| Age | Commit message (Collapse) | Author |
|---|
|
HFPLLs are the main frequency source for Krait CPU clocks. Add
support for changing the rate of these PLLs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Now that we have the ability to configure the basic settings on the device
we can start allocating and configuring a netdev for the interface.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds the basic defines and structures needed by the PF for
operation. With this it is possible to bring up the interface,
but without being able to configure any of the filters on
the interface itself.
Add skeleton for a function pointers.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds the beginning framework onto which I am going to add
the igc driver which supports the Intel(R) I225-LM/I225-V 2.5G
Ethernet Controller.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)
Fix this by sanitizing num before using it to index
fsg_opts->common->luns
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i.MX6Q has MMDC0 ipg clock in CCM CCGR, add it into
clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
i.MX6SL has MMDC0 and MMDC1 ipg clock in CCM CCGR, add them into
clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
i.MX6SLL has MMDC1 ipg clock in CCM CCGR, add it into
clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
i.MX6SX has MMDC1 ipg clock in CCM CCGR, add it into
clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
i.MX6UL has MMDC1 ipg clock in CCM CCGR, add it into
clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Allow the unit tests to verify the retrieval of the dirty shutdown
count via smart commands, and allow the driver-load-time retrieval of
the smart health payload to be simulated by nfit_test.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Move all the DT backward compatibility code to its own file so it can be
deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the at91sam9rl SoC.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the at91sam9x5 SoCs
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the at91sam9260, at91sam9261,
at91am9263 and at91sam9g20 SoCs.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the sama5d2
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the sama5d4
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Make i signed to fix signedness bug]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a new DT lookup function to lookup for PMC clocks.
Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the
platforms are converted.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a new strut to handle references to all the PMC clocks and implement
allocation/free helpers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Include pmc.h]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Set gck->audio_pll_allowed in at91_clk_register_generated. This makes it
easier to do it from code that is not parsing device tree.
Also, this fixes an issue where the resulting clk_hw can be dereferenced
before being tested for error.
Fixes: 1a1a36d72e3d ("clk: at91: clk-generated: make gclk determine audio_pll rate")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Separate registration out of of_sama5d2_clk_audio_pll*_setup to allow other
code to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[sboyd@kernel.org: Include pmc.h]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Some NVDIMMs, in addition to providing an indication of whether the
previous shutdown was clean, also provide a running count of lifetime
dirty-shutdown events for the device. In anticipation of this
functionality appearing on more devices arrange for the nfit driver to
retrieve / cache this data at DIMM discovery time, and export it via
sysfs.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create a configfs attribute in each nvme-fabrics namespace to enable P2P
memory use. The attribute may be enabled (with a boolean) or a specific
P2P device may be given (with the device's PCI name).
When enabled, the namespace will ensure the underlying block device
supports P2P and is compatible with any specified P2P device. If no device
was specified it will ensure there is compatible P2P memory somewhere in
the system. Enabling a namespace with P2P memory will fail with EINVAL
(and an appropriate dmesg error) if any of these conditions are not met.
Once a controller is set up on a specific port, the P2P device to use for
each namespace will be found and stored in a radix tree by namespace ID.
When memory is allocated for a request, the tree is used to look up the P2P
device to allocate memory against. If no device is in the tree (because no
appropriate device was found), or if allocation of P2P memory fails, fall
back to using regular memory.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
[hch: partial rewrite of the initial code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add helpers to allocate and free the SGL in a struct nvmet_req:
int nvmet_req_alloc_sgl(struct nvmet_req *req)
void nvmet_req_free_sgl(struct nvmet_req *req)
This will be expanded in a future patch to implement peer-to-peer memory
DMAs and should be common with all target drivers.
The new helpers are used in nvmet-rdma. Seeing we use req.transfer_len as
the length of the SGL it is set earlier and cleared on any error. It also
seems to be unnecessary to accumulate the length as the map_sgl functions
should only ever be called once per request.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
|
|
For P2P requests, we must use the pci_p2pmem_map_sg() function instead of
the dma_map_sg functions.
With that, we can then indicate PCI_P2P support in the request queue. For
this, we create an NVME_F_PCI_P2P flag which tells the core to set
QUEUE_FLAG_PCI_P2P in the request queue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Register the CMB buffer as p2pmem and use the appropriate allocation
functions to create and destroy the IO submission queues.
If the CMB supports WDS and RDS, publish it for use as P2P memory by other
devices.
Kernels without CONFIG_PCI_P2PDMA will also no longer support NVMe CMB.
However, seeing the main use-cases for the CMB is P2P operations, this
seems like a reasonable dependency.
We drop the __iomem safety on the buffer seeing that, by convention, it's
safe to directly access memory mapped by memremap()/devm_memremap_pages().
Architectures where this is not safe will not be supported by memremap()
and therefore will not support PCI P2P and have no support for CMB.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In order to use PCI P2P memory the pci_p2pmem_map_sg() function must be
called to map the correct PCI bus address.
To do this, check the first page in the scatter list to see if it is P2P
memory or not. At the moment, scatter lists that contain P2P memory must
be homogeneous so if the first page is P2P the entire SGL should be P2P.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Users of the P2PDMA infrastructure will typically need a way for the user
to tell the kernel to use P2P resources. Typically this will be a simple
on/off boolean operation but sometimes it may be desirable for the user to
specify the exact device to use for the P2P operation.
Add new helpers for attributes which take a boolean or a PCI device. Any
boolean as accepted by strtobool() turn P2P on or off (such as 'y', 'n',
'1', '0', etc). Specifying a full PCI device name/BDF will select the
specific device.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The DMA address used when mapping PCI P2P memory must be the PCI bus
address. Thus, introduce pci_p2pmem_map_sg() to map the correct addresses
when using P2P memory.
Memory mapped in this way does not need to be unmapped and thus if we
provided pci_p2pmem_unmap_sg() it would be empty. This breaks the expected
balance between map/unmap but was left out as an empty function doesn't
really provide any benefit. In the future, if this call becomes necessary
it can be added without much difficulty.
For this, we assume that an SGL passed to these functions contain all P2P
memory or no P2P memory.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add a sysfs group to display statistics about P2P memory that is registered
in each PCI device.
Attributes in the group display the total amount of P2P memory, the amount
available and whether it is published or not.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Separate registration out of of_sama5d4_clk_h32mx_setup to allow other code
to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As the SSCs don't have gclk, don't check for their ID to allow them to set
the audio pll rate.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
A typo that makes it impossible to get the correct clocks for
MMP2_CLK_SDH2 and MMP2_CLK_SDH3.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Extended atomic operations cmp&swp and fetch&add is a Mellanox
feature extending the standard atomic operation to use, varied
operand sizes, as apposed to normal atomic operation that use
an 8 byte operand only.
Extended atomics allows masking the results and arguments.
This patch configures QP to support extended atomic operation
with the maximum size possible, as exposed by HCA capabilities.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When add_port() is done for port == 0, it indicates that ports hardware
counters initialization should be skipped. Reflect so in the comment.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
ib_register_device() does several allocation and initialization
steps. Split it into smaller more readable functions for easy
review and maintenance.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
If port pkey list initialization fails, free the port_immutable memory
during cleanup path. Currently it is missed out.
If cache setup fails, free the pkey list during cleanup path.
Fixes: d291f1a65 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The WARN_ON() is pointless as the rport is placed in SDEV_TRANSPORT_OFFLINE
at that time, so no new commands can be submitted via srp_queuecommand()
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
i.MX7D uses virtual cpu clock of "arm" clock to be child clock
of "arm_a7_root_clk" and it is with CLK_IS_CRITICAL flag set, so
no need to add CLK_IS_CRITICAL flag for keeping "arm_a7_root_clk"
use count correct, latest clock tree is as below in clk_summary:
pll_arm_main 1 1 0 792000000 0
pll_arm_main_bypass 1 1 0 792000000 0
pll_arm_main_clk 1 1 0 792000000 0
arm_a7_src 1 1 0 792000000 0
arm_a7_cg 1 1 0 792000000 0
arm_a7_div 1 1 0 792000000 0
arm_a7_root_clk 1 1 0 792000000 0
arm 1 1 0 792000000
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add CLK_IS_CRITICAL flag for cpu clock type to
make cpu clock use count correct, as cpu clock
should be always critical.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Requester scatter to CQE is restricted to QPs configured to signal
all WRs.
This patch adds ability to enable scatter to cqe (force enable)
in the requester without sig_all, for users who do not want all WRs
signaled but rather just the ones whose data found in the CQE.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Flags sent down from user might not be supported by
running driver.
This might lead to unwanted bugs.
To solve this, added macro to test for unsupported flags.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Scatter to CQE is a HW offload that saves PCI writes by scattering the
payload to the CQE.
This patch extends already existing functionality to support DC
transport type.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the necessary code to patch a running kernel at runtime
to improve performance.
The current implementation offers a few optimizations variants:
- When running a SMP kernel on a single UP processor, unwanted assembler
statements like locking functions are overwritten with NOPs. When
multiple instructions shall be skipped, one branch instruction is used
instead of multiple nop instructions.
- In the UP case, some pdtlb and pitlb instructions are patched to
become pdtlb,l and pitlb,l which only flushes the CPU-local tlb
entries instead of broadcasting the flush to other CPUs in the system
and thus may improve performance.
- fic and fdc instructions are skipped if no I- or D-caches are
installed. This should speed up qemu emulation and cacheless systems.
- If no cache coherence is needed for IO operations, the relevant fdc
and sync instructions in the sba and ccio drivers are replaced by
nops.
- On systems which share I- and D-TLBs and thus don't have a seperate
instruction TLB, the pitlb instruction is replaced by a nop.
Live-patching is done early in the boot process, just after having run
the system inventory. No drivers are running and thus no external
interrupts should arrive. So the hope is that no TLB exceptions will
occur during the patching. If this turns out to be wrong we will
probably need to do the patching in real-mode.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Implement remove() callback function for the Mediatek PCIe controller
driver to add loadable kernel module support.
Save the PCIe's GIC IRQ at probe so that it can be retrieved to
call dispose_irq() to tear down the IRQ upon module removal.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
In order to reduce the PCIe power consumption in system suspend,
the PCI bus physical layer should be gated. On system resume, the PCIe
link should be re-established and the related control register values
should be restored.
Define suspend_noirq & resume_noirq callback functions to implement
PM system syspend hooks for the PCI host controller.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
Commit 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and
MT7622") added MSI support but enabled MSI in the wrong place, at a step
in the probe sequence where clocks were not still enabled.
Fix this issue by calling mtk_pcie_enable_msi() in mtk_pcie_startup_port_v2()
since clocks are enabled when mtk_pcie_startup_port_v2() is called.
To avoid forward declaration of mtk_pcie_enable_msi(), move the
mtk_pcie_startup_port_v2() function definition in the file.
Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: squashed commit and adapted log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
