| Age | Commit message (Collapse) | Author |
|---|
|
The EFI platform firmware fallback would clobber any pre-allocated
buffers. Instead, correctly refuse to reallocate when too small (as
already done in the sysfs fallback), or perform allocation normally
when needed.
Fixes: e4c2c0ff00ec ("firmware: Add new platform fallback mechanism and firmware_request_platform()")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the chips in the mv88e6xxx family don't support jumbo
configuration per port. But they do have a chip-wide max frame size that
can be used. Use this to approximate the behaviour of configuring a port
based MTU.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MV88E6190 and MV88E6190X both support per port jumbo configuration
just like the other GE switches. Install the appropriate ops.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MV88E6097 chip does not support configuring jumbo frames. Prior to
commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured
jumbo mode. The refactor accidentally added the function for the 6097.
Remove the erroneous function pointer assignment.
Fixes: 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only declare 'core_nr' if its conditions for use are met.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mvsas/mv_init.c: In function ‘mvs_interrupt’:
drivers/scsi/mvsas/mv_init.c:180:6: warning: variable ‘core_nr’ set but not used [-Wunused-but-set-variable]
drivers/scsi/mvsas/mv_init.c: In function ‘mvs_ioremap’:
drivers/scsi/mvsas/mv_init.c:302:36: warning: variable ‘res_flag’ set but not used [-Wunused-but-set-variable]
[mkp: applied follow-up fixup patch]
Link: https://lore.kernel.org/r/20200721164148.2617584-40-lee.jones@linaro.org
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Marvell <kewei@marvell.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/esas2r/esas2r_log.c:86: warning: Function parameter or member 'level' not described in 'translate_esas2r_event_level_to_kernel'
drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'level' not described in 'esas2r_log_master'
drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'dev' not described in 'esas2r_log_master'
drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'format' not described in 'esas2r_log_master'
drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'args' not described in 'esas2r_log_master'
drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'level' not described in 'esas2r_log'
drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'format' not described in 'esas2r_log'
drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'level' not described in 'esas2r_log_dev'
drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'dev' not described in 'esas2r_log_dev'
drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'format' not described in 'esas2r_log_dev'
drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'level' not described in 'esas2r_log_hexdump'
drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'buf' not described in 'esas2r_log_hexdump'
drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'len' not described in 'esas2r_log_hexdump'
Link: https://lore.kernel.org/r/20200723122446.1329773-41-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2i/bnx2i_iscsi.c:1288: warning: Function parameter or member 'cmds_max' not described in 'bnx2i_session_create'
drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path'
drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path'
Link: https://lore.kernel.org/r/20200723122446.1329773-40-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following checkpatch warning:
CHECK: Please use a blank line after function/struct/union/enum declarations
#129: FILE: drivers/scsi/bfa/bfa_ioc.c:6913:
}
+/*
Link: https://lore.kernel.org/r/20200723122446.1329773-39-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedi/qedi_iscsi.c:1549:7: warning: no previous prototype for ‘qedi_get_iscsi_error’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20200723122446.1329773-38-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is the only use of kerneldoc in the source file and no descriptions
are provided.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedi/qedi_main.c:1969: warning: Function parameter or member 'qedi' not described in 'qedi_get_nvram_block'
Link: https://lore.kernel.org/r/20200723122446.1329773-37-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is the only use of kerneldoc in the source file and no descriptions
are provided.
Also demote standard comment.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_svc.c:3847: warning: Function parameter or member 'bfa' not described in 'bfa_fcport_get_cfg_topology'
Link: https://lore.kernel.org/r/20200723122446.1329773-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is the only use of kerneldoc in the source file and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'bfa' not described in 'bfa_iocfc_qreg'
drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'qreg' not described in 'bfa_iocfc_qreg'
Link: https://lore.kernel.org/r/20200723122446.1329773-35-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is probably historical (Doxygen?).
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_ioc.c:6646: warning: Cannot understand * @brief hardware error definition
drivers/scsi/bfa/bfa_ioc.c:6661: warning: Cannot understand * @brief flash command register data structure
drivers/scsi/bfa/bfa_ioc.c:6685: warning: Cannot understand * @brief flash device status register data structure
drivers/scsi/bfa/bfa_ioc.c:6711: warning: Cannot understand * @brief flash address register data structure
drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'pci_bar' not described in 'bfa_flash_set_cmd'
drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'wr_cnt' not described in 'bfa_flash_set_cmd'
drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'rd_cnt' not described in 'bfa_flash_set_cmd'
drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'ad_cnt' not described in 'bfa_flash_set_cmd'
drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'op' not described in 'bfa_flash_set_cmd'
drivers/scsi/bfa/bfa_ioc.c:6768: warning: Cannot understand * @brief
drivers/scsi/bfa/bfa_ioc.c:6807: warning: Cannot understand * @brief
drivers/scsi/bfa/bfa_ioc.c:6852: warning: Cannot understand * @brief
drivers/scsi/bfa/bfa_ioc.c:6898: warning: Cannot understand * @brief
drivers/scsi/bfa/bfa_ioc.c:6914: warning: Cannot understand * @brief
drivers/scsi/bfa/bfa_ioc.c:6940: warning: Cannot understand * @brief
Link: https://lore.kernel.org/r/20200723122446.1329773-34-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In certain configurations esas2r_bugon() is sometimes NULLed by the compiler.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/esas2r/esas2r_log.c:44:
drivers/scsi/esas2r/esas2r.h: In function ‘esas2r_rq_init_request’:
drivers/scsi/esas2r/esas2r.h:1229:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
1229 | esas2r_bugon();
| ^
NB: Lots of these - snipped for brevity
Link: https://lore.kernel.org/r/20200723122446.1329773-33-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedi/qedi_fw.c: In function ‘qedi_put_rq_bdq_buf’:
drivers/scsi/qedi/qedi_fw.c:355:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200723122446.1329773-32-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Function parameter or member 'ep' not described in 'beiscsi_open_conn'
drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Excess function parameter 'beiscsi_ep' description in 'beiscsi_open_conn'
Link: https://lore.kernel.org/r/20200723122446.1329773-31-lee.jones@linaro.org
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: linux-drivers@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid'
drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid'
drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool'
drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session'
drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session'
drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session'
drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create'
drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active'
drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active'
drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path'
drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path'
drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path'
Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mainly renames and docrot issues.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_get_rq_buf'
drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Excess function parameter 'conn' description in 'bnx2i_get_rq_buf'
drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_put_rq_buf'
drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Excess function parameter 'conn' description in 'bnx2i_put_rq_buf'
drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_sq_dbell'
drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Excess function parameter 'conn' description in 'bnx2i_ring_sq_dbell'
drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_dbell_update_sq_params'
drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Excess function parameter 'conn' description in 'bnx2i_ring_dbell_update_sq_params'
drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_login'
drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_login'
drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_login'
drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_login'
drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_tmf'
drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_tmf'
drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_text'
drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_text'
drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_scsicmd'
drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_scsicmd'
drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_nopout'
drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_nopout'
drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_nopout'
drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_nopout'
drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_logout'
drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_logout'
drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_logout'
drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_logout'
drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Function parameter or member 't' not described in 'bnx2i_ep_ofld_timer'
drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Excess function parameter 'data' description in 'bnx2i_ep_ofld_timer'
drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_unsol_pdu_adjust_rq'
drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Excess function parameter 'conn' description in 'bnx2i_unsol_pdu_adjust_rq'
drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'session' not described in 'bnx2i_queue_scsi_cmd_resp'
drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'cqe' not described in 'bnx2i_queue_scsi_cmd_resp'
drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'context' not described in 'bnx2i_indicate_kcqe'
drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'kcqe' not described in 'bnx2i_indicate_kcqe'
drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'num_cqe' not described in 'bnx2i_indicate_kcqe'
drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'hba' description in 'bnx2i_indicate_kcqe'
drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_indicate_kcqe'
drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_close'
drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_close'
drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_close'
drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_abort'
drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_abort'
drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_abort'
drivers/scsi/bnx2i/bnx2i_hwi.c:2677: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2i_cnic_cb = '
Link: https://lore.kernel.org/r/20200723122446.1329773-29-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_fcs_rport.c: In function ‘bfa_fcs_rport_process_adisc’:
drivers/scsi/bfa/bfa_fcs_rport.c:2243:21: warning: variable ‘adisc’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200723122446.1329773-28-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ctx_hwif'
drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'hwif' not described in 'bfa_ioc_set_ctx_hwif'
drivers/scsi/bfa/bfa_ioc_ct.c:525: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct_hwif'
drivers/scsi/bfa/bfa_ioc_ct.c:540: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct2_hwif'
Link: https://lore.kernel.org/r/20200723122446.1329773-26-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
'fwevt' param
Fixes the following W=1 kernel build warning(s):
drivers/scsi/csiostor/csio_rnode.c:869: warning: Function parameter or member 'fwevt' not described in 'csio_rnode_fwevt_handler'
Link: https://lore.kernel.org/r/20200723122446.1329773-25-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_ioc.c:5023:1: warning: no previous prototype for ‘bfa_diag_intr’ [-Wmissing-prototypes]
5023 | bfa_diag_intr(void *diagarg, struct bfi_mbmsg_s *msg)
| ^~~~~~~~~~~~~
drivers/scsi/bfa/bfa_ioc.c:6966:1: warning: no previous prototype for ‘bfa_flash_sem_get’ [-Wmissing-prototypes]
6966 | bfa_flash_sem_get(void __iomem *bar)
| ^~~~~~~~~~~~~~~~~
drivers/scsi/bfa/bfa_ioc.c:6979:1: warning: no previous prototype for ‘bfa_flash_sem_put’ [-Wmissing-prototypes]
6979 | bfa_flash_sem_put(void __iomem *bar)
| ^~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-24-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_mc_read’:
drivers/scsi/csiostor/csio_hw_t5.c:151:11: warning: variable ‘mc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
151 | uint32_t mc_bist_status_rdata_reg, mc_bist_data_pattern_reg;
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_edc_read’:
drivers/scsi/csiostor/csio_hw_t5.c:199:38: warning: variable ‘edc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
199 | uint32_t edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-23-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/csiostor/csio_hw.c: In function ‘csio_hw_get_vpd_params’:
drivers/scsi/csiostor/csio_hw.c:309:8: warning: variable ‘s’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200723122446.1329773-22-lee.jones@linaro.org
Cc: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_iocpf_sm_fwcheck_entry’:
drivers/scsi/bfa/bfa_ioc.c:704:27: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwver_get’:
drivers/scsi/bfa/bfa_ioc.c:1443:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwsig_invalidate’:
drivers/scsi/bfa/bfa_ioc.c:1665:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_download_fw’:
drivers/scsi/bfa/bfa_ioc.c:1866:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_diag_memtest_done’:
drivers/scsi/bfa/bfa_ioc.c:4766:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_flash_fifo_flush’:
drivers/scsi/bfa/bfa_ioc.c:6787:6: warning: variable ‘t’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200723122446.1329773-21-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_nportdisc.c:1079: warning: Function parameter or member 'ndlp' not described in 'lpfc_release_rpi'
Link: https://lore.kernel.org/r/20200723122446.1329773-20-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Adding, removing and correcting function parameter descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Function parameter or member 'vport' not described in 'lpfc_reg_vpi'
drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'phba' description in 'lpfc_reg_vpi'
drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'vpi' description in 'lpfc_reg_vpi'
drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'sid' description in 'lpfc_reg_vpi'
drivers/scsi/lpfc/lpfc_mbox.c:1218: warning: Function parameter or member 'ring' not described in 'lpfc_config_ring'
drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Function parameter or member 'mboxq' not described in 'lpfc_mbox_tmo_val'
drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Excess function parameter 'cmd' description in 'lpfc_mbox_tmo_val'
drivers/scsi/lpfc/lpfc_mbox.c:1710: warning: Function parameter or member 'sge' not described in 'lpfc_sli4_mbx_sge_get'
drivers/scsi/lpfc/lpfc_mbox.c:1780: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_config'
drivers/scsi/lpfc/lpfc_mbox.c:2027: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli4_mbx_read_fcf_rec'
drivers/scsi/lpfc/lpfc_mbox.c:2078: warning: Function parameter or member 'phba' not described in 'lpfc_request_features'
Link: https://lore.kernel.org/r/20200723122446.1329773-19-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific'
drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific'
drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request'
drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request'
Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_init.c:1136: warning: Function parameter or member 't' not described in 'lpfc_hb_timeout'
drivers/scsi/lpfc/lpfc_init.c:1136: warning: Excess function parameter 'ptr' description in 'lpfc_hb_timeout'
drivers/scsi/lpfc/lpfc_init.c:1170: warning: Function parameter or member 't' not described in 'lpfc_rrq_timeout'
drivers/scsi/lpfc/lpfc_init.c:1170: warning: Excess function parameter 'ptr' description in 'lpfc_rrq_timeout'
drivers/scsi/lpfc/lpfc_init.c:1232: warning: Function parameter or member 'work' not described in 'lpfc_idle_stat_delay_work'
drivers/scsi/lpfc/lpfc_init.c:1817: warning: Function parameter or member 'en_rn_msg' not described in 'lpfc_sli4_port_sta_fn_reset'
drivers/scsi/lpfc/lpfc_init.c:3033: warning: Function parameter or member 'mbx_action' not described in 'lpfc_block_mgmt_io'
drivers/scsi/lpfc/lpfc_init.c:3481: warning: Function parameter or member 'mbx_action' not described in 'lpfc_offline_prep'
drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'phba' not described in 'lpfc_new_io_buf'
drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_io_buf'
drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'vport' description in 'lpfc_new_io_buf'
drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_io_buf'
drivers/scsi/lpfc/lpfc_init.c:4736: warning: Function parameter or member 't' not described in 'lpfc_sli4_fcf_redisc_wait_tmo'
drivers/scsi/lpfc/lpfc_init.c:4736: warning: Excess function parameter 'ptr' description in 'lpfc_sli4_fcf_redisc_wait_tmo'
drivers/scsi/lpfc/lpfc_init.c:5103: warning: Excess function parameter 'evt_code' description in 'lpfc_async_link_speed_to_read_top'
drivers/scsi/lpfc/lpfc_init.c:5377: warning: Function parameter or member 'acqe_sli' not described in 'lpfc_sli4_async_sli_evt'
drivers/scsi/lpfc/lpfc_init.c:5377: warning: Excess function parameter 'acqe_fc' description in 'lpfc_sli4_async_sli_evt'
drivers/scsi/lpfc/lpfc_init.c:5634: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_perform_all_vport_cvl'
drivers/scsi/lpfc/lpfc_init.c:5634: warning: Excess function parameter 'vport' description in 'lpfc_sli4_perform_all_vport_cvl'
drivers/scsi/lpfc/lpfc_init.c:5655: warning: Function parameter or member 'acqe_fip' not described in 'lpfc_sli4_async_fip_evt'
drivers/scsi/lpfc/lpfc_init.c:5655: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_fip_evt'
drivers/scsi/lpfc/lpfc_init.c:5908: warning: Function parameter or member 'acqe_dcbx' not described in 'lpfc_sli4_async_dcbx_evt'
drivers/scsi/lpfc/lpfc_init.c:5908: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_dcbx_evt'
drivers/scsi/lpfc/lpfc_init.c:5927: warning: Function parameter or member 'acqe_grp5' not described in 'lpfc_sli4_async_grp5_evt'
drivers/scsi/lpfc/lpfc_init.c:5927: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_grp5_evt'
drivers/scsi/lpfc/lpfc_init.c:7279: warning: Function parameter or member 'iocb_count' not described in 'lpfc_init_iocb_list'
drivers/scsi/lpfc/lpfc_init.c:8227: warning: Function parameter or member 'if_type' not described in 'lpfc_sli4_bar1_register_memmap'
drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'phba' description in 'LINK_FLAGS_DEF'
drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'rdconf' description in 'LINK_FLAGS_DEF'
drivers/scsi/lpfc/lpfc_init.c:10734: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli_enable_intr'
drivers/scsi/lpfc/lpfc_init.c:11241: warning: Function parameter or member 'eqlist' not described in 'lpfc_cpuhp_get_eq'
drivers/scsi/lpfc/lpfc_init.c:11726: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli4_enable_intr'
drivers/scsi/lpfc/lpfc_init.c:12997: warning: Excess function parameter 'ret' description in 'lpfc_write_firmware'
drivers/scsi/lpfc/lpfc_init.c:13103: warning: Function parameter or member 'fw_upgrade' not described in 'lpfc_sli4_request_firmware_update'
Link: https://lore.kernel.org/r/20200723122446.1329773-17-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_init.c: In function ‘lpfc_dbg_print’:
drivers/scsi/lpfc/lpfc_init.c:14212:6: warning: function ‘lpfc_dbg_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
14212 | sizeof(phba->dbg_log[idx].log), fmt, args);
| ^~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-16-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’:
drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
1409 | int i, status = QLA_SUCCESS;
| ^~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
terminated
Fixes the following W=1 kernel build warning(s):
In file included from arch/arm/include/asm/io.h:23,
from drivers/scsi/ips.c:164:
In function ‘strncpy’,
inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output
truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
NB: Lots of these - snipping for brevity
Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Intentionally keeping all register reads/writes.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ips.c: In function ‘ips_init_copperhead’:
drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
| ^~~~~~~~~~
drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’:
drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
| ^~~~~~~~~~
drivers/scsi/ips.c: In function ‘ips_init_phase1’:
drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable]
6839 | uint8_t func;
| ^~~~
drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable]
6838 | uint8_t bus;
| ^~~
Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedi/qedi_main.c: In function ‘qedi_queue_cqe’:
drivers/scsi/qedi/qedi_main.c:1158:21: warning: variable ‘conn’ set but not used [-Wunused-but-set-variable]
1158 | struct iscsi_conn *conn;
| ^~~~
drivers/scsi/qedi/qedi_main.c: In function ‘__qedi_probe’:
drivers/scsi/qedi/qedi_main.c:2432:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
2432 | u16 tmp;
| ^~~
Link: https://lore.kernel.org/r/20200723122446.1329773-12-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is the only use of kerneldoc in the source file and no descriptions
are provided.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'bfa' not described in 'bfa_fcpim_get_throttle_cfg'
drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'drv_cfg_param' not described in 'bfa_fcpim_get_throttle_cfg'
Link: https://lore.kernel.org/r/20200723122446.1329773-11-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change subsequently makes 'rp_fcs' unused also. Remove that too.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_fcpim.c: In function ‘bfa_fcpim_lunmask_delete’:
drivers/scsi/bfa/bfa_fcpim.c:2338:22: warning: variable ‘rp’ set but not used [-Wunused-but-set-variable]
2338 | struct bfa_rport_s *rp = NULL;
| ^~
Link: https://lore.kernel.org/r/20200723122446.1329773-10-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2i/bnx2i_sysfs.c:40: warning: Function parameter or member 'attr' not described in 'bnx2i_show_sq_info'
drivers/scsi/bnx2i/bnx2i_sysfs.c:60: warning: Function parameter or member 'attr' not described in 'bnx2i_set_sq_info'
drivers/scsi/bnx2i/bnx2i_sysfs.c:96: warning: Function parameter or member 'attr' not described in 'bnx2i_show_ccell_info'
drivers/scsi/bnx2i/bnx2i_sysfs.c:114: warning: Function parameter or member 'attr' not described in 'bnx2i_set_ccell_info'
Link: https://lore.kernel.org/r/20200723122446.1329773-9-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
These calls are not invoked externally.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfa_port.c:760:1: warning: no previous prototype for ‘bfa_cee_isr’ [-Wmissing-prototypes]
760 | bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
| ^~~~~~~~~~~
drivers/scsi/bfa/bfa_port.c:796:1: warning: no previous prototype for ‘bfa_cee_notify’ [-Wmissing-prototypes]
796 | bfa_cee_notify(void *arg, enum bfa_ioc_event_e event)
| ^~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200723122446.1329773-8-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is the only use of kerneldoc in the source file and no descriptions
are provided.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/ufs/ufs-exynos.c:23:
drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'ufs' not described in 'exynos_ufs_auto_ctrl_hcc'
drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'en' not described in 'exynos_ufs_auto_ctrl_hcc'
Link: https://lore.kernel.org/r/20200723122446.1329773-7-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Seungwon Jeon <essuuj@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device'
drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device'
Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ufs/ufs-qcom.c:253: warning: Function parameter or member 'hba' not described in 'ufs_qcom_host_reset'
drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hba' not described in 'ufs_qcom_cfg_timers'
drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'gear' not described in 'ufs_qcom_cfg_timers'
drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hs' not described in 'ufs_qcom_cfg_timers'
drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'rate' not described in 'ufs_qcom_cfg_timers'
drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'update_link_startup_timer' not described in 'ufs_qcom_cfg_timers'
drivers/scsi/ufs/ufs-qcom.c:1738: error: Cannot parse struct or union!
Link: https://lore.kernel.org/r/20200723122446.1329773-4-lee.jones@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_hbadisc.c:1209: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_clear_fcf_rr_bmask'
drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Function parameter or member 'sw_name' not described in 'lpfc_sw_name_match'
drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Excess function parameter 'fab_name' description in 'lpfc_sw_name_match'
drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Function parameter or member 'fcf_rec' not described in 'lpfc_copy_fcf_record'
drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Excess function parameter 'fcf' description in 'lpfc_copy_fcf_record'
drivers/scsi/lpfc/lpfc_hbadisc.c:1956: warning: Cannot understand lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
on line 1956 - I thought it was a doc line
drivers/scsi/lpfc/lpfc_hbadisc.c:2078: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_del'
drivers/scsi/lpfc/lpfc_hbadisc.c:2109: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_set_fcf_flogi_fail'
drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_add'
drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'new_fcf_record' not described in 'lpfc_sli4_fcf_pri_list_add'
Link: https://lore.kernel.org/r/20200723122446.1329773-3-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_els.c:3619: warning: Function parameter or member 't' not described in 'lpfc_els_retry_delay'
drivers/scsi/lpfc/lpfc_els.c:3619: warning: Excess function parameter 'ptr' description in 'lpfc_els_retry_delay'
drivers/scsi/lpfc/lpfc_els.c:4877: warning: Function parameter or member 'rejectError' not described in 'lpfc_els_rsp_reject'
drivers/scsi/lpfc/lpfc_els.c:7900: warning: Function parameter or member 't' not described in 'lpfc_els_timeout'
drivers/scsi/lpfc/lpfc_els.c:7900: warning: Excess function parameter 'ptr' description in 'lpfc_els_timeout'
drivers/scsi/lpfc/lpfc_els.c:8272: warning: Function parameter or member 'payload' not described in 'lpfc_send_els_event'
drivers/scsi/lpfc/lpfc_els.c:8272: warning: Excess function parameter 'cmd' description in 'lpfc_send_els_event'
drivers/scsi/lpfc/lpfc_els.c:8355: warning: Function parameter or member 'tlv' not described in 'lpfc_els_rcv_fpin_li'
drivers/scsi/lpfc/lpfc_els.c:8355: warning: Excess function parameter 'lnk_not' description in 'lpfc_els_rcv_fpin_li'
drivers/scsi/lpfc/lpfc_els.c:9688: warning: Function parameter or member 't' not described in 'lpfc_fabric_block_timeout'
drivers/scsi/lpfc/lpfc_els.c:9688: warning: Excess function parameter 'ptr' description in 'lpfc_fabric_block_timeout'
Link: https://lore.kernel.org/r/20200723122446.1329773-2-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Also move the header block above the correct function.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'dev' not described in 'arp_failure_skb_discard'
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'skb' not described in 'arp_failure_skb_discard'
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'c3cn' description in 'arp_failure_skb_discard'
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'req_completion' description in 'arp_failure_skb_discard'
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Function parameter or member 'csk' not described in 'l2t_put'
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Excess function parameter 'c3cn' description in 'l2t_put'
Link: https://lore.kernel.org/r/20200721164148.2617584-41-lee.jones@linaro.org
Cc: Karen Xie <kxie@chelsio.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Only declare 'tp' and 'lp' if they are going to be used.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_error’:
drivers/scsi/sym53c8xx_2/sym_hipd.c:5356:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]
drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_ok’:
drivers/scsi/sym53c8xx_2/sym_hipd.c:5485:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20200721164148.2617584-39-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sym53c8xx_2/sym_glue.c:1784: warning: Function parameter or member 'pdev' not described in 'sym2_reset_workarounds'
Link: https://lore.kernel.org/r/20200721164148.2617584-38-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
'pg_addr' is only used when CONFIG_X86 is defined. So only declare it if
CONFIG_X86 is defined.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
drivers/scsi/lpfc/lpfc_sli.c:15813:16: warning: unused variable ‘pg_addr’ [-Wunused-variable]
15813 | unsigned long pg_addr;
| ^~~~~~~
Link: https://lore.kernel.org/r/20200721164148.2617584-37-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bfa/bfad_bsg.c:19:1: warning: no previous prototype for ‘bfad_iocmd_ioc_enable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:42:1: warning: no previous prototype for ‘bfad_iocmd_ioc_disable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:150:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_fwstats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:180:1: warning: no previous prototype for ‘bfad_iocmd_ioc_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:198:1: warning: no previous prototype for ‘bfad_iocmd_ioc_set_name’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:212:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:223:1: warning: no previous prototype for ‘bfad_iocmd_ioc_fw_sig_inv’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:235:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_set_intr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:248:1: warning: no previous prototype for ‘bfad_iocmd_port_enable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:269:1: warning: no previous prototype for ‘bfad_iocmd_port_disable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:319:1: warning: no previous prototype for ‘bfad_iocmd_port_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:353:1: warning: no previous prototype for ‘bfad_iocmd_port_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:374:1: warning: no previous prototype for ‘bfad_iocmd_set_port_cfg’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:394:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_maxfrsize’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:408:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_bbcr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:431:1: warning: no previous prototype for ‘bfad_iocmd_port_get_bbcr_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:469:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:493:1: warning: no previous prototype for ‘bfad_iocmd_lport_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:527:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_iostats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:552:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_rports’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:594:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:680:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:721:1: warning: no previous prototype for ‘bfad_iocmd_rport_clr_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:757:1: warning: no previous prototype for ‘bfad_iocmd_rport_set_speed’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:793:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:816:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:844:1: warning: no previous prototype for ‘bfad_iocmd_vport_clr_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:911:1: warning: no previous prototype for ‘bfad_iocmd_qos_set_bw’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:924:1: warning: no previous prototype for ‘bfad_iocmd_ratelim’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:953:1: warning: no previous prototype for ‘bfad_iocmd_ratelim_speed’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:982:1: warning: no previous prototype for ‘bfad_iocmd_cfg_fcpim’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:995:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_modstats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1017:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_clr_modstats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1039:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_del_itn_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1164:1: warning: no previous prototype for ‘bfad_iocmd_fcport_enable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1177:1: warning: no previous prototype for ‘bfad_iocmd_fcport_disable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1190:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_pcifn_cfg’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1212:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_create’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1235:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_delete’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1257:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_bw’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1281:1: warning: no previous prototype for ‘bfad_iocmd_adapter_cfg_mode’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1304:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_mode’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1328:1: warning: no previous prototype for ‘bfad_iocmd_ablk_optrom’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1354:1: warning: no previous prototype for ‘bfad_iocmd_faa_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1377:1: warning: no previous prototype for ‘bfad_iocmd_cee_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1413:1: warning: no previous prototype for ‘bfad_iocmd_cee_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1450:1: warning: no previous prototype for ‘bfad_iocmd_cee_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1464:1: warning: no previous prototype for ‘bfad_iocmd_sfp_media’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1486:1: warning: no previous prototype for ‘bfad_iocmd_sfp_speed’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1507:1: warning: no previous prototype for ‘bfad_iocmd_flash_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1528:1: warning: no previous prototype for ‘bfad_iocmd_flash_erase_part’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1548:1: warning: no previous prototype for ‘bfad_iocmd_flash_update_part’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1580:1: warning: no previous prototype for ‘bfad_iocmd_flash_read_part’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1612:1: warning: no previous prototype for ‘bfad_iocmd_diag_temp’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1634:1: warning: no previous prototype for ‘bfad_iocmd_diag_memtest’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1657:1: warning: no previous prototype for ‘bfad_iocmd_diag_loopback’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1680:1: warning: no previous prototype for ‘bfad_iocmd_diag_fwping’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1704:1: warning: no previous prototype for ‘bfad_iocmd_diag_queuetest’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1725:1: warning: no previous prototype for ‘bfad_iocmd_diag_sfp’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1748:1: warning: no previous prototype for ‘bfad_iocmd_diag_led’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1761:1: warning: no previous prototype for ‘bfad_iocmd_diag_beacon_lport’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1776:1: warning: no previous prototype for ‘bfad_iocmd_diag_lb_stat’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1791:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_enable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1813:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_disable’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1833:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_start’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1858:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_show’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1873:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1894:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1915:1: warning: no previous prototype for ‘bfad_iocmd_phy_read’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1947:1: warning: no previous prototype for ‘bfad_iocmd_vhba_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1966:1: warning: no previous prototype for ‘bfad_iocmd_phy_update’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:1996:1: warning: no previous prototype for ‘bfad_iocmd_porglog_get’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2016:1: warning: no previous prototype for ‘bfad_iocmd_debug_fw_core’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2050:1: warning: no previous prototype for ‘bfad_iocmd_debug_ctl’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2071:1: warning: no previous prototype for ‘bfad_iocmd_porglog_ctl’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2085:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_profile’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2129:1: warning: no previous prototype for ‘bfad_iocmd_fcport_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2154:1: warning: no previous prototype for ‘bfad_iocmd_fcport_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2178:1: warning: no previous prototype for ‘bfad_iocmd_boot_cfg’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2200:1: warning: no previous prototype for ‘bfad_iocmd_boot_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2222:1: warning: no previous prototype for ‘bfad_iocmd_preboot_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2241:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_cfg’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2264:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2287:1: warning: no previous prototype for ‘bfad_iocmd_cfg_trunk’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2327:1: warning: no previous prototype for ‘bfad_iocmd_trunk_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2350:1: warning: no previous prototype for ‘bfad_iocmd_qos’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2378:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2404:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_vc_attr’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2436:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2468:1: warning: no previous prototype for ‘bfad_iocmd_qos_reset_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2499:1: warning: no previous prototype for ‘bfad_iocmd_vf_get_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2522:1: warning: no previous prototype for ‘bfad_iocmd_vf_clr_stats’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2559:1: warning: no previous prototype for ‘bfad_iocmd_lunmask’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2582:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_lunmask_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2596:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_lunmask’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2615:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_query’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2630:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_set’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2645:1: warning: no previous prototype for ‘bfad_iocmd_tfru_read’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2667:1: warning: no previous prototype for ‘bfad_iocmd_tfru_write’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2689:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_read’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2711:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_update’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:2733:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_get_max_size’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3181:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sgaddr_cb’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3193:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sglen_cb’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3203:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sgaddr_cb’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3215:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sglen_cb’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3225:1: warning: no previous prototype for ‘bfad_send_fcpt_cb’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3240:1: warning: no previous prototype for ‘bfad_fcxp_map_sg’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3284:1: warning: no previous prototype for ‘bfad_fcxp_free_mem’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3302:1: warning: no previous prototype for ‘bfad_fcxp_bsg_send’ [-Wmissing-prototypes]
drivers/scsi/bfa/bfad_bsg.c:3342:1: warning: no previous prototype for ‘bfad_im_bsg_els_ct_request’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20200721164148.2617584-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
