summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-08-28ethernet: tg3: remove unreachable codeMikhail Kobuk
'tp->irq_max' value is either 1 [L16336] or 5 [L16354], as indicated in tg3_get_invariants(). Therefore, 'i' can't exceed 4 in tg3_init_one() that makes (i <= 4) always true. Moreover, 'intmbx' value set at the last iteration is not used later in it's scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 78f90dcf184b ("tg3: Move napi_add calls below tg3_get_invariants") Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: print error message incase of invalid pf mappingHariprasad Kelam
During AF driver initialization, it creates a mapping between pf to cgx,lmac pair. Whenever there is a physical link change, using this mapping driver forwards the message to the associated netdev. This patch prints error message incase of cgx,lmac pair is not associated with any pf netdev. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: Add validation of lmacHariprasad Kelam
With the addition of new MAC blocks like CN10K RPM and CN10KB RPM_USX, LMACs are noncontiguous. Though in most of the functions, lmac validation checks exist but in few functions they are missing. This patch adds the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: Don't treat lack of CGX interfaces as errorSunil Goutham
Don't treat lack of CGX LMACs on the system as a error. Instead ignore it so that LBK VFs are created and can be used. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: CN10KB: Add USGMII LMAC modeHariprasad Kelam
Upon physical link change, firmware reports to the kernel about the change along with the details like speed, lmac_type_id, etc. Kernel derives lmac_type based on lmac_type_id received from firmware. This patch extends current lmac list with new USGMII mode supported by CN10KB RPM block. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()Liao Chang
Since the 'cpus' field of policy structure will become empty in the cpufreq core API, it is better to use 'related_cpus' in the exit() callback of driver. Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly") Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28cpufreq: tegra194: add online/offline hooksSumit Gupta
Implement the light-weight tear down and bring up helpers to reduce the amount of work to do on CPU offline/online operation. This change helps to make the hotplugging paths much faster. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/ [ Viresh: Fixed rebase conflict ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28igb: set max size RX buffer when store bad packet is enabledRadoslaw Tyl
Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: stable@vger.kernel.org Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_packetDima Chumak
Implement devlink port function commands to enable / disable IPsec packet offloads. This is used to control the IPsec capability of the device. When ipsec_offload is enabled for a VF, it prevents adding IPsec packet offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec packet offloads on the PF, it's not allowed to enable ipsec_packet on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_cryptoDima Chumak
Implement devlink port function commands to enable / disable IPsec crypto offloads. This is used to control the IPsec capability of the device. When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec crypto offloads on the PF, it's not allowed to enable ipsec_crypto on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Provide an interface to block change of IPsec capabilitiesLeon Romanovsky
mlx5 HW can't perform IPsec offload operation simultaneously both on PF and VFs at the same time. While the previous patches added devlink knobs to change IPsec capabilities dynamically, there is a need to add a logic to block such IPsec capabilities for the cases when IPsec is already configured. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5e: Rewrite IPsec vs. TC block interfaceLeon Romanovsky
In the commit 366e46242b8e ("net/mlx5e: Make IPsec offload work together with eswitch and TC"), new API to block IPsec vs. TC creation was introduced. Internally, that API used devlink lock to avoid races with userspace, but it is not really needed as dev->priv.eswitch is stable and can't be changed. So remove dependency on devlink lock and move block encap code back to its original place. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Drop extra layer of locks in IPsecLeon Romanovsky
There is no need in holding devlink lock as it gives nothing compared to already used write mode_lock. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small driver fixes and one larger unused function set removal in the raid class (so no external impact)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic
2023-08-27parisc: lasi: Initialize LASI driver via arch_initcall()Helge Deller
Move initialization code for LASI out of the GSC driver. Since ASP and WAX have been moved in previous commits, the GSC driver is now just a driver which provides library functions for LASI, ASP and WAX and as such doesn't need an own initialization function any longer. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: asp: Initialize asp driver via arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: wax: Initialize wax driver via arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: iosapic: Convert I/O Sapic driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: sba_iommu: Convert SBA IOMMU driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: led: Move register_led_regions() to late_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: lba: Convert LBA PCI bus driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: gsc: Convert GSC bus driver to use arch_initcall()Helge Deller
This conversion includes LASI, ASP and WAX drivers for now. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: ccio: Convert CCIO driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: eisa: Convert HP EISA bus driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: hppb: Convert HP PB bus driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: dino: Convert dino PCI bus driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: Makefile: Adjust order in which drivers should be loadedHelge Deller
This is the order in which the drivers are initialized in setup.c. The order is important when the drivers are convertet to use the initcall_*() startup framework. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex supportGrygorii Strashko
For AM65x SR2.0 it's required to enable IEP1 in raw 64bit mode which is used by PRU FW to monitor the link and apply w/a for 10M link issue. Note. No public errata available yet. Without this w/a the PRU FW will stuck if link state changes under TX traffic pressure. Hence, add support for 10M full duplex for AM65x SR2.0: - add new IEP API to enable IEP, but without PTP support - add pdata quirk_10m_link_issue to enable 10M link issue w/a. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27net: ti: icssg-prueth: add packet timestamping and ptp supportRoger Quadros
Add packet timestamping TS and PTP PHC clock support. For AM65x and AM64x: - IEP1 is not used - IEP0 is configured in shadow mode with 1ms cycle and shared between Linux and FW. It provides time and TS in number cycles, so special conversation in ns is required. - IEP0 shared between PRUeth ports. - IEP0 supports PPS, periodic output. - IEP0 settime() and enabling PPS required FW interraction. - RX TS provided with each packet in CPPI5 descriptor. - TX TS returned through separate ICSSG hw queues for each port. TX TS readiness is signaled by INTC IRQ. Only one packet at time can be requested for TX TS. Signed-off-by: Roger Quadros <rogerq@ti.com> Co-developed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27net: ti: icss-iep: Add IEP driverRoger Quadros
Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to support timestamping of ethernet packets and thus support PTP and PPS for PRU ethernet ports. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: extend pedit add action to handle decrement ipv6 hop limitPieter Jansen van Vuuren
Extend the pedit add actions to handle this case for ipv6. Similar to ipv4 dec ttl, decrementing ipv6 hop limit can be achieved by adding 0xff to the hop limit field. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: introduce pedit add actions on the ipv4 ttl fieldPieter Jansen van Vuuren
Introduce pedit add actions and use it to achieve decrement ttl offload. Decrement ttl can be achieved by adding 0xff to the ttl field. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: add decrement ipv6 hop limit by offloading set hop limit actionsPieter Jansen van Vuuren
Offload pedit set ipv6 hop limit, where the hop limit has already been matched and the new value is one less, by translating it to a decrement. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: add decrement ttl by offloading set ipv4 ttl actionsPieter Jansen van Vuuren
Offload pedit set ipv4 ttl field, where the ttl field has already been matched and the new value is one less, by translating it to a decrement. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: add mac source and destination pedit action offloadPieter Jansen van Vuuren
Introduce the first pedit set offload functionality for the sfc driver. In addition to this, add offload functionality for both mac source and destination pedit set actions. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27sfc: introduce ethernet pedit set action infrastructurePieter Jansen van Vuuren
Introduce the initial ethernet pedit set action infrastructure in preparation for adding mac src and dst pedit action offloads. Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-26parisc: led: Reduce CPU overhead for disk & lan LED computationHelge Deller
Older PA-RISC machines have LEDs which show the disk- and LAN-activity. The computation is done in software and takes quite some time, e.g. on a J6500 this may take up to 60% time of one CPU if the machine is loaded via network traffic. Since most people don't care about the LEDs, start with LEDs disabled and just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on manually via /proc/pdc/led. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2023-08-25Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-24 (igc, e1000e) This series contains updates to igc and e1000e drivers. Vinicius adds support for utilizing multiple PTP registers on igc. Sasha reduces interval time for PTM on igc and adds new device support on e1000e. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000e: Add support for the next LOM generation igc: Decrease PTM short interval from 10 us to 1 us igc: Add support for multiple in-flight TX timestamps ==================== Link: https://lore.kernel.org/r/20230824204418.1551093-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: pass opcode to devcmd_waitShannon Nelson
Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: check for work queue before useShannon Nelson
Add a check that the wq exists before queuing up work for a failed devcmd, as the PF is responsible for health and the VF doesn't have a wq. Fixes: c2dbb0904310 ("pds_core: health timer and workqueue") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: no reset command for VFShannon Nelson
The VF doesn't need to send a reset command, and in a PCI reset scenario it might not have a valid IO space to write to anyway. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: no health reporter in VFShannon Nelson
Make sure the health reporter is set up before we use it in our devlink health updates, especially since the VF doesn't set up the health reporter. Fixes: 25b450c05a49 ("pds_core: add devlink health facilities") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: protect devlink callbacks from fw_down stateShannon Nelson
Don't access structs that have been cleared when in the fw_down state and the various structs have been cleaned and are waiting to recover. This caused a panic on rmmod when already in fw_down and devlink_param_unregister() tried to check the parameters. Fixes: 40ced8944536 ("pds_core: devlink params for enabling VIF support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25sfc: Check firmware supports Ethernet PTP filterAlex Austin
Not all firmware variants support RSS filters. Do not fail all PTP functionality when raw ethernet PTP filters fail to insert. Fixes: e4616f64726b ("sfc: support PTP over Ethernet") Signed-off-by: Alex Austin <alex.austin@amd.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Link: https://lore.kernel.org/r/20230824164657.42379-1-alex.austin@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: convert half-duplex support to positive logicRussell King (Oracle)
Rather than detecting when half-duplex is not supported, and clearing the MAC capabilities, reverse the if() condition and use it to set the capabilities instead. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXn-005pUb-SP@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: move priv->phylink_config.mac_managed_pmRussell King (Oracle)
Move priv->phylink_config.mac_managed_pm to be along side the other phylink initialisations. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXi-005pUV-Nq@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: move xgmac specific phylink caps to dwxgmac2 coreRussell King (Oracle)
Move the xgmac specific phylink capabilities to the dwxgmac2 support core. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXd-005pUP-JL@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: move gmac4 specific phylink capabilities to gmac4Russell King (Oracle)
Move the setup of gmac4 speicifc phylink capabilities into gmac4 code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXY-005pUJ-Ez@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: provide stmmac_mac_phylink_get_caps()Russell King (Oracle)
Allow MACs to provide their own capabilities via the MAC operations struct. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXT-005pUD-Aj@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25net: stmmac: use phylink_limit_mac_speed()Russell King (Oracle)
Use phylink_limit_mac_speed() to limit the MAC capabilities rather than coding this for each speed. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXO-005pU7-61@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 16:04:05 +0000