| Age | Commit message (Collapse) | Author |
|---|
|
We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes. For consistency,
let's settle on "XEHP_" as the preferred form.
XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz@caztech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com
|
|
XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were
duplicated between i915_reg.h and intel_gt_regs.h. These are all GT
registers, so we should drop the copy from i915_reg.h.
XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs
in intel_gt_regs.h. Move it.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-1-matthew.d.roper@intel.com
|
|
Add plane color encoding information for color space conversion.
It's a preparation for adding support for mt8195 ovl_adaptor mdp_rdma
csc control.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-10-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add merge async reset control in mtk_merge_stop. Async hw doesn't do self
reset on each sof signal(start of frame), so need to reset the async to
clear the hw status for the next merge start.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-8-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add merge mute/unmute setting for MT8195.
MT8195 Vdosys1 merge1~merge4 support HW mute function.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-7-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add merge start/stop API for cmdq support. The ovl_adaptor merges
are configured with each drm plane update. Need to enable/disable
merge with cmdq making sure all the settings taken effect in the
same vblank.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-6-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add merge new advance config API. The original merge API is
mtk_ddp_comp_funcs function prototype. The API interface parameters
cannot be modified, so add a new config API for extension. This is
the preparation for ovl_adaptor merge control.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-5-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add MDP_RDMA driver for MT8195. MDP_RDMA is the DMA engine of
the ovl_adaptor component.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220620091930.27797-4-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The recent change to split reads into chunks has several problems:
1. If an SPI controller has no transfer size limit, max_chunk is
SIZE_MAX, and num_msgs becomes zero, causing no data to be read
into the buffer, and exposing the original contents of the buffer
to userspace,
2. If the requested read size is not a multiple of the maximum
transfer size, the last transfer reads too much data, overflowing
the buffer,
3. The loop logic differs from the write case.
Fix the above by:
1. Keeping track of the number of bytes that are still to be
transferred, instead of precalculating the number of messages and
keeping track of the number of bytes tranfered,
2. Calculating the transfer size of each individual message, taking
into account the number of bytes left,
3. Switching from a "while"-loop to a "do-while"-loop, and renaming
"msg_count" to "segment".
While at it, drop the superfluous cast from "unsigned int" to "unsigned
int", also from at25_ee_write(), where it was probably copied from.
Fixes: 0a35780c755ccec0 ("eeprom: at25: Split reads into chunks and cap write size")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ideapad_dytc_v4_allow_table[]
The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile
control. This has been tested successfully with the ideapad-laptop
DYTC version 5 code; Add the Ideapad 5 15ITL05 to the
ideapad_dytc_v4_allow_table[].
Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
|
|
Add an allow_v4_dytc module parameter to allow users to easily test if
DYTC version 4 platform-profiles work on their laptop.
Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com
|
|
The latest hardware version (0x40100) supports a hardware threshold
register (aka FUTR) to trigger a fifo underrun interrupt.
A software threshold has been implemented for other hardware versions.
The threshold is set to 128 by default.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134654.594373-1-yannick.fertre@foss.st.com
|
|
Support of vertical & horizontal mirroring features thanks to
the plane rotation property.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134547.593790-1-yannick.fertre@foss.st.com
|
|
Zpos property is immutable for all hardware versions except the last
version (0x40100) which support the blending order feature
(dynamic z-order).
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134459.593379-1-yannick.fertre@foss.st.com
|
|
Fix issues reported by checkpatch.pl:
- Braces {} should be used on all arms
- Blank lines
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134334.592805-1-yannick.fertre@foss.st.com
|
|
Remove error message about scaling & replace it by a debug
message to avoid too much error.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134250.592408-1-yannick.fertre@foss.st.com
|
|
All plans must be disabled before the CRTC shutdown helping
the crtc to restart from a clean situation (without unwanted
planes already enable).
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134151.591997-1-yannick.fertre@foss.st.com
|
|
Commit 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711")
introduced a check in vc4_perfmon_get() that dereferences a pointer before
we checked whether that pointer is valid or not.
Let's rework that function a bit to do things in the proper order.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622080243.22119-1-maxime@cerno.tech
|
|
Add some spaces to vring_alloc_queue(make it look prettier).
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220622192306.4371-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
we call vhost_vdpa_iotlb_free() during the release to clean all regions
mapped in the iotlb.
That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup()
to do some cleanup, including deleting all mappings, but we forgot to call
it in vhost_vdpa_release().
This causes that if an application does not remove all mappings explicitly
(or it crashes), the mappings remain in the iotlb and subsequent
applications may fail if they map the same addresses.
Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not
freeing `v->vdev.vqs` during the release from the same commit.
Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its
call from vhost_vdpa_release().
Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220622151407.51232-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.
This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.
This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.
Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We currently depend on probe() calling virtio_device_ready() -
which happens after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 0d2e1a2926b18 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220620051115.3142-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We currently call virtio_device_ready() after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 4baf1e33d0842 ("virtio_net: enable VQs early")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220617072949.30734-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For imported dma-buf objects we leave the object as cache_coherent = 0
across all platforms, which is reasonable given that have no clue what
the memory underneath is, and its not like the driver can ever manually
clflush the pages anyway (like with i915_gem_clflush_object) for such
objects. However on discrete we choose to treat cache_dirty = true as a
programmer error, leading to a warning. The simplest fix looks to be to
just change the ordering in cpu_write_needs_clflush to prevent ever
setting cache_dirty for dma-buf objects on discrete.
Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com
|
|
Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-3-jose.exposito89@gmail.com
|
|
Currently i915 disables d3cold for i915 pci dev.
This blocks D3 for i915 gfx pci upstream bridge (VSP).
Let's disable d3cold at gfx root port to make sure that
i915 gfx VSP can transition to D3 to save some power.
We don't need to disable/enable d3cold in rpm, s2idle
suspend/resume handlers. Disabling/Enabling d3cold at
gfx root port in probe/remove phase is sufficient.
Fixes: 1a085e23411d ("drm/i915: Disable D3Cold in s2idle and runtime pm")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by:: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com
|
|
Some protocols check the response size with the expected value but optee
shared memory doesn't return such size whereas it is available in the
optee output buffer.
As an example, the base protocol compares the response size with the
expected result when requesting the list of protocol which triggers a
warning with optee shared memory:
arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4)
Save the output buffer length and use it when fetching the answer.
Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Some Allwinner SoCs have 2 pinctrls (PIO and R_PIO).
Previous implementation used absolute pin numbering and it was incorrect
for R_PIO pinctrl.
It's necessary to take into account the base pin number.
Fixes: 90be64e27621 ("pinctrl: sunxi: implement pin_config_set")
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220525190423.410609-1-andrey.lalaev@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
As the CRTC requires a primary plane for display, ensure that the
primary plane is enabled with the CRTC.
Use drm_atomic_helper_check_crtc_state(). Add all affected planes
to the atomic state so that their state will be checked as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-4-tzimmermann@suse.de
|
|
Simple-KMS helpers guarantee that the CRTC and plane enable
flags are synchronized. Implement this with atomic helpers
drm_atomic_helper_check_crtc_state() on the CRTC side, and
drm_atomic_helper_check_plane_state() on the plane side.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-3-tzimmermann@suse.de
|
|
Add drm_atomic_helper_check_crtc_state(), which contains tests common
to many CRTCs. The first added test verifies that an enabled CRTC has
at least one enabled primary plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-2-tzimmermann@suse.de
|
|
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name.
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 67b723f5b742 ("drm/fb-helper: Calculate damaged area in separate helper")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v5.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20220621104617.8817-1-tzimmermann@suse.de
|
|
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
v3:
* call aperture_remove_conflicting_pci_devices()
Reported-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-4-tzimmermann@suse.de
|
|
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
|
|
With an AST2600, the screen is garbage when going out of suspend.
This is because color settings are lost, and not restored on resume.
Force the color settings on DPMS_ON, to make sure the settings are correct.
I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
https://www.aspeedtech.com/support_driver/
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622124815.356035-1-jfalempe@redhat.com
|
|
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525115411.65455-1-linmq006@gmail.com
|
|
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 455cd867b85b ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
nvsw_sn2201_create_static_devices()
This should return PTR_ERR() instead of IS_ERR(). Also "dev->client"
has been set to NULL by this point so it returns 0/success so preserve
the error code earlier.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Alder Lake N (ADL-N) to the list of the platforms that Intel's
PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and
documentation updates to the cirrusfb, skeletonfb, omapfb,
intelfb, au1100fb and simplefb drivers"
* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Remove duplicate 'the' in comment
video: fbdev: omapfb: Align '*' in comment
video: fbdev: simplefb: Check before clk_put() not needed
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
video: fbdev: skeletonfb: Convert to generic power management
video: fbdev: cirrusfb: Remove useless reference to PCI power management
video: fbdev: intelfb: Initialize value of stolen size
video: fbdev: intelfb: Use aperture size from pci_resource_len
video: fbdev: skeletonfb: Fix syntax errors in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc4
for a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: check request status before setting device address
USB: gadget: Fix double-free bug in raw_gadget driver
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci: turn off port power in shutdown
xhci: Keep interrupt disabled in initialization until host is running.
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
usb: gadget: uvc: fix list double add in uvcg_video_pump
dt-bindings: usb: ehci: Increase the number of PHYs
dt-bindings: usb: ohci: Increase the number of PHYs
usb: gadget: Fix non-unique driver names in raw-gadget driver
MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
USB: serial: option: add Telit LE910Cx 0x1250 composition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different
model
- documentation fixes
- MAINTAINERS file updates
* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mxs: Fix header comment
gpio: Fix kernel-doc comments to nested union
gpio: grgpio: Fix device removing
gpio: winbond: Fix error code in winbond_gpio_get()
gpio: realtek-otto: Make the irqchip immutable
docs: driver-api: gpio: Fix filename mismatch
MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM
|
|
Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.
Since we don't read and clear the RCSR register, we should disable this
interrupt.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When unplugging an Ethernet cable, false carrier events were produced by
the PHY at a very high rate. Once the false carrier counter full, an
interrupt was triggered every few clock cycles until the cable was
replugged. This resulted in approximately 10k/s interrupts.
Since the false carrier counter (FCSCR) is never used, we can safely
disable this interrupt.
In addition to improving performance, this also solved MDIO read
timeouts I was randomly encountering with an i.MX8 fec MAC because of
the interrupt flood. The interrupt count and MDIO timeout fix were
tested on a v5.4.110 kernel.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot found a race between tun file and device destruction.
NAPIs live in struct tun_file which can get destroyed before
the netdev so we have to del them explicitly. The current
code is missing deleting the NAPI if the queue was detached
first.
Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver")
Reported-by: syzbot+b75c138e9286ac742647@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220623042039.2274708-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
