summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-09-10HID: wacom: Support sequence numbers smaller than 16-bitJason Gerecke
The current dropped packet reporting assumes that all sequence numbers are 16 bits in length. This results in misleading "Dropped" messages if the hardware uses fewer bits. For example, if a tablet uses only 8 bits to store its sequence number, once it rolls over from 255 -> 0, the driver will still be expecting a packet "256". This patch adjusts the logic to reset the next expected packet to logical_minimum whenever it overflows beyond logical_maximum. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Joshua Dickens <joshua.dickens@wacom.com> Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages") Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-09-10drm/amdgpu/atomfirmware: Silence UBSAN warningAlex Deucher
Per the comments, these are variable sized arrays. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v1David (Ming Qiang) Wu
Similar to jpeg_v2_dec_ring_parse_cs() but it has different register ranges and a few other registers access. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3d5adbdf1d01708777f2eda375227cbf7a98b9fe) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v2+David (Ming Qiang) Wu
This patch extends the same cs parser from JPEG v4.0.3 to other JPEG versions (v2 and above). Rename to more common name as jpeg_v2_dec_ring_parse_cs() from jpeg_v4_0_3_dec_ring_parse_cs(). Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 88dcad2d07c8d82e6a097c8e74239eb67333bcf7) Cc: stable@vger.kernel.org
2024-09-10drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3Kenneth Feng
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below: 0: 2.5GT/s, x4 250Mhz 1: 8.0GT/s, x4 616Mhz * 2: 8.0GT/s, x4 1143Mhz * the middle level can be removed since it is always skipped on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fedf6db3ea9dc5eda0b78cfbbb8f7a88b97e5b24)
2024-09-10drm/amd/pm: update the features set on smu v14.0.2/3Kenneth Feng
update the features set on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 25d48f2eb0af1f0e6f09f54a1a1716f48c0722c9)
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 578aab4ecc73476393389440724b7a391cc0cea9)
2024-09-10drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5) Cc: stable@vger.kernel.org
2024-09-10drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) Cc: stable@vger.kernel.org
2024-09-10drm/amdkfd: Add cache line size infoDavid Belanger
Populate cache line size info in topology based on information from IP discovery table. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4e9fadacddca96a2e6fcee9cc9488b78eb7a6953)
2024-09-10drbd: Add NULL check for net_conf to prevent dereference in state validationMikhail Lobanov
If the net_conf pointer is NULL and the code attempts to access its fields without a check, it will lead to a null pointer dereference. Add a NULL check before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Cc: stable@vger.kernel.org Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru> Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10drm/tegra: Use iommu_paging_domain_alloc()Lu Baolu
Commit <17de3f5fdd35> ("iommu: Retire bus ops") removes iommu ops from the bus structure. The iommu subsystem no longer relies on bus for operations. So iommu_domain_alloc() interface is no longer relevant. Replace iommu_domain_alloc() with iommu_paging_domain_alloc() which takes the physical device from which the host1x_device virtual device was instantiated. This physical device is a common parent to all physical devices that are part of the virtual device. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-4-baolu.lu@linux.intel.com
2024-09-10drm/rockchip: Use iommu_paging_domain_alloc()Lu Baolu
Commit <421be3ee36a4> ("drm/rockchip: Refactor IOMMU initialisation") has refactored rockchip_drm_init_iommu() to pass a device that the domain is allocated for. Replace iommu_domain_alloc() with iommu_paging_domain_alloc() to retire the former. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Andy Yan <andyshrk@163.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-3-baolu.lu@linux.intel.com
2024-09-10ACPI: resource: Add another DMI match for the TongFang GMxXGxxWerner Sembach
Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might have GMxXGxX as the board name instead of GMxXGxx. Adding both to be on the safe side. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: CPPC: Add support for setting EPP register in FFHMario Limonciello
Some Asus AMD systems are reported to not be able to change EPP values because the BIOS doesn't advertise support for the CPPC MSR and the PCC region is not configured. However the ACPI 6.2 specification allows CPC registers to be declared in FFH: ``` Starting with ACPI Specification 6.2, all _CPC registers can be in PCC, System Memory, System IO, or Functional Fixed Hardware address spaces. OSPM support for this more flexible register space scheme is indicated by the “Flexible Address Space for CPPC Registers” _OSC bit. ``` If this _OSC has been set allow using FFH to configure EPP. Reported-by: al0uette@outlook.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686 Suggested-by: al0uette@outlook.com Tested-by: vderp@icloud.com Tested-by: al0uette@outlook.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20240910031524.106387-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: PM: Quirk ASUS ROG M16 to default to S3 sleepLuke D. Jones
The 2023 ASUS ROG Zephyrus M16 can suffer from quite a variety of events causing wakeup from s2idle sleep. The events may come from the EC being noisey, from the MMC reader, from the AniMe matrix display on some models or from AC events. Defaulting to S3 sleep prevents all these wakeup issues. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://patch.msgid.link/20240908053607.4213-1-luke@ljones.dev Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18Hans de Goede
The Panasonic Toughbook CF-18 advertises both native and vendor backlight control interfaces. But only the vendor one actually works. acpi_video_get_backlight_type() will pick the non working native backlight by default, add a quirk to select the working vendor backlight instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240907124419.21195-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10drm/amdgpu: get rid of bogus includes of fdtable.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amdkfd: CRIU fixesAl Viro
Instead of trying to use close_fd() on failure exits, just have criu_get_prime_handle() store the file reference without inserting it into descriptor table. Then, once the callers are past the last failure exit, they can go and either insert all those file references into the corresponding slots of descriptor table, or drop all those file references and free the unused descriptors. Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amdgpu: fix a race in kfd_mem_export_dmabuf()Al Viro
Using drm_gem_prime_handle_to_fd() to set dmabuf up and insert it into descriptor table, only to have it looked up by file descriptor and remove it from descriptor table is not just too convoluted - it's racy; another thread might have modified the descriptor table while we'd been going through that song and dance. Switch kfd_mem_export_dmabuf() to using drm_gem_prime_handle_to_dmabuf() and leave the descriptor table alone... Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm: new helper: drm_gem_prime_handle_to_dmabuf()Al Viro
Once something had been put into descriptor table, the only thing you can do with it is returning descriptor to userland - you can't withdraw it on subsequent failure exit, etc. You certainly can't count upon it staying in the same slot of descriptor table - another thread could've played with close(2)/dup2(2)/whatnot. drm_gem_prime_handle_to_fd() creates a dmabuf, allocates a descriptor and attaches dmabuf's file to it (the last two steps are done in dma_buf_fd()). That's nice when all you are going to do is passing a descriptor to userland. If you just need to work with the resulting object or have something else to be done that might fail, drm_gem_prime_handle_to_fd() is racy. The problem is analogous to one with anon_inode_getfd(), and solution is similar to what anon_inode_getfile() provides. Add drm_gem_prime_handle_to_dmabuf() - the "set dmabuf up" parts of drm_gem_prime_handle_to_fd() without the descriptor-related ones. Instead of inserting into descriptor table and returning the file descriptor it just returns the struct file. drm_gem_prime_handle_to_fd() becomes a wrapper for it. Other users will be introduced in the next commit. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amdgpu/atomfirmware: Silence UBSAN warningAlex Deucher
Per the comments, these are variable sized arrays. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'Srinivasan Shanmugam
This commit updates described non-existent parameters 'resv' and 'sync_mode', and failed to describe the existing 'sync' parameter. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or struct member 'sync' not described in 'amdgpu_vm_cpu_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'resv' description in 'amdgpu_vm_cpu_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'sync_mode' description in 'amdgpu_vm_cpu_prepare' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v1David (Ming Qiang) Wu
Similar to jpeg_v2_dec_ring_parse_cs() but it has different register ranges and a few other registers access. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v2+David (Ming Qiang) Wu
This patch extends the same cs parser from JPEG v4.0.3 to other JPEG versions (v2 and above). Rename to more common name as jpeg_v2_dec_ring_parse_cs() from jpeg_v4_0_3_dec_ring_parse_cs(). Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3Kenneth Feng
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below: 0: 2.5GT/s, x4 250Mhz 1: 8.0GT/s, x4 616Mhz * 2: 8.0GT/s, x4 1143Mhz * the middle level can be removed since it is always skipped on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amd/pm: update the features set on smu v14.0.2/3Kenneth Feng
update the features set on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/amdkfd: Fix resource leak in criu restore queueJesse Zhang
To avoid memory leaks, release q_extra_data when exiting the restore queue. v2: Correct the proto (Alex) Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852BHilda Wu
For tracking multiple devices concurrently with a condition. The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk on RTL8852B controller. The quirk setting is based on commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") With this setting, when a pattern monitor detects a device, this feature issues an address monitor for tracking that device. Let the original pattern monitor keep monitor new devices. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btrtl: Use kvmemdup to simplify the codeLi Zetao
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code. No functional change intended. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608Pavel Nikulin
Add the support ID (0x13d3, 0x3608) to usb_device_id table for Realtek MT7925B14L found on AW-EM637 WiFi+BT modules in 2024 Asus laptops. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3608 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Pavel Nikulin <pavel@noa-labs.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btrtl: Add the support for RTL8922AMax Chou
Add the support for RTL8922A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8922 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C885A01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_ldisc: Use speed set by btattach as oper_speedFrédéric Danis
Starting a BCM UART controller not defined as a platform device or a serdev with "btattach -B /dev/ttyS1 -P bcm -S 3000000" works fine but the serial port remains at the init_speed, i.e. 115200. The oper_speed is only set if a device is declared in ACPI, device tree or as a platform device. This commit copies the serial port speed fixed by hciattach to the oper_speed on line discipline opening. Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btnxpuart: Add support for ISO packetsNeeraj Sanjay Kale
This enables btnxpuart driver to handle ISO RX packet when DUT is configured as audio sink. Tested IW612 on iMX8MMini platform and BlueZ-5.77 as follows: 1) Configured DUT with bap_bcast_sink role in pipewire configuration file. 2) Started pipewire and DUT is able to sync with Broadcast source through pipewire. 3) ISO data RX is seen in btmon. 4) Audio/Music is heard on audio jack. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Sarveshwar Bajaj <sarveshwar.bajaj@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_h4: Add support for ISO packets in h4_recv.hNeeraj Sanjay Kale
This adds ISO packet support in h4_recv.h, which was created before ISO packet handling was added to hci_h4.c and hci_uart.c Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122Hilda Wu
Add the support ID (0x0489, 0xe122) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e122 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Invert LE State flag to set invalid rather then validLuiz Augusto von Dentz
This inverts the LE State flag so by default we assume the controllers would report valid states rather than invalid so it is inline with the respective quirk (HCI_QUIRK_BROKEN_LE_STATES). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_uart: Add support for Amlogic HCI UARTYang Li
Add a new HCI protocol HCI_UART_AML for the Amlogic Bluetooth controller. It works on the standard H4 protocol via a 4-wire UART interface, with baud rates up to 4 Mbps. The controller supports two types of commands: the TCI commands and the vendor command. The former is for initial setup including setting baud rates, downloading fw, starting chip and etc, while the latter is for dumping firmware versions and setting public address after firmware updates and normal startup. It was verified on board of T602 (S905X4 + W265S2). dmesg: .. [ 5.313450] Bluetooth: HCI UART protocol AML registered [ 6.506052] Bluetooth: hci0: fw_version: date = 42.28, number = 0xb2fd ... Co-developed-by: Ye He <ye.he@amlogic.com> Signed-off-by: Ye He <ye.he@amlogic.com> Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604Alexander Hall
This patch fixes bluetooth support on the MediaTek MT7925 WiFi 7 + BT 5.3 M.2 chipset that I purchased from aliexpress (and which arrived today). The PCB states that it is an MT7925B22M. Device from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3604 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us High fidelity images I took of the chip itself for future reference: https://archive.org/details/MediaTek-MT7925B22M/ Webpage the chip was purchased from, note it is different from the images taken: https://web.archive.org/web/20240620021119/https://www.aliexpress. us/item/3256806821207897.html Signed-off-by: Alexander Hall <bearodark@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btintel_pcie: Add support for ISO dataKiran
Add support for handling ISO RX and TX packets. Signed-off-by: Kiran <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10virtio_net: disable premapped mode by defaultXuan Zhuo
Now, the premapped mode encounters some problem. http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com So we disable the premapped mode by default. We can re-enable it in the future. Fixes: f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api") Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com> Closes: http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-4-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Revert "virtio_net: big mode skip the unmap check"Xuan Zhuo
This reverts commit a377ae542d8d0a20a3173da3bbba72e045bea7a9. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-3-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Revert "virtio_net: rx remove premapped failover code"Xuan Zhuo
This reverts commit defd28aa5acb0fd7c15adc6bc40a8ac277d04dea. Recover the code to disable premapped mode. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-2-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-10drm/syncobj: Fix syncobj leak in drm_syncobj_eventfd_ioctlT.J. Mercier
A syncobj reference is taken in drm_syncobj_find, but not released if eventfd_ctx_fdget or kzalloc fails. Put the reference in these error paths. Reported-by: Xingyu Jin <xingyuj@google.com> Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by. Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org # 6.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20240909205400.3498337-1-tjmercier@google.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-09-10i2c: ljca: Remove unused "target_addr" parameterAndi Shyti
The stop command doesn't use any address on the target: w_packet->data[0] = 0; and indeed the targed_addr parameter was unused. Remove it. Cc: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-10nvme-tcp: fix link failure for TCP authArnd Bergmann
The nvme fabric driver calls the nvme_tls_key_lookup() function from nvmf_parse_key() when the keyring is enabled, but this is broken in a configuration with CONFIG_NVME_FABRICS=y and CONFIG_NVME_TCP=m because this leads to the function definition being in a loadable module: x86_64-linux-ld: vmlinux.o: in function `nvmf_parse_key': fabrics.c:(.text+0xb1bdec): undefined reference to `nvme_tls_key_lookup' Move the 'select' up to CONFIG_NVME_FABRICS itself to force this part to be built-in as well if needed. Fixes: 5bc46b49c828 ("nvme-tcp: check for invalidated or revoked key") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-09-10RDMA/hns: Fix restricted __le16 degrades to integer issueJunxian Huang
Fix sparse warnings: restricted __le16 degrades to integer. Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409080508.g4mNSLwy-lkp@intel.com/ Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20240909065331.3950268-1-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-10IB/qib: Remove unused declarations in header fileZhang Zekun
The definition of qib_rc_rnr_retry() has been removed since commit b4238e70579c ("IB/qib: Use new rdmavt timers"). Also, the definition of mr_rcu_callback() has been remove since commit 7c2e11fe2dbe ("IB/qib: Remove qp and mr functionality from qib"). So, let's remove the unused declartions. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Link: https://patch.msgid.link/20240909121408.80079-3-zhangzekun11@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-10IB/iser: Remove unused declaration in header fileZhang Zekun
The definition of iser_finalize_rdma_unaligned_sg() has been removed since commit dd0107a08996 ("IB/iser: set block queue_virt_boundary"). Let's remove the unused declaration in header file. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Link: https://patch.msgid.link/20240909121408.80079-2-zhangzekun11@huawei.com Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-18 04:55:01 +0000