| Age | Commit message (Collapse) | Author |
|---|
|
In the s3 suspend abort case some type of gfx9 power
rail not turn off from FCH side and this will put the
GPU in an unknown power status, so let's reset the gpu
to a known good power state before reinitialize gpu
device.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
I recently changed the alignment code in dw_pcie_ep_raise_msix_irq(). The
code in dw_pcie_ep_raise_msi_irq() is similar, so update it to match, just
for consistency. (No effect on runtime, just a cleanup).
Link: https://lore.kernel.org/r/184097e0-c728-42c7-9e8a-556bd33fb612@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The "msg_addr" variable is u64. However, the "aligned_offset" is an
unsigned int. This means that when the code does:
msg_addr &= ~aligned_offset;
it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do
the alignment instead.
Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support")
Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org>
|
|
The functions and the attribute listed in the comment doesn't exists in
the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store()
and nvme_passthru_err_log_enabled_show())
Update the comment with right function names and a comment
ns->head->passthru_err_log_enabled,
nvme_io_passthru_err_log_enabled_store() and
nvme_io_passthru_err_log_enabled_show().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc4
This time we have unusually large wireless pull request. Several
functionality fixes to both stack and iwlwifi. Lots of fixes to
warnings, especially to MODULE_DESCRIPTION().
* tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
wifi: mt76: mt7996: fix fortify warning
wifi: brcmfmac: Adjust n_channels usage for __counted_by
wifi: iwlwifi: do not announce EPCS support
wifi: iwlwifi: exit eSR only after the FW does
wifi: iwlwifi: mvm: fix a battery life regression
wifi: mac80211: accept broadcast probe responses on 6 GHz
wifi: mac80211: adding missing drv_mgd_complete_tx() call
wifi: mac80211: fix waiting for beacons logic
wifi: mac80211: fix unsolicited broadcast probe config
wifi: mac80211: initialize SMPS mode correctly
wifi: mac80211: fix driver debugfs for vif type change
wifi: mac80211: set station RX-NSS on reconfig
wifi: mac80211: fix RCU use in TDLS fast-xmit
wifi: mac80211: improve CSA/ECSA connection refusal
wifi: cfg80211: detect stuck ECSA element in probe resp
wifi: iwlwifi: remove extra kernel-doc
wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers
wifi: fill in MODULE_DESCRIPTION()s for wilc1000
wifi: fill in MODULE_DESCRIPTION()s for wl18xx
wifi: fill in MODULE_DESCRIPTION()s for p54spi
...
====================
Link: https://lore.kernel.org/r/20240206095722.CD9D2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The kernel build regressions/improvements email contained a couple of
issues with old compilers (in fact all the reports were on different
architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET()
conversions. They're all because an integer #define that should have
been declared as unsigned, was shifted to the point that it could set
the sign bit.
The fix just involves making sure the defines use the "U" identifier on
the constants to make sure they're unsigned. Should make the checkers
happier.
Confirmed with objdump before/after that there is no change to the
binaries.
Issues were reported as follows:
./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET'
(FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US))
^
./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’
orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver);
^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’
u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M,
^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’
oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype);
^
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice
Fixes: 62589808d73b ("i40e: field get conversion")
Fixes: 5a259f8e0baf ("ice: field get conversion")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.
To fix the issue without introducing a new lock, split the statics into
three parts:
1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,
Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.
Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().
For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats.
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot triggered a warning [1] in __alloc_pages():
WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)
Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")
Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)
[1]:
WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
__alloc_pages+0x308/0x698 mm/page_alloc.c:4543
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
__kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
__do_kmalloc_node mm/slub.c:3969 [inline]
__kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
__alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
__netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
dev_alloc_skb include/linux/skbuff.h:3248 [inline]
ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
receive_buf drivers/tty/tty_buffer.c:444 [inline]
flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we are bus manager and the bus has inconsistent gap counts, send a
bus reset immediately instead of trying to read the root node's config
ROM first. Otherwise, we could spend a lot of time trying to read the
config ROM but never succeeding.
This eliminates a 50+ second delay before the FireWire bus is usable after
a newly connected device is powered on in certain circumstances.
The delay occurs if a gap count inconsistency occurs, we are not the root
node, and we become bus manager. One scenario that causes this is with a TI
XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being
connected to the FireWire cable. In this configuration, the Linux box will
not receive the initial PHY configuration packet sent by the DSR-25 as IRM,
resulting in the DSR-25 having a gap count of 44 while the Linux box has a
gap count of 63.
FireWire devices have a gap count parameter, which is set to 63 on power-up
and can be changed with a PHY configuration packet. This determines the
duration of the subaction and arbitration gaps. For reliable communication,
all nodes on a FireWire bus must have the same gap count.
A node may have zero or more of the following roles: root node, bus manager
(BM), isochronous resource manager (IRM), and cycle master. Unless a root
node was forced with a PHY configuration packet, any node might become root
node after a bus reset. Only the root node can become cycle master. If the
root node is not cycle master capable, the BM or IRM should force a change
of root node.
After a bus reset, each node sends a self-ID packet, which contains its
current gap count. A single bus reset does not change the gap count, but
two bus resets in a row will set the gap count to 63. Because a consistent
gap count is required for reliable communication, IEEE 1394a-2000 requires
that the bus manager generate a bus reset if it detects that the gap count
is inconsistent.
When the gap count is inconsistent, build_tree() will notice this after the
self identification process. It will set card->gap_count to the invalid
value 0. If we become bus master, this will force bm_work() to send a bus
reset when it performs gap count optimization.
After a bus reset, there is no bus manager. We will almost always try to
become bus manager. Once we become bus manager, we will first determine
whether the root node is cycle master capable. Then, we will determine if
the gap count should be changed. If either the root node or the gap count
should be changed, we will generate a bus reset.
To determine if the root node is cycle master capable, we read its
configuration ROM. bm_work() will wait until we have finished trying to
read the configuration ROM.
However, an inconsistent gap count can make this take a long time.
read_config_rom() will read the first few quadlets from the config ROM. Due
to the gap count inconsistency, eventually one of the reads will time out.
When read_config_rom() fails, fw_device_init() calls it again until
MAX_RETRIES is reached. This takes 50+ seconds.
Once we give up trying to read the configuration ROM, bm_work() will wake
up, assume that the root node is not cycle master capable, and do a bus
reset. Hopefully, this will resolve the gap count inconsistency.
This change makes bm_work() check for an inconsistent gap count before
waiting for the root node's configuration ROM. If the gap count is
inconsistent, bm_work() will immediately do a bus reset. This eliminates
the 50+ second delay and rapidly brings the bus to a working state.
I considered that if the gap count is inconsistent, a PHY configuration
packet might not be successful, so it could be desirable to skip the PHY
configuration packet before the bus reset in this case. However, IEEE
1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY
configuration packet before a bus reset when correcting a gap count error.
Since the standard endorses this, I decided it's safe to retain the PHY
configuration packet transmission.
Normally, after a topology change, we will reset the bus a maximum of 5
times to change the root node and perform gap count optimization. However,
if there is a gap count inconsistency, we must always generate a bus reset.
Otherwise the gap count inconsistency will persist and communication will
be unreliable. For that reason, if there is a gap count inconstency, we
generate a bus reset even if we already reached the 5 reset limit.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
DDPP is copied from Synopsys Data book:
DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.
The macro name should be XGMAC_DPP_DISABLE.
Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add DRM_IVPU_JOB_STATUS_ABORTED to indicate that the job was aborted
by the driver due to e.g. TDR or user context MMU faults.
This will help UMD and tests distinguish if job was aborted by the FW
or the driver.
Signed-off-by: Grzegorz Trzebiatowski <grzegorz.trzebiatowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-8-jacek.lawrynowicz@linux.intel.com
|
|
This parameter was never used by the 40xx FW.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-7-jacek.lawrynowicz@linux.intel.com
|
|
All recent 40xx firmware already supports D0i3 entry message and this
WA is no longer needed.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-6-jacek.lawrynowicz@linux.intel.com
|
|
NPU does not require this delay regardless of the generation.
All generations are integrated into the SOC.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-4-jacek.lawrynowicz@linux.intel.com
|
|
Do not use kernel CIRC_SPACE and CIRC_CNT that
incorrectly return space of a queue when wrap bit was set.
Use correct implementation that compares producer, consumer and
wrap bit values.
Without this fix it was possible to lose events in case when event
queue was full.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-3-jacek.lawrynowicz@linux.intel.com
|
|
Set AW_SNOOP_OVERRIDE bit in VPU_37/40XX_HOST_IF_TCU_PTW_OVERRIDES
to force snooping for MMU write accesses (setting event queue events).
MMU event queue buffer is the only buffer written by MMU and
mapped as write-back which break cache coherency. Force write
transactions to be snooped solving the problem.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-2-jacek.lawrynowicz@linux.intel.com
|
|
This change uses the appropriate _cansleep or non-sleeping API for
reading GPIO read-only state. This allows users with GPIOs that
never sleepbeing called in atomic context.
Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow
non-sleeping GPIO cd").
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
by BIOS
Driver shall switch clock source from DLL clock to
OPE clock when power off card to ensure that card
can be identified with OPE clock by BIOS.
Signed-off-by: Fred Ai <fred.ai@bayhubtech.com>
Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Rather then loop over entities until one with a ready job is found,
re-queue the run job worker when drm_sched_entity_pop_job() returns NULL.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 66dbd9004a55 ("drm/sched: Drain all entities in DRM sched run job worker")
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130030413.2031009-1-matthew.brost@intel.com
|
|
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com
Reviewed-by: Stanley Jhu <chu.stanley@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LUNs going into "failed ready running" state observed on >1T and on even
numbers of size (2T, 4T, 6T, 8T and 10T). The issue occurs when DIF is
enabled at the host.
The kernel logs:
Cannot setup S/G List for HBAIO segs 1/1 SGL 512 SCSI 256: 3 0
The host lpfc driver is failing to setup scatter/gather list (protection
data) for the I/Os.
The return type lpfc_bg_setup_sgl()/lpfc_bg_setup_sgl_prot() causes the
compiler to remove the most significant bit. Use an unsigned type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: added commit message]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20231220162658.12392-1-dwagner@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler")
Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Copy cck and ofdm separately in order to avoid __read_overflow2_field
warning.
Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
|
|
Function nvkm_gsp_radix3_sg() uses nvkm_gsp_mem objects to allocate the
radix3 tables, but it unnecessarily creates those objects manually
instead of using the standard nvkm_gsp_mem_ctor() function like the
rest of the code does.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-2-ttabi@nvidia.com
|
|
Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of
these buffers are never dealloced. Some of them can be deallocated
right after GSP-RM is initialized, but the rest need to stay until the
driver unloads.
Also futher bullet-proof these objects by poisoning the buffer and
clearing the nvkm_gsp_mem object when it is deallocated. Poisoning
the buffer should trigger an error (or crash) from GSP-RM if it tries
to access the buffer after we've deallocated it, because we were wrong
about when it is safe to deallocate.
Finally, change the mem->size field to a size_t because that's the same
type that dma_alloc_coherent expects.
Cc: <stable@vger.kernel.org> # v6.7
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-1-ttabi@nvidia.com
|
|
Timur pointed this out before, and it just slipped my mind,
but this might help some things work better, around pcie power
management.
Cc: <stable@vger.kernel.org> # v6.7
Fixes: 8d55b0a940bb ("nouveau/gsp: add some basic registry entries.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130032643.2498315-1-airlied@gmail.com
|
|
drm-intel-fixes
gvt-fixes-2024-02-05
- Fix broken gvt doc link (Zhenyu)
- Fix one uninitialized variable bug in warning (Dan)
- Update Zhi's new email address in MAINTAINERS file. (Zhi)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZcBULqJAL2CWJoHh@debian-scheme
|
|
Merge the last drm-misc-next-fixes tag that fell through the cracks.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.
The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.
The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.
We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.
Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.
This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.
Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code prints the wrong variable in the warning message. It should
print "i" instead of "info->offset". On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
01.org is dead so replace old gvt link with current wiki page.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20230804040544.1972958-1-zhenyuw@linux.intel.com
|
|
Currently, coretemp driver supports only 128 cores per package.
This loses some core temperature information on systems that have more
than 128 cores per package.
[ 58.685033] coretemp coretemp.0: Adding Core 128 failed
[ 58.692009] coretemp coretemp.0: Adding Core 129 failed
...
Enlarge the limitation to 512 because there are platforms with more than
256 cores per package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
the ASPEED_PTCR_RESULT Register can only hold the result for a
single fan input. Adding a mutex to protect the register until the
reading is done.
Signed-off-by: Loic Prylli <lprylli@netflix.com>
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.
Cc: stable@vger.kernel.org
Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy driver fixes from Vinod Koul:
- TI null pointer dereference
- missing erdes mux entry in lan966x driver
- Return of error code in renesas driver
- Serdes init sequence and register offsets for IPQ drivers
* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
phy: lan966x: Add missing serdes mux entry
phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
|
|
CPER events don't have UUIDs. Therefore UUIDs were removed from the
records passed to trace events and replaced with hard coded values.
As pointed out by Jonathan, the new defines for the UUIDs present a more
efficient way to assign UUID in trace records.[1]
Replace memcpy's with the use of static data.
[1] https://lore.kernel.org/all/20240108132325.00000e9c@Huawei.com/
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
