| Age | Commit message (Collapse) | Author |
|---|
|
io_eq_size and event_eq_size params are of param type
DEVLINK_PARAM_TYPE_U32. But, the validation callback is addressing them
as DEVLINK_PARAM_TYPE_U16.
This cause mismatch in validation in big-endian systems, in which
values in range were rejected while 268500991 was accepted.
Fix it by checking the U32 value in the validation callback.
Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are two cleanup calls missing in mlx5_init_once() error path.
Add them making the error path flow to be the same as
mlx5_cleanup_once().
Fixes: 52ec462eca9b ("net/mlx5: Add reserved-gids support")
Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already
present in the frame. Previous VST mode behavior was to drop packets or
override existing tag, depending on the device version.
In this patch we fix this behavior by correctly building the HW steering
rule with a push vlan action, or for older devices we ask the FW to stack
the vlan when a vlan is already present.
Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
VAC needs to be wired up to produce proper measurements,
without this change only near zero values are reported.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is in active mode, it fails to set an ACCEL full-scale
range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the
datasheet, but it is a fxos8700 chip behavior.
Keep the device in standby mode before setting ACCEL full-scale range
into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting
scale phase.
Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
14-bit left-justified sample data and MAGN output data registers
contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL
raw register output data should be divided by 4 before sent to
userspace.
Apply a 2 bits signed right shift to the raw data from ACCEL output
data register but keep that from MAGN sensor as the origin.
Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The length of ACCEL and MAGN 3-axis channels output data is 6 byte
individually. However block only read 3 bytes data into buffer from
ACCEL or MAGN output data registers every time. It causes an incomplete
ACCEL and MAGN channels readback.
Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and
MAGN channels readback.
Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Because ACCEL and MAGN channels data register base address is
swapped the accelerometer and magnetometer channels readback is
swapped.
Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor.
Sensor type is indexed by corresponding channel type in a switch.
IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion.
Fix the mapping label of "IIO_MAGN" channel type instead of
"IIO_ANGL_VEL" channel type to MAGN sensor.
Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some inputs need to be wired up to produce proper measurements,
without this change only near zero values are reported.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
irq flood happen when run
cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw
imx8qxp_adc_read_raw()
{
...
enable irq
/* adc start */
writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG);
^^^^ trigger irq flood.
wait_for_completion_interruptible_timeout();
readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO);
^^^^ clear irq here.
...
}
There is only FIFO watermark interrupt at this ADC controller.
IRQ line will be assert until software read data from FIFO.
So IRQ flood happen during wait_for_completion_interruptible_timeout().
Move FIFO read into irq handle to avoid irq flood.
Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The clang-analyzer reported a warning: "Value stored to 'ret'
is never read".
Fix the return value check if devm_krealloc() fails to resize
ams_channels.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
of_get_parent() will return a device_node pointer with refcount
incremented. We need to use of_node_put() on it when done. Add the
missing of_node_put() in the error path of berlin2_adc_probe();
Fixes: 70f1937911ca ("iio: adc: add support for Berlin")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When STM32 DFSDM driver is built as module, no modalias information
is available. This prevents module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fill module aliases.
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr
ffdd4000 [fault reason 05] PTE Write access is not set
In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PSIL_EP_NATIVE endpoints may not have PEER registers for BCNT and thus
udma_decrement_byte_counters() should not try to decrement these counters.
This fixes the issue of crypto IPERF testing where the client side (EVM)
hangs without transfer of packets to the server side, seen since this
function was added.
Fixes: 7c94dcfa8fcf ("dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221128085005.489964-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On driver unload any pending descriptors are flushed and pending
DMA descriptors are explicitly completed:
idxd_dmaengine_drv_remove() ->
drv_disable_wq() ->
idxd_wq_free_irq() ->
idxd_flush_pending_descs() ->
idxd_dma_complete_txd()
With this done during driver unload any remaining descriptor is
likely stuck and can be dropped. Even so, the descriptor may still
have a callback set that could no longer be accessible. An
example of such a problem is when the dmatest fails and the dmatest
module is unloaded. The failure of dmatest leaves descriptors with
dma_async_tx_descriptor::callback pointing to code that no longer
exist. This causes a page fault as below at the time the IDXD driver
is unloaded when it attempts to run the callback:
BUG: unable to handle page fault for address: ffffffffc0665190
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
Fix this by clearing the callback pointers on the transmit
descriptors only when workqueue is disabled.
Fixes: 403a2e236538 ("dmaengine: idxd: change MSIX allocation based on per wq activation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/37d06b772aa7f8863ca50f90930ea2fd80b38fc3.1670452419.git.reinette.chatre@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On driver unload any pending descriptors are flushed at the
time the interrupt is freed:
idxd_dmaengine_drv_remove() ->
drv_disable_wq() ->
idxd_wq_free_irq() ->
idxd_flush_pending_descs().
If there are any descriptors present that need to be flushed this
flow triggers a "not present" page fault as below:
BUG: unable to handle page fault for address: ff391c97c70c9040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
The address that triggers the fault is the address of the
descriptor that was freed moments earlier via:
drv_disable_wq()->idxd_wq_free_resources()
Fix the use after free by freeing the descriptors after any possible
usage. This is done after idxd_wq_reset() to ensure that the memory
remains accessible during possible completion writes by the device.
Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations")
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6c4657d9cff0a0a00501a7b928297ac966e9ec9d.1670452419.git.reinette.chatre@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The workqueue is enabled when the appropriate driver is loaded and
disabled when the driver is removed. When the driver is removed it
assumes that the workqueue was enabled successfully and proceeds to
free allocations made during workqueue enabling.
Failure during workqueue enabling does not prevent the driver from
being loaded. This is because the error path within drv_enable_wq()
returns success unless a second failure is encountered
during the error path. By returning success it is possible to load
the driver even if the workqueue cannot be enabled and
allocations that do not exist are attempted to be freed during
driver remove.
Some examples of problematic flows:
(a)
idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq():
In above flow, if idxd_wq_request_irq() fails then
idxd_wq_unmap_portal() is called on error exit path, but
drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The
driver is thus loaded successfully.
idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal()
Above flow on driver unload triggers the WARN in devm_iounmap() because
the device resource has already been removed during error path of
drv_enable_wq().
(b)
idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq():
In above flow, if idxd_wq_request_irq() fails then
idxd_wq_init_percpu_ref() is never called to initialize the percpu
counter, yet the driver loads successfully because drv_enable_wq()
returns 0.
idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill():
Above flow on driver unload triggers a BUG when attempting to drop the
initial ref of the uninitialized percpu ref:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Fix the drv_enable_wq() error path by returning the original error that
indicates failure of workqueue enabling. This ensures that the probe
fails when an error is encountered and the driver remove paths are only
attempted when the workqueue was enabled successfully.
Fixes: 1f2bb40337f0 ("dmaengine: idxd: move wq_enable() to device.c")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/e8d8116e5efa0fd14fadc5adae6ffd319f0e5ff1.1670452419.git.reinette.chatre@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.
Cc: stable@vger.kernel.org
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
In the receive_filter(), should not drop the packet with the
broadcast/multicast address. Add the check for this
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221214054306.24145-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
After commit bda324fd037a ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps.
Fixes: bda324fd037a ("vdpasim: control virtqueue support")
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221213090717.61529-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
|
|
For the device without multiqueue feature, we will read 0 as
max_virtqueue_pairs from the config. So if we fill
VDPA_ATTR_DEV_NET_CFG_MAX_VQP with the value we read from the config
we will confuse the user.
Fixing this by only filling the value when multiqueue is offered by
the device so userspace can assume 1 when the attr is not provided.
Fixes: 13b00b135665c("vdpa: Add support for querying vendor statistics")
Cc: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220907060110.4511-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
|
|
In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses
a reference of pointer as the argument of kfree, which is the wrong pointer
and then may hit crash like this:
Unable to handle kernel paging request at virtual address 00ffff003363e30c
Internal error: Oops: 96000004 [#1] SMP
Call trace:
rb_next+0x20/0x5c
ext4_readdir+0x494/0x5c4 [ext4]
iterate_dir+0x168/0x1b4
__se_sys_getdents64+0x68/0x170
__arm64_sys_getdents64+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821)
SMP: stopping secondary CPUs
Starting crashdump kernel...
Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Signed-off-by: Rong Wang <wangrong68@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Message-Id: <20221207120813.2837529-1-sunnanyong@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cindy Lu <lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.
Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.
This is found using static analysis with smatch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
While testing in vIOMMU, sometimes Guest will unmap very large memory,
which will cause the crash. To fix this, add a new function
vhost_vdpa_general_unmap(). This function will only unmap the memory
that saved in iotlb.
Call Trace:
[ 647.820144] ------------[ cut here ]------------
[ 647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174!
[ 647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62
[ 647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4
[ 647.824365] RIP: 0010:domain_unmap+0x48/0x110
[ 647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59
[ 647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202
[ 647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b
[ 647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540
[ 647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003
[ 647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff
[ 647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000
[ 647.834782] FS: 00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000
[ 647.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0
[ 647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 647.840666] Call Trace:
[ 647.841437] <TASK>
[ 647.842107] intel_iommu_unmap_pages+0x93/0x140
[ 647.843112] __iommu_unmap+0x91/0x1b0
[ 647.844003] iommu_unmap+0x6a/0x95
[ 647.844885] vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa]
[ 647.845985] vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa]
[ 647.847235] ? _raw_spin_unlock+0x15/0x30
[ 647.848181] ? _copy_from_iter+0x8c/0x580
[ 647.849137] vhost_chr_write_iter+0xb3/0x430 [vhost]
[ 647.850126] vfs_write+0x1e4/0x3a0
[ 647.850897] ksys_write+0x53/0xd0
[ 647.851688] do_syscall_64+0x3a/0x90
[ 647.852508] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 647.853457] RIP: 0033:0x7f7734ef9f4f
[ 647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8
[ 647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f
[ 647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010
[ 647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000
[ 647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010
[ 647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000
[ 647.864692] </TASK>
[ 647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v]
[ 647.874688] ---[ end trace 0000000000000000 ]---
Cc: stable@vger.kernel.org
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221219073331.556140-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Replace sprintf with sysfs_emit or its variants for their
built-in PAGE_SIZE awareness.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Message-Id: <TYCP286MB23232A999FE7DBDF50BA0FAACA0F9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(),
and should be freed in the invalid ctrl_status->status error handling
case. Otherwise there is a memory leak.
Fixes: 0756ad15b1fe ("virtio-crypto: use private buffer for control request")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: zhenwei pi<pizhenwei@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When we initialize vringh, we should pass the features and the
number of elements in the virtqueue negotiated with the driver,
otherwise operations with vringh may fail.
This was discovered in a case where the driver sets a number of
elements in the virtqueue different from the value returned by
.get_vq_num_max().
In vdpasim_vq_reset() is safe to initialize the vringh with
default values, since the virtqueue will not be used until
vdpasim_queue_ready() is called again.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110141335.62171-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
We use UINT_MAX to limit max_discard_sectors in virtblk_probe,
we can use UINT_MAX to limit max_hw_sectors for consistencies.
No functional change intended.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221110030124.1986-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
we called vhost_vdpa_iotlb_unmap(v, iotlb, 0ULL, 0ULL - 1) during
release to free all the resources allocated when processing user IOTLB
messages through vhost_vdpa_process_iotlb_update().
That commit changed the handling of IOTLB a bit, and we accidentally
removed some code called during the release.
We partially fixed this with commit 037d4305569a ("vhost-vdpa: call
vhost_vdpa_cleanup during the release") but a potential memory leak is
still there as showed by kmemleak if the application does not send
VHOST_IOTLB_INVALIDATE or crashes:
unreferenced object 0xffff888007fbaa30 (size 16):
comm "blkio-bench", pid 914, jiffies 4294993521 (age 885.500s)
hex dump (first 16 bytes):
40 73 41 07 80 88 ff ff 00 00 00 00 00 00 00 00 @sA.............
backtrace:
[<0000000087736d2a>] kmem_cache_alloc_trace+0x142/0x1c0
[<0000000060740f50>] vhost_vdpa_process_iotlb_msg+0x68c/0x901 [vhost_vdpa]
[<0000000083e8e205>] vhost_chr_write_iter+0xc0/0x4a0 [vhost]
[<000000008f2f414a>] vhost_vdpa_chr_write_iter+0x18/0x20 [vhost_vdpa]
[<00000000de1cd4a0>] vfs_write+0x216/0x4b0
[<00000000a2850200>] ksys_write+0x71/0xf0
[<00000000de8e720b>] __x64_sys_write+0x19/0x20
[<0000000018b12cbb>] do_syscall_64+0x3f/0x90
[<00000000986ec465>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Let's fix this calling vhost_vdpa_iotlb_unmap() on the whole range in
vhost_vdpa_remove_as(). We move that call before vhost_dev_cleanup()
since we need a valid v->vdev.mm in vhost_vdpa_pa_unmap().
vhost_iotlb_reset() call can be removed, since vhost_vdpa_iotlb_unmap()
on the whole range removes all the entries.
The kmemleak log reported was observed with a vDPA device that has `use_va`
set to true (e.g. VDUSE). This patch has been tested with both types of
devices.
Fixes: 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109154213.146789-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.
In translate_desc() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.
Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.
Fixes: a9709d6874d5 ("vhost: convert pre sorted vhost memory array to interval tree")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.
In iotlb_translate() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.
Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.
Fixes: 9ad9c49cfe97 ("vringh: IOTLB support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A problem about modprobe vhost_vsock failed is triggered with the
following log given:
modprobe: ERROR: could not insert 'vhost_vsock': Device or resource busy
The reason is that vhost_vsock_init() returns misc_register() directly
without checking its return value, if misc_register() failed, it returns
without calling vsock_core_unregister() on vhost_transport, resulting the
vhost_vsock can never be installed later.
A simple call graph is shown as below:
vhost_vsock_init()
vsock_core_register() # register vhost_transport
misc_register()
device_create_with_groups()
device_create_groups_vargs()
dev = kzalloc(...) # OOM happened
# return without unregister vhost_transport
Fix by calling vsock_core_unregister() when misc_register() returns error.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20221108101705.45981-1-yuancan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Inject fault while probing module, if device_register() fails in
vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is
not decreased to 0, the name allocated in dev_set_name() is leaked.
Fix this by calling put_device(), so that name can be freed in
callback function kobject_cleanup().
(vdpa_sim_net)
unreferenced object 0xffff88807eebc370 (size 16):
comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s)
hex dump (first 16 bytes):
76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5 vdpasim_net.kkk.
backtrace:
[<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150
[<ffffffff81731d53>] kstrdup+0x33/0x60
[<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110
[<ffffffff82d87aab>] dev_set_name+0xab/0xe0
[<ffffffff82d91a23>] device_add+0xe3/0x1a80
[<ffffffffa0270013>] 0xffffffffa0270013
[<ffffffff81001c27>] do_one_initcall+0x87/0x2e0
[<ffffffff813739cb>] do_init_module+0x1ab/0x640
[<ffffffff81379d20>] load_module+0x5d00/0x77f0
[<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0
[<ffffffff83c4d505>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
(vdpa_sim_blk)
unreferenced object 0xffff8881070c1250 (size 16):
comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s)
hex dump (first 16 bytes):
76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5 vdpasim_blk.kkk.
backtrace:
[<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150
[<ffffffff81731d53>] kstrdup+0x33/0x60
[<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110
[<ffffffff82d87aab>] dev_set_name+0xab/0xe0
[<ffffffff82d91a23>] device_add+0xe3/0x1a80
[<ffffffffa0220013>] 0xffffffffa0220013
[<ffffffff81001c27>] do_one_initcall+0x87/0x2e0
[<ffffffff813739cb>] do_init_module+0x1ab/0x640
[<ffffffff81379d20>] load_module+0x5d00/0x77f0
[<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0
[<ffffffff83c4d505>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 899c4d187f6a ("vdpa_sim_blk: add support for vdpa management tool")
Fixes: a3c06ae158dd ("vdpa_sim_net: Add support for user supported devices")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110082348.4105476-1-ruanjinjie@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Variable i is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20221024133756.2158497-1-colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-3-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-2-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
When qemu uses different address spaces for data and control virtqueues,
the current code would overwrite the control virtqueue iotlb through the
dup_iotlb call. Fix this by referring to the address space identifier
and the group to asid mapping to determine which mapping needs to be
updated. We also move the address space logic from mlx5 net to core
directory.
Reported-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
event_handler runs under atomic context and may not acquire reslock. We
can still guarantee that the handler won't be called after suspend by
clearing nb_registered, unregistering the handler and flushing the
workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Delete the old MAC from the table and not the new one which is not there
yet.
Fixes: baf2ad3f6a98 ("vdpa/mlx5: Add RX MAC VLAN filter support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
