summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-23RDMA/ib_srp: Fix a deadlockBart Van Assche
Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-02-23PCI: Mark all AMD Navi10 and Navi14 GPU ATS as brokenAlex Deucher
There are enough VBIOS escapes without the proper workaround that some users still hit this. Microsoft never productized ATS on Windows so OEM platforms that were Windows-only didn't always validate ATS. The advantages of ATS are not worth it compared to the potential instabilities on harvested boards. Disable ATS on all Navi10 and Navi14 boards. Symptoms include: amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049 amdgpu 0000:07:00.0: amdgpu: GPU reset begin! amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110 amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed Related commits: e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken") a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: add symptoms and related commits] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760 Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com>
2022-02-23nvme-tcp: send H2CData PDUs based on MAXH2CDATAVarun Prakash
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-23nvme: also mark passthrough-only namespaces ready in nvme_update_ns_infoChristoph Hellwig
Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses to check if a path can be used or not. We also need to set this flag for devices that fail the ZNS feature validation and which are available through passthrough devices only to that they can be used in multipathing setups. Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Reported-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Kanchan Joshi <joshi.k@samsung.com>
2022-02-23nvme: don't return an error from nvme_configure_metadataChristoph Hellwig
When a fabrics controller claims to support an invalidate metadata configuration we already warn and disable metadata support. No need to also return an error during revalidation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Kanchan Joshi <joshi.k@samsung.com>
2022-02-23drm/edid: Always set RGB444Maxime Ripard
In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
2022-02-23drivers/net/ftgmac100: fix DHCP potential failure with systemdHeyi Guo
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: adjust code place for function call dependencyHeyi Guo
This is to prepare for ftgmac100_adjust_link() to call ftgmac100_reset() directly. Only code places are changed. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drivers/net/ftgmac100: refactor ftgmac100_reset_task to enable direct ↵Heyi Guo
function call This is to prepare for ftgmac100_adjust_link() to call reset function directly, instead of task schedule. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23vhost/vsock: don't check owner in vhost_vsock_stop() while releasingStefano Garzarella
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drm/tegra: dpaux: Populate AUX busThierry Reding
The DPAUX hardware block exposes an DP AUX interface that provides access to an AUX bus and the devices on that bus. Use the DP AUX bus infrastructure that was recently introduced to probe devices on this bus from DT. Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-23drm/radeon: fix variable typeChristian König
When we switch to dma_resv_wait_timeout() the returned type changes as well. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 89aae41d740f ("drm/radeon: use dma_resv_wait_timeout() instead of manually waiting") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215600 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220221110503.2803-1-christian.koenig@amd.com
2022-02-22ibmvnic: schedule failover only if vioctl failsSukadev Bhattiprolu
If client is unable to initiate a failover reset via H_VIOCTL hcall, then it should schedule a failover reset as a last resort. Otherwise, there is no need to do a last resort. Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry") Reported-by: Cris Forno <cforno12@outlook.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23ata: pata_hpt37x: disable primary channel on HPT371Sergey Shtylyov
The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel. Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-22hwmon: (pmbus) Clear pmbus fault/warning bits after readVikash Chandola
Almost all fault/warning bits in pmbus status registers remain set even after fault/warning condition are removed. As per pmbus specification these faults must be cleared by user. Modify hwmon behavior to clear fault/warning bit after fetching data if fault/warning bit was set. This allows to get fresh data in next read. Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com> Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-22hwmon: Handle failure to register sensor with thermal zone correctlyGuenter Roeck
If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Fixes: 1597b374af222 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-22regulator: da9121: Remove surplus DA9141 parametersAdam Ward
Remove ramp_delay/enable_time values - subject to OTP, incorrect Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/a175201b4a7ea323c6a70d77f7f6d2124bfc0bed.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22regulator: da9121: Fix DA914x voltage valueAdam Ward
Update DA9141/2 max voltage to match spec change Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/9d1ec5b6db70d27f56d05b8a0139fc0840f03e20.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22regulator: da9121: Fix DA914x current valuesAdam Ward
Update DA9141/2 ranges to correct errors Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/cd5732c5061ce49dcfbcebb306d12ba1664b4ea6.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22driver core: Free DMA range map when device is releasedMårten Lindahl
When unbinding/binding a driver with DMA mapped memory, the DMA map is not freed before the driver is reloaded. This leads to a memory leak when the DMA map is overwritten when reprobing the driver. This can be reproduced with a platform driver having a dma-range: dummy { ... #address-cells = <0x2>; #size-cells = <0x2>; ranges; dma-ranges = <...>; ... }; and then unbinding/binding it: ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/unbind DMA map object 0xffffff800b0ae540 still being held by &pdev->dev ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/bind ~# echo scan > /sys/kernel/debug/kmemleak ~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff800b0ae540 (size 64): comm "sh", pid 833, jiffies 4295174550 (age 2535.352s) hex dump (first 32 bytes): 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................ backtrace: [<ffffffefd1694708>] create_object.isra.0+0x108/0x344 [<ffffffefd1d1a850>] kmemleak_alloc+0x8c/0xd0 [<ffffffefd167e2d0>] __kmalloc+0x440/0x6f0 [<ffffffefd1a960a4>] of_dma_get_range+0x124/0x220 [<ffffffefd1a8ce90>] of_dma_configure_id+0x40/0x2d0 [<ffffffefd198b68c>] platform_dma_configure+0x5c/0xa4 [<ffffffefd198846c>] really_probe+0x8c/0x514 [<ffffffefd1988990>] __driver_probe_device+0x9c/0x19c [<ffffffefd1988cd8>] device_driver_attach+0x54/0xbc [<ffffffefd1986634>] bind_store+0xc4/0x120 [<ffffffefd19856e0>] drv_attr_store+0x30/0x44 [<ffffffefd173c9b0>] sysfs_kf_write+0x50/0x60 [<ffffffefd173c1c4>] kernfs_fop_write_iter+0x124/0x1b4 [<ffffffefd16a013c>] new_sync_write+0xdc/0x160 [<ffffffefd16a256c>] vfs_write+0x23c/0x2a0 [<ffffffefd16a2758>] ksys_write+0x64/0xec To prevent this we should free the dma_range_map when the device is released. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Cc: stable <stable@vger.kernel.org> Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220216094128.4025861-1-marten.lindahl@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-22ata: pata_hpt37x: fix PCI clock detectionSergey Shtylyov
The f_CNT register (at the PCI config. address 0x78) is 16-bit, not 8-bit! The bug was there from the very start... :-( Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-21drm/amd/display: For vblank_disable_immediate, check PSR is really usedMichel Dänzer
Even if PSR is allowed for a present GPU, there might be no eDP link which supports PSR. Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-21drm/amd/pm: fix some OEM SKU specific stability issuesEvan Quan
Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU specific stability issues. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-21drm/amdgpu: disable MMHUB PG for PicassoEvan Quan
MMHUB PG needs to be disabled for Picasso for stability reasons. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-21drm/amd/display: Protect update_bw_bounding_box FPU code.Bas Nieuwenhuizen
For DCN3/3.01/3.02 at least these use the fpu. v2: squash in build fix for when DCN is not enabled (Leo) Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-21sc16is7xx: Fix for incorrect data being transmittedPhil Elwell
UART drivers are meant to use the port spinlock within certain methods, to protect against reentrancy. The sc16is7xx driver does very little locking, presumably because when added it triggers "scheduling while atomic" errors. This is due to the use of mutexes within the regmap abstraction layer, and the mutex implementation's habit of sleeping the current thread while waiting for access. Unfortunately this lack of interlocking can lead to corruption of outbound data, which occurs when the buffer used for I2C transmission is used simultaneously by two threads - a work queue thread running sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both of which can call sc16is7xx_handle_tx. An earlier patch added efr_lock, a mutex that controls access to the EFR register. This mutex is already claimed in the IRQ handler, and all that is required is to claim the same mutex in sc16is7xx_tx_proc. See: https://github.com/raspberrypi/linux/issues/4885 Fixes: 6393ff1c4435 ("sc16is7xx: Use threaded IRQ") Cc: stable <stable@vger.kernel.org> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix deadlock in gsmtty_open()daniel.starke@siemens.com
In the current implementation the user may open a virtual tty which then could fail to establish the underlying DLCI. The function gsmtty_open() gets stuck in tty_port_block_til_ready() while waiting for a carrier rise. This happens if the remote side fails to acknowledge the link establishment request in time or completely. At some point gsm_dlci_close() is called to abort the link establishment attempt. The function tries to inform the associated virtual tty by performing a hangup. But the blocking loop within tty_port_block_til_ready() is not informed about this event. The patch proposed here fixes this by resetting the initialization state of the virtual tty to ensure the loop exits and triggering it to make tty_port_block_til_ready() return. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix wrong modem processing in convergence layer type 2daniel.starke@siemens.com
The function gsm_process_modem() exists to handle modem status bits of incoming frames. This includes incoming MSC (modem status command) frames and convergence layer type 2 data frames. The function, however, was only designed to handle MSC frames as it expects the command length. Within gsm_dlci_data() it is wrongly assumed that this is the same as the data frame length. This is only true if the data frame contains only 1 byte of payload. This patch names the length parameter of gsm_process_modem() in a generic manner to reflect its association. It also corrects all calls to the function to handle the variable number of modem status octets correctly in both cases. Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix wrong tty control line for flow controldaniel.starke@siemens.com
tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle(). Both functions propagate the outgoing hardware flow control state to the remote side via MSC (modem status command) frames. The local state is taken from the RTS (ready to send) flag of the tty. However, RTS gets mapped to DTR (data terminal ready), which is wrong. This patch corrects this by mapping RTS to RTS. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix NULL pointer access due to DLCI releasedaniel.starke@siemens.com
The here fixed commit made the tty hangup asynchronous to avoid a circular locking warning. I could not reproduce this warning. Furthermore, due to the asynchronous hangup the function call now gets queued up while the underlying tty is being freed. Depending on the timing this results in a NULL pointer access in the global work queue scheduler. To be precise in process_one_work(). Therefore, the previous commit made the issue worse which it tried to fix. This patch fixes this by falling back to the old behavior which uses a blocking tty hangup call before freeing up the associated tty. Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix proper link termination after failed opendaniel.starke@siemens.com
Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state. This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix encoding of command/response bitdaniel.starke@siemens.com
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the C/R (command/response) bit. Table 1 shows that the actual encoding of the C/R bit is inverted if the associated frame is sent by the responder. The referenced commit fixed here further broke the internal meaning of this bit in the outgoing path by always setting the C/R bit regardless of the frame type. This patch fixes both by setting the C/R bit always consistently for command (1) and response (0) frames and inverting it later for the responder where necessary. The meaning of this bit in the debug output is being preserved and shows the bit as if it was encoded by the initiator. This reflects only the frame type rather than the encoded combination of communication side and frame type. Fixes: cc0f42122a7e ("tty: n_gsm: Modify CR,PF bit when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21tty: n_gsm: fix encoding of control signal octet bit DVdaniel.starke@siemens.com
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side. This patch fixes this behavior by setting the DV bit on the initiator side unconditionally. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21Merge tag 'platform-drivers-x86-v5.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Two small fixes and one hardware-id addition" * tag 'platform-drivers-x86-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: int3472: Add terminator to gpiod_lookup_table platform/x86: asus-wmi: Fix regression when probing for fan curve control platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen)
2022-02-21mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios propertyChristophe Kerello
Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. A new Boolean flag named ignore_wp has been added in nvmem_config. In case ignore_wp is set, it means that the GPIO is handled by the provider. Lets set this flag in MTD layer to avoid the conflict on wp_gpios property. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220220151432.16605-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios propertyChristophe Kerello
Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21Merge tag 'iio-fixes-for-5.17a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for the 5.17 cycle. Several drivers: - Fix a failure to disable runtime in probe error paths. All cases were introduced in the same rework patch. adi,ad7124 - Fix incorrect register masking. adi,ad74413r - Avoid referencing negative array offsets. - Use ngpio size when iterating over mask not numebr of channels. - Fix issue with wrong mask uage getting GPIOs. adi,admv1014 - Drop check on unsigned less than 0. adi,ads16480 - Correctly handle devices that don't have burst mode support. fsl,fxls8962af - Add missing padding needed between address and data for SPI transfers. men_z188 - Fix iomap leak in error path. st,lsm6dsx - Wait for setting time in oneshot reads to get a stable result. ti,tsc2046 - Prevent an array overflow. * tag 'iio-fixes-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot iio: Fix error handling for PM iio: addac: ad74413r: correct comparator gpio getters mask usage iio: addac: ad74413r: use ngpio size when iterating over mask iio: addac: ad74413r: Do not reference negative array offsets iio: adc: men_z188_adc: Fix a resource leak in an error handling path iio: frequency: admv1013: remove the always true condition iio: accel: fxls8962af: add padding to regmap for SPI iio:imu:adis16480: fix buffering for devices with no burst mode iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits iio: adc: tsc2046: fix memory corruption by preventing array overflow
2022-02-21platform/x86: int3472: Add terminator to gpiod_lookup_tableDaniel Scally
Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Fixes: 19d8d6e36b4b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell") Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-02-21net: mdio-ipq4019: add delay after clock enableBaruch Siach
Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f80ac ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21drm/i915/dg2: Print PHY name properly on calibration errorMatt Roper
We need to use phy_name() to convert the PHY value into a human-readable character in the error message. Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com (cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGVVille Syrjälä
If the only thing that is changing is SAGV vs. no SAGV but the number of active planes and the total data rates end up unchanged we currently bail out of intel_bw_atomic_check() early and forget to actually compute the new WGV point mask and thus won't actually enable/disable SAGV as requested. This ends up poorly if we end up running with SAGV enabled when we shouldn't. Usually ends up in underruns. To fix this let's go through the QGV point mask computation if either the data rates/number of planes, or the state of SAGV is changing. v2: Check more carefully if things are changing to avoid the extra calculations/debugs from introducing unwanted overhead Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1 Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com (cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Correctly populate use_sagv_wm for all pipesVille Syrjälä
When changing between SAGV vs. no SAGV on tgl+ we have to update the use_sagv_wm flag for all the crtcs or else an active pipe not already in the state will end up using the wrong watermarks. That is especially bad when we end up with the tighter non-SAGV watermarks with SAGV enabled. Usually ends up in underruns. Cc: stable@vger.kernel.org Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com (cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Disconnect PHYs left connected by BIOS on disabled portsImre Deak
BIOS may leave a TypeC PHY in a connected state even though the corresponding port is disabled. This will prevent any hotplug events from being signalled (after the monitor deasserts and then reasserts its HPD) until the PHY is disconnected and so the driver will not detect a connected sink. Rebooting with the PHY in the connected state also results in a system hang. Fix the above by disconnecting TypeC PHYs on disabled ports. Before commit 64851a32c463e5 the PHY connected state was read out even for disabled ports and later the PHY got disconnected as a side effect of a tc_port_lock/unlock() sequence (during connector probing), hence recovering the port's hotplug functionality. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: <stable@vger.kernel.org> # v5.16+ Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com (cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21drm/i915: Widen the QGV point maskVille Syrjälä
adlp+ adds some extra bits to the QGV point mask. The code attempts to handle that but forgot to actually make sure we can store those bits in the bw state. Fix it. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-21USB: serial: option: add Telit LE910R1 compositionsDaniele Palmas
Add support for the following Telit LE910R1 compositions: 0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21USB: serial: option: add support for DW5829eSlark Xiao
Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below: DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com [ johan: drop unnecessary reservation of interface 1 ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21Revert "USB: serial: ch341: add new Product ID for CH341A"Dmytro Bagrii
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63. CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table. Mode is selected by corresponding jumper setting. Signed-off-by: Dmytro Bagrii <dimich.dmb@gmail.com> Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-02-21soc: imx: gpcv2: Fix clock disabling imbalance in error pathLaurent Pinchart
The imx_pgc_power_down() starts by enabling the domain clocks, and thus disables them in the error path. Commit 18c98573a4cf ("soc: imx: gpcv2: add domain option to keep domain clocks enabled") made the clock enable conditional, but forgot to add the same condition to the error path. This can result in a clock enable/disable imbalance. Fix it. Fixes: 18c98573a4cf ("soc: imx: gpcv2: add domain option to keep domain clocks enabled") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-21PCI: vmd: Prevent recursive locking on interrupt allocationThomas Gleixner
Tejas reported the following recursive locking issue: swapper/0/1 is trying to acquire lock: ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0 but task is already holding lock: ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290 stack backtrace: __mutex_lock+0x9d/0x920 msi_get_virq+0x30/0xc0 pci_irq_vector+0x26/0x30 vmd_msi_init+0xcc/0x210 msi_domain_alloc+0xbf/0x150 msi_domain_alloc_irqs_descs_locked+0x3e/0xb0 __pci_enable_msi_range+0x155/0x290 pci_alloc_irq_vectors_affinity+0xba/0x100 pcie_port_device_register+0x307/0x550 pcie_portdrv_probe+0x3c/0xd0 pci_device_probe+0x95/0x110 This is caused by the VMD MSI code which does a lookup of the Linux interrupt number for an VMD managed MSI[X] vector. The lookup function tries to acquire the already held mutex. Avoid that by caching the Linux interrupt number at initialization time instead of looking it up over and over. Fixes: 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()") Reported-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: linux-pci@vger.kernel.org Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx
2022-02-20Merge tag 'edac_urgent_for_v5.17_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Fix a long-standing struct alignment bug in the EDAC struct allocation code" * tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
generated by cgit (git 2.34.1) at 2025-09-11 16:52:59 +0000