summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-12-09HID: wacom: generic: Don't return a value for wacom_wac_eventPing Cheng
It is unnecessary to return a value since nothing is expecting a value from it. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-09USB: serial: option: add dlink dwm-158Giuseppe Lippolis
Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-09USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041Daniele Palmas
This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-09xen/scsifront: don't request a slot on the ring until request is readyJuergen Gross
Instead of requesting a new slot on the ring to the backend early, do so only after all has been setup for the request to be sent. This makes error handling easier as we don't need to undo the request id allocation and ring slot allocation. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-08md: separate flags for superblock changesShaohua Li
The mddev->flags are used for different purposes. There are a lot of places we check/change the flags without masking unrelated flags, we could check/change unrelated flags. These usage are most for superblock write, so spearate superblock related flags. This should make the code clearer and also fix real bugs. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08md: MD_RECOVERY_NEEDED is set for mddev->recoveryShaohua Li
Fixes: 90f5f7ad4f38("md: Wait for md_check_recovery before attempting device removal.") Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-08md: takeover should clear unrelated bitsShaohua Li
When we change level from raid1 to raid5, the MD_FAILFAST_SUPPORTED bit will be accidentally set, but raid5 doesn't support it. The same is true for the MD_HAS_JOURNAL bit. Fix: 46533ff (md: Use REQ_FAILFAST_* on metadata writes where appropriate) Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-09Merge tag 'drm-fsl-dcu-for-next' of ↵Dave Airlie
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next Some fixes and cleanup, mainly around fbdev emulation. It also adds a new module parameter which allows to specify the color depth/bpp for the fbdev emulation (like the IMX DRM driver). * tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: introduce kernel parameter to specify fbdev depth drm/fsl-dcu: remove separate compilation unit for fbdev emulation drm/fsl-dcu: Propagate the real error code drm/fsl-dcu: Remove unneeded NULL check drm/fsl-dcu: disable outputs before unloading driver drm/fsl-dcu: unload driver before disabling clocks
2016-12-08net: xgene: avoid bogus maybe-uninitialized warningArnd Bergmann
In some configurations, gcc cannot trace the state of variables across a spin_unlock() barrier, leading to a warning about correct code: xgene_enet_main.c: In function 'xgene_enet_start_xmit': ../../../phy/mdio-xgene.h:112:14: error: 'mss_index' may be used uninitialized in this function [-Werror=maybe-uninitialized] Here we can trivially move the assignment before that spin_unlock, which reliably avoids the warning. Fixes: e3978673f514 ("drivers: net: xgene: Fix MSS programming") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: xgene: move xgene_cle_ptree_ewdn data off stackArnd Bergmann
The array for initializing the cle is set up on the stack with almost entirely constant data and then passed to a function that converts it into HW specific bit patterns. With the latest addition, the size of this array has grown to the point that we get a warning about potential stack overflow in allmodconfig builds: xgene_enet_cle.c: In function ‘xgene_enet_cle_init’: xgene_enet_cle.c:836:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Looking a bit deeper at the usage, I noticed that the only modification of the data is in dead code, as we don't even use the cle module for phy_mode other than PHY_INTERFACE_MODE_XGMII. This means we can simply mark the structure constant and access it directly rather than passing the pointer down through another structure, making the code more efficient at the same time as avoiding the warning. Fixes: a809701fed15 ("drivers: net: xgene: fix: RSS for non-TCP/UDP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net/mlx5e: use %pad format string for dma_addr_tArnd Bergmann
On 32-bit ARM with 64-bit dma_addr_t I get this warning about an incorrect format string: In file included from /git/arm-soc/drivers/net/ethernet/mellanox/mlx5/core/alloc.c:42:0: drivers/net/ethernet/mellanox/mlx5/core/alloc.c: In function ‘mlx5_frag_buf_alloc_node’: drivers/net/ethernet/mellanox/mlx5/core/alloc.c:134:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] We have the special %pad format for printing dma_addr_t, so use that to print the correct address and avoid the warning. Fixes: 1c1b522808a1 ("net/mlx5e: Implement Fragmented Work Queue (WQ)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09Merge tag 'drm-misc-next-2016-12-08' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Another pile of misc stuff, final one for 4.10. If there's some serious bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with intel), otherwise this is it and next pull next year for 4.11. Most interesting bits are probably Chris' fb helper fixes against mst hotplug oopses. * tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits) drm: Take ownership of the dmabuf->obj when exporting drm: Allow CAP_PRIME on !MODESET drm/fence: add drm_crtc_create_fence() drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR drm/atomic: doc: remove old comment about nonblocking commits drm: Don't block the kworker waiting for mode_config.mutex in output_poll() drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver drm/amdgpu: don't add files at control minor debugfs directory drm: allow changing DPMS mode drm/qxl: fix use of uninitialized variable drm/qxl: Don't register debugfs for control minors drm/radeon: don't add files at control minor debugfs directory drm/vmwgfx: Switch to mode_cmd2 drm/vgem: Use ww_mutex_(un)lock even with a NULL context drm: Make the connector .detect() callback optional drm/bridge: tc358767: don't warn if display side ASSR enable fails drm: Initialise drm_mm.head_node.allocated drm: Fix locking cargo-cult in encoder/plane init/cleanup drm/doc: Fix indenting in drm_modeset_lock.c comment drm: Protect fb_helper list manipulation with a mutex ...
2016-12-09Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Misc fixes and cleanups for 4.10. Highlights: - Cursor fixes for radeon and amdgpu - DPM fixes for some new SI variants - Powerplay fixes - Clock and powergating fixes * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (39 commits) drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well drm/amdgpu: use pin rather than pin_restricted in a few cases drm/amd/powerplay: use pr_debug to print function not implemented message drm/amd/amdgpu: Add gpr reading for GFX v7 drm/amd/amdgpu: Add gpr reading for GFX v6 drm/amd/amdgpu: Add debugfs support for reading GPRs (v2) drm/amd/amdgpu: export vbios information (v2) drm/amd/amdgpu: stored bios_size drm/amdgpu: update golden setting of tonga drm/amdgpu/si: load the proper firmware on 0x87 oland boards drm/amdgpu: add additional pci revision to dpm workaround drm/radeon/si: load the proper firmware on 0x87 oland boards drm/radeon: add additional pci revision to dpm workaround drm/amd/powerplay: Fix potential NULL pointer issue drm/amdgpu: Don't touch GFX hw during HW fini drm/amd/powerplay: Adjust the position of data size initial drm/amd/powerplay: Ignore smu buffer usage drm/amd/powerplay: cut digest part drm/amdgpu: drop redundant vi_mqd define drm/amdgpu: fix gtt available page num accounting ...
2016-12-09Merge tag 'omapdrm-4.10-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm fixes for v4.10 * fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail * fix omapdrm primary plane allocation bug, which makes the display to fail to come up * tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: tpd12s015: fix error handling drm/omap: fix primary-plane's possible_crtcs drm: fix possible_crtc's type
2016-12-08net: ethernet: cpmac: Call SET_NETDEV_DEV()Florian Fainelli
The TI CPMAC driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: ethernet: lantiq_etop: Call SET_NETDEV_DEV()Florian Fainelli
The Lantiq Etop driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08vhost-vsock: fix orphan connection resetPeng Tao
local_addr.svm_cid is host cid. We should check guest cid instead, which is remote_addr.svm_cid. Otherwise we end up resetting all connections to all guests. Cc: stable@vger.kernel.org [4.8+] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09ACPICA: Utilities: Add new decode function for parser valuesBob Moore
ACPICA commit 198fde8a061ac77357bcf1752e3c988fbe59f128 Implements a decode function for the ARGP_* parser info values for all AML opcodes. Link: https://github.com/acpica/acpica/commit/198fde8a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08dm cache policy smq: use hash_32() instead of hash_32_generic()Mike Snitzer
Switch to using hash_32() because hash_32_generic() should only be used by the kernel's selftests. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08clk: add devm_get_clk_from_child() APIKuninori Morimoto
Some driver is using this type of DT bindings for clock (more detail, see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt). sound_soc { ... cpu { clocks = <&xxx>; ... }; codec { clocks = <&xxx>; ... }; }; Current driver in this case uses of_clk_get() for each node, but there is no devm_of_clk_get() today. OTOH, the problem of having devm_of_clk_get() is that it encourages the use of of_clk_get() when clk_get() is more desirable. Thus, this patch adds new devm_get_clk_from_chile() which explicitly reads as get a clock from a child node of this device. By this function, we can also use this type of DT bindings sound_soc { clocks = <&xxx>, <&xxx>; clock-names = "cpu", "codec"; clock-ranges; ... cpu { ... }; codec { ... }; }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [sboyd@codeurora.org: Rename subject to clk + add API] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: st: clk-flexgen: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: keystone: pll: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if of_pll_div_clk_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and ↵Arvind Yadav
of_iomap Free memory and memory mapping , if mmp2_clk_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [sboyd@codeaurora.org: Put return at the right place] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and ↵Arvind Yadav
of_iomap Free memory and memory mapping , if pxa910_clk_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: mmp: clk-of-pxa1928: Free memory obtained by kzallocArvind Yadav
Free memory, if init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: cdce925: Fix limit checkChristophe JAILLET
It is likely that instead of '1>64', 'q>64' was expected. Moreover, according to datasheet, http://www.ti.com/lit/ds/symlink/cdce925.pdf SCAS847I - JULY 2007 - REVISED OCTOBER 2016 PLL settings limits are: 16 <= q <= 63 So change the upper limit check from 64 to 63. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm: Make COMMON_CLK_IPROC into a libraryStephen Boyd
The broadcom clk driver Kconfig file selects and depends on the COMMON_CLK_IPROC config for different SoC specific drivers. Let's simplify this by always selecting the COMMON_CLK_IPROC config, turning it into a set of library code. We still want to retain the SoC specific options, so we leave those in place. Since we're here we also drop COMMON_CLK dependency because that's implicitly handled by including this file in drivers/clk/Kconfig in the right place and also make CLK_BCM_KONA default to y on the architecture it exists for instead of plain default y. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: qoriq: added ls1012a clock configurationTang Yuantian
Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> [sboyd@codeaurora.org: Sorted list] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08Merge tag 'linux-can-fixes-for-4.9-20161208' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-08 this is a pull request for one patch. Jiho Chu found and fixed a use-after-free error in the cleanup path in the peak pcan USB CAN driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08cxgb4/cxgb4vf: Assign netdev->dev_port with port IDArjun V
Added missing dev_port assignment in cxgb4vf driver. Also made dev_port assignment of cxgb4 in sync with cxgb4vf driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF error handlingRaghu Vatsavayi
Adds support for VF error handling. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF timestampRaghu Vatsavayi
Adds support for VF timestamp. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF ethtool statsRaghu Vatsavayi
Adds support for VF ethtool stats Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF vxlanRaghu Vatsavayi
Adds VF vxlan offload support. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF vlan supportRaghu Vatsavayi
Adds support for VF vlan features. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot ↵Grygorii Strashko
message Prevent creating clk alias for non existing gmac_gmii_ref_clk_div clock and, this way, eliminate excessive error message during boot: "ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div" Fixes: c097338ebd3f ("ARM: dts: dra7: cpsw: fix clocks tree") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clockBoris Brezillon
The VEC clock requires needs to be set at exactly 108MHz. Allow rate change propagation on PLLH_AUX to match this requirement wihtout impacting other IPs (PLLH is currently only used by the HDMI encoder, which cannot be enabled when the VEC encoder is enabled). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm: Support rate change propagation on bcm2835 clocksBoris Brezillon
Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set to a precise rate (in our case 108MHz). With the current implementation, where peripheral clocks are not allowed to forward rate change requests to their parents, it is impossible to match this requirement unless the bootloader has configured things correctly, or a specific rate has been assigned through the DT (with the assigned-clk-rates property). Add a new field to struct bcm2835_clock_data to specify which parent clocks accept rate change propagation, and support set rate propagation in bcm2835_clock_determine_rate(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clkBoris Brezillon
bcm2835_pll_divider_off() is resetting the divider field in the A2W reg to zero when disabling the clock. Make sure we preserve this value by reading the previous a2w_reg value first and ORing the result with A2W_PLL_CHANNEL_DISABLE. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08nbd: use dev_err_ratelimited in io pathJosef Bacik
While doing stress tests we noticed that we'd get a lot of dmesg spam if we suddenly disconnected the nbd device out of band. Rate limit the messages in the io path in order to deal with this. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-08nbd: reset the setup task for NBD_CLEAR_SOCKJosef Bacik
If an app exits before running NBD_DO_IT but after adding sockets we can end up not being allowed to do a new nbd device. Fix this by making NBD_CLEAR_SOCK reset the setup_task. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-08scsi: aacraid: remove wildcard for series 9 controllersKevin Barnett
Controllers with this PCI ID never shipped outside of PMCS/Microsemi. Remove the ID from the aacraid driver. smartpqi is the correct driver for these controllers. [mkp: patch description] Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ibmvscsi: add write memory barrier to CRQ processingTyrel Datwyler
The first byte of each CRQ entry is used to indicate whether an entry is a valid response or free for the VIOS to use. After processing a response the driver sets the valid byte to zero to indicate the entry is now free to be reused. Add a memory barrier after this write to ensure no other stores are reordered when updating the valid byte. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ibmvscsi: log bad SRP response opcode in hex formatTyrel Datwyler
An unrecogonized or unsupported SRP response has its opcode currently logged in decimal format. Log it in hex format instead so it can easily be validated against the SRP specs values which are in hex. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ibmvscsi: add vscsi hosts to global list_headTyrel Datwyler
Add each vscsi host adatper to a new global list_head named ibmvscsi_head. There is no functional change. This is meant primarily as a convience for locating adapters from within the debugger or crash utility. [mkp: fixed typo] Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ufs-qcom: fix bug with read/modify write of UFS_CFG1Subhash Jadavani
ufs_qcom_print_hw_debug_reg_all() function is having a bug where it might incorrectly modify undesired bits in UFS_CFG1 register, this change fixes it. Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ufs: add quirk to increase host PA_SaveConfigTimeSubhash Jadavani
The maximum value PA_SaveConfigTime is 250 (10us) but this is not enough for some vendors. Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime. Gear switch can be issued by host controller as an error recovery and any software delay will not help on this case so we need to increase PA_SaveConfigTime to >32us as per vendor recommendation. This change adds a quirk to increase the PA_SaveConfigTime parameter. Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ufs-qcom: add probe_defer in case phy driver not probed yetYaniv Gardi
In case UFS driver is probed before the phy driver does, the UFS driver should return a PROBE_DEFER code. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: ufs: add support for UFS HCI 2.1Yaniv Gardi
The UFS HCI v2.1 includes a few additional registers. This change updates the HCI register, the UFS version register content and the Interrupt Status register. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-08scsi: g_NCR5380: Autoprobe board IRQ by defaultFinn Thain
Automatically probe the board irq when no irq parameter is provided, to simulate PnP. The old default behaviour was to disable the irq. Update driver documentation accordingly and add some printk messages to make this behaviour visible. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-16 14:25:33 +0000