summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-01-31drm/amdgpu: Fix the warning info in mode1 resetMa Jun
Fix the warning info below during mode1 reset. [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000006] ? show_regs+0x6e/0x80 [ +0.000011] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000005] ? __warn+0x91/0x150 [ +0.000009] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000006] ? report_bug+0x19d/0x1b0 [ +0.000013] ? handle_bug+0x46/0x80 [ +0.000012] ? exc_invalid_op+0x1d/0x80 [ +0.000011] ? asm_exc_invalid_op+0x1f/0x30 [ +0.000014] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000007] ? __flush_work.isra.0+0x208/0x390 [ +0.000007] ? _prb_read_valid+0x216/0x290 [ +0.000008] __cancel_work_timer+0x11d/0x1a0 [ +0.000007] ? try_to_grab_pending+0xe8/0x190 [ +0.000012] cancel_work_sync+0x14/0x20 [ +0.000008] amddrm_sched_stop+0x3c/0x1d0 [amd_sched] [ +0.000032] amdgpu_device_gpu_recover+0x29a/0xe90 [amdgpu] This warning info was printed after applying the patch "drm/sched: Convert drm scheduler to use a work queue rather than kthread". The root cause is that amdgpu driver tries to use the uninitialized work_struct in the struct drm_gpu_scheduler v2: - Rename the function to amdgpu_ring_sched_ready and move it to amdgpu_ring.c (Alex) v3: - Fix a few more checks based on Vitaly's patch (Alex) v4: - squash in fix noticed by Bert in https://gitlab.freedesktop.org/drm/amd/-/issues/3139 Fixes: 11b3b9f461c5 ("drm/sched: Check scheduler ready before calling timeout handling") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: Fix dcn35 8k30 Underflow/Corruption IssueFangzhi Zuo
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: Underflow workaround by increasing SR exit latencyNicholas Susanto
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: fix incorrect mpc_combine array sizeWenjing Liu
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: Fix DPSTREAM CLK on and off sequenceDmytro Laktyushkin
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: fix USB-C flag update after enc10 feature initCharlene Liu
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhzSohaib Nadeem
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31Revert "drm/amd/display: initialize all the dpm level's stutter latency"Charlene Liu
Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amdkfd: Use correct drm device for cgroup permission checkMukul Joshi
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from XCP manager when checking for cgroup permissions. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amdkfd: Use S_ENDPGM_SAVED in trap handlerJay Cornwall
This instruction has no functional difference to S_ENDPGM but allows performance counters to track save events correctly. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31drm/amdkfd: Correct partial migration virtual addrPhilip Yang
Partial migration to system memory should use migrate.addr, not prange->start as virtual address to allocate system memory page. Fixes: a546a2768440 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31binder: signal epoll threads of self-workCarlos Llamas
In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: Arve Hjønnevåg <arve@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Steven Moreland <smoreland@google.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-31drm/amdgpu: move the drm client creation behind drm device registrationLe Ma
This patch is to eliminate interrupt warning below: "[drm] Fence fallback timer expired on ring sdma0.0". An early vm pt clearing job is sent to SDMA ahead of interrupt enabled. And re-locating the drm client creation following after drm_dev_register looks like a more proper flow. v2: wrap the drm client creation Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles") Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-31Input: bcm5974 - check endpoint type before starting trafficJavier Carrasco
syzbot has found a type mismatch between a USB pipe and the transfer endpoint, which is triggered by the bcm5974 driver[1]. This driver expects the device to provide input interrupt endpoints and if that is not the case, the driver registration should terminate. Repros are available to reproduce this issue with a certain setup for the dummy_hcd, leading to an interrupt/bulk mismatch which is caught in the USB core after calling usb_submit_urb() with the following message: "BOGUS urb xfer, pipe 1 != type 3" Some other device drivers (like the appletouch driver bcm5974 is mainly based on) provide some checking mechanism to make sure that an IN interrupt endpoint is available. In this particular case the endpoint addresses are provided by a config table, so the checking can be targeted to the provided endpoints. Add some basic checking to guarantee that the endpoints available match the expected type for both the trackpad and button endpoints. This issue was only found for the trackpad endpoint, but the checking has been added to the button endpoint as well for the same reasons. Given that there was never a check for the endpoint type, this bug has been there since the first implementation of the driver (f89bd95c5c94). [1] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 Fixes: f89bd95c5c94 ("Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+348331f63b034f89b622@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20231007-topic-bcm5974_bulk-v3-1-d0f38b9d2935@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six small fixes. Five are obvious and in drivers. The last one is a core fix to remove the host lock acquisition and release, caused by a dynamic check of host_busy, in the error handling loop which has been reported to cause lockups" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: storvsc: Fix ring buffer size calculation scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler scsi: MAINTAINERS: Update ibmvscsi_tgt maintainer scsi: initio: Remove redundant variable 'rb' scsi: virtio_scsi: Remove duplicate check if queue is broken scsi: isci: Fix an error code problem in isci_io_request_build()
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for p54spiBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Prism54 SPI wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-7-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wcn36xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcomm Atheros WCN3660/3680 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-6-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for ar5523Breno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atheros AR5523 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-5-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl1251 and wl12xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI wireless drivers wl12xx and wl1251. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-3-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wlcoreBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WLAN wlcore drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-2-leitao@debian.org
2024-01-31PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold
A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
2024-01-31dma-buf: heaps: Don't track CMA dma-buf pages under RssFileT.J. Mercier
DMA buffers allocated from the CMA dma-buf heap get counted under RssFile for processes that map them and trigger page faults. In addition to the incorrect accounting reported to userspace, reclaim behavior was influenced by the MM_FILEPAGES counter until linux 6.8, but this memory is not reclaimable. [1] Change the CMA dma-buf heap to set VM_PFNMAP on the VMA so MM does not poke at the memory managed by this dma-buf heap, and use vmf_insert_pfn to correct the RSS accounting. The system dma-buf heap does not suffer from this issue since remap_pfn_range is used during the mmap of the buffer, which also sets VM_PFNMAP on the VMA. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/mm/vmscan.c?id=fb46e22a9e3863e08aef8815df9f17d0f4b9aede Fixes: b61614ec318a ("dma-buf: heaps: Add CMA heap to dmabuf heaps") Signed-off-by: T.J. Mercier <tjmercier@google.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240117181141.286383-1-tjmercier@google.com
2024-01-31ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x partsLennert Buytenhek
ASMedia have confirmed that all ASM106x parts currently listed in ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran into on the ASM1061, and therefore, we need to apply the quirk added by commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers") to the other supported ASM106x parts as well. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/ Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org> [cassel: add link to ASMedia confirmation email] Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-31HID: bpf: use __bpf_kfunc instead of noinlineBenjamin Tissoires
Follow the docs at Documentation/bpf/kfuncs.rst: - declare the function with `__bpf_kfunc` - disables missing prototype warnings, which allows to remove them from include/linux/hid-bpf.h Removing the prototypes is not an issue because we currently have to redeclare them when writing the BPF program. They will eventually be generated by bpftool directly AFAIU. Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: actually free hdev memory after attaching a HID-BPF programBenjamin Tissoires
Turns out that I got my reference counts wrong and each successful bus_find_device() actually calls get_device(), and we need to manually call put_device(). Ensure each bus_find_device() gets a matching put_device() when releasing the bpf programs and fix all the error paths. Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: remove double fdget()Benjamin Tissoires
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget(): one for fetching the type of the bpf program, and one for actually attaching the program to the device. The problem is that between those two calls, we have no guarantees that the prog_fd is still the same file descriptor for the given program. Solve this by calling bpf_prog_get() earlier, and use this to fetch the program type. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31USB: serial: option: add Fibocom FM101-GL variantPuliang Lu
Update the USB serial option driver support for the Fibocom FM101-GL LTE modules as there are actually several different variants. - VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) 0x01a3:mbim,gnss Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a3 Rev=05.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=5ccd5cd4 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Puliang Lu <puliang.lu@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-31pinctrl: amd: Add IRQF_ONESHOT to the interrupt requestMario Limonciello
On some systems the interrupt is shared between GPIO controller and ACPI SCI. When the interrupt is shared with the ACPI SCI the flags need to be identical. This should fix the GPIO controller failing to work after commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI"). ``` [ 0.417335] genirq: Flags mismatch irq 9. 00000088 (pinctrl_amd) vs. 00002080 (acpi) [ 0.420073] amd_gpio: probe of AMDI0030:00 failed with error -16 ``` Cc: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218407 Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iRqUXeuKmC_+dAJtDBLWQ3x15n4gRH48y7MEaLoXF+UA@mail.gmail.com/T/#mc5506014141b61e472b24e095889535a04458083 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20240123180818.3994-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-30Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe) This series contains updates to e1000e and ixgbe drivers. Jake corrects values used for maximum frequency adjustment for e1000e. Christophe Jaillet adjusts error handling path so that semaphore is released on ixgbe. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550() e1000e: correct maximum frequency adjustment values ==================== Link: https://lore.kernel.org/r/20240129185240.787397-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30misc: open-dice: Fix spurious lockdep warningWill Deacon
When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key: | INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator. Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Brazdil <dbrazdil@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30misc: fastrpc: Mark all sessions as invalid in cb_removeEkansh Gupta
In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30Input: xpad - add Lenovo Legion Go controllersBrenton Simpson
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30efi/libstub: Add one kernel-doc commentYang Li
Add the description of @memory_type to silence the warning: drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ardb: tweak comment] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDRArd Biesheuvel
The EFI stub's kernel placement logic randomizes the physical placement of the kernel by taking all available memory into account, and picking a region at random, based on a random seed. When KASLR is disabled, this seed is set to 0x0, and this results in the lowest available region of memory to be selected for loading the kernel, even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is typically reserved for the GFP_DMA region, to accommodate masters that can only access the first 16 MiB of system memory. Even if such devices are rare these days, we may still end up with a warning in the kernel log, as reported by Tom: swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 Fix this by tweaking the random allocation logic to accept a low bound on the placement, and set it to LOAD_PHYSICAL_ADDR. Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Reported-by: Tom Englund <tomenglund26@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30soc: apple: mailbox: error pointers are negative integersLinus Torvalds
In an entirely unrelated discussion where I pointed out a stupid thinko of mine, Rasmus piped up and noted that that obvious mistake already existed elsewhere in the kernel tree. An "error pointer" is the negative error value encoded as a pointer, making the whole "return error or valid pointer" use-case simple and straightforward. We use it all over the kernel. But the key here is that errors are _negative_ error numbers, not the horrid UNIX user-level model of "-1 and the value of 'errno'". The Apple mailbox driver used the positive error values, and thus just returned invalid normal pointers instead of actual errors. Of course, the reason nobody ever noticed is that the errors presumably never actually happen, so this is fixing a conceptual bug rather than an actual one. Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-30dm writecache: allow allocations larger than 2GiBMikulas Patocka
The function kvmalloc_node limits the allocation size to INT_MAX. This limit will be overflowed if dm-writecache attempts to map a device with 1TiB or larger length. This commit changes kvmalloc_array to vmalloc_array to avoid the limit. The commit also changes vmalloc(array_size()) to vmalloc_array(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm stats: limit the number of entriesMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. Linus said that there should be limits that prevent this warning from being hit. This commit adds the limits to the dm-stats subsystem in DM core. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm: limit the number of targets and parameter size areaMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. The warning was triggered by a syscall testing robot. In order to avoid the warning, this commit limits the number of targets to 1048576 and the size of the parameter area to 1073741824. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren
If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-30spi: sh-msiof: avoid integer overflow in constantsWolfram Sang
cppcheck rightfully warned: drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow] sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1); Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30regulator (max5970): Fix IRQ handlerPatrick Rudolph
The max5970 datasheet gives the impression that IRQ status bits must be cleared by writing a one to set bits, as those are marked with 'R/C', however tests showed that a zero must be written. Fixes an IRQ storm as the interrupt handler actually clears the IRQ status bits. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30USB: serial: qcserial: add new usb-id for Dell Wireless DW5826eJackBB Wu
Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218. It is 0x413c:0x8217 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8217 Rev= 5.04 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is 0x413c:0x8218 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8218 Rev= 0.00 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: JackBB Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30USB: serial: cp210x: add ID for IMST iM871A-USBLeonard Dallmayr
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30net: stmmac: dwmac-imx: set TSO/TBS TX queues default settingsEsben Haabendal
TSO and TBS cannot coexist. For now we set i.MX Ethernet QOS controller to use the first TX queue with TSO and the rest for TBS. TX queues with TBS can support etf qdisc hw offload. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30net: stmmac: do not clear TBS enable bit on link up/downEsben Haabendal
With the dma conf being reallocated on each call to stmmac_open(), any information in there is lost, unless we specifically handle it. The STMMAC_TBS_EN bit is set when adding an etf qdisc, and the etf qdisc therefore would stop working when link was set down and then back up. Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-29net: dsa: qca8k: fix illegal usage of GPIOMichal Vokáč
When working with GPIO, its direction must be set either when the GPIO is requested by gpiod_get*() or later on by one of the gpiod_direction_*() functions. Neither of this is done here which results in undefined behavior on some systems. As the reset GPIO is used right after it is requested here, it makes sense to configure it as GPIOD_OUT_HIGH right away. With that, the following gpiod_set_value_cansleep(1) becomes redundant and can be safely removed. Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 09:50:52 +0000