, below warning is seen.
drivers/net/ethernet/ti/Makefile: icssg/icssg_common.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_classifier.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_config.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_mii_cfg.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_stats.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_ethtool.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
Fix this by building a new module (icssg.o) for all the common objects.
Both the driver can then depend on this common module.
Some APIs being exported have emac_ as the prefix which may result into
confusion with other existing APIs with emac_ prefix, to avoid
confusion, rename the APIs being exported with emac_ to icssg_ prefix.
This also fixes below error seen when both drivers are built.
ERROR: modpost: "icssg_queue_pop"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
ERROR: modpost: "icssg_queue_push"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/oe-kbuild-all/202405182038.ncf1mL7Z-lkp@intel.com/
Fixes: 487f7323f39a ("net: ti: icssg-prueth: Add helper functions to configure FDB")
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"st,stih416-mpe-thermal" compatible seems to appear nowhere in the
device-tree nor in the documentation.
Remove compatible and related code.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20240708161840.102004-1-rgallaispou@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-12-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-11-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-10-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-9-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-8-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-7-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-6-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-5-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev. While touching devm_kzalloc(), use preferred sizeof(*)
syntax.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-4-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-3-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-2-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface. Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
still registered and accessible to users,
2. devm interface will unregister thermal zone.
This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.
Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.
Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This add suspend-to-ram support.
The derived_table is kept-as is, so the resume is only about
pm_runtime_* calls and restoring the same registers as the probe.
Extract the hardware initialization procedure to a function called at
both probe-time & resume-time.
The probe-time loop is split in two to ensure doing the hardware
initialization before registering thermal zones. That ensures our
callbacks cannot be called while in bad state.
The 100ms delay in the hardware initialization sequence was removed.
It was initially added to be sure the thresholds are programmed before
enabling the interrupt, but in fact it's not needed (tested on J7200
platform).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The R-Car thermal driver depends on OF, describe this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-3-niklas.soderlund+renesas@ragnatech.se
|
|
Move all Renesas thermal drivers to a vendor specific directory.
All drivers are moved verbatim apart from the updated include path for
thermal_hwmon.h.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-2-niklas.soderlund+renesas@ragnatech.se
|
|
edac-updates
* ras/edac-amd-atl:
RAS/AMD/FMPM: Use atl internal.h for INVALID_SPA
RAS/AMD/ATL: Implement DF 4.5 NP2 denormalization
RAS/AMD/ATL: Validate address map when information is gathered
RAS/AMD/ATL: Expand helpers for adding and removing base and hole
RAS/AMD/ATL: Read DRAM hole base early
RAS/AMD/ATL: Add amd_atl pr_fmt() prefix
RAS/AMD/ATL: Add a missing module description
* ras/edac-misc:
EDAC: Add missing MODULE_DESCRIPTION() macros
EDAC/dmc520: Use devm_platform_ioremap_resource()
EDAC/igen6: Add Intel Arrow Lake-U/H SoCs support
EDAC, i10nm: make skx_common.o a separate module
EDAC/skx: Switch to new Intel CPU model defines
EDAC/sb_edac: Switch to new Intel CPU model defines
EDAC, pnd2: Switch to new Intel CPU model defines
EDAC/i10nm: Switch to new Intel CPU model defines
EDAC/ghes: Add missing newline to pr_info() statement
RAS/AMD/ATL: Add missing newline to pr_info() statement
EDAC/thunderx: Remove unused struct error_syndrome
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Use cleanup.h helpers to simplify some code paths.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/851d4180f1df5a10ca6e2feaf429611f1c0ccc88.1720515666.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
function
Fix ill-formed implementation of the platform_profile_omen_get function
introduced by the commit d23430233494 ("platform/x86: hp-wmi: Fix
platform profile option switch bug on Omen and Victus laptops").
platform_profile_omen_get() is .profile_get function that should set
*profile and return 0 on success.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: d23430233494 ("platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops")
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/ZpFnV8w1558BW7iZ@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The newly added driver causes a Kconfig warning:
WARNING: unmet direct dependencies detected for RTC_CLASS
Depends on [n]: !S390 [=y]
Selected by [m]:
- TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y]
The problem here is that it selects entire subsystems, which normal
device drivers should not do. Changes all of these to 'depends on'
instead.
Fixes: dfa556e45ae9e ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Fixes: 90e700fd12b61 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup")
Fixes: ab89fb5fb92c7 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
Fixes: 41bb142a40289 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement single-pair BroadR-Reach modes on bcm5481x PHY by Broadcom.
Create set of functions alternative to IEEE 802.3 to handle
configuration of these modes on compatible Broadcom PHYs.
There is only subset of capabilities supported because of limited
collection of hardware available for the development.
For BroadR-Reach capable PHYs, the LRE (Long Reach Ethernet)
alternative register set is handled. Only bcm54811 PHY is verified,
for bcm54810, there is some support possible but untested. There
is no auto-negotiation of the link parameters (called LDS in the
Broadcom terminology, Long-Distance Signaling) for bcm54811.
It should be possible to enable LDS for bcm54810.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-5-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support AF-XDP for merge mode.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-11-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the process:
1. We may need to copy data to create skb for XDP_PASS.
2. We may need to call xsk_buff_free() to release the buffer.
3. The handle for xdp_buff is difference from the buffer.
If we pushed this logic into existing receive handle(merge and small),
we would have to maintain code scattered inside merge and small (and big).
So I think it is a good choice for us to put the xsk code into an
independent function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-10-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the logic of filling rq with XSK buffers.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-9-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xsk wakeup is used to trigger the logic for xsk xmit by xsk framework or
user.
Virtio-net does not support to actively generate an interruption, so it
tries to trigger tx NAPI on the local cpu.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-8-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch implement the logic of bind/unbind xsk pool to rq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-7-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit separates the function receive_mergeable(),
put the logic of appending frag to the skb as an independent function.
The subsequent commit will reuse it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-6-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit separates the function receive_buf(), then we wrap the logic
of handling the skb to an independent function virtnet_receive_done().
The subsequent commit will reuse it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-5-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch separates two sub-functions from virtnet_tx_resize():
* virtnet_tx_pause
* virtnet_tx_resume
Then the subsequent virtnet_tx_reset() can share these two functions.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-4-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch separates two sub-functions from virtnet_rx_resize():
* virtnet_rx_pause
* virtnet_rx_resume
Then the subsequent reset rx for xsk can share these two functions.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtio net has VIRTIO_XDP_HEADROOM that is equal to
XDP_PACKET_HEADROOM to calculate the headroom for xdp.
But here we should use the macro XDP_PACKET_HEADROOM from bpf.h to
calculate the headroom for xdp. So here we remove the
VIRTIO_XDP_HEADROOM, and use the XDP_PACKET_HEADROOM to replace it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240708112537.96291-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As most of the drivers that depend on ARCH_LAYERSCAPE, make FSL_DPAA
depend on COMPILE_TEST for compilation and testing.
# grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l
29
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dpaa_fq_setup() iterates through the &priv->dpaa_fq_list elements
allocated by dpaa_alloc_all_fqs(). This includes a call to:
if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX))
goto fq_alloc_failed;
which gives us dpaa_max_num_txqs() elements of FQ_TYPE_TX type.
The code block which we are deleting runs after an earlier iteration
through &priv->dpaa_fq_list. So at the end of this iteration (for which
there is no early break), egress_cnt will be unconditionally equal to
dpaa_max_num_txqs().
In other words, dpaa_alloc_all_fqs() has already allocated TX queues for
all possible CPUs and the maximal number of traffic classes, and we've
already iterated once through them all.
The while() condition is dead code, remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dpaa_fq_setup() iterates through the queues allocated by dpaa_alloc_all_fqs()
and saved in &priv->dpaa_fq_list.
The allocation for FQ_TYPE_TX looks as follows:
if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX))
goto fq_alloc_failed;
Thus, iterating again through FQ_TYPE_TX queues in dpaa_fq_setup() and
counting them will never yield an egress_cnt larger than the allocated
size, dpaa_max_num_txqs().
The comparison serves no purpose since it is always true; remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver uses the DPAA_TC_TXQ_NUM and DPAA_ETH_TXQ_NUM macros for TX
queue handling, and they depend on CONFIG_NR_CPUS.
In generic .config files, these can go to very large (8096 CPUs) values
for the systems that DPAA1 is integrated in (1-24 CPUs). We allocate a
lot of resources that will never be used. Those are:
- system memory
- QMan FQIDs as managed by qman_alloc_fqid_range(). This is especially
painful since currently, when booting with CONFIG_NR_CPUS=8096, a
LS1046A-RDB system will only manage to probe 3 of its 6 interfaces.
The rest will run out of FQD ("/reserved-memory/qman-fqd" in the
device tree) and fail at the qman_create_fq() stage of the probing
process.
- netdev queues as alloc_etherdev_mq() argument. The high queue indices
are simply hidden from the network stack after the call to
netif_set_real_num_tx_queues().
With just a tiny bit more effort, we can replace the NR_CPUS
compile-time constant with the num_possible_cpus() run-time constant,
and dynamically allocate the egress_fqs[] and conf_fqs[] arrays.
Even on a system with a high CONFIG_NR_CPUS, num_possible_cpus() will
remain equal to the number of available cores on the SoC.
The replacement is as follows:
- DPAA_TC_TXQ_NUM -> dpaa_num_txqs_per_tc()
- DPAA_ETH_TXQ_NUM -> dpaa_max_num_txqs()
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24
CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in
Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays
of NR_CPUS elements, and these can quickly explode in size, leading to
warnings such as:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning:
stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than]
The problem is twofold:
- Reducing the array size to the boot-time num_possible_cpus() (rather
than the compile-time NR_CPUS) creates a variable-length array,
which should be avoided in the Linux kernel.
- Using NR_CPUS as an array size makes the driver blow up in stack
consumption with generic, as opposed to hand-crafted, .config files.
A simple solution is to use dynamic allocation for num_possible_cpus()
elements (aka a small number determined at runtime).
Link: https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From BlazarI onwards, driver shall append the firmware ID (usually
represents transport type) while constructing the firmware name.
Firmware ID is returned on Intel Read Version command.
The new firmware file name for operational image and ddc file shall be,
ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step-fw_id>.[sfi|ddc]
dmesg snippet from BlazarI pcie product:
......
[17.098858] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-pci.sfi
[17.098871] Bluetooth: hci0: Boot Address: 0x10000800
[17.098872] Bluetooth: hci0: Firmware Version: 214-25.24
[17.158229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[17.158236] Bluetooth: BNEP filters: protocol multicast
[17.158241] Bluetooth: BNEP socket layer initialized
[17.468789] Bluetooth: hci0: Waiting for firmware download to complete
[17.468793] Bluetooth: hci0: Firmware loaded in 361262 usecs
[17.468872] Bluetooth: hci0: Waiting for device to boot
[17.504148] Bluetooth: hci0: Device booted in 34512 usecs
[17.504148] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[17.504682] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-pci.ddc
[17.505380] Bluetooth: hci0: Applying Intel DDC parameters completed
[17.505622] Bluetooth: hci0: Firmware timestamp 2024.25 buildtype 3 build 64726
[17.505624] Bluetooth: hci0: Firmware SHA1: 0x9f4adddc
[17.505838] Bluetooth: hci0: Fseq status: Success (0x00)
[17.505839] Bluetooth: hci0: Fseq executed: 00.00.04.183
[17.505840] Bluetooth: hci0: Fseq BT Top: 00.00.04.183
dmesg snippet from BlazarI usb product:
.......
[14.212072] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-usb.sfi
[14.212091] Bluetooth: hci0: Boot Address: 0x10000800
[14.212093] Bluetooth: hci0: Firmware Version: 79-21.24
[14.262125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[14.262129] Bluetooth: BNEP filters: protocol multicast
[14.262133] Bluetooth: BNEP socket layer initialized
[15.865421] Bluetooth: hci0: Waiting for firmware download to complete
[15.865991] Bluetooth: hci0: Firmware loaded in 1615150 usecs
[15.866017] Bluetooth: hci0: Waiting for device to boot
[15.899934] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[15.899942] Bluetooth: hci0: Device booted in 33139 usecs
[15.900172] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-usb.ddc
[15.901928] Bluetooth: hci0: Applying Intel DDC parameters completed
[15.904993] Bluetooth: hci0: Firmware timestamp 2024.21 buildtype 3 build 63311
[15.904996] Bluetooth: hci0: Firmware SHA1: 0x8b217cf7
[15.908929] Bluetooth: hci0: Fseq status: Success (0x00)
[15.908934] Bluetooth: hci0: Fseq executed: 00.00.04.180
[15.908935] Bluetooth: hci0: Fseq BT Top: 00.00.04.180
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add the support ID 0489:e125 to usb_device_id table for
Realtek RTL8852B chip.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e125 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This handles the timeout error codes sent by the chip as part of the
bootloader signatures during firmware download process.
When the bootloader does not receive a response packet from the host
within a specific time, it adds an error code to the bootloader
signature while requesting for the FW chunk from the same offset.
The host is expected to clear this error code with a NAK, and reply to
only those bootloader signatures which have error code 0.
However, the driver was ignoring this error code and replying with the
firmware chunks instead, which is apparently ignored by the chip and the
chip resends the same bootloader signature with the error code again. This
happens in a loop until the error code self clears and firmware download
proceeds ahead, adding a couple of milliseconds to the total firmware
download time.
Commit 689ca16e5232 was an initial implementation which simply printed
the following line during driver debug:
- FW Download received err 0x04 from chip
This commit adds the expected handling to the error codes.
This error handling is valid for data_req bootloader signatures for V3
and future bootloader versions.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This updates the firmware names of 3 chipsets: w8987, w8997, w9098.
These changes are been done to standardize chip specific firmware
file names to be in sync with firmware names of newer chipsets.
The naming convention for BT-only files would be as follows:
For dual-radio WiFi+BT chipsets:
- <protocol-BT><chip-name>_bt_v<HW-version>.bin
For tri-radio WiFi+BT+15.4 chipsets:
- <protocol-BT><protocol-15.4><chip-name>_bt_v<HW-version>.bin
To maintain backward compatibility, this commit adds a provision to
request older firmware file name, if new firmware file name not found in
/lib/firmware/nxp/.
A new device tree property has been introduced called firmware-name, to
override the hardcoded firmware names (old and new) in the driver.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This new variant needs a different core2_window1 and always uses
beamforming.
The BAR2 also has an offset (RAM start, presumably), so add that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
[sven: rebased, updated some comments, mentioned 4388 in Kconfig]
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
