| Age | Commit message (Collapse) | Author |
|---|
|
[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.
[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.
[Why & How]
Original change causes a regression. Revert
until fix is available.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Needs to set the default value of the LTTPR timeout after resume.
[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.
[ 489.885525] Call Trace:
[ 489.885525] <TASK>
[ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm]
[ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu]
[ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0
[ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 489.886132] ? __pm_runtime_resume+0x60/0x90
[ 489.886134] pci_device_remove+0x3e/0xb0
[ 489.886135] __device_release_driver+0x1ab/0x2a0
[ 489.886137] driver_detach+0xf3/0x140
[ 489.886138] bus_remove_driver+0x6c/0xf0
[ 489.886140] driver_unregister+0x31/0x60
[ 489.886141] pci_unregister_driver+0x40/0x90
[ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu]
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
variable
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.
On 32-bit arm, do_div() causes a compile-time warning here:
include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
238 | __rem = __div64_32(&(n), __base); \
| ^~~~
| |
| unsigned int *
drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
1130 | do_div(battmgr->status.percent, 100);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The of_iomap() function returns NULL if it fails. It never returns
error pointers. Fix the check accordingly.
Fixes: 6286bbb40576 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If alloc_soc_dts() fails, then we can just return. Trying to free
"soc_dts" will lead to an Oops.
Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- regression fix in connection with the rtl8169 driver on SuperH boards
that was introduced when the driver was switched to use
devm_clk_get_optional_enabled() to simplify the code (Geert
Uytterhoeven)
- build warning fix to allow the kernel to be built with CONFIG_WERROR
enabled (Michael Karcher)
* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: clk: Fix clk_enable() to return 0 on NULL clk
sh: intc: Avoid spurious sizeof-pointer-div warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2, ubi and ubifs updates from Richard Weinberger:
"JFFS2:
- Fix memory corruption in error path
- Spelling and coding style fixes
UBI:
- Switch to BLK_MQ_F_BLOCKING in ubiblock
- Wire up partent device (for sysfs)
- Multiple UAF bugfixes
- Fix for an infinite loop in WL error path
UBIFS:
- Fix for multiple memory leaks in error paths
- Fixes for wrong space accounting
- Minor cleanups
- Spelling and coding style fixes"
* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
ubi: block: Fix a possible use-after-free bug in ubiblock_create()
ubifs: make kobj_type structures constant
mtd: ubi: block: wire-up device parent
mtd: ubi: wire-up parent MTD device
ubi: use correct names in function kernel-doc comments
ubi: block: set BLK_MQ_F_BLOCKING
jffs2: Fix list_del corruption if compressors initialized failed
jffs2: Use function instead of macro when initialize compressors
jffs2: fix spelling mistake "neccecary"->"necessary"
ubifs: Fix kernel-doc
ubifs: Fix some kernel-doc comments
UBI: Fastmap: Fix kernel-doc
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
ubifs: ubifs_writepage: Mark page dirty after writing inode failed
ubifs: dirty_cow_znode: Fix memleak in error handling path
ubifs: Re-statistic cleaned znode count if commit failed
ubi: Fix permission display of the debugfs files
...
|
|
When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.
Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit
47894e0fa6a5 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
changed the behavior associated with the return value when the caller
does not supply a large enough certificate buffer. Prior to the commit a
value of -EIO was returned. Now, 0 is returned. This breaks the
established ABI with the user.
Change the code to detect the buffer size error and return -EIO.
Fixes: 47894e0fa6a5 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
Reported-by: Larry Dewey <larry.dewey@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Larry Dewey <larry.dewey@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/2afbcae6daf13f7ad5a4296692e0a0fe1bc1e4ee.1677083979.git.thomas.lendacky@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Subsystem:
- transfer pid from boardinfo to device info
Drivers:
- dw-i3c-master: stop hardcoding initial speed"
* tag 'i3c/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: stop hardcoding initial speed
i3c: transfer pid from boardinfo to device info
|
|
Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.
Tested: tested with an i3c sensor and captured with a logic analyzer.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
QCM2290 doesn't seem to support reg-dma, UBWC and CSC. Drop
corresponding features being incorrectly enabled for qcm2290.
Cc: Loic Poulain <loic.poulain@linaro.org>
Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522209/
Link: https://lore.kernel.org/r/20230211231259.1308718-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The SC8280XP also has a black hole at the top of MDP_TOP region. Set
corresponding bit to disable access to that region.
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522207/
Link: https://lore.kernel.org/r/20230211231259.1308718-2-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.
This was due to a bug with WCN6855 WLAN firmware interaction with
the system.
This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Remove the quirk as it's no longer necessary with this firmware.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
improvements.
The AB8500 driver gained support for reading the initial hardware
state and the Synopsys DesignWare driver received some work to prepare
for device tree and platform support"
* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: dwc: Use devm_pwmchip_add()
pwm: dwc: Move memory allocation to own function
pwm: dwc: Change &pci->dev to dev in probe
dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
pwm: ab8500: Implement .get_state()
pwm: ab8500: Fix calculation of duty and period
pwm: lp3943: Drop unused i2c include
dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
pwm: stm32-lp: fix the check on arr and cmp registers update
pwm: Move pwm_capture() dummy to restore order
pwm: sifive: Always let the first pwm_apply_state succeed
|
|
Fix warn: iterator used outside loop: 'xfer'. 'xfer' variable contain
invalid value in few conditions. Complete transfer within DATA phase
in successful case and at the end for failed transfer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link:https://lore.kernel.org/all/202210191211.46FkzKmv-lkp@intel.com/
Fixes: 8777dd9dff40 ("spi: tegra210-quad: Fix combined sequence")
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20230227200428.45832-1-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kernel always logs the unique subsystem name for a discovery
controller, even in the case user space asked for the well known.
This has lead to confusion as the logs of nvme-cli and the kernel
logs didn't match.
First, nvme-cli connects to the well known discovery controller to
figure out if it supports TP8013. If so then nvme-cli disconnects and
connects to the unique discovery controller. Currently, the kernel show
that user space connected twice to the unique one.
To avoid further confusion, show the well known discovery controller if
user space asked for it:
$ nvme connect-all -v -t tcp -a 192.168.0.1
nvme0: nqn.2014-08.org.nvmexpress.discovery connected
nvme0: nqn.2014-08.org.nvmexpress.discovery disconnected
nvme0: nqn.discovery connected
kernel log:
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.0.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
nvme nvme0: new ctrl: NQN "nqn.discovery", addr 192.168.0.1:8009
Fixes: e5ea42faa773 ("nvme: display correct subsystem NQN")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: 02c57a82c008 ("nvme-tcp: print actual source IP address through sysfs "address" attr")
Reviewed-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This function was transitioned from returning NVMe status codes to
returning traditional kernel error codes. However, this particular
return now accidentally returns positive error codes like ENOMEM instead
of negative -ENOMEM.
Fixes: b0ef1b11d390 ("nvme-auth: don't use NVMe status codes")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Bring back the check of the Identify Namespace return value for the
legacy NVMe 1.0-style sequential scanning. While NVMe 1.0 does not
support namespace management, there are "modern" cloud solutions like
Google Cloud Platform that claim the obsolete 1.0 compliance for no
good reason while supporting proprietary sideband namespace management.
Fixes: 1a893c2bfef4 ("nvme: refactor namespace probing")
Reported-by: Nils Hanke <nh@edgeless.systems>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Nils Hanke <nh@edgeless.systems>
|
|
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock
the &phydev->lock mutex before returning.
Fixes: 3eeca4e199ce ("net: phy: do not force EEE support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fdp_nci_i2c_read_device_properties
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.
This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.
Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.
Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
|
|
Clang warns (or errors with CONFIG_WERROR):
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!fbdev)
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:259:26: note: uninitialized use occurs here
drm_fb_helper_unprepare(helper);
^~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:235:2: note: remove the 'if' if its condition is always false
if (!fbdev)
^~~~~~~~~~~
../drivers/gpu/drm/omapdrm/omap_fbdev.c:228:30: note: initialize the variable 'helper' to silence this warning
struct drm_fb_helper *helper;
^
= NULL
1 error generated.
Return early, as there is nothing for the function to do if memory
cannot be allocated. There is no point in adding another label to just
emit the warning at the end of the function in this case, as memory
allocation failures are already logged.
Fixes: 3fb1f62f80a1 ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Link: https://github.com/ClangBuiltLinux/linux/issues/1809
Link: https://lore.kernel.org/oe-kbuild-all/202302250058.fYTe9aTP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224-omapdrm-wsometimes-uninitialized-v1-1-3fec8906ee3a@kernel.org
|
|
The attempt to add DMA alignment padding by moving IV to the front
of edesc was completely broken as it didn't change the places where
edesc was freed.
It's also wrong as the IV may still share a cache-line with the
edesc.
Fix this by restoring the original layout and simply reserving
enough memmory so that the IV is on a DMA cache-line by itself.
Reported-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Fixes: 199354d7fb6e ("crypto: caam - Remove GFP_DMA and add DMA alignment padding")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 226fae124b2d ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.
While doing this it also moved the unconditional assignment of
ret = -ENXIO;
This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.
To avoid this only assign "ret = -ENXIO" when actually needed.
[ Also, the 'goto unlock_out" needs to be just a "break", so that it
does the right thing when it exits on later iterations when partial
success has happened - Linus ]
Reported-by: Storm Dragon <stormdragon2976@gmail.com>
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.
Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
|
arm:cubieboard
Without proper initialization, "changed" returned random numbers and caused
interface initialization failures.
Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
886 | u16 pending_idx;
| ^~~~~~~~~~~
pending_idx is not used so remove it. Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.
* tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
wifi: ath11k: allow system suspend to survive ath11k
====================
Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
|
|
Introduce a new ap queue status register wrapper union to access register
wide values. So the inline assembler only sees register wide values but the
surrounding code may use a more structured view of the same value and a
reader of the code (and the compiler) gets a clear understanding about the
mapping between fields and register values.
All the changes to access the ap queue status are local to the inline
functions within ap.h. However, the struct ap_qirq_ctrl has been replaces
by a union for same reason and this needed slight adaptions in the calling
code.
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Andreas Arnez <arnez@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The log entries are stored in le32, so use appropriate byte swapping
macros.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302242222.PevBhzvC-lkp@intel.com/
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
