summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-10drm/amdgpu: make convert_ras_err_addr visible outside UMC blockTao Zhou
And change some UMC v12 specific functions to generic version, so the code can be shared. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: store PA with column bits cleared for RAS bad pageTao Zhou
So the code can be simplified, and no need to expose the detail of PA format outside address conversion. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: reduce the mmio writes in kiq settingPrike Liang
There's no need to perform the two MMIO writes in the KIQ Setting registers programmed period, and reducing the MMIO writes will save the driver loading time. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu/sdma4.4.2: implement ring reset callback for sdma4.4.2Jiadong Zhu
Implement sdma queue reset callback via SMU interface. v2: Leverage inst_stop/start functions in reset sequence. Use GET_INST for physical SDMA instance. Disable apu for sdma reset. v3: Rephrase error prints. v4: Remove redundant prints. Remove setting PREEMPT registers as soft reset handles it. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: implement dpm sdma reset functionJiadong Zhu
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6. v2: Add firmware version for the reset message. v3: Add ip version check. Print inst_mask on failure. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: update smu_v13_0_6 smu headerJiadong Zhu
update smu header for sdma soft reset. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: remove redundant RAS error address coversion codeTao Zhou
Only one interface is responsible for the conversion. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/amdgpu: Add support for isp buffersPratap Nirujogi
Add support to create user BOs with MC address for isp using the dma-buf handle exported for the buffers allocated from system memory in isp driver. Export amdgpu_bo_create_kernel() and amdgpu_bo_free_kernel() as well for isp to allocate GTT internal buffers required for fw to run. Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: simplify RAS page retirement in one memory rowTao Zhou
Take R13 and column bits as a whole for UMC v12. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdkfd: pause autosuspend when creating pddJesse.zhang@amd.com
When using MES creating a pdd will require talking to the GPU to setup the relevant context. The code here forgot to wake up the GPU in case it was in suspend, this causes KVM to EFAULT for passthrough GPU for example. This issue can be masked if the GPU was woken up by other things (e.g. opening the KMS node) first and have not yet gone to sleep. v4: do the allocation of proc_ctx_bo in a lazy fashion when the first queue is created in a process (Felix) Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdgpu: fix when the cleaner shader is emittedChristian König
Emitting the cleaner shader must come after the check if a VM switch is necessary or not. Otherwise we will emit the cleaner shader every time and not just when it is necessary because we switched between applications. This can otherwise crash on gang submit and probably decreases performance quite a bit. v2: squash in fix from Srini (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: ee7a846ea27b ("drm/amdgpu: Emit cleaner shader at end of IB submission") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdgpu: Fix ISP HW init issuePratap Nirujogi
ISP hw_init is not called with the recent changes related to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using incorrect max number of IP blocks. Update AMDGPU_IP_BLK_MASK_ALL to use AMD_IP_BLOCK_TYPE_NUM instead of AMDGPU_MAX_IP_NUM to fix the issue. Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12Harish Kasiviswanathan
This information is not available in ip discovery table. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: David Belanger <david.belanger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdkfd: hard-code cacheline size for gfx11Harish Kasiviswanathan
This information is not available in ip discovery table. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: David Belanger <david.belanger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdkfd: Dereference null return valueAndrew Martin
In the function pqm_uninit there is a call-assignment of "pdd = kfd_get_process_device_data" which could be null, and this value was later dereferenced without checking. Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping") Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-05drm/amdkfd: Correct the migration DMA map directionPrike Liang
The SVM DMA device map direction should be set the same as the DMA unmap setting, otherwise the DMA core will report the following warning. Before finialize this solution, there're some discussion on the DMA mapping type(stream-based or coherent) in this KFD migration case, followed by https://lore.kernel.org/all/04d4ab32 -45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/. As there's no dma_sync_single_for_*() in the DMA buffer accessed that because this migration operation should be sync properly and automatically. Give that there's might not be a performance problem in various cache sync policy of DMA sync. Therefore, in order to simplify the DMA direction setting alignment, let's set the DMA map direction as BIDIRECTIONAL. [ 150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930 [ 150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds [ 150.834310] wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii [ 150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G OE 6.10.0-custom #492 [ 150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021 [ 150.834360] RIP: 0010:check_unmap+0x1cc/0x930 [ 150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50 [ 150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086 [ 150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027 [ 150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680 [ 150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850 [ 150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40 [ 150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b [ 150.834377] FS: 00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000 [ 150.834379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0 [ 150.834383] Call Trace: [ 150.834385] <TASK> [ 150.834387] ? show_regs+0x6d/0x80 [ 150.834393] ? __warn+0x8c/0x140 [ 150.834397] ? check_unmap+0x1cc/0x930 [ 150.834400] ? report_bug+0x193/0x1a0 [ 150.834406] ? handle_bug+0x46/0x80 [ 150.834410] ? exc_invalid_op+0x1d/0x80 [ 150.834413] ? asm_exc_invalid_op+0x1f/0x30 [ 150.834420] ? check_unmap+0x1cc/0x930 [ 150.834425] debug_dma_unmap_page+0x86/0x90 [ 150.834431] ? srso_return_thunk+0x5/0x5f [ 150.834435] ? rmap_walk+0x28/0x50 [ 150.834438] ? srso_return_thunk+0x5/0x5f [ 150.834441] ? remove_migration_ptes+0x79/0x80 [ 150.834445] ? srso_return_thunk+0x5/0x5f [ 150.834448] dma_unmap_page_attrs+0xfa/0x1d0 [ 150.834453] svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu] [ 150.834710] svm_migrate_ram_to_vram+0x361/0x740 [amdgpu] [ 150.834914] svm_migrate_to_vram+0xa8/0xe0 [amdgpu] [ 150.835111] svm_range_set_attr+0xff2/0x1450 [amdgpu] [ 150.835311] svm_ioctl+0x4a/0x50 [amdgpu] [ 150.835510] kfd_ioctl_svm+0x54/0x90 [amdgpu] [ 150.835701] kfd_ioctl+0x3c2/0x530 [amdgpu] [ 150.835888] ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu] [ 150.836075] ? srso_return_thunk+0x5/0x5f [ 150.836080] ? tomoyo_file_ioctl+0x20/0x30 [ 150.836086] __x64_sys_ioctl+0x9c/0xd0 [ 150.836091] x64_sys_call+0x1219/0x20d0 [ 150.836095] do_syscall_64+0x51/0x120 [ 150.836098] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 150.836102] RIP: 0033:0x7faf0f11a94f [ 150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f [ 150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003 [ 150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001 [ 150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0 [ 150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000 [ 150.836122] </TASK> [ 150.836124] ---[ end trace 0000000000000000 ]--- Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05drm/amd/pm: Set SMU v13.0.7 default workload typeKenneth Feng
Set the default workload type to bootup type on smu v13.0.7. This is because of the constraint on smu v13.0.7. Gfx activity has an even higher set point on 3D fullscreen mode than the one on bootup mode. This causes the 3D fullscreen mode's performance is worse than the bootup mode's performance for the lightweighted/medium workload. For the high workload, the performance is the same between 3D fullscreen mode and bootup mode. v2: set the default workload in ASIC specific file Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-05drm/amd/pm: Initialize power profile modeLijo Lazar
Refactor such that individual SMU IP versions can choose the startup power profile mode. If no preference, then use the generic default power profile selection logic. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-05amdgpu/uvd: get ring reference from rq schedulerDavid (Ming Qiang) Wu
base.sched may not be set for each instance and should not be used for cases such as non-IB tests. Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05drm/amdgpu: fix UVD contiguous CS mapping problemChristian König
When starting the mpv player, Radeon R9 users are observing the below error in dmesg. [drm:amdgpu_uvd_cs_pass2 [amdgpu]] *ERROR* msg/fb buffer ff00f7c000-ff00f7e000 out of 256MB segment! The patch tries to set the TTM_PL_FLAG_CONTIGUOUS for both user flag(AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS) set and not set cases. v2: Make the TTM_PL_FLAG_CONTIGUOUS mandatory for user BO's. v3: revert back to v1, but fix the check instead (chk). Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3599 Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3501 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.10+
2024-12-05drm/amdgpu: use sjt mec fw on gfx943 for sriovVictor Zhao
Use second jump table in sriov for live migration or mulitple VF support so different VF can load different version of MEC as long as they support sjt Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05Revert "drm/amdgpu: Fix ISP hw init issue"Pratap Nirujogi
This reverts commit 274e3f4596446955bf17680fd4eb5489f5ecac00. Additional review comments to address. Will resubmit. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amdgpu: rework resume handling for display (v2)Alex Deucher
Split resume into a 3rd step to handle displays when DCC is enabled on DCN 4.0.1. Move display after the buffer funcs have been re-enabled so that the GPU will do the move and properly set the DCC metadata for DCN. v2: fix fence irq resume ordering Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02drm/amd/pm: fix and simplify workload handlingAlex Deucher
smu->workload_mask is IP specific and should not be messed with in the common code. The mask bits vary across SMU versions. Move all handling of smu->workload_mask in to the backends and simplify the code. Store the user's preference in smu->power_profile_mode which will be reflected in sysfs. For internal driver profile switches for KFD or VCN, just update the workload mask so that the user's preference is retained. Remove all of the extra now unused workload related elements in the smu structure. v2: use refcounts for workload profiles v3: rework based on feedback from Lijo v4: fix the refcount on failure, drop backend mask v5: rework custom handling v6: handle failure cleanup with custom profile v7: Update documentation Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02Revert "drm/amd/pm: correct the workload setting"Alex Deucher
This reverts commit 74e1006430a5377228e49310f6d915628609929e. This causes a regression in the workload selection. A more extensive fix is being worked on. For now, revert. This came back after a merge in 6.13-rc1, so revert again. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618 Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
2024-12-02drm/amdgpu: fix sriov reinit late ordersYiqing Yao
Use found block to call correct init/resume function on the block. Set status.hw for resume and init. Print re-init result again. Change to use dev_info. Use amdgpu_device_ip_get_ip_block to get target block instead of loop. Fixes: 502d76308d45 ("drm/amdgpu: validate resume before function call") Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdgpu: Fix ISP hw init issuePratap Nirujogi
ISP hw_init is not called with the recent changes related to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using incorrect max number of IP blocks. Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels") Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Limit VTotal range to max hw cap minus fpDillon Varone
[WHY & HOW] Hardware does not support the VTotal to be between fp2 lines of the maximum possible VTotal, so add a capability flag to track it and apply where necessary. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Correct prefetch calculationLo-an Chen
[WHY] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [HOW] Add the min operation of dst_y_prefetch_equ in prefetch calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add option to retrieve detile buffer sizeSung Lee
[WHY] For better power profiling knowing the detile buffer size at a given point in time would be useful. [HOW] Add interface to retrieve detile buffer from dc state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odmPeterson Guo
[WHY] On some cards when odm is used, the monitor will have 2 separate pipes split vertically. When compression is used on the YCbCr colour space on the second pipe to have correct colours, we need to read a pixel from the end of first pipe to accurately display colours. Hardware was programmed properly to account for this extra pixel but it was not calculated properly in software causing a split screen on some monitors. [HOW] The fix adjusts the second pipe's viewport and timings if the pixel encoding is YCbCr422 or YCbCr420. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdkfd: hard-code cacheline for gc943,gc944David Yat Sin
Cacheline size is not available in IP discovery for gc943,gc944. Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12Sreekant Somasekharan
Add MEC version from which alternate support for no PCIe atomics is provided so that device is not skipped during KFD device init in GFX1200/GFX1201. Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02drm/amd/display: Fix programming backlight on OLED panelsMario Limonciello
commit 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") adjusted DC core to require the backlight type to be programmed in the dc link when changing brightness. This isn't initialized in amdgpu_dm for OLED panels though which broke brightness. Explicitly initialize when aux support is enabled. Reported-and-tested-by: Luke Jones <luke@ljones.dev> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792 Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd: Sanity check the ACPI EDIDMario Limonciello
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using it is causing corruption. It's got illogical values of not specifying a digital interface. Sanity check the ACPI EDID to avoid tripping such problems. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782 Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdgpu/hdp7.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp6.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp5.2: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp5.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp4.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/jpeg1.0: fix idle work handlerAlex Deucher
On VCN 1.0, VCN and JPEG use the same worker thread so cancel the vcn worker rather than jpeg. On VCN 2.0 and newer there are separate workers for each. Fixes: 93df74873703 ("drm/amdgpu/jpeg: cancel the jpeg worker") Tested-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-01Merge tag 'i2c-for-6.13-rc1-part3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds" * tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string
2024-12-01Merge tag 'irq_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Move the ->select callback to the correct ops structure in irq-mvebu-sei to fix some Marvell Armada platforms - Add a workaround for Hisilicon ITS erratum 162100801 which can cause some virtual interrupts to get lost - More platform_driver::remove() conversion * tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Switch back to struct platform_driver::remove() irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
2024-11-30Merge tag 'pci-v6.13-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fix from Bjorn Helgaas: - When removing a PCI device, only look up and remove a platform device if there is an associated device node for which there could be a platform device, to fix a merge window regression (Brian Norris) * tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/pwrctrl: Unregister platform device only if one actually exists
2024-11-30Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: - NVMe pull request via Keith: - Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin) - Add the required bits for MD atomic write support for raid0/1/10 - Correct return value for unknown opcode in ublk - Fix deadlock with zone revalidation - Fix for the io priority request vs bio cleanups - Use the correct unsigned int type for various limit helpers - Fix for a race in loop - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make it easier for actual humans to read - Fix potential UAF when iterating tags - A few fixes for bfq-iosched UAF issues - Fix for brd discard not decrementing the allocated page count - Various little fixes and cleanups * tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits) brd: decrease the number of allocated pages which discarded block, bfq: fix bfqq uaf in bfq_limit_depth() block: Don't allow an atomic write be truncated in blkdev_write_iter() mq-deadline: don't call req_get_ioprio from the I/O completion handler block: Prevent potential deadlock in blk_revalidate_disk_zones() block: Remove extra part pointer NULLify in blk_rq_init() nvme: tuning pr code by using defined structs and macros nvme: introduce change ptpl and iekey definition block: return bool from get_disk_ro and bdev_read_only block: remove a duplicate definition for bdev_read_only block: return bool from blk_rq_aligned block: return unsigned int from blk_lim_dma_alignment_and_pad block: return unsigned int from queue_dma_alignment block: return unsigned int from bdev_io_opt block: req->bio is always set in the merge code block: don't bother checking the data direction for merges block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" md/raid10: Atomic write support md/raid1: Atomic write support ...
2024-11-30Merge tag 'sh-for-v6.13-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "Two small fixes. The first one by Huacai Chen addresses a runtime warning when CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS when iterating CPUs instead of the runtime limit nr_cpu_ids. A second fix by Dan Carpenter fixes a use-after-free bug in register_intc_controller() which occurred as a result of improper error handling in the interrupt controller driver code when registering an interrupt controller during plat_irq_setup() on sh" * tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: intc: Fix use-after-free bug in register_intc_controller() sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
2024-11-30Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending on it don't run (and fail) on arm64 - Fix lockdep assert in the Arm SMMUv3 PMU driver - Fix the port and device ID bits setting in the Arm CMN perf driver * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf/arm-cmn: Ensure port and device id bits are set properly perf/arm-smmuv3: Fix lockdep assert in ->event_init() arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
2024-11-30Merge tag 'kbuild-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ...
2024-11-30Merge tag 'rtc-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ...
generated by cgit (git 2.34.1) at 2025-09-14 06:50:31 +0000