summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-09-09iommu/arm-smmu-v3: Remove strtab_base/cfgJason Gunthorpe
These values can be computed from the other values already stored in the config. Move the calculation to arm_smmu_write_strtab() and do it directly before writing the registers. This moves all the logic to calculate the two registers into one function from three and saves an unimportant 16 bytes from the arm_smmu_device. Suggested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/4-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09iommu/arm-smmu-v3: Reorganize struct arm_smmu_strtab_cfgJason Gunthorpe
The members here are being used for both the linear and the 2 level case, with the meaning of each item slightly different in the two cases. Split it into a clean union where both cases have their own struct with their own logical names and correct types. Adjust all the users to detect linear/2lvl and use the right sub structure and types consistently. Remove STRTAB_STE_DWORDS by changing the last places to use sizeof(struct arm_smmu_ste). Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/3-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09iommu/arm-smmu-v3: Add types for each level of the 2 level stream tableJason Gunthorpe
Add types struct arm_smmu_strtab_l1 and l2 to represent the HW layout of the descriptors, and use them in most places, following patches will get the remaing places. The size of the l1 and l2 HW allocations are sizeof(struct arm_smmu_strtab_l1/2). This provides some more clarity than having raw __le64 *'s and sizes computed via macros. Remove STRTAB_L1_DESC_DWORDS. Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/2-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()Jason Gunthorpe
Don't open code the calculations of the indexes for each level, provide two functions to do that math and call them in all the places. Update all the places computing indexes. Calculate the L1 table size directly based on the max required index from the cap. Remove STRTAB_L1_SZ_SHIFT in favour of STRTAB_NUM_L2_STES. Use STRTAB_NUM_L2_STES to replace remaining open coded 1 << STRTAB_SPLIT. Tested-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09kbuild: split device tree build rules into scripts/Makefile.dtbsMasahiro Yamada
scripts/Makefile.lib is included not only from scripts/Makefile.build but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o}, where DT build rules are not required. Split the DT build rules out to scripts/Makefile.dtbs, and include it only when necessary. While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of $(multi-dtb-y). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-09perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabledIlkka Koskinen
The PMU driver attempts to use PC_WRITE_RETIRED for the HW branch event, if enabled. However, PC_WRITE_RETIRED counts only taken branches, whereas BR_RETIRED counts also non-taken ones. Furthermore, perf uses HW branch event to calculate branch misses ratio, implying BR_RETIRED is the correct event to count. We keep PC_WRITE_RETIRED still as an option in case BR_RETIRED isn't implemented. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240906191539.4847-1-ilkka@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660Dmitry Baryshkov
The Qualcomm SDM630 / SDM660 platform requires the same kind of workaround as MSM8998: some IOMMUs have context banks reserved by firmware / TZ, touching those banks resets the board. Apply the num_context_bank workaround to those two SMMU devices in order to allow them to be used by Linux. Fixes: b812834b5329 ("iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirks") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-1-e316055142f8@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2024-09-09PCI: imx6: Call common PHY API to set mode, speed, and submodeFrank Li
Invoke the common PHY API to configure mode, speed, and submode. While these functions are optional in the PHY interface, they are necessary for certain PHY drivers. Lack of support for these functions in a PHY driver does not cause harm. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-10-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Consolidate redundant if-checksFrank Li
Consolidated redundant if-checks pertaining to imx_pcie->phy. Instead of two separate checks, merged them into one to improve code readability. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-8-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Improve comment for workaround ERR010728Frank Li
Improve comment about workaround ERR010728 by using official errata document content, see: https://www.nxp.com/webapp/Download?colCode=IMX7DS_2N09P Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-7-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Simplify switch-case logic by involve core_reset callbackFrank Li
Instead of using the switch case statement to assert/dassert the core reset handled by this driver itself, let's introduce a new callback core_reset() and define it for platforms that require it. This simplifies the code. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Introduce SoC specific callbacks for controlling REFCLKFrank Li
Instead of using the switch case statement to enable/disable the reference clock handled by this driver itself, let's introduce a new callback enable_ref_clk() and define it for platforms that require it. This simplifies the code. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Rename imx6_* with imx_*Frank Li
Since this driver has evolved to support other i.MX SoCs such as i.MX7/8/9, thus rename the 'imx6' prefix to 'imx' to avoid confusion. The driver name is left unchanged to avoid breaking userspace. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log, refactor the IMX_* macros] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Fix missing call to phy_power_off() in error handlingFrank Li
Fix missing call to phy_power_off() in the error path of imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy as the PHY API already handles NULL pointers. Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.1+
2024-09-09PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSIRichard Zhu
Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying the correct hardware outbound alignment requirement. The i.MX platform has a restriction about outbound address translation. The pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX platform to meet the hardware requirement, which is the same as inbound address alignment. Thus, align it with epc_features::align. Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Cc: <stable@vger.kernel.org> # 6.9+
2024-09-09PCI: imx6: Fix establish link failure in EP mode for i.MX8MM and i.MX8MPRichard Zhu
Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata. This flag was overlooked during code restructuring. It is crucial to release the app-reset from the System Reset Controller before initiating LTSSM to rectify the issue. Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.9+
2024-09-09PCI: Use an error code with PCIe failed link retrainingMaciej W. Rozycki
Given how the call place in pcie_wait_for_link_delay() got structured now, and that pcie_retrain_link() returns a potentially useful error code, convert pcie_failed_link_retrain() to return an error code rather than a boolean status, fixing handling at the call site mentioned. Update the other call site accordingly. Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09firewire: core: use mutex to coordinate concurrent calls to flush completionsTakashi Sakamoto
In current implementation, test_and_set_bit_lock() is used to mediate concurrent calls of ohci_flush_iso_completions(). However, the ad-hoc usage of atomic operations is not preferable. This commit uses mutex_trylock() as the similar operations. The core function is responsible for the mediation, instead of 1394 OHCI driver. Link: https://lore.kernel.org/r/20240909140018.65289-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2024-09-09firewire: core: move workqueue handler from 1394 OHCI driver to core functionTakashi Sakamoto
In current implementation, the work item for isochronous context executes the same procedure of fw_iso_context_flush_completions() internally. There is a space to refactor the implementation. This commit calls fw_iso_context_flush_completions() in the work item. It obsoletes fw_iso_context_init_work(). It also obsoletes a pair of disable_work_sync() and enable_work() since the usage of test_and_set_bit_lock() mediates concurrent call already. Link: https://lore.kernel.org/r/20240909140018.65289-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2024-09-09PCI: Correct error reporting with PCIe failed link retrainingMaciej W. Rozycki
Only return successful completion status from pcie_failed_link_retrain() if retraining has actually been done, preventing excessive delays from being triggered at call sites in a hope that communication will finally be established with the downstream device where in fact nothing has been done about the link in question that would justify such a hope. Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133260.61955@angie.orcam.me.uk Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09PCI: Revert to the original speed after PCIe failed link retrainingMaciej W. Rozycki
When `pcie_failed_link_retrain' has failed to retrain the link by hand it leaves the link speed restricted to 2.5GT/s, which will then affect any device that has been plugged in later on, which may not suffer from the problem that caused the speed restriction to have been attempted. Consequently such a downstream device will suffer from an unnecessary communication throughput limitation and therefore performance loss. Remove the speed restriction then and revert the Link Control 2 register to its original state if link retraining with the speed restriction in place has failed. Retrain the link again afterwards so as to remove any residual state, waiting on LT rather than DLLLA to avoid an excessive delay and ignoring the result as this training is supposed to fail anyway. Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures") Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2408251412590.30766@angie.orcam.me.uk Reported-by: Matthew W Carlis <mattc@purestorage.com> Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/ Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09PCI: Clear the LBMS bit after a link retrainMaciej W. Rozycki
The LBMS bit, where implemented, is set by hardware either in response to the completion of retraining caused by writing 1 to the Retrain Link bit or whenever hardware has changed the link speed or width in attempt to correct unreliable link operation. It is never cleared by hardware other than by software writing 1 to the bit position in the Link Status register and we never do such a write. We currently have two places, namely apply_bad_link_workaround() and pcie_failed_link_retrain() in drivers/pci/controller/dwc/pcie-tegra194.c and drivers/pci/quirks.c respectively where we check the state of the LBMS bit and neither is interested in the state of the bit resulting from the completion of retraining, both check for a link fault. And in particular pcie_failed_link_retrain() causes issues consequently, by trying to retrain a link where there's no downstream device anymore and the state of 1 in the LBMS bit has been retained from when there was a device downstream that has since been removed. Clear the LBMS bit then at the conclusion of pcie_retrain_link(), so that we have a single place that controls it and that our code can track link speed or width changes resulting from unreliable link operation. Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133140.61955@angie.orcam.me.uk Reported-by: Matthew W Carlis <mattc@purestorage.com> Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/ Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09Merge tag 'rtw-next-2024-09-05' of https://github.com/pkshih/rtwKalle Valo
rtw-next patches for v6.12 The rtw89 is continuously adjusting code to support MLO. The major changes are listed below: rtw88: * fix USB not transmitting beacon in AP mode rtw89: * complete BT-coexistence code for RTL8852BT * fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT * enable WoWLAN net-detect for more one chip, RTL8922A
2024-09-09wifi: brcmfmac: cfg80211: Convert comma to semicolonChen Ni
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240904074637.1352864-1-nichen@iscas.ac.cn
2024-09-09wifi: rsi: Remove an unused field in struct rsi_debugfsChristophe JAILLET
dfs_get_ops has apparently never been used since its introduction by commit dad0d04fa7ba ("rsi: Add RS9113 wireless driver") in 2014-03. More-over struct rsi_dbg_ops is not defined. Remove the unused field from struct rsi_debugfs. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/15b0609d7b1569ec6c500a175caef4c9189f33e2.1725394207.git.christophe.jaillet@wanadoo.fr
2024-09-09wifi: libertas: Cleanup unused declarationsYue Haibing
There is no caller and implementation in tree. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240903115811.958692-1-yuehaibing@huawei.com
2024-09-09wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in ↵Li Zetao
wilc_bus_probe() Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() + clk_prepare_enable(), which can make the clk consistent with the device life cycle and reduce the risk of unreleased clk resources. Since the device framework has automatically released the clk resource, there is no need to execute clk_disable_unprepare(clk) on the error path. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240903110205.4127706-3-lizetao1@huawei.com
2024-09-09wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in ↵Li Zetao
wilc_sdio_probe() Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() + clk_prepare_enable(), which can make the clk consistent with the device life cycle and reduce the risk of unreleased clk resources. Since the device framework has automatically released the clk resource, there is no need to execute clk_disable_unprepare(clk) on the error path, drop the clk_disable_unprepare label, and the original error process can change to dispose_irq. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240903110205.4127706-2-lizetao1@huawei.com
2024-09-09wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_paramJiawei Ye
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path") Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com> Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
2024-09-09wifi: mwifiex: Fix memcpy() field-spanning write warning in ↵Gustavo A. R. Silva
mwifiex_cmd_802_11_scan_ext() Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto
2024-09-09spi: geni-qcom: Fix incorrect free_irq() sequenceJinjie Ruan
In spi_geni_remove(), the free_irq() sequence is different from that on the probe error path. And the IRQ will still remain and it's interrupt handler may use the dma channel after release dma channel and before free irq, which is not secure, fix it. Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-09spi: geni-qcom: Undo runtime PM changes at driver exit timeJinjie Ruan
It's important to undo pm_runtime_use_autosuspend() with pm_runtime_dont_use_autosuspend() at driver exit time unless driver initially enabled pm_runtime with devm_pm_runtime_enable() (which handles it for you). Hence, switch to devm_pm_runtime_enable() to fix it, so the pm_runtime_disable() in probe error path and remove function can be removed. Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-09optee: Fix a NULL vs IS_ERR() checkDan Carpenter
The tee_shm_get_va() function never returns NULL, it returns error pointers. Update the check to match. Fixes: f0c8431568ee ("optee: probe RPMB device using RPMB subsystem") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Link: https://lore.kernel.org/r/f8c12aed-b5d1-4522-bf95-622b8569706d@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-09dma-buf: heaps: Fix off-by-one in CMA heap fault handlerT.J. Mercier
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. Reported-by: Xingyu Jin <xingyuj@google.com> Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation") Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10. Signed-off-by: T.J. Mercier <tjmercier@google.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com
2024-09-09s390: remove unused f_versionChristian Brauner
It's not used so don't bother with it at all. Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-4-6d3e4816aa7b@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-09-09adi: remove unused f_versionChristian Brauner
It's not used for adi so don't bother with it at all. Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-2-6d3e4816aa7b@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-09-09mtd: spinand: macronix: Flag parts needing explicit plane selectCheng Ming Lin
Macronix serial NAND flash with a two-plane structure requires insertion of the Plane Select bit into the column address during the write_to_cache operation. Additionally, for MX35{U,F}2G14AC and MX35LF2GE4AB, insertion of the Plane Select bit into the column address is required during the read_from_cache operation. Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-3-linchengming884@gmail.com
2024-09-09mtd: spinand: Add support for setting plane select bitsCheng Ming Lin
Add two flags for inserting the Plane Select bit into the column address during the write_to_cache and the read_from_cache operation. Add the SPINAND_HAS_PROG_PLANE_SELECT_BIT flag for serial NAND flash that require inserting the Plane Select bit into the column address during the write_to_cache operation. Add the SPINAND_HAS_READ_PLANE_SELECT_BIT flag for serial NAND flash that require inserting the Plane Select bit into the column address during the read_from_cache operation. Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240909092643.2434479-2-linchengming884@gmail.com
2024-09-09mtd: rawnand: mtk: Fix init error pathMiquel Raynal
Reviewing a series converting the for_each_chil_of_node() loops into their _scoped variants made me realize there was no cleanup of the already registered NAND devices upon error which may leak memory on systems with more than a chip when this error occurs. We should call the _nand_chips_cleanup() function when this happens. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org> Link: https://lore.kernel.org/linux-mtd/20240826153019.67106-2-miquel.raynal@bootlin.com
2024-09-09net: ethernet: fs_enet: phylink conversionMaxime Chevallier
fs_enet is a quite old but still used Ethernet driver found on some NXP devices. It has support for 10/100 Mbps ethernet, with half and full duplex. Some variants of it can use RMII, while other integrations are MII-only. Add phylink support, thus removing custom fixed-link hanldling. This also allows removing some internal flags such as the use_rmii flag. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: simplify clock handling with devm accessorsMaxime Chevallier
devm_clock_get_enabled() can be used to simplify clock handling for the PER register clock. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: use macros for speed and duplex valuesMaxime Chevallier
The PHY speed and duplex should be manipulated using the SPEED_XXX and DUPLEX_XXX macros available. Use it in the fcc, fec and scc MAC for fs_enet. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: drop unused phy_info and mii_if_infoMaxime Chevallier
There's no user of the struct phy_info, the 'phy' field and the mii_if_info in the fs_enet driver, probably dating back when phylib wasn't as widely used. Drop these from the driver code. As the definition for struct mii_if_info is no longer required, drop the include for linux/mii.h altogether in the driver. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: only protect the .restart() call in .adjust_linkMaxime Chevallier
When .adjust_link() gets called, it runs in thread context, with the phydev->lock held. We only need to protect the fep->fecp/fccp/sccp register that are accessed within the .restart() function from concurrent access from the interrupts. These registers are being protected by the fep->lock spinlock, so we can move the spinlock protection around the .restart() call instead of the entire adjust_link() call. By doing so, we can simplify further the .adjust_link() callback and avoid the intermediate helper. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: drop the .adjust_link custom fs_opsMaxime Chevallier
There's no in-tree user for the fs_ops .adjust_link() function, so we can always use the generic one in fe_enet-main. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: cosmetic cleanupsMaxime Chevallier
Due to the age of the driver and the slow recent activity on it, the code has taken some layers of dust. Clean the main driver file up so that it passes checkpatch and also conforms with the net coding style. Changes include : - Re-ordering of the variable declarations for RCT - Fixing the comment styles to either one-line comments, or net-style comments - Adding braces around single-statement 'else' clauses - Aligning function/macro parameters on the opening parenthesis - Simplifying checks for NULL pointers - Splitting cascaded assignments into individual assignments - Fixing some typos - Fixing whitespace issues This is a cosmetic change and doesn't introduce any change in behaviour. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09net: ethernet: fs_enet: convert to SPDXMaxime Chevallier
The ENET driver has SPDX tags in the header files, but they were missing in the C files. Change the licence information to SPDX format. Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-09Merge remote-tracking branches 'ras/edac-amd-atl', 'ras/edac-misc' and ↵Borislav Petkov (AMD)
'ras/edac-drivers' into edac-updates * ras/edac-amd-atl: RAS/AMD/ATL: Translate normalized to system physical addresses using PRM ACPI: PRM: Add PRM handler direct call support * ras/edac-misc: EDAC/synopsys: Fix error injection on Zynq UltraScale+ * ras/edac-drivers: EDAC: Drop obsolete PPC4xx driver EDAC/sb_edac: Fix the compile warning of large frame size EDAC/{skx_common,i10nm}: Remove the AMAP register for determing DDR5 EDAC/{skx_common,skx,i10nm}: Move the common debug code to skx_common EDAC/igen6: Fix conversion of system address to physical memory address Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
2024-09-09parisc: pdc_stable: Constify struct kobj_typeHongbo Li
This 'struct kobj_type' is not modified. It is only used in kobject_init_and_add() which takes a 'const struct kobj_type *ktype' parameter. Constifying this structure and moving it to a read-only section, and can increase over all security. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2024-09-09Merge 6.11-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well, and this also resolves the merge conflict in: drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 05:05:23 +0000