summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-10-05usb: cdc-acm: add quirk to blacklist ETAS ES58X devicesVincent Mailhol
The ES58X devices has a CDC ACM interface (used for debug purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load: usbcore: registered new interface driver etas_es58x usb 1-1.1: new full-speed USB device number 14 using xhci_hcd usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4 usb 1-1.1: Manufacturer: ETAS GmbH usb 1-1.1: SerialNumber: 2204355 cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device Thus, these have been added to the ignore list in drivers/usb/class/cdc-acm.c N.B. Future firmware release of the ES58X will remove the CDC-ACM interface. `lsusb -v` of the three devices variant (ES581.4, ES582.1 and ES584.1): Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0159 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES581.4 iSerial 3 2204355 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0035 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Bus Powered Configuration bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 4 ACM Control Interface CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 0 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0168 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES582 iSerial 3 0108933 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0169 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES584.1 iSerial 3 0100320 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge back cpufreq material for 5.10.Rafael J. Wysocki
2020-10-05Merge back cpuidle material for 5.10.Rafael J. Wysocki
* pm-cpuidle: cpuidle: record state entry rejection statistics cpuidle: psci: Allow PM domain to be initialized even if no OSI mode firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode ACPI: processor: Print more information when acpi_processor_evaluate_cst() fails cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()
2020-10-05USB: serial: ftdi_sio: use cur_altsetting for consistencyMychaela N. Falconia
ftdi_determine_type() function had this construct in it to get the number of the interface it is operating on: inter = serial->interface->altsetting->desc.bInterfaceNumber; Elsewhere in this driver cur_altsetting is used instead for this purpose. Change ftdi_determine_type() to use cur_altsetting for consistency. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [ johan: fix old style issues; drop braces and random white space ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05intel_th: pci: Add Alder Lake CPU supportAlexander Shishkin
This adds support for the Trace Hub in Alder Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-9-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05intel_th: pci: Add Alder Lake-S supportAlexander Shishkin
This adds support for the Trace Hub in Alder Lake-S. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-8-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Use different channel accroding to CPUTingwei Zhang
To avoid mixup of packets from differnt ftrace packets simultaneously, use different channel for packets from different CPU. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Enable supported trace export flagTingwei Zhang
Set flags for trace_export. Export function trace, event trace and trace marker to stm. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Change dependency to TRACINGTingwei Zhang
We will support copying event trace to STM. Change STM_SOURCE_FTRACE to depend on TRACING since we will support multiple tracers. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge tag 'extcon-next-for-5.10-v2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Detailed description for this pull request: 1. Update extcon driver with minor updates: - Covert the devicetree binding format from txt to yaml and edit the bidning document for extcon-ptn5150.c. - Clean-up the code of extcon-ptn5150.c without any behavior changes. - Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c. - Return the proper error code on extcon-max14577/max77693/max77843.c. - Simplify with dev_err_probe() on extcon-palmas.c. - Use module_platform_driver to simplify the code on extcon-axp288.c. 2. Update MAINTAINERS - Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver to provide review, feedback and testing. * tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: (25 commits) extcon: axp288: Use module_platform_driver to simplify the code extcon: ptn5150: Do not print error during probe if nothing is attached extcon: ptn5150: Use defines for registers extcon: palmas: Simplify with dev_err_probe() extcon: max8997: Return error code of extcon_dev_allocate() extcon: max77843: Return error code of extcon_dev_allocate() extcon: max77693: Return error code of extcon_dev_allocate() extcon: max14577: Return error code of extcon_dev_allocate() extcon: ptn5150: Set the VBUS and POLARITY property capability extcon: ptn5150: Switch to GENMASK() and BIT() macros extcon: ptn5150: Deduplicate parts of dev_err_probe() extcon: Replace HTTP links with HTTPS ones MAINTAINERS: Add entry for NXP PTN5150A CC driver extcon: ptn5150: Convert to .probe_new extcon: ptn5150: Convert to module_i2c_driver extcon: ptn5150: Reduce the amount of logs on deferred probe extcon: ptn5150: Make 'vbus-gpios' optional extcon: ptn5150: Check current USB mode when probing extcon: ptn5150: Lower the noisiness of probe extcon: ptn5150: Simplify getting vbus-gpios with flags ...
2020-10-05platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuseAaron Ma
Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b896fd ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-10-05mmc: sdhci-acpi: AMDI0040: Set SDHCI_QUIRK2_PRESET_VALUE_BROKENRaul E Rangel
This change fixes HS400 tuning for devices with invalid presets. SDHCI presets are not currently used for eMMC HS/HS200/HS400, but are used for DDR52. The HS400 retuning sequence is: HS400->DDR52->HS->HS200->Perform Tuning->HS->HS400 This means that when HS400 tuning happens, we transition through DDR52 for a very brief period. This causes presets to be enabled unintentionally and stay enabled when transitioning back to HS200 or HS400. Some firmware has invalid presets, so we end up with driver strengths that can cause I/O problems. Fixes: 34597a3f60b1 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200928154718.1.Icc21d4b2f354e83e26e57e270dc952f5fe0b0a40@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-05USB: serial: option: Add Telit FT980-KS compositionLeonid Bloch
This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch <lb.workbox@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPILee Jones
drivers/mfd/kempld-core.c:556:36: warning: unused variable 'kempld_acpi_table' [-Wunused-const-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-10-05mfd: sl28cpld: Depend on I2CLee Jones
Fixes the following randconfig build error: ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe': simple-mfd-i2c.c:(.text+0x48): undefined reference to `__devm_regmap_init_i2c' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_init': simple-mfd-i2c.c:(.init.text+0x14): undefined reference to `i2c_register_driver' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_exit': simple-mfd-i2c.c:(.exit.text+0xd): undefined reference to `i2c_del_driver' Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-10-05staging: r8188eu: remove unnecessary type casts (struct wlan_bssid_ex *)Ivan Safonov
Reduce line length, simplify refactoring. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20201004060921.8908-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _cancel_timer with del_timer_syncRoss Schmidt
Replace _cancel_timer with API function del_timer_sync. One instance of del_timer_sync is moved and an unnecessary pair of spin locks are removed. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-8-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_BE16 with get_unaligned_be16Ross Schmidt
Replace RTW_GET_BE16 macro with get_unlaligned_be16. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-7-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_LE16 with get_unaligned_le16Ross Schmidt
Replace RTW_GET_LE16 macro with get_unaligned_le16. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-6-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_BE24 with get_unaligned_be24Ross Schmidt
Replace RTW_GET_BE24 macro with get_unaligned_be24. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-5-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: remove unused macrosRoss Schmidt
Remove several macros in osdep_service.h because they are not used. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-4-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _RND8 with round_up()Ross Schmidt
Use round_up instead of inline _RND8. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-3-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _RND4 with round_up()Ross Schmidt
Use round_up instead of inline _RND4. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-2-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RND4 with round_up()Ross Schmidt
Use round_up instead of define RND4. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-1-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: qlge: fix build breakage with dumping enabledCoiby Xu
This fixes commit 0107635e15ac ("staging: qlge: replace pr_err with netdev_err") which introduced an build breakage of missing `struct ql_adapter *qdev` for some functions and a warning of type mismatch with dumping enabled, i.e., $ make CFLAGS_MODULE="-DQL_ALL_DUMP -DQL_OB_DUMP -DQL_CB_DUMP \ -DQL_IB_DUMP -DQL_REG_DUMP -DQL_DEV_DUMP" M=drivers/staging/qlge qlge_dbg.c: In function ‘ql_dump_ob_mac_rsp’: qlge_dbg.c:2051:13: error: ‘qdev’ undeclared (first use in this function); did you mean ‘cdev’? 2051 | netdev_err(qdev->ndev, "%s\n", __func__); | ^~~~ qlge_dbg.c: In function ‘ql_dump_routing_entries’: qlge_dbg.c:1435:10: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘int’ [-Wformat=] 1435 | "%s: Routing Mask %d = 0x%.08x\n", | ~^ | | | char * | %d 1436 | i, value); | ~ | | | int qlge_dbg.c:1435:37: warning: format ‘%x’ expects a matching ‘unsigned int’ argument [-Wformat=] 1435 | "%s: Routing Mask %d = 0x%.08x\n", | ~~~~^ | | | unsigned int Note that now ql_dump_rx_ring/ql_dump_tx_ring won't check if the passed parameter is a null pointer. Fixes: 0107635e15ac ("staging: qlge: replace pr_err with netdev_err") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201002235941.77062-1-coiby.xu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge 5.9-rc8 into staging-nextGreg Kroah-Hartman
We need the IIO fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05dmaengine: rcar-dmac: drop double zeroingJulia Lawall
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(*x),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-10-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: sh: drop double zeroingJulia Lawall
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(*x),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1600601186-7420-5-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: ioat: Allocate correct size for descriptor chunkLogan Gunthorpe
dma_alloc_coherent() is called with a fixed SZ_2M size, but frees happen with IOAT_CHUNK_SIZE. Recently, IOAT_CHUNK_SIZE was reduced to 512M but the allocation did not change. To fix, change to using the IOAT_CHUNK_SIZE define. This was caught with the upcoming patchset for converting Intel platforms to the dma-iommu implementation. It has a warning when the unmapped size differs from the mapped size. Fixes: a02254f8a676 ("dmaengine: ioat: Decreasing allocation chunk size 2M->512K") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/intel-gfx/776771a2-247a-d1be-d882-bee02d919ae0@deltatee.com/ Link: https://lore.kernel.org/r/20200922200844.2982-1-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_bynameZhang Qilong
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200921093701.102208-1-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: fsl: remove bad channel updateVinod Koul
Commit 59cd818763e8 ("dmaengine: fsl: convert tasklets to use new tasklet_setup() API") broke this driver by not removing the old channel update method. Fix this by remove the offending call as channel is queried from tasklet structure. Fixes: 59cd818763e8 ("dmaengine: fsl: convert tasklets to use new tasklet_setup() API") Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201001164740.178977-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_statusPaul Cercueil
The jz4780_dma_tx_status() function would check if a channel's cookie state was set to 'completed', and if not, it would enter the critical section. However, in that time frame, the jz4780_dma_chan_irq() function was able to set the cookie to 'completed', and clear the jzchan->vchan pointer, which was deferenced in the critical section of the first function. Fix this race by checking the channel's cookie state after entering the critical function and not before. Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller") Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-04xen: remove redundant initialization of variable retJing Xiangfeng
After commit 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock"), the variable ret is being initialized with '-ENOMEM' that is meaningless. So remove it. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Link: https://lore.kernel.org/r/20200919031702.32192-1-jingxiangfeng@huawei.com Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-04xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*()Souptick Joarder
In 2019, we introduced pin_user_pages*() and now we are converting get_user_pages*() to the new API as appropriate. [1] & [2] could be referred for more information. This is case 5 as per document [1]. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: David Vrabel <david.vrabel@citrix.com> Link: https://lore.kernel.org/r/1599375114-32360-2-git-send-email-jrdr.linux@gmail.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-04xen/gntdev.c: Mark pages as dirtySouptick Joarder
There seems to be a bug in the original code when gntdev_get_page() is called with writeable=true then the page needs to be marked dirty before being put. To address this, a bool writeable is added in gnt_dev_copy_batch, set it in gntdev_grant_copy_seg() (and drop `writeable` argument to gntdev_get_page()) and then, based on batch->writeable, use set_page_dirty_lock(). Fixes: a4cdb556cae0 (xen/gntdev: add ioctl for grant copy) Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1599375114-32360-1-git-send-email-jrdr.linux@gmail.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-04net: mvneta: fix double free of txq->bufTom Rix
clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d74f6 ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: team: fix memory leak in __team_options_registerAnant Thazhemadam
The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04media: zoran.rst: place it at the right place this timeMauro Carvalho Chehab
I was too quick moving zoran.rst... it ends that the original patch didn't do the right thing and forgot to update the files that references it. Fix it. Fixes: 6b90346919d4 ("media: zoran: move documentation file to the right place") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-04hwmon: (bt1-pvt) Wait for the completion with timeoutSerge Semin
If the PVT sensor is suddenly powered down while a caller is waiting for the conversion completion, the request won't be finished and the task will hang up on this procedure until the power is back up again. Let's call the wait_for_completion_timeout() method instead to prevent that. The cached timeout is exactly what we need to predict for how long conversion could normally last. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (bt1-pvt) Cache current update timeoutSerge Semin
Instead of converting the update timeout data to the milliseconds each time on the read procedure let's preserve the currently set timeout in the dedicated driver private data cache. The cached value will be then used in the timeout read method and in the alarm-less data conversion to prevent the caller task hanging up in case if the PVT sensor is suddenly powered down. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (bt1-pvt) Test sensor power supply on probeSerge Semin
Baikal-T1 PVT sensor has got a dedicated power supply domain (feed up by the external GPVT/VPVT_18 pins). In case if it isn't powered up, the registers will be accessible, but the sensor conversion just won't happen. Due to that an attempt to read data from any PVT sensor will cause the task hanging up. For instance that will happen if XP11 jumper isn't installed on the Baikal-T1-based BFK3.1 board. Let's at least test whether the conversion work on the device probe procedure. By doing so will make sure that the PVT sensor is powered up at least at boot time. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200920110924.19741-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (lm75) Add regulator supportAlban Bedel
Add regulator support for boards where the sensor first need to be powered up before it can be used. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Link: https://lore.kernel.org/r/20201001145738.17326-4-alban.bedel@aerq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: Add hwmon driver for Intel MAX 10 BMCXu Yilun
This patch adds hwmon functionality for Intel MAX 10 BMC chip. This BMC chip connects to a set of sensor chips to monitor current, voltage, thermal and power of different components on board. The BMC firmware is responsible for sensor data sampling and recording in shared registers. Host driver reads the sensor data from these shared registers and exposes them to users as hwmon interfaces. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1600669071-26235-3-git-send-email-yilun.xu@intel.com [groeck: Adjusted subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controllerVadim Pasternak
Add support for mp295 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase controller. This device: - Supports two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail 2. - Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for configuration. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20200926204957.10268-2-vadimp@nvidia.com [groeck: Cleaned up a couple of error returns; fixed up API changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (tmp513) fix spelling typo in commentsWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1601086116-32218-1-git-send-email-wangqing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (amd_energy) Improve the accumulation logicNaveen Krishna Chatradhi
Factor out the common code in the accumulation functions for core and socket accumulation. While at it, handle the return value of the amd_create_sensor() function. Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200929105322.8919-4-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04Merge tag 'v5.9-rc7' into patchworkMauro Carvalho Chehab
Linux 5.9-rc7 * tag 'v5.9-rc7': (683 commits) Linux 5.9-rc7 mm/thp: Split huge pmds/puds if they're pinned when fork() mm: Do early cow for pinned pages during fork() for ptes mm/fork: Pass new vma pointer into copy_page_range() mm: Introduce mm_struct.has_pinned mm: validate pmd after splitting mm: don't rely on system state to detect hot-plug operations mm: replace memmap_context by meminit_context arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback lib/memregion.c: include memregion.h lib/string.c: implement stpcpy mm/migrate: correct thp migration stats mm/gup: fix gup_fast with dynamic page table folding mm: memcontrol: fix missing suffix of workingset_restore mm, THP, swap: fix allocating cluster for swapfile by mistake mm: slab: fix potential double free in ___cache_free Documentation/llvm: Fix clang target examples io_uring: ensure async buffered read-retry is setup properly KVM: SVM: Add a dedicated INVD intercept routine io_uring: don't unconditionally set plug->nowait = true ...
2020-10-04vhost-vdpa: fix page pinning leakage in error pathSi-Wei Liu
Pinned pages are not properly accounted particularly when mapping error occurs on IOTLB update. Clean up dangling pinned pages for the error path. As the inflight pinned pages, specifically for memory region that strides across multiple chunks, would need more than one free page for book keeping and accounting. For simplicity, pin pages for all memory in the IOVA range in one go rather than have multiple pin_user_pages calls to make up the entire region. This way it's easier to track and account the pages already mapped, particularly for clean-up in the error path. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-3-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-04vhost-vdpa: fix vhost_vdpa_map() on error conditionSi-Wei Liu
vhost_vdpa_map() should remove the iotlb entry just added if the corresponding mapping fails to set up properly. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:41:40 +0000