| Age | Commit message (Collapse) | Author |
|---|
|
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before
platform_set_drvdata() is executed in ->probe(), leading to a NULL
pointer dereference when using the return of dev_get_drvdata().
Ensure platform_set_drvdata() is called before devm_pm_runtime_enable().
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241023-phy-sam-hdptx-rpm-fix-v1-1-87f4c994e346@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
An unsupported RX filter will leave the port with TX timestamping still
applied as per the new request, rather than the old setting. When
parsing the tx_type, don't apply it just yet, but delay that until after
we've parsed the rx_filter as well (and potentially returned -ERANGE for
that).
Similarly, copy_to_user() may fail, which is a rare occurrence, but
should still be treated by unwinding what was done.
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Felix DSA driver presents unique challenges that make the simplistic
ocelot PTP TX timestamping procedure unreliable: any transmitted packet
may be lost in hardware before it ever leaves our local system.
This may happen because there is congestion on the DSA conduit, the
switch CPU port or even user port (Qdiscs like taprio may delay packets
indefinitely by design).
The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(),
runs out of timestamp IDs eventually, because it never detects that
packets are lost, and keeps the IDs of the lost packets on hold
indefinitely. The manifestation of the issue once the entire timestamp
ID range becomes busy looks like this in dmesg:
mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp
mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp
At the surface level, we need a timeout timer so that the kernel knows a
timestamp ID is available again. But there is a deeper problem with the
implementation, which is the monotonically increasing ocelot_port->ts_id.
In the presence of packet loss, it will be impossible to detect that and
reuse one of the holes created in the range of free timestamp IDs.
What we actually need is a bitmap of 63 timestamp IDs tracking which one
is available. That is able to use up holes caused by packet loss, but
also gives us a unique opportunity to not implement an actual timer_list
for the timeout timer (very complicated in terms of locking).
We could only declare a timestamp ID stale on demand (lazily), aka when
there's no other timestamp ID available. There are pros and cons to this
approach: the implementation is much more simple than per-packet timers
would be, but most of the stale packets would be quasi-leaked - not
really leaked, but blocked in driver memory, since this algorithm sees
no reason to free them.
An improved technique would be to check for stale timestamp IDs every
time we allocate a new one. Assuming a constant flux of PTP packets,
this avoids stale packets being blocked in memory, but of course,
packets lost at the end of the flux are still blocked until the flux
resumes (nobody left to kick them out).
Since implementing per-packet timers is way too complicated, this should
be good enough.
Testing procedure:
Persistently block traffic class 5 and try to run PTP on it:
$ tc qdisc replace dev swp3 parent root taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0xdf 100000 flags 0x2
[ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
$ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3
ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[70.406]: timed out while polling for tx timestamp
ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[70.406]: port 1 (swp3): send peer delay response failed
ptp4l[70.407]: port 1 (swp3): clearing fault immediately
ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1
ptp4l[71.400]: timed out while polling for tx timestamp
ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[71.401]: port 1 (swp3): send peer delay response failed
ptp4l[71.401]: port 1 (swp3): clearing fault immediately
[ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2
ptp4l[72.401]: timed out while polling for tx timestamp
ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[72.402]: port 1 (swp3): send peer delay response failed
ptp4l[72.402]: port 1 (swp3): clearing fault immediately
ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3
ptp4l[73.400]: timed out while polling for tx timestamp
ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[73.400]: port 1 (swp3): send peer delay response failed
ptp4l[73.400]: port 1 (swp3): clearing fault immediately
[ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4
ptp4l[74.400]: timed out while polling for tx timestamp
ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[74.401]: port 1 (swp3): send peer delay response failed
ptp4l[74.401]: port 1 (swp3): clearing fault immediately
ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[75.410]: timed out while polling for tx timestamp
ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[75.411]: port 1 (swp3): send peer delay response failed
ptp4l[75.411]: port 1 (swp3): clearing fault immediately
(...)
Remove the blocking condition and see that the port recovers:
$ same tc command as above, but use "sched-entry S 0xff" instead
$ same ptp4l command as above
ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost
[ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost
[ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost
[ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost
[ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d
ptp4l[104.966]: port 1 (swp3): assuming the grand master role
ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER
[ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0
(...)
Notice that in this new usage pattern, a non-congested port should
basically use timestamp ID 0 all the time, progressing to higher numbers
only if there are unacknowledged timestamps in flight. Compare this to
the old usage, where the timestamp ID used to monotonically increase
modulo OCELOT_MAX_PTP_ID.
In terms of implementation, this simplifies the bookkeeping of the
ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse
the list of two-step timestampable skbs for each new packet anyway, the
information can already be computed and does not need to be stored.
Also, ocelot_port->tx_skbs is always accessed under the switch-wide
ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's
lock and can use the unlocked primitives safely.
This problem was actually detected using the tc-taprio offload, and is
causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959)
supports but Ocelot (VSC7514) does not. Thus, I've selected the commit
to blame as the one adding initial timestamping support for the Felix
switch.
Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as
such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler().
As such, it runs with IRQs enabled, and not in hardirq context. Thus,
ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot
be preempted by ocelot_get_txtstamp(). For the same reason,
dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in
this calling context, so just simplify the dev_kfree_skb_any() call to
kfree_skb().
Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context,
not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the
ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs.
This is part of a larger rework of the TX timestamping procedure.
A logical subportion of the rework has been split into a separate
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This condition, theoretically impossible to trigger, is not really
handled well. By "continuing", we are skipping the write to SYS_PTP_NXT
which advances the timestamp FIFO to the next entry. So we are reading
the same FIFO entry all over again, printing stack traces and eventually
killing the kernel.
No real problem has been observed here. This is part of a larger rework
of the timestamp IRQ procedure, with this logical change split out into
a patch of its own. We will need to "goto next_ts" for other conditions
as well.
Fixes: 9fde506e0c53 ("net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ocelot_port_add_txtstamp_skb() fails, for example due to a full PTP
timestamp FIFO, we must undo the skb_clone_sk() call with kfree_skb().
Otherwise, the reference to the skb clone is lost.
Fixes: 52849bcf0029 ("net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
The commit in Fixes adds a special case when only one possible scale is
available.
If several scales are available, it sets the .read_avail field of the
struct iio_info to ad9467_read_avail().
However, this field already holds this function pointer, so the code is a
no-op.
Use another struct iio_info instead to actually reflect the intent
described in the commit message. This way, the structure to use is selected
at runtime and they can be kept as const.
This is safer because modifying static structs that are shared between all
instances like this, based on the properties of a single instance, is
asking for trouble down the road.
Fixes: b92f94f74826 ("iio: adc: ad9467: don't allow reading vref if not available")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/cc65da19e0578823d29e11996f86042e84d5715c.1733503146.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Current implementation of at91_ts_register() calls input_free_deivce()
on st->ts_input, however, the err label can be reached before the
allocated iio_dev is stored to st->ts_input. Thus call
input_free_device() on input instead of st->ts_input.
Fixes: 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241207043045.1255409-1-joe@pf.is.s.u-tokyo.ac.jp
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix a possible race condition during driver probe in the ad7173 driver
due to using a shared static info struct. If more that one instance of
the driver is probed at the same time, some of the info could be
overwritten by the other instance, leading to incorrect operation.
To fix this, make the static info struct const so that it is read-only
and make a copy of the info struct for each instance of the driver that
can be modified.
Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Tested-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patch.msgid.link/20241127-iio-adc-ad7313-fix-non-const-info-struct-v2-1-b6d7022b7466@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Using gpiod_set_value() to control the reset GPIO causes some verbose
warnings during boot when the reset GPIO is controlled by an I2C IO
expander.
As the caller can sleep, use the gpiod_set_value_cansleep() variant to
fix the issue.
Tested on a custom i.MX93 board with a ADS124S08 ADC.
Cc: stable@kernel.org
Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20241122164308.390340-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-2-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'sample' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the temperature and the
timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp).
This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-3-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'data' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 4e130dc7b413 ("iio: adc: rockchip_saradc: Add support iio buffers")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-4-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: c3a23ecc0901 ("iio: imu: kmx61: Add support for data ready triggers")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-5-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'buffer' local array is used to push data to userspace from a
triggered buffer, but it does not set an initial value for the single
data element, which is an u16 aligned to 8 bytes. That leaves at least
4 bytes uninitialized even after writing an integer value with
regmap_read().
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: ec90b52c07c0 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: eab35358aae7 ("iio: light: ROHM BH1745 colour sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-7-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 61fa5dfa5f52 ("iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-8-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'data' array is allocated via kmalloc() and it is used to push data
to user space from a triggered buffer, but it does not set values for
inactive channels, as it only uses iio_for_each_active_channel()
to assign new values.
Use kzalloc for the memory allocation to avoid pushing uninitialized
information to userspace.
Cc: stable@vger.kernel.org
Fixes: 415f79244757 ("iio: Move IIO Dummy Driver out of staging")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-9-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The test config contained a copy-paste error. The IIO GTS helper test
was errorneously titled as "Test IIO formatting functions" in the
menuconfig.
Change the title of the tests to reflect what is tested.
Fixes: cf996f039679 ("iio: test: test gain-time-scale helpers")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/Z0gt5R86WdeK73u2@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
devm_kasprintf() can return a NULL pointer on failure. A check on the
return value of such a call in ads1298_init() is missing. Add it.
Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20241118090208.14586-1-hanchunchao@inspur.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The label property is defined as optional in the DFSDM binding.
Parse the label property only when it is defined in the device tree.
Fixes: 3208fa0cd919 ("iio: adc: stm32-dfsdm: adopt generic channels bindings")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241114102459.2497178-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Modify ad4695_buffer_preenable() by adding an extra SPI transfer after
each data read to help ensure that the timing requirement between the
last SCLK rising edge and the next CNV rising edge is met. This requires
a restructure of the buf_read_xfer array in ad4695_state. Also define
AD4695_T_SCK_CNV_DELAY_NS to use for each added transfer. Without this
change it is possible for the data to become corrupted on sequential
buffered reads due to the device not properly exiting conversion mode.
Similarly, make adjustments to ad4695_read_one_sample() so that timings
are respected, and clean up the function slightly in the process.
Fixes: 6cc7e4bf2e08 ("iio: adc: ad4695: implement triggered buffer")
Co-developed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Tested-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241113-tgamblin-ad4695_improvements-v2-1-b6bb7c758fc4@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently suspending while sensors are one will result in timestamping
continuing without gap at resume. It can work with monotonic clock but
not with other clocks. Fix that by resetting timestamping.
Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241113-inv_icm42600-fix-timestamps-after-suspend-v1-1-dfc77c394173@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Burst write with SPI is not working for all icm42600 chips. It was
only used for setting user offsets with regmap_bulk_write.
Add specific SPI regmap config for using only single write with SPI.
Fixes: 9f9ff91b775b ("iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241112-inv-icm42600-fix-spi-burst-write-not-supported-v2-1-97690dc03607@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The fxas21002c_trigger_handler() may fail to acquire sample data because
the runtime PM enters the autosuspend state and sensor can not return
sample data in standby mode..
Resume the sensor before reading the sample data into the buffer within the
trigger handler. After the data is read, place the sensor back into the
autosuspend state.
Fixes: a0701b6263ae ("iio: gyro: add core driver for fxas21002c")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241116152945.4006374-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
kunit_kmalloc may fail, return value might be NULL and will cause
NULL pointer dereference.Add KUNIT_ASSERT_NOT_ERR_OR_NULL fix it.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: 8e74a48d17d5 ("iio: test: add basic tests for the iio-rescale driver")
Link: https://patch.msgid.link/ecd56a85e54a96c2f0313c114075a21a76071ea2.1730259869.git.xiaopei01@kylinos.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When during a measurement two channels are enabled, two measurements are
done that are reported sequencially in the DATA register. As the code
triggered by reading one of the sysfs properties expects that only one
channel is enabled it only reads the first data set which might or might
not belong to the intended channel.
To prevent this situation disable all channels during probe. This fixes
a problem in practise because the reset default for channel 0 is
enabled. So all measurements before the first measurement on channel 0
(which disables channel 0 at the end) might report wrong values.
Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241104101905.845737-2-u.kleine-koenig@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
User Perspective:
When a user sets the phase value, the ad9832_write_phase() is called.
The phase register has a 12-bit resolution, so the valid range is 0 to
4095. If the phase offset value of 4096 is input, it effectively exactly
equals 0 in the lower 12 bits, meaning no offset.
Reasons for the Change:
1) Original Condition (phase > BIT(AD9832_PHASE_BITS)):
This condition allows a phase value equal to 2^12, which is 4096.
However, this value exceeds the valid 12-bit range, as the maximum valid
phase value should be 4095.
2) Modified Condition (phase >= BIT(AD9832_PHASE_BITS)):
Ensures that the phase value is within the valid range, preventing
invalid datafrom being written.
Impact on Subsequent Logic: st->data = cpu_to_be16(addr | phase):
If the phase value is 2^12, i.e., 4096 (0001 0000 0000 0000), and addr
is AD9832_REG_PHASE0 (1100 0000 0000 0000), then addr | phase results in
1101 0000 0000 0000, occupying DB12. According to the section of WRITING
TO A PHASE REGISTER in the datasheet, the MSB 12 PHASE0 bits should be
DB11. The original condition leads to incorrect DB12 usage, which
contradicts the datasheet and could pose potential issues for future
updates if DB12 is used in such related cases.
Fixes: ea707584bac1 ("Staging: IIO: DDS: AD9832 / AD9835 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241107011015.2472600-3-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
User Perspective:
When a user sets the phase value, the ad9834_write_phase() is called.
The phase register has a 12-bit resolution, so the valid range is 0 to
4095. If the phase offset value of 4096 is input, it effectively exactly
equals 0 in the lower 12 bits, meaning no offset.
Reasons for the Change:
1) Original Condition (phase > BIT(AD9834_PHASE_BITS)):
This condition allows a phase value equal to 2^12, which is 4096.
However, this value exceeds the valid 12-bit range, as the maximum valid
phase value should be 4095.
2) Modified Condition (phase >= BIT(AD9834_PHASE_BITS)):
Ensures that the phase value is within the valid range, preventing
invalid datafrom being written.
Impact on Subsequent Logic: st->data = cpu_to_be16(addr | phase):
If the phase value is 2^12, i.e., 4096 (0001 0000 0000 0000), and addr
is AD9834_REG_PHASE0 (1100 0000 0000 0000), then addr | phase results in
1101 0000 0000 0000, occupying DB12. According to the section of WRITING
TO A PHASE REGISTER in the datasheet, the MSB 12 PHASE0 bits should be
DB11. The original condition leads to incorrect DB12 usage, which
contradicts the datasheet and could pose potential issues for future
updates if DB12 is used in such related cases.
Fixes: 12b9d5bf76bf ("Staging: IIO: DDS: AD9833 / AD9834 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20241107011015.2472600-2-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If the FW log context memory is retained after FW reset, the existing
code is not handling the condition correctly and zeroes out the data
structures. This potentially will cause a division by zero crash
when the user runs ethtool -w. The last_type is also not set
correctly when the context memory is retained. This will cause errors
because the last_type signals to the FW that all context memory types
have been configured.
Oops: divide error: 0000 1 PREEMPT SMP NOPTI
CPU: 53 UID: 0 PID: 7019 Comm: ethtool Kdump: loaded Tainted: G OE 6.12.0-rc7+ #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Supermicro SYS-621C-TN12R/X13DDW-A, BIOS 1.4 08/10/2023
RIP: 0010:__bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
Code: 0a 31 d2 4c 89 6c 24 10 45 8b a5 fc df ff ff 4c 8b 74 24 20 31 db 66 89 44 24 06 48 63 c5 c1 e5 09 4c 0f af e0 48 8b 44 24 30 <49> f7 f4 4c 89 64 24 08 48 63 c5 4d 89 ec 31 ed 48 89 44 24 18 49
RSP: 0018:ff480591603d78b8 EFLAGS: 00010206
RAX: 0000000000100000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ff23959e46740000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000100000 R09: ff23959e46740000
R10: ff480591603d7a18 R11: 0000000000000010 R12: 0000000000000000
R13: ff23959e46742008 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f04227c1740(0000) GS:ff2395adbf680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f04225b33a5 CR3: 000000108b9a4001 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? die+0x33/0x90
? do_trap+0xd9/0x100
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? do_error_trap+0x65/0x80
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? exc_divide_error+0x36/0x50
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? asm_exc_divide_error+0x16/0x20
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0x86/0x160 [bnxt_en]
? __bnxt_copy_ctx_mem.constprop.0.isra.0+0xda/0x160 [bnxt_en]
bnxt_get_ctx_coredump.constprop.0+0x1ed/0x390 [bnxt_en]
? __memcg_slab_post_alloc_hook+0x21c/0x3c0
? __bnxt_get_coredump+0x473/0x4b0 [bnxt_en]
__bnxt_get_coredump+0x473/0x4b0 [bnxt_en]
? security_file_alloc+0x74/0xe0
? cred_has_capability.isra.0+0x78/0x120
bnxt_get_coredump_length+0x4b/0xf0 [bnxt_en]
bnxt_get_dump_flag+0x40/0x60 [bnxt_en]
__dev_ethtool+0x17e4/0x1fc0
? syscall_exit_to_user_mode+0xc/0x1d0
? do_syscall_64+0x85/0x150
? unmap_page_range+0x299/0x4b0
? vma_interval_tree_remove+0x215/0x2c0
? __kmalloc_cache_noprof+0x10a/0x300
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
? sk_ioctl+0x4a/0x110
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ca/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x79/0x150
Fixes: 24d694aec139 ("bnxt_en: Allocate backing store memory for FW trace logs")
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204215918.1692597-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing code is using RSS profile to determine IPV4/IPV6 GSO type
on all chips older than 5760X. This won't work on 5750X chips that may
be using modified RSS profiles. This commit from 2018 has updated the
driver to not use RSS profile for HW GRO packets on newer chips:
50f011b63d8c ("bnxt_en: Update RSS setup and GRO-HW logic according to the latest spec.")
However, a recent commit to add support for the newest 5760X chip broke
the logic. If the GRO packet needs to be re-segmented by the stack, the
wrong GSO type will cause the packet to be dropped.
Fix it to only use RSS profile to determine GSO type on the oldest
5730X/5740X chips which cannot use the new method and is safe to use the
RSS profiles.
Also fix the L3/L4 hash type for RX packets by not using the RSS
profile for the same reason. Use the ITYPE field in the RX completion
to determine L3/L4 hash types correctly.
Fixes: a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7")
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204215918.1692597-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The caller, ptp_kvm_init(), emits a warning if kvm_arch_ptp_init() exits
with any error which is not EOPNOTSUPP:
"fail to initialize ptp_kvm"
Replace ENODEV with EOPNOTSUPP to avoid this spurious warning,
aligning with the ARM implementation.
Fixes: a86ed2cfa13c ("ptp: Don't print an error if ptp_kvm is not supported")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241203-kvm_ptp-eopnotsuppp-v2-1-d1d060f27aa6@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
|
|
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-04:
amdgpu:
- Jpeg work handler fix for VCN 1.0
- HDP flush fixes
- ACPI EDID sanity check
- OLED panel backlight fix
- DC YCbCr fix
- DC Detile buffer size debugging
- DC prefetch calculation fix
- DC VTotal handling fix
- DC HBlank fix
- ISP fix
- SR-IOV fix
- Workload profile fixes
- DCN 4.0.1 resume fix
amdkfd:
- GC 12.x fix
- GC 9.4.x fix
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206190452.2571042-1-alexander.deucher@amd.com
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes and device ID updates for SPI.
The Apple change flags the driver as being compatible with the core's
GPIO chip select support, fixing support for some systems"
* tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()
spi: intel: Add Panther Lake SPI controller support
spi: apple: Set use_gpio_descriptors to true
spi: mpc52xx: Add cancel_work_sync before module remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
|
|
With the new __counted_by annocation in ljca_gpio_packet, the "num"
struct member must be set before accessing the "item" array. Failing to
do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS
and CONFIG_FORTIFY_SOURCE.
Fixes: 1034cc423f1b ("gpio: update Intel LJCA USB GPIO driver")
Cc: stable@vger.kernel.org
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://lore.kernel.org/stable/20241203141451.342316-1-lihaoyu499%40gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.
EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:
- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;
- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.
Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The platform device named "rzg2l-usb-vbus-regulator", allocated by
the rzg2l-usbphy-ctrl driver, is used to instantiate a regulator driver.
This regulator driver is associated with a device tree (DT) node, which
is a child of the rzg2l-usbphy-ctrl DT node. The regulator's DT node allows
consumer nodes to reference the regulator and configure the regulator as
needed.
Starting with commit cd7a38c40b23 ("regulator: core: do not silently ignore
provided init_data") the struct regulator_dev::dev::of_node is no longer
populated using of_node_get(config->of_node) if the regulator does not
provide init_data. Since the rzg2l-usb-vbus-regulator does not provide
init_data, this behaviour causes the of_find_regulator_by_node() function
to fails, resulting in errors when attempting to request the regulator.
To fix this issue, call device_set_of_node_from_dev() for the
"rzg2l-usb-vbus-regulator" platform device.
Fixes: 84fbd6198766 ("regulator: Add Renesas RZ/G2L USB VBUS regulator driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20241119085554.1035881-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
|
|
Commit 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
triggers warning backtraces on a number of platforms which don't support
IO ports.
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/8250/8250_port.c:470 serial8250_set_defaults+0x148/0x1d8
Unsupported UART type 0
The problem is seen because serial8250_set_defaults() is called for
all members of the serial8250_ports[] array even if that array is
not initialized.
Work around the problem by only displaying the warning if the port
type is not 0 (UPIO_PORT) or if iobase is set for the port.
Fixes: 7c7e6c8924e7 ("tty: serial: handle HAS_IOPORT dependencies")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stafford Horne <shorne@gmail.com>
Link: https://lore.kernel.org/r/20241205143033.2695333-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
