Age | Commit message (Collapse) | Author |
|
The "intel,nand-controller" compatible string is not part of the
dt-bindings. Remove it from the driver as it's not supposed to be used
without any documentation for it.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-5-martin.blumenstingl@googlemail.com
|
|
The chip select has to be read from the flash node which is a child node
of the NAND controller.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-4-martin.blumenstingl@googlemail.com
|
|
Implement a minimal EFI app that decompresses the real kernel image and
launches it using the firmware's LoadImage and StartImage boot services.
This removes the need for any arch-specific hacks.
Note that on systems that have UEFI secure boot policies enabled,
LoadImage/StartImage require images to be signed, or their hashes known
a priori, in order to be permitted to boot.
There are various possible strategies to work around this requirement,
but they all rely either on overriding internal PI/DXE protocols (which
are not part of the EFI spec) or omitting the firmware provided
LoadImage() and StartImage() boot services, which is also undesirable,
given that they encapsulate platform specific policies related to secure
boot and measured boot, but also related to memory permissions (whether
or not and which types of heap allocations have both write and execute
permissions.)
The only generic and truly portable way around this is to simply sign
both the inner and the outer image with the same key/cert pair, so this
is what is implemented here.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Drop the "sio" infix from the few remaining definitions and symbol names
that still had it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Move the definition of the USB serial driver structure to the end of the
file where it is used and drop the now redundant forward declarations.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Clean up the attribute visibility logic by defaulting to attributes
being visible and explicitly listing the exceptions.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Provide DRM_PLANE_NON_ATOMIC_FUNCS, which initializes plane functions
of non-atomic drivers to default values. The macro is not supposed to
be used in new code, but helps with documenting and finding existing
users.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-5-tzimmermann@suse.de
|
|
The plane update and disable helpers are only useful for non-atomic
drivers. Print a warning if an atomic driver calls them.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-4-tzimmermann@suse.de
|
|
Provide drm_univeral_plane_alloc() to allocate and initialize a
plane. Code for non-atomic drivers uses this pattern. Convert them to
the new function. The modeset helpers contain a quirk for handling their
color formats differently. Set the flag outside plane allocation.
The new function is already deprecated to some extend. Drivers should
rather use drmm_univeral_plane_alloc() or drm_universal_plane_init().
v2:
* kerneldoc fixes (Javier)
* grammar fixes in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-3-tzimmermann@suse.de
|
|
Open-code drm_plane_init() and remove the function from DRM. The
implementation of drm_plane_init() is a simple wrapper around a call
to drm_universal_plane_init(), so drivers can just use that instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-2-tzimmermann@suse.de
|
|
drivers/gpu/drm/drm_atomic_helper.c:802: warning: expecting prototype for drm_atomic_helper_check_wb_connector_state(). Prototype was for drm_atomic_helper_check_wb_encoder_state() instead.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2216
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919103058.25561-1-jiapeng.chong@linux.alibaba.com
|
|
G200ER does not seem to support 24 bpp, so force the console to
use 32 bpp. The problem got introduced when commit 73f54d5d9682
("drm/mgag200: Remove special case for G200SE with <2 MiB") changed
the preferred color depth from 32 bit to 24 bit.
A setting of 24 is the correct color depth, but G200ER doesn't seem
to be able to use the respective RGB888 color format. Using 24-bit
color with forced 32 bpp works around the problem.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 73f54d5d9682 ("drm/mgag200: Remove special case for G200SE with <2 MiB")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220915150348.31504-1-tzimmermann@suse.de
|
|
Add support for offloading packets based on L2TPv3 session id in switchdev
mode.
Example filter:
tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \
l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to be able to specify l2tpv3_sid.
ICE COMMS DDP package is required to create a filter as it contains L2TPv3
profiles.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no cyclic dependency between gpio_twl4030_probe() and
gpio_twl4030_remove(), so by moving the latter before the former the
forward declaration can be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When multiple serdes instances are initialized the first will succeed but
additional will conflict over clocks names and probing fails.
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220909200026.3422-1-mranostay@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()")
introduced an array of quirk functions which get iterated over. But a
sentinal value is missing. Add it.
Fixes: a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The PHY type is not set if the index is non zero, prepare type
value according to the index, like as mask value.
Fixes: 39099a443358 ("phy: phy-mtk-tphy: support type switch by pericfg")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-7-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
No need repeat to clear utmi 0 register in ->power_on() and
->power_off(), just do it in ->init()
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-6-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Disable DP/DM's GPIO mode for all usb2 phy, not only for the first
usb2 phy which usually supports dual-role mode.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-5-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
INTR's value is able autoload from hardware efuse by default, when
software tries to update its value, should disable hardware efuse
firstly.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220914060746.10004-4-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a property to set usb2 phy's pre-emphasis, it's disabled by default
on some SoCs.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-3-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220914133728.3781160-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
of_get_parent()
As the of_get_parent() will increase the refcount of the node->parent
and the reference will be discarded, so we should hold the reference
with which we can decrease the refcount when done.
Fixes: 8eff8b4e22d9 ("phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220915093506.4009456-1-windhl@126.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PCS_USB register block lives at an offset of 0x300 from the PCS
region on SC8280XP so add the missing offset to avoid corrupting
unrelated registers on runtime suspend.
Note that this region should probably be described separately in the
binding.
Fixes: a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220919095700.2228-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for the Rockchip RK3568 DSI-DPHY. Registers were taken from
the BSP kernel driver and wherever possible cross referenced with the
TRM.
Refactor the code to allow the different compatible strings to set
either a max 1GHz timing table (all existing hardware) or a max 2.5GHz
timing table (the new RK356x). This works (for me) on both an RK3326
(PX30) and a new RK3566 device.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220919164616.12492-3-macroalpha82@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.
At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy" and they had
been added to the binding less than six months before the binding was
fixed.
Presumably no one is using four-year old SDM845 dtbs with mainline
anymore so drop the workaround for malformed devicetrees. In the
unlikely event that anyone complains, we can consider reverting.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.
At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy" and they had
been added to the binding less than six months before the binding was
fixed.
Presumably no one is using four-year old SDM845 dtbs with mainline
anymore so drop the workaround for malformed devicetrees. In the
unlikely event that anyone complains, we can consider reverting.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-11-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.
At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy", neither
of which is a combo PHY.
Drop the workaround for malformed devicetrees, which should no longer be
needed since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.
At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy", neither
of which is a PCIe PHY.
Drop the workaround for malformed devicetrees, which should no longer be
needed since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The MSM8996 QMP PHY driver does not use the PCS_MISC IO region (and
neither do the DT binding specify it) so remove the corresponding code
from the driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-8-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.
Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.
Two bindings currently rely on overlapping mappings for the PCS region
so fallback to non-exclusive mappings for those for now.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.
Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.
Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.
Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.
Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure that the (otherwise) optional pcs_misc IO region has been
provided in case the configuration specifies a corresponding
initialisation table to avoid crashing with malformed device trees.
Note that the related debug message is now superfluous as the region is
only used when the configuration has a pcs_misc table.
Fixes: 421c9a0e9731 ("phy: qcom: qmp: Add SDM845 PCIe QMP PHY support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220916102340.11520-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver function prefix has gotten unnecessarily long and hurts
readability.
Shorten "qcom_qmp_phy_" to "qmp_" (which likely stands for "Qualcomm
Multi PHY" or similar anyway).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-17-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver function prefix has gotten unnecessarily long and hurts
readability.
Shorten "qcom_qmp_phy_" to "qmp_" (which likely stands for "Qualcomm
Multi PHY" or similar anyway).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-16-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver function prefix has gotten unnecessarily long and hurts
readability.
Shorten "qcom_qmp_phy_" to "qmp_" (which likely stands for "Qualcomm
Multi PHY" or similar anyway).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-15-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the secondary register initialisation tables which aren't used by
this driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver function prefix has gotten unnecessarily long and hurts
readability.
Shorten "qcom_qmp_phy_" to "qmp_" (which likely stands for "Qualcomm
Multi PHY" or similar anyway).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-13-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drivers should in general not log anything during unless there are
errors.
Drop the pointless registration info message from the QMP drivers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop defines and enums that are unused since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220907110728.19092-11-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to disable runtime PM also on driver unbind.
Fixes: ac0d239936bd ("phy: qcom-qmp: Add support for runtime PM").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop defines and enums that are unused since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220907110728.19092-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the unused and incomplete runtime PM implementation, which was
only used by USB PHYs before splitting the QMP driver.
Note that the runtime PM was never disabled (and state restored) on
driver unbind.
This effectively reverts commit ac0d239936bd ("phy: qcom-qmp: Add
support for runtime PM").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-8-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop defines and enums that are unused since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220907110728.19092-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the unused and incomplete runtime PM implementation, which was
only used by USB PHYs before splitting the QMP driver.
Note that the runtime PM was never disabled (and state restored) on
driver unbind.
This effectively reverts commit ac0d239936bd ("phy: qcom-qmp: Add
support for runtime PM").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop defines and enums that are unused since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the unused and incomplete runtime PM implementation, which was
only used by USB PHYs before splitting the QMP driver.
Note that the runtime PM was never disabled (and state restored) on
driver unbind.
This effectively reverts commit ac0d239936bd ("phy: qcom-qmp: Add
support for runtime PM").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220907110728.19092-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|