summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-21watchdog: Add Renesas RZ/N1 Watchdog driverPhil Edworthy
This is a driver for the standard WDT on the RZ/N1 devices. This WDT has very limited timeout capabilities. However, it can reset the device. To do so, the corresponding bits in the SysCtrl RSTEN register need to be enabled. This is not done by this driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: wdat_wdt: Stop watchdog when uninstalling moduleLiu Xinpeng
Test shows that wachdog still reboots machine after the module is removed. Use watchdog_stop_on_unregister to stop the watchdog on removing. Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> eviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1650984810-6247-4-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: wdat_wdt: Stop watchdog when rebooting the systemLiu Xinpeng
Executing reboot command several times on the machine "Dell PowerEdge R740", UEFI security detection stopped machine with the following prompt: UEFI0082: The system was reset due to a timeout from the watchdog timer. Check the System Event Log (SEL) or crash dumps from Operating Sysstem to identify the source that triggered the watchdog timer reset. Update the firmware or driver for the identified device. iDRAC has warning event: "The watchdog timer reset the system". This patch fixes this issue by adding the reboot notifier. Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: wdat_wdt: Using the existing function to check parameter timeoutLiu Xinpeng
If max_hw_heartbeat_ms is provided, the configured maximum timeout is not limited by it. The limit check in this driver therefore doesn't make much sense. Similar, the watchdog core ensures that minimum timeout limits are met if min_hw_heartbeat_ms is set. Using watchdog_timeout_invalid() makes more sense because it takes this into account. Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1650984810-6247-2-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: iTCO_wdt: Using existing macro define covers more scenariosLiu Xinpeng
For power management, SET_NOIRQ_SYSTEM_SLEEP_PM_OPS defined for CONFIG_PM_SLEEP, will point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same function. Vice versa happens for ->resume_noirq, ->thaw_noirq and ->restore_noirq. Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1650967905-3199-1-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: rti-wdt: Fix pm_runtime_get_sync() error checkingMiaoqian Lin
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220412070824.23708-1-linmq006@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeatJan Kiszka
This ensures that the same value is read back as was eventually programmed when using seconds as accuracy. Even then, comparing the more precise heartbeat_ms against heartbeat in seconds will almost never provide a match and will needlessly raise a warning. Fix by comparing apples to apples. Tested in combination with U-Boot as watchdog starter. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/6a4b54ac-9588-e172-c4c7-b91d524a851e@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: sp805: disable watchdog on removeEliav Farber
Disable the watchdog if it is active while removing the module. It is necessary in order to prevent a reset in case watchdog hw was running before the removal. Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220414054233.1357-2-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: da9063: optionally disable watchdog during suspendPrimoz Fiser
Optionally disable watchdog during suspend (if enabled) and re-enable it upon resume. This enables boards to sleep without being interrupted by the watchdog. This patch is based on commit f6c98b08381c ("watchdog: da9062: add power management ops") and commit 8541673d2a5f ("watchdog: da9062: fix power management ops") and brings the same functionality to DA9063. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Reviewed-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220422072713.3172345-2-primoz.fiser@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21i2c: rcar: refactor handling of first messageWolfram Sang
After moving ICMSR handling to interrupt handlers previously to fix a race condition, we can now also move ICMSR handling for the first message out of the function to prepare a message. By introducing a seperate function to initialize the first message, we can not only remove some code duplication but the remaining code is also easier to follow. The function to prepare a message is much simpler without ICMSR handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: avoid race condition with SMIsWolfram Sang
A customer experienced a race condition with 'repeated starts' when a System Management Interrupt took over for 30us and more. The problem was that during the SMI a new MAT interrupt came in because we set up the 'repeated start' condition. But the old one was not acknowledged yet. So, when it was acknowledged after the SMI, the new MAT interrupt was lost, confusing the state machine of the driver. The fix consists of two parts. First, we do not clear the status register for 'repeated starts' when preparing the next message anymore. The interrupt handlers for sending and receiving data is now solely responsible for that and it makes the code easier to follow, in fact. Secondly, clearing the status register is now split up to handle MAT interrupts independently. This avoids the race condition because the old MAT interrupt will be now cleared before we initiate the "repeated start" condition. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: xiic: Correct the datatype for rx_watermarkShubhrajyoti Datta
The message length data type should be u16 as per the i2c_msg structure. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: fix PM ref counts in probe error pathsKuninori Morimoto
We have to take care of ID_P_PM_BLOCKED when bailing out during probe. Fixes: 7ee24eb508d6 ("i2c: rcar: disable PM in multi-master mode") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Handle spurious interruptsTali Perry
On some platforms in rare cases (1 to 100,000 transactions), the i2c gets a spurious interrupt which means that we enter an interrupt but in the interrupt handler we don't find any status bit that points to the reason we got this interrupt. This may be a case of a rare HW issue or signal integrity issue that is still under investigation. In order to overcome this we are doing the following: 1. Disable incoming interrupts in master mode only when slave mode is not enabled. 2. Clear end of busy (EOB) after every interrupt. 3. Clear other status bits (just in case since we found them cleared) 4. Return correct status during the interrupt that will finish the transaction. On next xmit transaction if the bus is still busy the master will issue a recovery process before issuing the new transaction. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Correct register access widthTyrone Ting
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always incorrect, but simply didn't cause a visible error on the 32-bit machine. On the 64-bit machine, the kernel message reports that ESR value is 0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that it's the alignment fault. SMBnCTL3's address is 0xE. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Add tx complete counterTali Perry
tx_complete counter is used to indicate successful transaction count. Similar counters for failed tx were previously added. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Fix timeout calculationTali Perry
Use adap.timeout for timeout calculation instead of hard-coded value of 35ms. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Remove unused variable clk_regmapTali Perry
Remove unused variable clk_regmap. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Change the way of getting GCR regmapTali Perry
Change the way of getting NPCM system manager reigster (GCR) and still maintain the old mechanism as a fallback if getting nuvoton,sys-mgr fails while working with the legacy devicetree file. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Three clk driver fixes to close out the release - Fix a divider calculation breaking boot on Broadcom bcm2835 - Fix HDMI output on Tanix TX6 mini board by reverting a patch - Fix clk_set_rate_range() calls on at91 by considering the range while calculating the divisor" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: generated: consider range when calculating best rate Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6" clk: bcm2835: fix bcm2835_clock_choose_div
2022-05-20Merge tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Few final fixes for 5.18, one amdgpu, core dp mst leak fix, dma-buf two fixes, and i915 has a few fixes, one for a regression on older GM45 chipsets, dma-buf: - ioctl userspace use fix - fix dma-buf sysfs name generation core: - dp/mst leak fix amdgpu: - suspend/resume regression fix i915: - fix for #5806: GPU hangs and display artifacts on Intel GM45 - reject DMC with out-of-spec MMIO - correctly mark guilty contexts on GuC reset" * tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm: drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap drm/amd: Don't reset dGPUs if the system is going to s2idle drm/dp/mst: fix a possible memory leak in fetch_monitor_name() dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace i915/guc/reset: Make __guc_reset_context aware of guilty engines drm/i915/dmc: Add MMIO range restrictions dma-buf: ensure unique directory name for dmabuf stats
2022-05-20clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()Christophe JAILLET
We should have 'n', then 'size', not the opposite. This is harmless because the 2 values are just multiplied, but having the correct order silence a (unpublished yet) smatch warning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/49d726d11964ca0e3757bdb5659e3b3eaa1572b5.1653081643.git.christophe.jaillet@wanadoo.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add safe mux managementGabriel Fernandez
Some muxes need to set a the safe position when clock is off. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-12-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add multi mux functionGabriel Fernandez
Some RCC muxes can manages two output clocks with same register. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-11-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add all STM32MP13 kernel clocksGabriel Fernandez
Complete all kernel clocks of stm32mp13. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-10-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add all STM32MP13 peripheral clocksGabriel Fernandez
All peripheral clocks are mainly based on stm32_gate clock. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-9-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: manage secured clocksGabriel Fernandez
Don't register a clock if this clock is secured. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-8-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add composite clockGabriel Fernandez
Just to introduce management of stm32 composite clock. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-7-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add stm32 divider clockGabriel Fernandez
Just to introduce management of a stm32 divider clock Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-6-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add stm32_gate managementGabriel Fernandez
Just to introduce management of a stm32 gate clock. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-5-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32mp13: add stm32_mux clock managementGabriel Fernandez
Just to introduce management of a stm32 mux clock. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-4-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)Gabriel Fernandez
This driver manages Reset and Clock of STM32MP13 soc. It uses a clk-stm32-core module to manage stm32 gate, mux and divider for STM32MP13 and for new future soc. All gates, muxes, dividers are identify by an index and information are stored in array (register address, shift, with, flags...) This is useful when we have two clocks with the same gate or when one mux manages two output clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: ti: clkctrl: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220324071019.59483-1-jakobkoschel@gmail.com Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: ti: composite: Prefer kcalloc over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210904131714.2312-1-len.baker@gmx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20wwan: iosm: use a flexible array rather than allocate short objectsJakub Kicinski
GCC array-bounds warns that ipc_coredump_get_list() under-allocates the size of struct iosm_cd_table *cd_table. This is avoidable - we just need a flexible array. Nothing calls sizeof() on struct iosm_cd_list or anything that contains it. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220520060013.2309497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20hv_netvsc: Fix potential dereference of NULL pointerYongzhi Liu
The return value of netvsc_devinfo_get() needs to be checked to avoid use of NULL pointer in case of an allocation failure. Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation") Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1652962188-129281-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: mscc: fix the alignment in ocelot_port_fdb_del()Alaa Mohamed
align the extack argument of the ocelot_port_fdb_del() function. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Link: https://lore.kernel.org/r/20220520002040.4442-1-eng.alaamohamedsoliman.am@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: vxlan: Fix kernel coding styleAlaa Mohamed
The continuation line does not align with the opening bracket and this patch fix it. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Link: https://lore.kernel.org/r/20220520003614.6073-1-eng.alaamohamedsoliman.am@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20eth: bnxt: make ulp_id unsigned to make GCC 12 happyJakub Kicinski
GCC array bounds checking complains that ulp_id is validated only against upper bound. Make it unsigned. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220520061955.2312968-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: wwan: t7xx: use GFP_ATOMIC under spin lock in t7xx_cldma_gpd_set_next_ptr()Yang Yingliang
Sometimes t7xx_cldma_gpd_set_next_ptr() is called under spin lock, so add 'gfp_mask' parameter in t7xx_cldma_gpd_set_next_ptr() to pass the flag. Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20220519032108.2996400-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: tulip: fix build with CONFIG_GSCRolf Eike Beer
Fix typo which breaks build for parisc. Fixes: 3daebfbeb455 ("net: tulip: convert to devres") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYuCzU5VZ_nc+6NEdBXJdVCH=J2SB1Na1G_NS_0BNdGYtg@mail.gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/4719560.GXAFRqVoOG@eto.sf-tec.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20amt: fix memory leak for advertisement messageTaehee Yoo
When a gateway receives an advertisement message, it extracts relay information and then it should be freed. But the advertisement handler doesn't free it. So, memory leak would occur. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20amt: fix gateway mode stuckTaehee Yoo
If a gateway can not receive any response to requests from a relay, gateway resets status from SENT_REQUEST to INIT and variable about a relay as well. And then it should start the full establish step from sending a discovery message and receiving advertisement message. But, after failure in amt_req_work() it continues sending a request message step with flushed(invalid) relay information and sets SENT_REQUEST. So, a gateway can't be established with a relay. In order to avoid this situation, it stops sending the request message step if it fails. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: stmmac: fix out-of-bounds access in a selftestJakub Kicinski
GCC 12 points out that struct tc_action is smaller than struct tcf_action: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c: In function ‘stmmac_test_rxp’: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1132:21: warning: array subscript ‘struct tcf_gact[0]’ is partly outside array bounds of ‘unsigned char[272]’ [-Warray-bounds] 1132 | gact->tcf_action = TC_ACT_SHOT; | ^~ Fixes: ccfc639a94f2 ("net: stmmac: selftests: Add a selftest for Flexible RX Parser") Link: https://lore.kernel.org/r/20220519004305.2109708-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20sfc/siena: Remove duplicate check on segmentsMartin Habets
Siena only supports software TSO. This means more code can be deleted, as pointed out by the Smatch static checker warning: drivers/net/ethernet/sfc/siena/tx.c:184 __efx_siena_enqueue_skb() warn: duplicate check 'segments' (previous on line 158) Fixes: 956f2d86cb37 ("sfc/siena: Remove build references to missing functionality") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/kernel-janitors/YoH5tJMnwuGTrn1Z@kili/ Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/165294463549.23865.4557617334650441347.stgit@palantir17.mph.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-21Merge tag 'drm-intel-fixes-2022-05-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix for #5806: GPU hangs and display artifacts on 5.18-rc3 on Intel GM45 - reject DMC with out-of-spec MMIO (Cc: stable) - correctly mark guilty contexts on GuC reset. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YocqqvG6PbYx3QgJ@jlahtine-mobl.ger.corp.intel.com
2022-05-21Merge tag 'drm-misc-fixes-2022-05-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fix for a memory leak in dp_mst, a (userspace) build fix for DMA_BUF_SET_NAME defines and a directory name generation fix for dmabuf stats Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520072408.cpjzy2taugagvrh7@houat
2022-05-20cxl/port: Enable HDM Capability after validating DVSEC RangesDan Williams
CXL memory expanders that support the CXL 2.0 memory device class code include an "HDM Decoder Capability" mechanism to supplant the "CXL DVSEC Range" mechanism originally defined in CXL 1.1. Both mechanisms depend on a "mem_enable" bit being set in configuration space before either mechanism activates. When the HDM Decoder Capability is enabled the CXL DVSEC Range settings are ignored. Previously, the cxl_mem driver was relying on platform-firmware to set "mem_enable". That is an invalid assumption as there is no requirement that platform-firmware sets the bit before the driver sees a device, especially in hot-plug scenarios. Additionally, ACPI-platforms that support CXL 2.0 devices also support the ACPI CEDT (CXL Early Discovery Table). That table outlines the platform permissible address ranges for CXL operation. So, there is a need for the driver to set "mem_enable", and there is information available to determine the validity of the CXL DVSEC Ranges. Arrange for the driver to optionally enable the HDM Decoder Capability if "mem_enable" was not set by platform firmware, or the CXL DVSEC Range configuration was invalid. Be careful to only disable memory decode if the kernel was the one to enable it. In other words, if CXL is backing all of kernel memory at boot the device needs to maintain "mem_enable" and "HDM Decoder enable" all the way up to handoff back to platform firmware (e.g. ACPI S5 state entry may require CXL memory to stay active). Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info") Cc: Dan Carpenter <dan.carpenter@oracle.com> [dan: fix early terminiation of range-allowed loop] Cc: Ariel Sibley <ariel.sibley@microchip.com> [ariel: Memory_size must be non-zero] Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/165307136375.2499769.861793697156744166.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-20USB: new quirk for Dell Gen 2 devicesMonish Kumar R
Add USB_QUIRK_NO_LPM and USB_QUIRK_RESET_RESUME quirks for Dell usb gen 2 device to not fail during enumeration. Found this bug on own testing Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220520130044.17303-1-monish.kumar.r@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-20Merge tag 'usb-serial-5.19-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.19-rc1 Here are the USB-serial updates for 5.19-rc1, including: - a workaround for pl2303 devices with unexpected bcdUSB - a new modem device id Included is also a printk clean up. All but the modem-id commit have been in linux-next with no reported issues. * tag 'usb-serial-5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device USB: serial: ftdi_sio: clean up printk format specifier
generated by cgit (git 2.34.1) at 2025-09-15 19:48:21 +0000