| Age | Commit message (Collapse) | Author |
|---|
|
Few of the metrics data for smu_v13_0_12 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Few of the metrics data for smu_v13_0_6 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
v2: Move smu_v13_0_12 changes to separate patch(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit updates the VM flush implementation for the SDMA engine.
- Added a new function `sdma_v4_4_2_get_invalidate_req` to construct the VM_INVALIDATE_ENG0_REQ
register value for the specified VMID and flush type. This function ensures that all relevant
page table cache levels (L1 PTEs, L2 PTEs, and L2 PDEs) are invalidated.
- Modified the `sdma_v4_4_2_ring_emit_vm_flush` function to use the new `sdma_v4_4_2_get_invalidate_req`
function. The updated function emits the necessary register writes and waits to perform a VM flush
for the specified VMID. It updates the PTB address registers and issues a VM invalidation request
using the specified VM invalidation engine.
- Included the necessary header file `gc/gc_9_0_sh_mask.h` to provide access to the required register
definitions.
v2: vm flush by the vm inalidation packet (Lijo)
v3: code stle and define thh macro for the vm invalidation packet (Christian)
v4: Format definition sdma vm invalidate packet (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TLB flush
- Modify the VM invalidation engine allocation logic to handle SDMA page rings.
SDMA page rings now share the VM invalidation engine with SDMA gfx rings instead of
allocating a separate engine. This change ensures efficient resource management and
avoids the issue of insufficient VM invalidation engines.
- Add synchronization for GPU TLB flush operations in gmc_v9_0.c.
Use spin_lock and spin_unlock to ensure thread safety and prevent race conditions
during TLB flush operations. This improves the stability and reliability of the driver,
especially in multi-threaded environments.
v2: replace the sdma ring check with a function `amdgpu_sdma_is_page_queue`
to check if a ring is an SDMA page queue.(Lijo)
v3: Add GC version check, only enabled on GC9.4.3/9.4.4/9.5.0
v4: Fix code style and add more detailed description (Christian)
v5: Remove dependency on vm_inv_eng loop order, explicitly lookup shared inv_eng(Christian/Lijo)
v6: Added search shared ring function amdgpu_sdma_get_shared_ring (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase the maximum number of rings supported by the AMDGPU driver from 133 to 149.
This change is necessary to enable support for the SDMA page ring.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of injecting uncorrected error with background workload,
the deferred error among uncorrected errors need to be specified
by checking the deferred and poison bits of status register.
v2: refine checking for deferred error
v2: log possiable DEs among CEs
v2: generate CPER records for DEs among UEs
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX11.5.0/11.5.1 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.5.0/11.5.1 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Follow the same logic as the other IP types.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable pipes on both MECs for MES.
Fixes: 745f46b6a99f ("drm/amdgpu: enable mes v12 self test")
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leftover from MES bring up. There is no production
MES support for MES 10.x. The rest of the MES 10.x
code has already been removed so drop this.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Break when we get to the end of the supported pipes
rather than continuing the loop.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gfx and page queues are per instance, so track them
per instance.
v2: drop extra parameter (Lijo)
Fixes: fdbfaaaae06b ("drm/amdgpu: Improve SDMA reset logic with guilty queue tracking")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the kfd suspend/resume code into the caller. That
is where the KFD is likely to detect a reset so on the KFD
side there is no need to call them. Also add a mutex to
lock the actual reset sequence.
v2: make the locking per instance
Fixes: bac38ca8c475 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
I can't count how often I had to remove this nonsense.
Probably doesn't need an explanation any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Note when the cleaner shader is executed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Note when we switch from one isolation owner to another.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
That was quite troublesome for gang submit. Completely drop this
approach and enforce the isolation separately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of emitting the cleaner shader for every job which has the
enforce_isolation flag set only emit it for the first submission from
every client.
v2: add missing NULL check
v3: fix another NULL pointer deref
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Limiting the number of available VMIDs to enforce isolation causes some
issues with gang submit and applying certain HW workarounds which
require multiple VMIDs to work correctly.
So instead start to track all submissions to the relevant engines in a
per partition data structure and use the dma_fences of the submissions
to enforce isolation similar to what a VMID limit does.
v2: use ~0l for jobs without isolation to distinct it from kernel
submissions which uses NULL for the owner. Add some warning when we
are OOM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This allows using amdgpu_sync even without peeking into the fences for a
long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the critical submission path memory allocations can't wait for
reclaim since that can potentially wait for submissions to finish.
Finally clean that up and mark most memory allocations in the critical
path with GFP_NOWAIT. The only exception left is the dma_fence_array()
used when no VMID is available, but that will be cleaned up later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 55ff973fe1c053de143969cfc8b34baff084084a.
Reason for revert: this causes some tests fail with call trace.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SRIOV, skip the SDMA queue reset and return
error. The engine/queue reset failure will trigger
FLR in the sequence.
v2: do not add queue reset support mask for sriov
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add case for 13.0.12.
Signed-off-by: Ahmad Rehman <ahrehman@amd.com>
Reviewed-by: Vignesh.Chander@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This enables ras to be resumed after gpu recovery on mi350 sriov.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clause instructions with precise memory enabled currently hang the
shader so set capabilities flag to disabled since it's unsafe to use
for debugging.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This one is hilariously outdated, it provided a faster downlink over
TV cable for users of analog modems in the 1990s, through an ISA card.
The web page for the userspace tools has been broken for 25 years, and
the driver has only ever seen mechanical updates.
Link: http://web.archive.org/web/20000611165545/http://home.adelphia.net:80/~siglercm/sb1000.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312085236.2531870-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. The first parameter is NULL here so nothing else needs to
be done.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250319092951.37667-32-jirislaby@kernel.org
[ij: Removed unnecessary details from the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Link: https://lore.kernel.org/r/20250319092951.37667-10-jirislaby@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
When load this mode, we can see the following log:
"power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info()."
So replace hwmon_device_register with hwmon_device_register_with_info.
These attributes, 'power_accuracy', 'power_cap_hyst', 'power_average_min'
and 'power_average_max', should have been placed in hwmon_chip_info as
power data type. But these attributes are displayed as string format on
the following case:
a) power1_accuracy --> display like '90.0%'
b) power1_cap_hyst --> display 'unknown' when its value is 0xFFFFFFFF
c) power1_average_min/max --> display 'unknown' when its value is
negative.
To avoid any changes in the display of these sysfs interfaces, we can't
modifiy the type of these attributes in hwmon core and have to put them
to extra_groups.
Please note that the path of these sysfs interfaces are modified
accordingly if use hwmon_device_register_with_info():
old: all sysfs interfaces are under acpi device, namely,
/sys/class/hwmon/hwmonX/device/
now: all sysfs interfaces are under hwmon device, namely,
/sys/class/hwmon/hwmonX/
The new ABI does not guarantee that the underlying path remains the same.
But we have to accept this change so as to replace the deprecated API.
Fortunately, some userspace application, like libsensors, would scan
the two path and handles this automatically. So we can accept this change
so as to drop the deprecated message.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250319020638.59925-1-lihuisong@huawei.com
[groeck: Fixed some multi-line alignment issues;
reverted to 32-bit arithmetic in power1_accuracy_show()
fixed bad return code from power_meter_is_visible()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Board Controller support for the conga-SA8 module.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250318-b4-cgbc-sa8-support-v1-1-6ae9ec443c05@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Board Controller has some internal sensors. Add a hwmon cell for the
cgbc-hwmon driver which adds support for temperature, voltage, current
and fan sensors.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250203-congatec-board-controller-hwmon-v4-2-ff6c76a4662c@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Tidy up ACPI ID table:
- Drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h and
other necessary headers
- Remove explicit driver_data initializer
- Drop comma in the terminator entry
With that done, extend compile test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250313161630.415515-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
acpi.h is not used by the driver. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250313161206.415160-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only remaining user of 842 compression has been migrated to the
acomp compression API, and so the NX hardware driver has to follow suit,
given that no users of the obsolete 'comp' API remain, and it is going
to be removed.
So migrate the NX driver code to scomp. These will be wrapped and
exposed as acomp implementation via the crypto subsystem's
acomp-to-scomp adaptation layer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use ACOMP_REQUEST_ON_STACK instead of allocating legacy fallback
compression transform.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unused dst_null support.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unused dst_null support.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c78 ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use desc instead of a stack buffer in the final function. This
fixes a compiler warning about buf being uninitialised.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Any driver that needs these library functions should already be selecting
the corresponding Kconfig symbols, so there is no real point in making
these visible.
The original patch that made these user selectable described problems
with drivers failing to select the code they use, but for consistency
it's better to always use 'select' on a symbol than to mix it with
'depends on'.
Fixes: e56e18985596 ("lib/crypto: add prompts back to crypto libraries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c84 ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The FW image size check is already performed in the function
qat_uclo_check_image() before calling `qat_uclo_map_auth_fw()`.
Therefore, the additional check in `qat_uclo_map_auth_fw()` is redundant
and can be safely removed.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the members `css_key` and `css_signature` which are not used for
doing the firmware authentication.
The signed image pointer can be calculated using the pointer to the CSS
header and the length of the CSS header, making these members redundant.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When building for 32-bit targets, for which ssize_t is 'int' instead of
'long', there is a warning due to an incorrect format specifier:
In file included from include/linux/printk.h:610,
from include/linux/kernel.h:31,
from include/linux/clk.h:13,
from drivers/crypto/tegra/tegra-se-hash.c:7:
drivers/crypto/tegra/tegra-se-hash.c: In function 'tegra_sha_prep_cmd':
drivers/crypto/tegra/tegra-se-hash.c:343:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' {aka 'int'} [-Werror=format=]
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
drivers/crypto/tegra/tegra-se-hash.c:343:59: note: format string is defined here
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
Use '%zd', the proper specifier for ssize_t, to resolve the warning.
Fixes: ff4b7df0b511 ("crypto: tegra - Fix HASH intermediate result handling")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
