| Age | Commit message (Collapse) | Author |
|---|
|
After commit db5e653d7c9f ("md: delay choosing sync action to
md_start_sync()"), md_start_sync() will hold 'reconfig_mutex', however,
in order to make sure event_work is done, __md_stop() will flush
workqueue with reconfig_mutex grabbed, hence if sync_work is still
pending, deadlock will be triggered.
Fortunately, former pacthes to fix stopping sync_thread already make sure
all sync_work is done already, hence such deadlock is not possible
anymore. However, in order not to cause confusions for people by this
implicit dependency, delay flushing event_work to dm-raid where
'reconfig_mutex' is not held, and add some comments to emphasize that
the workqueue can't be flushed with 'reconfig_mutex'.
Fixes: db5e653d7c9f ("md: delay choosing sync action to md_start_sync()")
Depends-on: f52f5c71f3d4 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 6624e780a577fc596788 ("ice: split ice_vsi_setup into smaller
functions") has refactored a bunch of code involved in PFR. In this
process, TC queue number adjustment for XDP was lost. Bring it back.
Lack of such adjustment causes interface to go into no-carrier after a
reset, if XDP program is attached, with the following message:
ice 0000:b1:00.0: Failed to set LAN Tx queue context, error: -22
ice 0000:b1:00.0 ens801f0np0: Failed to open VSI 0x0006 on switch 0x0001
ice 0000:b1:00.0: enable VSI failed, err -22, VSI index 0, type ICE_VSI_PF
ice 0000:b1:00.0: PF VSI rebuild failed: -22
ice 0000:b1:00.0: Rebuild failed, unload and reload driver
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously, the ice driver had support for using a handler for bonding
netdev events to ensure that conflicting features were not allowed to be
activated at the same time. While this was still in place, additional
support was added to specifically support SRIOV and LAG together. These
both utilized the netdev event handler, but the SRIOV and LAG feature was
behind a capabilities feature check to make sure the current NVM has
support.
The exclusion part of the event handler should be removed since there are
users who have custom made solutions that depend on the non-exclusion of
features.
Wrap the creation/registration and cleanup of the event handler and
associated structs in the probe flow with a feature check so that the
only systems that support the full implementation of LAG features will
initialize support. This will leave other systems unhindered with
functionality as it existed before any LAG code was added.
Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When creating new VSIs, they are assigned into an aggregator node in the
scheduler tree. Information about which aggregator node a VSI is assigned
into is maintained by the vsi->agg_node structure. In ice_vsi_decfg(), this
information is being destroyed, by overwriting the valid flag and the
agg_id field to zero.
For VF VSIs, this breaks the aggregator node configuration replay, which
depends on this information. This results in VFs being inserted into the
default aggregator node. The resulting configuration will have unexpected
Tx bandwidth sharing behavior.
This was broken by commit 6624e780a577 ("ice: split ice_vsi_setup into
smaller functions"), which added the block to reset the agg_node data.
The vsi->agg_node structure is not managed by the scheduler code, but is
instead a wrapper around an aggregator node ID that is tracked at the VSI
layer. Its been around for a long time, and its primary purpose was for
handling VFs. The SR-IOV VF reset flow does not make use of the standard VSI
rebuild/replay logic, and uses vsi->agg_node as part of its handling to
rebuild the aggregator node configuration.
The logic for aggregator nodes stretches back to early ice driver code from
commit b126bd6bcd67 ("ice: create scheduler aggregator node config and move
VSIs")
The logic in ice_vsi_decfg() which trashes the ice_agg_node data is clearly
wrong. It destroys information that is necessary for handling VF reset,. It
is also not the correct way to actually remove a VSI from an aggregator
node. For that, we need to implement logic in the scheduler code. Further,
non-VF VSIs properly replay their aggregator configuration using existing
scheduler replay logic.
To fix the VF replay logic, remove this broken aggregator node cleanup
logic. This is the simplest way to immediately fix this.
This ensures that VFs will have proper aggregate configuration after a
reset. This is especially important since VFs often perform resets as part
of their reconfiguration flows. Without fixing this, VFs will be placed in
the default aggregator node and Tx bandwidth will not be shared in the
expected and configured manner.
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.
In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.
Fixes: 982f589bde7a ("drm/bridge: ti-sn65dsi86: Update reply on aux failures")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid
|
|
While testing, I happened to notice a random crash that looked like:
Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: drm_dp_dpcd_probe+0x120/0x120
Analysis of drm_dp_dpcd_probe() shows that we pass in a 1-byte buffer
(allocated on the stack) to the aux->transfer() function. Presumably
if the aux->transfer() writes more than one byte to this buffer then
we're in a bad shape.
Dropping into kgdb, I noticed that "aux->transfer" pointed at
ps8640_aux_transfer().
Reading through ps8640_aux_transfer(), I can see that there are cases
where it could write more bytes to msg->buffer than were specified by
msg->size. This could happen if the hardware reported back something
bogus to us. Let's fix this so we never write more than msg->size
bytes. We'll still read all the bytes from the hardware just in case
the hardware requires it since the aux transfer data comes through an
auto-incrementing register.
NOTE: I have no actual way to reproduce this issue but it seems likely
this is what was happening in the crash I looked at.
Fixes: 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.1.I9d1afcaad76a3e2c0ca046dc4adbc2b632c22eda@changeid
|
|
On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.
Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
|
|
The build bots are complaining that the members of struct
spi_engine_message_state are not described. This adds the
proper @name: syntax to the comments to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312182101.QOWovo29-lkp@intel.com/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20231218145348.339470-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.8-1
* Use RAII for locking in the Tangier family of drivers (Raag)
* Update Tangier family of drivers to use new PM helpers (Raag)
The following is an automated git shortlog grouped by driver:
elkhartlake:
- reuse pm_ops from Intel Tangier driver
tangier:
- simplify locking using cleanup helpers
- unexport suspend/resume handles
- use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
|
|
The mtk_dp driver registers a phy device which is handled by the
phy_mtk_dp driver and assumes that the phy probe will complete
synchronously, proceeding to make use of functionality exposed by that
driver right away. This assumption however is false when the phy driver
is built as a module, causing the mtk_dp driver to fail probe in this
case.
Add the phy_mtk_dp module as a pre-dependency to the mtk_dp module to
ensure the phy module has been loaded before the dp, so that the phy
probe happens synchrounously and the mtk_dp driver can probe
successfully even with the phy driver built as a module.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231121142938.460846-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add support for LDO5 regulator. This is used by IPQ9574 USB.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Rule: <add>
Link: https://lore.kernel.org/stable/20231214104052.3267039-1-quic_varada%40quicinc.com
Link: https://msgid.link/r/20231214104052.3267039-1-quic_varada@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Passing PMC_IDX_MAIN in pmc_core_pmc_add() adds only primary pmc to pmcdev.
Use pmc_idx instead to add all available pmcs.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011702.1976408-1-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Lunar Lake M PMT telemetry support.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216005146.1735455-1-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231215112746.13752-1-colin.i.king@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The pipe DMC seems to be making a mess of things in ADL. Various weird
symptoms have been observed such as missing vblank irqs, typicalle
happening when using multiple displays.
Keep all pipe DMC event handlers disabled until needed (which is never
atm). This is also what Windows does on ADL+.
We can also drop DG2 from disable_all_flip_queue_events() since
on DG2 the pipe DMC is the one that handles the flip queue events.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8685
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211213750.27109-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 648d7be8ecf47b0556e32550145c70db153b16fb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Select the HDMI specific PLL clock only for HDMI outputs.
Fixes: 62618c7f117e ("drm/i915/mtl: C20 PLL programming")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213220526.1828827-1-imre.deak@intel.com
(cherry picked from commit 937d02cc79c6828fef28a4d80d8d0ad2f7bf2b62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently async flips are busted when bigjoiner is in use.
As a short term fix simply reject async flips in that case.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9769
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081134.2698-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit e93bffc2ac0a833b42841f31fff955549d38ce98)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Updated i915 hwmon with fixes for issues reported by static analysis tool.
Fixed integer overflow with upcasting.
v2:
- Added Fixes tag (Badal).
- Updated commit message as per review comments (Anshuman).
Fixes: 4c2572fe0ae7 ("drm/i915/hwmon: Expose power1_max_interval")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204144809.1518704-1-karthik.poosa@intel.com
(cherry picked from commit ac3420d3d428443a08b923f9118121c170192b62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we get bigjoiner config after the dsc get config, during HW
readout.
Since dsc_get_config now uses bigjoiner flags/pipes to compute DSC PPS
parameter pic_width, this results in a state mismatch when Bigjoiner
and DSC are used together.
So call get bigjoiner config before calling dsc get config function.
Fixes: 8b70b5691704 ("drm/i915/vdsc: Fill the intel_dsc_get_pps_config function")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122064627.905828-1-ankit.k.nautiyal@intel.com
(cherry picked from commit baf31a20fa7f3538d68ffa5262a715eb1d699cdd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes: 2bcef4529222 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ThinkPad systems
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
There is a few things done:
- include only the headers we are direct user of
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next
Tag for the device_is_big_endian() addition to property.h
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes policy binary retrieved from the BIOS maybe incorrect that can
end up in failing to enable the Smart PC solution feature.
Use print_hex_dump_debug() to dump the policy binary in hex, so that we
debug the issues related to the binary even before sending that to TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-13-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A policy binary is OS agnostic, and the same policies are expected to work
across the OSes. At times it becomes difficult to debug when the policies
inside the policy binaries starts to misbehave. Add a way to sideload such
policies independently to debug them via a debugfs entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-12-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It seems reasonable to collect the core parts for the generic PM domain,
along with its corresponding provider drivers. Therefore let's move the
files from drivers/base/power/ to drivers/pmdomain/ and while at it, let's
also rename the files accordingly.
Moreover, let's also update MAINTAINERS to reflect the update.
Cc: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231213113305.29098-1-ulf.hansson@linaro.org
|
|
The "power.h" is no longer needed by genpd, so let's simply drop the
include of it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231213113245.29075-1-ulf.hansson@linaro.org
|
|
PMF driver sends constant inputs to TA which its gets via the other
subsystems in the kernel. To debug certain TA issues knowing what inputs
being sent to TA becomes critical. Add debug facility to the driver which
can isolate Smart PC and TA related issues.
Also, make source_as_str() as non-static function as this helper is
required outside of sps.c file.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add amd_pmf prefix to source_as_str() function, so that the function name
does not look generic. As this is a helper function make it as non-static
so that it can be reused across multiple PMF features.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-10-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver based on the output actions from the TA can request to update
the system states like entering s0i3, lock screen etc. by generating
an uevent. Based on the udev rules set in the userspace the event id
matching the uevent shall get updated accordingly using the systemctl.
Sample udev rules under Documentation/admin-guide/pmf.rst.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
P3T (Peak Package Power Limit) is a metric within the SMU controller
that can influence the power limits. Add support from the driver
to update P3T limits accordingly.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver sends changing inputs from each subystem to TA for evaluating
the conditions in the policy binary.
Add initial support of plumbing in the PMF driver for Smart PC to get
information from other subsystems in the kernel.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To sideload pmf policy binaries, the Smart PC Solution Builder provides a
debugfs file called "update_policy"; that gets created under a new debugfs
directory called "pb" and this new directory has to be associated with
existing parent directory for PMF driver called "amd_pmf".
In the current code structure, amd_pmf_dbgfs_register() is called after
amd_pmf_init_features(). This will not help when the Smart PC builder
feature has to be assoicated to the parent directory.
Hence change the order of amd_pmf_dbgfs_register() and call it before
amd_pmf_init_features() so that when the Smart PC init happens, it has the
parent debugfs directory to get itself hooked.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF Policy binary is a encrypted and signed binary that will be part
of the BIOS. PMF driver via the ACPI interface checks the existence
of Smart PC bit. If the advertised bit is found, PMF driver walks
the acpi namespace to find out the policy binary size and the address
which has to be passed to the TA during the TA init sequence.
The policy binary is comprised of inputs (or the events) and outputs
(or the actions). With the PMF ecosystem, OEMs generate the policy
binary (or could be multiple binaries) that contains a supported set
of inputs and outputs which could be specifically carved out for each
usage segment (or for each user also) that could influence the system
behavior either by enriching the user experience or/and boost/throttle
power limits.
Once the TA init command succeeds, the PMF driver sends the changing
events in the current environment to the TA for a constant sampling
frequency time (the event here could be a lid close or open) and
if the policy binary has corresponding action built within it, the
TA sends the action for it in the subsequent enact command.
If the inputs sent to the TA has no output defined in the policy
binary generated by OEMs, there will be no action to be performed
by the PMF driver.
Example policies:
1) if slider is performance ; set the SPL to 40W
Here PMF driver registers with the platform profile interface and
when the slider position is changed, PMF driver lets the TA know
about this. TA sends back an action to update the Sustained
Power Limit (SPL). PMF driver updates this limit via the PMFW mailbox.
2) if user_away ; then lock the system
Here PMF driver hooks to the AMD SFH driver to know the user presence
and send the inputs to TA and if the condition is met, the TA sends
the action of locking the system. PMF driver generates a uevent and
based on the udev rule in the userland the system gets locked with
systemctl.
The intent here is to provide the OEM's to make a policy to lock the
system when the user is away ; but the userland can make a choice to
ignore it.
The OEMs will have an utility to create numerous such policies and
the policies shall be reviewed by AMD before signing and encrypting
them. Policies are shared between operating systems to have seemless user
experience.
Since all this action has to happen via the "amdtee" driver, currently
there is no caller for it in the kernel which can load the amdtee driver.
Without amdtee driver loading onto the system the "tee" calls shall fail
from the PMF driver. Hence an explicit MODULE_SOFTDEP has been added
to address this.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the current code, the metrics table information was required only
for auto-mode or CnQF at a given time. Hence keeping the return type
of amd_pmf_set_dram_addr() as static made sense.
But with the addition of Smart PC builder feature, the metrics table
information has to be shared by the Smart PC also and this feature
resides outside of core.c.
To make amd_pmf_set_dram_addr() visible outside of core.c make it
as a non-static function and move the allocation of memory for
metrics table from amd_pmf_init_metrics_table() to amd_pmf_set_dram_addr()
as amd_pmf_set_dram_addr() is the common function to set the DRAM
address.
Add a suspend handler that can free up the allocated memory for getting
the metrics table information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF TA (Trusted Application) loads via the TEE environment into the
AMD ASP.
PMF-TA supports two commands:
1) Init: Initialize the TA with the PMF Smart PC policy binary and
start the policy engine. A policy is a combination of inputs and
outputs, where;
- the inputs are the changing dynamics of the system like the user
behaviour, system heuristics etc.
- the outputs, which are the actions to be set on the system which
lead to better power management and enhanced user experience.
PMF driver acts as a central manager in this case to supply the
inputs required to the TA (either by getting the information from
the other kernel subsystems or from userland)
2) Enact: Enact the output actions from the TA. The action could be
applying a new thermal limit to boost/throttle the power limits or
change system behavior.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
PMF Trusted Application is a secured firmware placed under
/lib/firmware/amdtee gets loaded only when the TEE environment is
initialized. Add the initial code path to build these pipes.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
After switching to directly using dma_fence instead of i915_sw_fence we
have left some dead code around intel_atomic_helper->free_list. Remove that
dead code.
v2: Remove intel_atomic_state->freed as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114134141.2527694-1-jouni.hogander@intel.com
|
|
To help with debugging print out the mmio list contained in the DMC
firmware. Also highlight the event registers, and whether we're going
to disable them or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211213750.27109-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Unlike later platforms TGL/ADLS has the half refresh rate (HRR) event
on the main DMC (as opposed to the pipe DMC). Since we're disabling
that event on all later platforms already let's do the same on
TGL/ADLS as well.
There is supposedly a bit somewhere (DMC_CHICKEN on TGL) to make
the handler not do anything, but we don't currently have code
to frob it. Though that bit should be off by default, the ADL+
experience has shown us that trusting any of this isn't a good
idea. So seems safer to just disable all event handlers we know
that we don't need.
Also the TGL/ADLS DMC firmware is apparently using the wrong event
(undelayed vblank) here anyway. It should be using the delayed
vblank event instead (like ADL+ firmware does), but they didn't
release a firmware fix for this and instead just hacked around
this in the Windows driver code :/
v2: Also disable the event on ADLS (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213150807.21331-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Unlike later platforms TGL has its flip queue event (CLK_MSEC) on
the main DMC (as opposed to the pipe DMC). Currently we're doing
a second pass to disable that, but let's just follow the same
approach as the later platforms and never even enable the event
in the first place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211213750.27109-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
The pipe DMC seems to be making a mess of things in ADL. Various weird
symptoms have been observed such as missing vblank irqs, typicalle
happening when using multiple displays.
Keep all pipe DMC event handlers disabled until needed (which is never
atm). This is also what Windows does on ADL+.
We can also drop DG2 from disable_all_flip_queue_events() since
on DG2 the pipe DMC is the one that handles the flip queue events.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8685
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211213750.27109-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
The global list of GPIO devices is never modified or accessed from
atomic context so it's fine to protect it using a mutex. Add a new
global lock dedicated to the gpio_devices list and use it whenever
accessing or modifying it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Rename two functions that read or modify the global GPIO device list but
don't take the lock themselves (and need to be called with it already
acquired). Use the _unlocked() suffix which seems to be used quite
consistently across the kernel despite there also existing the _locked()
suffix for the same purpose.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
