| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes in UFS, mostly to do with power management"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs
scsi: ufs: qcom: Allow passing platform specific OF data
scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers
scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
|
|
for_each_possible_cpu
The 'np' device_node is initialized via of_cpu_device_node_get(), which
requires explicit calls to of_node_put() when it is no longer required
to avoid leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope. Given that 'np' is only used within the
for_each_possible_cpu(), reduce its scope to release the nood after
every iteration of the loop.
Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241116-cpuidle-riscv-sbi-cleanup-v3-1-a3a46372ce08@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-array fixes
- dm-verity forward error correction fixes
- remove the flag DM_TARGET_PASSES_INTEGRITY from dm-ebs
- dm-thin RCU list fix
* tag 'for-6.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: make get_first_thin use rcu-safe list first function
dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY
dm-verity FEC: Avoid copying RS parity bytes twice.
dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)
dm array: fix cursor index when skipping across block boundaries
dm array: fix unreleased btree blocks on closing a faulty array cursor
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20241216-sysfs-const-bin_attr-zorro-v1-1-220a38d49507@weissschuh.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3ca ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set
config. Upper level driver checks for -ENOTSUPP. Because of the return
code mismatch, the ioctls from userspace fail. Resolve the issue by
passing -ENOTSUPP during unsupported case.
Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep")
Cc: stable@vger.kernel.org
Acked-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm-ebs uses dm-bufio to process requests that are not aligned on logical
sector size. dm-bufio doesn't support passing integrity data (and it is
unclear how should it do it), so we shouldn't set the
DM_TARGET_PASSES_INTEGRITY flag.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: d3c7b35c20d6 ("dm: add emulated block size target")
|
|
The TSM module provides guest identification and attestation when a
guest runs in CCA realm mode. By creating a dummy platform device,
let's ensure the module is automatically loaded. The udev daemon loads
the TSM module after it receives a device addition event. Once that
happens, it can be used earlier in the boot process to decrypt the
rootfs.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241220181236.172060-2-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The mite.c file was originally copied from the COMEDI code, and now that
it is in the kernel tree, along with the comedi code, on some build
configurations there are errors due to duplicate symbols (specifically
mite_dma_disarm).
Remove all of the unused functions in the gpib mite.c and .h files as
they aren't needed and cause the compiler to be confused.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202501081239.BAPhfAHJ-lkp@intel.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/2025010809-padding-survive-91b3@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the USB serial option driver to support Neoway N723-EA.
ID 2949:8700 Marvell Mobile Composite Device Bus
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2949 ProdID=8700 Rev= 1.00
S: Manufacturer=Marvell
S: Product=Mobile Composite Device Bus
S: SerialNumber=200806006809080000
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Tested successfully connecting to the Internet via rndis interface after
dialing via AT commands on If#=4 or If#=6.
Not sure of the purpose of the other serial interface.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
It looks like SRM815 shares ID with SRM825L.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=123456
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/lkml/20241215100027.1970930-1-amadeus@jmu.edu.cn/
Link: https://lore.kernel.org/all/4333b4d0-281f-439d-9944-5570cbc4971d@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Phoenix Contact sells UPS Quint devices [1] with a custom datacable [2]
that embeds a Silicon Labs converter:
Bus 001 Device 003: ID 1b93:1013 Silicon Labs Phoenix Contact UPS Device
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1b93
idProduct 0x1013
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 Phoenix Contact UPS Device
iSerial 3 <redacted>
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0020
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2 Phoenix Contact UPS Device
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
[1] https://www.phoenixcontact.com/en-pc/products/power-supply-unit-quint-ps-1ac-24dc-10-2866763
[2] https://www.phoenixcontact.com/en-il/products/data-cable-preassembled-ifs-usb-datacable-2320500
Reported-by: Giuseppe Corbelli <giuseppe.corbelli@antaresvision.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Since commit 3feb70a61740 ("gpio: loongson: add more gpio chip
support"), the Loongson-2K2000 GPIO is supported.
However, according to the firmware development specification, the
Loongson-2K2000 ACPI GPIO register offsets in the driver do not match
the register base addresses in the firmware, resulting in the registers
not being accessed properly.
Now, we fix it to ensure the GPIO function works properly.
Cc: stable@vger.kernel.org
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250107103856.1037222-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0.
This needs to be reverted since HDCP even after updating the connector
state HDCP property we don't reenable HDCP until the next commit
in which the CP Property is set causing compliance to fail.
--v2
-Fix build issue [Dnyaneshwar]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
(cherry picked from commit fcf73e20cd1fe60c3ba5f9626f1e8f9cd4511edf)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
scsi_execute_cmd() function can return both negative (linux codes) and
positive (scsi_cmnd result field) error codes.
Currently the driver just passes error codes of scsi_execute_cmd() to
hwmon core, which is incorrect because hwmon only checks for negative
error codes. This leads to hwmon reporting uninitialized data to
userspace in case of SCSI errors (for example if the disk drive was
disconnected).
This patch checks scsi_execute_cmd() output and returns -EIO if it's
error code is positive.
Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net
[groeck: Avoid inline variable declaration for portability]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The interrupt handler for bandwidth notifications, pcie_bwnotif_irq(),
dereferences a "data" pointer.
On unbind, that pointer is set to NULL by pcie_bwnotif_remove(). However
the interrupt handler may still be invoked afterwards and will dereference
that NULL pointer.
That's because the interrupt is requested using a devm_*() helper and the
driver core releases devm_*() resources *after* calling ->remove().
pcie_bwnotif_remove() does clear the Link Bandwidth Management Interrupt
Enable and Link Autonomous Bandwidth Interrupt Enable bits in the Link
Control Register, but that won't prevent execution of pcie_bwnotif_irq():
The interrupt for bandwidth notifications may be shared with AER, DPC,
PME, and hotplug. So pcie_bwnotif_irq() may be executed as long as the
interrupt is requested.
There's a similar race on bind: pcie_bwnotif_probe() requests the
interrupt when the "data" pointer still points to NULL. A NULL pointer
deref may thus likewise occur if AER, DPC, PME or hotplug raise an
interrupt in-between the bandwidth controller's call to devm_request_irq()
and assignment of the "data" pointer.
Drop the devm_*() usage and reorder requesting of the interrupt to fix the
issue.
While at it, drop a stray but harmless no_free_ptr() invocation when
assigning the "data" pointer in pcie_bwnotif_probe().
Ilpo points out that the locking on unbind and bind needs to be symmetric,
so move the call to pcie_bwnotif_disable() inside the critical section
protected by pcie_bwctrl_setspeed_rwsem and pcie_bwctrl_lbms_rwsem.
Evert reports a hang on shutdown of an ASUS ROG Strix SCAR 17 G733PYV.
The issue is no longer reproducible with the present commit.
Evert found that attaching a USB-C monitor prevented the hang. The
machine contains an ASMedia USB 3.2 controller below a hotplug-capable
Root Port. So one possible explanation is that the controller gets
hot-removed on shutdown unless something is connected. And the ensuing
hotplug interrupt occurs exactly when the bandwidth controller is
unregistering. The precise cause could not be determined because the
screen had already turned black when the hang occurred.
Link: https://lore.kernel.org/r/ae2b02c9cfbefff475b6e132b0aa962aaccbd7b2.1736162539.git.lukas@wunner.de
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Evert Vorster <evorster@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219629
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Evert Vorster <evorster@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
interface"
There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl'
is uninitialized which makes 'sensor' and '*val' to be stored garbage
value. Revert commit d85ebade02e8 ("eth: fbnic: Add hardware monitoring
support via HWMON interface") to avoid this problem.
Fixes: d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface")
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it.
Add a of_node_put() call when the call is successful.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy
IRQs * 2 override_table entries). Of these 30 calls at max 1 will match
the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system()
check is by far the most expensive check done by acpi_dev_irq_override(),
make this call the last check done by acpi_dev_irq_override() so that it
will be called at max 1 time instead of 30 times.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The TongFang GM5HG0A is a TongFang barebone design which is sold under
various brand names.
The ACPI IRQ override for the keyboard IRQ must be used on these AMD Zen
laptops in order for the IRQ to work.
At least on the SKIKK Vanaheim variant the DMI product- and board-name
strings have been replaced by the OEM with "Vanaheim" so checking that
board-name contains "GM5HG0A" as is usually done for TongFang barebones
quirks does not work.
The DMI OEM strings do contain "GM5HG0A". I have looked at the dmidecode
for a few other TongFang devices and the TongFang code-name string being
in the OEM strings seems to be something which is consistently true.
Add a quirk checking one of the DMI_OEM_STRING(s) is "GM5HG0A" in the hope
that this will work for other OEM versions of the "GM5HG0A" too.
Link: https://www.skikk.eu/en/laptops/vanaheim-15-rtx-4060
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219614
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241228164845.42381-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the Vivobook X1704VAP the X1504VAP has its keyboard IRQ (1) described
as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which
breaks the keyboard.
Add the X1504VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241220181352.25974-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For PMUs with no association, the hisi_pmu->on_cpu is initialized
according to the NUMA locality but use a wrong CPU for the interrupt
affinity. The CPU selected from cpumask_local_spread() can be different
from the CPU by the cpuhp callback. Fix this by setting the IRQ affinity
to hisi_pmu->on_cpu.
Fixes: 6cd137088fdf ("drivers/perf: hisi: Refactor the detection of associated CPUs")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241223125134.57885-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Log after the patch:
[ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Fixes: ab4056126813 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002
ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002
ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002
ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002
ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002
ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002
ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002
ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002
ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002
ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002
ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002
Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.
Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.
Example of previous broken behavior:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
Correct behavior with the fix:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 2147466925,
'phase-adjust-min': -2147466925,
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process.
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: stable <stable@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some scenarios, some multipath software setup places the
REQ_FAILFAST_DEV flag on I/O to prevent retries and immediately
switch to other paths for issuing I/O commands. This will reflect
on the NVMe read and write commands with the limited retry flag.
However, the current NVMe target side does not handle the limited
retry flag, and the target's underlying driver still retries the
I/O. This will result in the I/O not being quickly switched to
other paths, ultimately leading to increased I/O latency.
When the nvme target receive an rw command with limited retry flag,
handle it in block backend by setting the REQ_FAILFAST_DEV flag to
bio.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Now that VirtualBox is able to run as a host on arm64 (e.g. the Apple M3
processors) we can enable VBOXSF_FS (and in turn VBOXGUEST) for this
architecture. Tested with various runs of bonnie++ and dbench on an Apple
MacBook Pro with the latest Virtualbox 7.1.4 r165100 installed.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Link: https://lore.kernel.org/r/7384d96c-2a77-39b0-2306-90129bae9342@nerdbynature.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Macbook 5,1 with MCP79 lost its backlight control since the recent
change for supporting GSP-RM; it rewrote the whole nv50 backlight
control code and each display engine is supposed to have an entry for
IOR bl callback, but it didn't cover mcp77.
This patch adds the missing bl entry initialization for mcp77 display
engine to recover the backlight control.
Fixes: 2274ce7e3681 ("drm/nouveau/disp: add output backlight control methods")
Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223838
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102114944.11499-1-tiwai@suse.de
|
|
Commit 79d2e1919a27 ("staging: gpib: fix Makefiles") uses the corresponding
config symbols to let Makefiles include the driver sources appropriately in
the kernel build.
Unfortunately, the Makefile in the tnt4882 directory refers to the
non-existing config GPIB_TNT4882. The actual config name for this driver is
GPIB_NI_PCI_ISA, as can be observed in the gpib Makefile.
Probably, this is caused by the subtle differences between the config
names, directory names and file names in ./drivers/staging/gpib/, where
often config names and directory names are identical or at least close in
naming, but in this case, it is not.
Change the reference in the tnt4882 Makefile from the non-existing config
GPIB_TNT4882 to the existing config GPIB_NI_PCI_ISA.
Fixes: 79d2e1919a27 ("staging: gpib: fix Makefiles")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250107135032.34424-1-lukas.bulwahn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The error handling for the case `con_index == 0` should involve dropping
the pm usage counter, as ucsi_ccg_sync_control() gets it at the
beginning. Fix it.
Cc: stable <stable@kernel.org>
Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes data corruption when accessing the internal SD card in mass
storage mode.
I am actually not too sure why. I didn't figure a straightforward way to
reproduce the issue, but i seem to get garbage when issuing a lot (over 50)
of large reads (over 120 sectors) are done in a quick succession. That is,
time seems to matter here -- larger reads are fine if they are done with
some delay between them.
But I'm not great at understanding this sort of things, so I'll assume
the issue other, smarter, folks were seeing with similar phones is the
same problem and I'll just put my quirk next to theirs.
The "Software details" screen on the phone is as follows:
V 04.06
07-08-13
RM-849
(c) Nokia
TL;DR version of the device descriptor:
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x06c2
bcdDevice 4.06
iManufacturer 1 Nokia
iProduct 2 Nokia 208
The patch assumes older firmwares are broken too (I'm unable to test, but
no biggie if they aren't I guess), and I have no idea if newer firmware
exists.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should do reverse selection of other components from
CONFIG_USB_F_MIDI2 which is tristate, instead of
CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle
module dependencies.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-5-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
