summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-06-02sparc32,leon: added LEON-common low-level PCI routinesDaniel Hellstrom
The LEON architecture does not have a BIOS or bootloader that initializes PCI for us, instead Linux generic PCI layer is used to set up resources and IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-02[SCSI] Fix oops caused by queue refcounting failureJames Bottomley
In certain circumstances, we can get an oops from a torn down device. Most notably this is from CD roms trying to call scsi_ioctl. The root cause of the problem is the fact that after scsi_remove_device() has been called, the queue is fully torn down. This is actually wrong since the queue can be used until the sdev release function is called. Therefore, we add an extra reference to the queue which is released in sdev->release, so the queue always exists. Reported-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-06-02video: Convert vmalloc/memset to vzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Disallow manual bind and unbindAndy Lutomirski
Both were buggy: bind would happily scribble over a real graphics device and unbind wouldn't destroy the framebuffer. Hotplugging efifb makes no sense anyway, so just disable it. As an added benefit, we save some runtime memory. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Fix mismatched request/release_mem_regionAndy Lutomirski
Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Enable write-combiningAndy Lutomirski
Running fbcon on an uncached framebuffer is remarkably slow. So try to enable write combining in efifb. Without this patch, it takes 5.8 seconds from efifb probe to i915 probe (default options; no plymouth or quiet mode). With this patch, it only takes 1.7 seconds. That means we wasted over 4 seconds just writing to UC memory. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02drivers/video/pxa168fb.c: add missing clk_putJulia Lawall
Add a label for error-handling code in the case where only clk_get has succeeded. Rename the label failed to be consistent with the rest. A simplified version of the semantic match that finds the missing clk_put is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02drivers/video/imxfb.c: add missing clk_putJulia Lawall
Reorder the labels at the end of the function to correspond to the order in which the resources are allocated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02fbdev: bf537-lq035: add missing blacklight properties typeSteven Miao
Seems this new field was missed, probably due to this driver being merged around the time this new backlight field was being added. At any rate, initial the type field to avoid ugly WARN() dumps. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02savagefb: Use panel CVT mode as defaultTormod Volden
If there is no EDID but an LCD panel is detected, generate a CVT mode from the panel resolution (at 60 Hz), and use this as a default mode instead of the hardcoded 800x600x8 mode. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.Paul Mundt
The LCDC driver does no longer compile: CC drivers/video/sh_mobile_meram.o CC drivers/video/sh_mobile_lcdcfb.o drivers/video/sh_mobile_lcdcfb.c: In function 'sh_mobile_lcdc_start': drivers/video/sh_mobile_lcdcfb.c:640:4: error: 'ret' undeclared (first use in this function) drivers/video/sh_mobile_lcdcfb.c:640:4: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [drivers/video/sh_mobile_lcdcfb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02drivers/net/can/flexcan.c: add missing clk_putJulia Lawall
The failed_get label is used after the call to clk_get has succeeded, so it should be moved up above the call to clk_put. The failed_req labels doesn't do anything different than failed_get, so delete it. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-02dmaengine: shdma: fix a regression: initialise DMA channels for memcpyGuennadi Liakhovetski
A recent patch has introduced a regression, where repeating a memcpy DMA test with shdma module unloading between them skips the DMA channel configuration. Fix this regression by always configuring the channel during its allocation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-01net: dm9000: Get the chip in a known good state before enabling interruptsMark Brown
Currently the DM9000 driver requests the primary interrupt before it resets the chip and puts it into a known good state. This means that if the chip is asserting interrupt for some reason we can end up with a screaming IRQ that the interrupt handler is unable to deal with. Avoid this by only requesting the interrupt after we've reset the chip so we know what state it's in. This started manifesting itself on one of my boards in the past month or so, I suspect as a result of some core infrastructure changes removing some form of mitigation against bad behaviour here, even when things boot it seems that the new code brings the interface up more quickly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01drivers/net/davinci_emac.c: add missing clk_putJulia Lawall
Go to existing error handling code at the end of the function that calls clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01usbnet/cdc_ncm: add missing .reset_resume hookStefan Metzmacher
This avoids messages like this after suspend: cdc_ncm 2-1.4:1.6: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.7: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM This is important for the Ericsson F5521gw GSM/UMTS modem. Otherwise modemmanager looses the fact that the cdc_ncm and cdc_acm devices belong together. The cdc_ether module does the same. Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01hwmon: (coretemp) Further relax temperature range checksGuenter Roeck
Further relax temperature range checks after reading the IA32_TEMPERATURE_TARGET register. If the register returns a value other than 0 in bits 16..32, assume that the returned value is correct. This change applies to both packet and core temperature limits. Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2011-06-01hwmon: (coretemp) Fix TjMax detection for older CPUsGuenter Roeck
Commit a321cedb12904114e2ba5041a3673ca24deb09c9 excludes CPU models 0xe, 0xf, 0x16, and 0x1a from TjMax temperature adjustment, even though several of those CPUs are known to have TiMax other than 100 degrees C, and even though the code in adjust_tjmax() explicitly handles those CPUs and points to a Web document listing several of the affected CPU IDs. Reinstate original TjMax adjustment if TjMax can not be determined using the IA32_TEMPERATURE_TARGET register. https://bugzilla.kernel.org/show_bug.cgi?id=32582 Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@kernel.org> # .35.x .36.x .37.x .38.x .39.x
2011-06-01rtc: Staticize non-exported __rtc_set_alarm()Mark Brown
It's not referenced outside this file so there's no need for it to be in the global namespace and sparse warns about that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-01rtc: Fix ioctl error path returnJohn Stultz
Bryan Henderson noticed that the "RTC: Fix rtc driver ioctl specific shortcutting" commit has a small bug: When an ioctl is called with an invalid command code and the clock driver does not have an "ioctl" method, the ioctl returns rc 0 instead of -ENOTTY. This patch fixes the issue. CC: Bryan Henderson <bryanh@giraffe-data.com> CC: Gabor Z. Papp <gzp@papp.hu> Reported-by: Bryan Henderson <bryanh@giraffe-data.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-01ptp: Fix some locking bugs in ptp_read()Dan Carpenter
In ptp_read there is an unlock missing on an error path, and a double unlock on another error path. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-01ptp: Return -EFAULT on copy_to_user() errorsDan Carpenter
copy_to_user() returns the number of bytes remaining, but we want a negative error code in ptp_ioctl. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-02drm/radeon/kms: add missing Evergreen texture formats to the CS parserMarek Olšák
BC6 and BC7 are described in ARB_texture_compression_bptc. No idea what FMT_32_AS_32_32_32_32 is good for. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: viewport height has to be evenAlex Deucher
Otherwise, no vblank interrupts. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37522 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: remove duplicate reg from r600 safe regsAlex Deucher
It got added twice by accident. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: add support for Llano Fusion APUsAlex Deucher
- add gpu init support - add blit support - add ucode loader Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: fill in asic struct for llanoAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon/kms: add family ids for llano APUsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-02drm/radeon: fix oops in ttm reserve when pageflipping (v2)Dave Airlie
We need to take a reference to this object, pinning doesn't take a reference so if userspace deletes the object it can disappear even if pinned. v2: fix error paths to unreference properly also. should fix: https://bugzilla.kernel.org/show_bug.cgi?id=32402 and https://bugzilla.redhat.com/show_bug.cgi?id=680651 Acked-By: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-01xhci: Bigendian fix for skip_isoc_td()Matt Evans
Commit 926008c9386dde09b015753b6681c502177baa30 "USB: xhci: simplify logic of skipping missed isoc TDs" added a small endian bug. This patch fixes skip_isoc_td() to read the DMA pointer correctly. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-06-02Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Fix off-by-one in RMRR setup intel-iommu: Add domain check in domain_remove_one_dev_info intel-iommu: Remove Host Bridge devices from identity mapping intel-iommu: Use coherent DMA mask when requested intel-iommu: Dont cache iova above 32bit intel-iommu: Speed up processing of the identity_mapping function intel-iommu: Check for identity mapping candidate using system dma mask intel-iommu: Only unlink device domains from iommu intel-iommu: Enable super page (2MiB, 1GiB, etc.) support intel-iommu: Flush unmaps at domain_exit intel-iommu: Remove obsolete comment from detect_intel_iommu intel-iommu: fix VT-d PMR disable for TXT on S3 resume
2011-06-02block: fix mismerge of the DISK_EVENT_MEDIA_CHANGE removalLinus Torvalds
Jens' back-merge commit 698567f3fa79 ("Merge commit 'v2.6.39' into for-2.6.40/core") was incorrectly done, and re-introduced the DISK_EVENT_MEDIA_CHANGE lines that had been removed earlier in commits - 9fd097b14918 ("block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers") - 7eec77a1816a ("ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd") because of conflicts with the "g->flags" updates near-by by commit d4dc210f69bc ("block: don't block events on excl write for non-optical devices") As a result, we re-introduced the hanging behavior due to infinite disk media change reports. Tssk, tssk, people! Don't do back-merges at all, and *definitely* don't do them to hide merge conflicts from me - especially as I'm likely better at merging them than you are, since I do so many merges. Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-01PCI: fix new kernel-doc warningRandy Dunlap
Fix pci.c kernel-doc warnings: Warning(drivers/pci/pci.c:3292): No description found for parameter 'flags' Warning(drivers/pci/pci.c:3292): Excess function parameter 'change_bridge_flags' description in 'pci_set_vga_state' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-01iwl4965: correctly validate temperature valueStanislaw Gruszka
In some cases we can read wrong temperature value. If after that temperature value will not be updated to good one, we badly configure tx power parameters and device is unable to send a data. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=35932 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k: fix two more bugs in tx powerDaniel Halperin
This is the same fix as commit 841051602e3fa18ea468fe5a177aa92b6eb44b56 Author: Matteo Croce <technoboy85@gmail.com> Date: Fri Dec 3 02:25:08 2010 +0100 The ath9k driver subtracts 3 dBm to the txpower as with two radios the signal power is doubled. The resulting value is assigned in an u16 which overflows and makes the card work at full power. in two more places. I grepped the ath tree and didn't find any others. Cc: stable@kernel.org Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01hwmon: (coretemp) Relax target temperature range checkJean Delvare
The current temperature range check of MSR_IA32_TEMPERATURE_TARGET seems too strict to me, some TjMax values documented in Documentation/hwmon/coretemp wouldn't pass. Relax the check so that all the documented values pass. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_faultPer Dalen
The temp_fault sysfs attribute is wrong, it should be temp2_fault instead. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Per Dalen <per.dalen@appeartv.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01[media] soc_camera: preserve const attributeMauro Carvalho Chehab
drivers/media/video/soc_camera.c: In function ‘soc_camera_video_start’: drivers/media/video/soc_camera.c:1515: warning: initialization discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01[media] uvc_entity: initialize return valueMauro Carvalho Chehab
drivers/media/video/uvc/uvc_entity.c: In function ‘uvc_mc_register_entities’: drivers/media/video/uvc/uvc_entity.c:33: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01[media] media: Fix media device minor registrationLaurent Pinchart
The find_next_zero_bit() is called with the from and to arguments in the wrong order. This results in the function always returning 0, and all media devices being registered with minor 0. Furthermore, mdev->minor is then used before being assigned with the find_next_zero_bit() return value. This really makes sure we'll always use minor 0. Fix this and let the system support more than one media device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01[media] Make nchg variable signed because the code compares this variable ↵Hans Petter Selasky
against negative values The sonixj driver compares the value for nchg with: if (sd->nchg < -6 || sd->nchg >= 12) { With u8, negative values won't work. Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01xen/blkback: potential null dereference in error handlingDan Carpenter
blkbk->pending_pages can be NULL here so I added a check for it. Signed-off-by: Dan Carpenter <error27@gmail.com> [v1: Redid the loop a bit] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-01xen/blkback: don't call vbd_size() if bd_disk is NULLLaszlo Ersek
...because vbd_size() dereferences bd_disk if bd_part is NULL. Signed-off-by: Laszlo Ersek<lersek@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-01[media] omap3isp: fix compiler warningSanjeev Premi
This patch fixes this compiler warning: drivers/media/video/omap3isp/isp.c: In function 'isp_isr_dbg': drivers/media/video/omap3isp/isp.c:392:2: warning: zero-length gnu_printf format string Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01intel-iommu: Fix off-by-one in RMRR setupDavid Woodhouse
We were mapping an extra byte (and hence usually an extra page): iommu_prepare_identity_map() expects to be given an 'end' argument which is the last byte to be mapped; not the first byte *not* to be mapped. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-06-01intel-iommu: Add domain check in domain_remove_one_dev_infoMike Habeck
The comment in domain_remove_one_dev_info() states "No need to compare PCI domain; it has to be the same". But for the si_domain that isn't going to be true, as it consists of all the PCI devices that are identity mapped thus multiple PCI domains can be in si_domain. The code needs to validate the PCI domain too. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-06-01intel-iommu: Remove Host Bridge devices from identity mappingMike Travis
When using the 1:1 (identity) PCI DMA remapping, PCI Host Bridge devices that do not use the IOMMU causes a kernel panic. Fix that by not inserting those devices into the si_domain. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-06-01intel-iommu: Use coherent DMA mask when requestedMike Travis
The __intel_map_single function is not honoring the passed in DMA mask. This results in not using the coherent DMA mask when called from intel_alloc_coherent(). Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-06-01intel-iommu: Dont cache iova above 32bitChris Wright
Mike Travis and Mike Habeck reported an issue where iova allocation would return a range that was larger than a device's dma mask. https://lkml.org/lkml/2011/3/29/423 The dmar initialization code will reserve all PCI MMIO regions and copy those reservations into a domain specific iova tree. It is possible for one of those regions to be above the dma mask of a device. It is typical to allocate iovas with a 32bit mask (despite device's dma mask possibly being larger) and cache the result until it exhausts the lower 32bit address space. Freeing the iova range that is >= the last iova in the lower 32bit range when there is still an iova above the 32bit range will corrupt the cached iova by pointing it to a region that is above 32bit. If that region is also larger than the device's dma mask, a subsequent allocation will return an unusable iova and cause dma failure. Simply don't cache an iova that is above the 32bit caching boundary. Reported-by: Mike Travis <travis@sgi.com> Reported-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Acked-by: Mike Travis <travis@sgi.com> Tested-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-06-01intel-iommu: Speed up processing of the identity_mapping functionMike Travis
When there are a large count of PCI devices, and the pass through option for iommu is set, much time is spent in the identity_mapping function hunting though the iommu domains to check if a specific device is "identity mapped". Speed up the function by checking the cached info to see if it's mapped to the static identity domain. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit (git 2.34.1) at 2025-09-17 00:48:54 +0000