summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-13memory: pl353: Add driver for arm pl353 static memory controllerNaga Sureshkumar Relli
Add driver for arm pl353 static memory controller. This controller is used in Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-13rtlwifi: rtl8821ae: remove set but not used variable 'type' in ↵YueHaibing
translate_rx_signal_stuff Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c: In function 'translate_rx_signal_stuff': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c:309:6: warning: variable 'type' set but not used [-Wunused-but-set-variable] It never used since commit 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13switchtec: Add MRPC DMA mode supportWesley Sheng
MRPC normal mode requires the host to read the MRPC command status and output data from BAR. This results in high latency responses from the Memory Read TLP and potential Completion Timeout (CTO). Add support for MRPC DMA mode, including related macro definitions and data structures and code to: * Retrieve MRPC DMA mode version from adapter firmware * Allocate DMA buffer, register ISR, and enable DMA during init * Check MRPC execution status and get execution results from DMA buffer * Release DMA buffer and disable DMA function when unloading module MRPC DMA mode is a new feature of firmware, and the driver will fall back to MRPC normal mode if there is no support in the legacy firmware. Add a module parameter, "use_dma_mrpc", to select between MRPC DMA mode and MRPC normal mode. Since the driver automatically detects DMA support in the firmware, this parameter is just for debugging and testing. Include <linux/io-64-nonatomic-lo-hi.h> so that readq/writeq is replaced by two readl/writel on systems that do not support it. Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> [bhelgaas: changelog, simplify dma_ver check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-12-13switchtec: Improve MRPC efficiency by enabling write combiningKelvin Cao
The MRPC Input buffer is mostly memory without any side effects, so we can improve the access time by enabling write combining on this region of the BAR. In a few places, we still need to flush the WC buffer. To do this, we simply read from the Outbound Doorbell register because reads to this register are processed by low latency hardware. Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-12-13rtl818x: fix potential use after freePan Bian
entry is released via usb_put_urb just after calling usb_submit_urb. However, entry is used if the submission fails, resulting in a use after free bug. The patch fixes this. Signed-off-by: Pan Bian <bianpan2016@163.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13b43: remove set but not used variables 'tx_pwr_state,tmp2'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/b43/phy_n.c: In function 'b43_nphy_op_recalc_txpower': drivers/net/wireless/broadcom/b43/phy_n.c:5898:7: warning: variable 'tx_pwr_state' set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/b43/phy_n.c:6047:20: warning: variable 'tmp2' set but not used [-Wunused-but-set-variable] 'tx_pwr_state' never used since introduction in commit 8615eb2870f1 ("b43: N-PHY: support setting custom TX power") 'tmp2' not used any more since commit c002831a07dd ("b43: N-PHY: use helper for checking IPA") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: fix false-positive -Wmaybe-unintialized warningArnd Bergmann
When CONFIG_NO_AUTO_INLINE is set, we get a false-postive warning for the brcmf_fw_request_nvram_done() function, after gcc figures out that brcmf_fw_nvram_from_efi() might not set the 'data_len' variable, but fails to notice that it always returns NULL: drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c: In function 'brcmf_fw_request_nvram_done': drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:560:11: error: 'data_len' may be used uninitialized in this function [-Werror=maybe-uninitialized] Mark it 'inline' to force gcc to understand this. Fixes: ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: disable command decode in sdio_aosWright Feng
AOS is a part of the SDIOD core that becomes active when the rest of SDIOD is sleeping to keep SDIO bus alive responding to reduced set of commands. Transaction between AOS and SDIOD is not protected, and if cmd 52 is received in AOS and in the middle of response state changed from AOS to SDIOD, response is corrupted and it causes to SDIO Host controller to hang. Command decode for below chips are disabled in this commit: - 4339 - 4345 - 4354 - 4373 Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: 4373 save-restore supportChi-Hsien Lin
Use chipcommon sr_control0 register to check 4373 sr support. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: update 43012 F2 watermark setting to fix DMA Error during UDP RX ↵Naveen Gupta
Traffic The number of words that the read FIFO has to contain except the end of frame before sends data back to the host. Max watermark = (512B - 2* (BurstLength))/4 = (512 - 128)/4 = 384/4 = 0x60 so if burst length (i.e. BurstLength = 64) is increased, watermark has to be reduced. This is the optimal setting for this chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Naveen Gupta <naveen.gupta@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: allow GCI core enumurationChi-Hsien Lin
GCI core is needed for ULP operation. Allow GCI core enumuration with below changes: - Allow GCI to be added to core list even when it doesn't have a wrapper. - Allow 8K address space size. - Don't overwrite the address value when an additional size descriptor is in place. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add support for CYW43012 SDIO chipsetChi-Hsien Lin
CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It is an Ultra Low Power WLAN+BT combo chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373Madhan Mohan R
Along with F2 watermark (existing) configuration, F1 MesBusyCtrl should be enabled & sdio device RX FIFO watermark should be configured to avoid overflow errors. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set F2 watermark to 256 for 4373Wright Feng
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional throughput test. Enable watermark to 256 to guarantee the operation stability. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add 4354 raw pcie device idWinnie Chang
Add the raw 4354 PCIe device ID for unprogrammed Cypress boards. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Winnie Chang <winnie.chang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: handle compressed tx status signalChung-Hsien Hsu
Firmware inform the driver about tx status by normal tx status signal or compressed tx status signal. This patch adds support to handle the compressed tx status signal. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: enable frameburst mode in default firmware settingWright Feng
The frameburst feature can enable per-packet framebursting in firmware side and get higher TX throughput in High Throughput(HT) mode. To enhance TX throughput, we enable frameburst mode in default firmware setting. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add credit numbers updating supportWright Feng
The credit numbers are static and tunable per chip in firmware side. However the credit number may be changed that is based on packet pool length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver updates the credit numbers during interface up. The purpose of this patch is making host driver has ability of updating the credit numbers when receiving the BRCMF_E_FIFO_CREDIT_MAP event. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: add NL80211_STA_INFO_RX_BITRATE supportBrian Norris
Comparing the existing TX_BITRATE parsing code (in mwifiex_parse_htinfo()) with the RX bitrate histograms in debugfs.c, it appears that the rxpd_rate and rxpd_htinfo fields have the same format. At least, they give reasonable results when I parse them this way. So this patch adds support for RX_BITRATE to our station info dump. Along the way, I add legacy bitrate parsing into the same function, using the debugfs code (mwifiex_histogram_read() and mwifiex_adjust_data_rate()) as reference. Additionally, to satisfy the requirements of NL80211_STA_INFO_RX_BITRATE, I skip logging the bitrate of multicast packets. This shouldn't add a lot of overhead to the RX path, as there are already several similar 802.3 header checks in this same codepath. We can also bias the branch behavior to favor unicast, as that's the common performance-sensitive case. I'd consider this support somewhat experimental, as I have zero documentation from Marvell. But the existing driver code gives me good reason to think this is correct. I've tested this on a few different 802.11{a,b,g,n,ac} networks, and the reported bitrates look good to me. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: refactor mwifiex_parse_htinfo() for reuseBrian Norris
This function converts some firmware-specific parameters into cfg80211 'rate_info' structures. It currently assumes it's dealing only with TX bitrate, but the RX bitrate looks to be the same, so refactor this function to be reusable. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: debugfs: correct histogram spacing, formattingBrian Norris
Currently, snippets of this file look like: rx rates (in Mbps): 0=1M 1=2M2=5.5M 3=11M 4=6M 5=9M 6=12M 7=18M 8=24M 9=36M 10=48M 11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40) 44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80) ... noise_flr[--96dBm] = 22 noise_flr[--95dBm] = 149 noise_flr[--94dBm] = 9 noise_flr[--93dBm] = 2 We're missing some spaces, and we're adding a minus sign ('-') on values that are already negative signed integers. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: fix potential NULL dereference and use after freePan Bian
There are two defects: (1) passing a NULL bss to mwifiex_save_hidden_ssid_channels will result in NULL dereference, (2) using bss after dropping the reference to it via cfg80211_put_bss. To fix them, the patch moves the buggy code to the branch that bss is not NULL and puts it before cfg80211_put_bss. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mt76: fix potential NULL pointer dereference in mt76_stop_tx_queuesLorenzo Bianconi
Starting from mac80211 commit adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames") and commit 0eeb2b674f05 ("mac80211: add an option for station management TXQ") a new per-sta queue has been introduced for bufferable management frames. sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports the following hw flags: - IEEE80211_HW_STA_MMPDU_TXQ - IEEE80211_HW_BUFF_MMPDU_TXQ This can produce a NULL pointer dereference in mt76_stop_tx_queues since mt76 iterates on all available sta tx queues assuming they are initialized by mac80211. This issue has been spotted analyzing the code (it has not triggered any crash yet) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13Merge tag 'mt76-for-kvalo-2018-11-30' of https://github.com/nbd168/wirelessKalle Valo
first batch of mt76 patches for 4.21 * use the same firmware for mt76x2e and mt76x2u * mt76x2 fixes * mt76x0 fixes * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 kvalo: fixed a conflict in drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c and a build problem in drivers/net/wireless/mediatek/mt76/mt76x02_util.c
2018-12-13Revert "mwifiex: restructure rx_reorder_tbl_lock usage"Brian Norris
This reverts commit 5188d5453bc9380ccd4ae1086138dd485d13aef2, because it introduced lock recursion: BUG: spinlock recursion on CPU#2, kworker/u13:1/395 lock: 0xffffffc0e28a47f0, .magic: dead4ead, .owner: kworker/u13:1/395, .owner_cpu: 2 CPU: 2 PID: 395 Comm: kworker/u13:1 Not tainted 4.20.0-rc4+ #2 Hardware name: Google Kevin (DT) Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] Call trace: dump_backtrace+0x0/0x140 show_stack+0x20/0x28 dump_stack+0x84/0xa4 spin_bug+0x98/0xa4 do_raw_spin_lock+0x5c/0xdc _raw_spin_lock_irqsave+0x38/0x48 mwifiex_flush_data+0x2c/0xa4 [mwifiex] call_timer_fn+0xcc/0x1c4 run_timer_softirq+0x264/0x4f0 __do_softirq+0x1a8/0x35c do_softirq+0x54/0x64 netif_rx_ni+0xe8/0x120 mwifiex_recv_packet+0xfc/0x10c [mwifiex] mwifiex_process_rx_packet+0x1d4/0x238 [mwifiex] mwifiex_11n_dispatch_pkt+0x190/0x1ac [mwifiex] mwifiex_11n_rx_reorder_pkt+0x28c/0x354 [mwifiex] mwifiex_process_sta_rx_packet+0x204/0x26c [mwifiex] mwifiex_handle_rx_packet+0x15c/0x16c [mwifiex] mwifiex_rx_work_queue+0x104/0x134 [mwifiex] worker_thread+0x4cc/0x72c kthread+0x134/0x13c ret_from_fork+0x10/0x18 This was clearly not tested well at all. I simply performed 'wget' in a loop and it fell over within a few seconds. Fixes: 5188d5453bc9 ("mwifiex: restructure rx_reorder_tbl_lock usage") Cc: <stable@vger.kernel.org> Cc: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13rtlwifi: Fix leak of skb when processing C2H_BT_INFOLarry Finger
With commit 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO"), calling rtl_c2hcmd_enqueue() with rtl_c2h_fast_cmd() true, the routine returns without freeing that skb, thereby leaking it. This issue has been discussed at https://github.com/lwfinger/rtlwifi_new/issues/401 and the fix tested there. Fixes: 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO") Reported-and-tested-by: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13Merge tag 'intel-pinctrl-v4.21-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v4.21-1 Switch to generic ->probe() callbacks. Simplify getting .driver_data. Code formatting fixes and headers clean up. Special case is the driver for Intel Cherryview SoC, where GPIO enabling bit was mistakenly cleared when pin gets freed. It's fixed now. The below commit went to v4.20-rc3, that's why duplication. - ad774315c3765ffb27abb6db987a2121d871a942 MAINTAINERS: Add tree link for Intel pin control driver The following is an automated git shortlog grouped by driver: baytrail: - Code formatting fixes - simplify getting .driver_data broxton: - Code formatting fixes - Get rid of unneeded ->probe() stub cannonlake: - Code formatting fixes - Get rid of unneeded ->probe() stub cedarfork: - Replace acpi.h with mod_devicetable.h - Get rid of unneeded ->probe() stub cherryview: - Stop clearing the GPIO_EN bit from chv_gpio_disable_free - Add chv_gpio_clear_triggering() helper function - simplify getting .driver_data denverton: - Replace acpi.h with mod_devicetable.h - Get rid of unneeded ->probe() stub geminilake: - Code formatting fixes icelake: - Code formatting fixes - Get rid of unneeded ->probe() stub intel: - Unexport intel_pinctrl_probe() - simplify getting .driver_data lewisburg: - Replace acpi.h with mod_devicetable.h - Get rid of unneeded ->probe() stub MAINTAINERS: - Add tree link for Intel pin control driver merrifield: - include bits.h instead of bitops.h sunrisepoint: - Get rid of unneeded ->probe() stub
2018-12-13Merge tag 'iio-for-4.21b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups for the 4.21 cycle. Staging graduation * ad2s90 - Driver for this resolver to digital chip. New drivers and device support. * ad5686 - Add support for ad5310r DAC and associated fix in value read back. * exynos-adc - Support for S5PV210 which is slightly different from other parts. * mcp41010 - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and MCP42100 microchip potentiometers. New ACPI ids. * ak8975 - AKM9911 ACPI HID. * kxcjk-1013 - KXJ2109 ACPI HID. - KIOX010A ACPI HID. New features * ad5933 - Explicit DT binding. * ad2s90 - Explicit DT binding including dropping spi setup that is done via dt in favour of verifying the settings form DT. * adt7316 - Explicit DT binding and support for gpio, irq_flags etc. * stm32-adc - Runtime power management. Minor fixes and cleanups * core - Protect against missing info structure. * ad2s90 - SPDX - Add documentation fo the mutex. * ad7280a - Check allocation failure. - Fix an accidental replacement of an error return. * adt7316 - Switch some variables to be local and rename for consistency with other drivers. - Revert a false handling of 0 as an error introduced earlier this cycle. * bmi160 - Use devm functions throughout probe() to avoid need for remove(). * hid-sensor-hub - White space cleanup. * hts221 - MAINTAINERS entry. * lis302 - Use generic name in the DT binding doc. * Messon-saradc - Check for allocation error. - Fix some presented clock names that break clk debugfs. * qcom-spmi-adc - A fix for initialization of the prescale property. Came late in the cycle, so merge window is probably the best route for this. * st_lsm6dsx - Allow for variable read length to support wider range of slave devices. * tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits) iio: adc: qcom-spmi-adc5: Initialize prescale properly dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant iio: adc: Allow selection of Exynos ADC on S5PV210 iio: adc: exynos-adc: Add S5PV210 variant iio: bmi160: use all devm functions in probe iio: dac: ad5686: fix bit shift read register iio:dac:ad5686: Add AD5310R support Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" dt-bindings: iio: accel: use a generic node name for lis302 iio: core: check 'info' value before registering the device staging: iio: adc: ad7280a: fix overwrite of the returned value staging: iio: adc: ad7280a: check for devm_kasprint() failure iio: humidity: hts221: add entry in MAINTAINERS file iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID staging:iio:ad2s90: Move out of staging staging:iio:ad2s90: Add comment to device state mutex staging:iio:ad2s90: Replace license text w/ SPDX identifier dt-bindings:iio:resolver: Add docs for ad2s90 staging:iio:ad2s90: Add max frequency check at probe staging:iio:ad2s90: Remove spi setup that should be done via dt ...
2018-12-13regulator: mcp16502: add regulator driver for MCP16502Andrei.Stefanescu@microchip.com
This patch adds a regulator driver for the MCP16502 PMIC. This drivers supports basic operations through the regulator interface such as: - setting/reading voltage - setting/reading operating mode - reading current status Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3Thomas Hellstrom
With the new validation code, a malicious user-space app could potentially submit command streams with enough buffer-object and resource references in them to have the resulting allocated validion nodes and relocations make the kernel run out of GFP_KERNEL memory. Protect from this by having the validation code reserve TTM graphics memory when allocating. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> --- v2: Removed leftover debug printouts
2018-12-13spi: lpspi: Let watermark change with send data lengthClark Wang
Configure watermark to change with the length of the sent data. Support LPSPI sending message shorter than tx/rxfifosize. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13spi: lpspi: Add slave mode supportClark Wang
Add slave mode support to the fsl-lpspi driver, only in PIO mode. For now, there are some limitations for slave mode transmission: 1. The stale data in RXFIFO will be dropped when the Slave does any new transfer. 2. One transfer can be finished only after all transfer->len data been transferred to master device 3. Slave device only accepts transfer->len data. Any data longer than this from master device will be dropped. Any data shorter than this from master will cause LPSPI to stuck due to mentioned limitation 2. 4. Only PIO transfer is supported in Slave Mode. Wire connection: GND, SCK, MISO(to MISO of slave), MOSI(to MOSI of slave), SCS Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13spi: lpspi: Replace all "master" with "controller"Clark Wang
In order to enable the slave mode and make the code more readable, replace all related structure names and object names which is named "master" with "controller". Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13USB: serial: option: add Fibocom NL668 seriesJörgen Storvist
Added USB serial option driver support for Fibocom NL668 series cellular modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces. usb-devices output (QMI mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) usb-devices output (ECM mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-13crypto: cavium/nitrox - Enabled Mailbox supportSrikanth, Jampala
Enabled the PF->VF Mailbox support. Mailbox message are interpreted as {type, opcode, data}. Supported message types are REQ, ACK and NACK. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-12-13Merge tag 'vfio-ccw-20181213' of ↵Martin Schwidefsky
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features Pull vfio-ccw from Cornelia Huck with the following changes: - remove unneeded BOXED state - maintainership changes
2018-12-13s390/zcrypt: rework ap scan bus codeHarald Freudenberger
Rework of the AP bus scan code. The ap_scan_bus() function is large, so this patch splits the code by introducing a new new function _ap_scan_bus_adapter() which deals with just one adapter and thus reduces the scan function code complexity. Now the AP bus scan can handle a type change of an crypto adapter on the fly (e.g. from CEX5 to CEX6). This may be the case with newer versions of zVM where the card may be pure virtual and a type change is just one click. However a type or function change requires to unregister all queue devices and the card device and re-register them. Comments around the AP bus scan code have been added and/or improved to provide some hopefully useful hints about what the code is actually doing. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13s390/zcrypt: make sysfs reset attribute trigger queue resetHarald Freudenberger
Until now there is no way to reset a AP queue or card. Driving a card or queue offline and online again does only toggle the 'software' online state. The only way to trigger a (hardware) reset is by running hot-unplug/hot-plug for example on the HMC. This patch makes the queue reset attribute in sysfs writable. Writing into this attribute triggers a reset on the AP queue's state machine. So the AP queue is flushed and state machine runs through the initial states which cause a reset (PQAP(RAPQ)) and a re-registration to interrupts (PQAP(AQIC)) if available. The reset sysfs attribute is writable by root only. So only an administrator is allowed to initiate a reset of AP queues. Please note that the queue's counter values are left untouched by the reset. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13s390/drivers: fix proc/debugfs file permissionsSebastian Ott
Remove write permissions for fops without a write callback. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13s390: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13irqchip/sun4i: Add support for Allwinner ARMv5 F1C100sMesih Kilinc
This patch adds support for suniv Allwinner ARMv5 F1C100s SoC which has stripped version of interrupt controller that found in A10/A13. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/sun4i: Move IC specific register offsets to structMesih Kilinc
This patch moves IC specific register offsets to sun4i_irq_chip_data struct in order to support different chips. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/sun4i: Add a struct to hold global variablesMesih Kilinc
In order to support different chips, IC specific data should be hold in a struct. This patch moves irq_base and irq_domain global variables to struct. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip: Add RDA8810PL interrupt driverManivannan Sadhasivam
Add interrupt driver for RDA Micro RDA8810PL SoC. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchhip: Convert to using %pOFn instead of device_node.nameYangtao Li
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/irq-imx-gpcv2: Add support for i.MX8MQAndrey Smirnov
Add code needed to support i.MX8MQ. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/irq-imx-gpcv2: Make error messages more consistentAndrey Smirnov
Make error messages more consistent by making sure each starts with "%pOF:". Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/irq-imx-gpcv2: Make use of BIT() macroAndrey Smirnov
Convert all instances of 1 << x to BIT(x) for consistency with other kernel code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/irq-imx-gpcv2: Share reg offset calculation codeAndrey Smirnov
Move identical offset calculation code into a small helper function and make use of it in the rest of the code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchip/irq-imx-gpcv2: Remove unused codeAndrey Smirnov
Varaible 'reg' in imx_gpcv2_irq_set_wake() has no users. Remove it. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
generated by cgit (git 2.34.1) at 2025-09-20 14:52:53 +0000