| Age | Commit message (Collapse) | Author |
|---|
|
The SVM DMA device map direction should be set the same as
the DMA unmap setting, otherwise the DMA core will report
the following warning.
Before finialize this solution, there're some discussion on
the DMA mapping type(stream-based or coherent) in this KFD
migration case, followed by https://lore.kernel.org/all/04d4ab32
-45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/.
As there's no dma_sync_single_for_*() in the DMA buffer accessed
that because this migration operation should be sync properly and
automatically. Give that there's might not be a performance problem
in various cache sync policy of DMA sync. Therefore, in order to
simplify the DMA direction setting alignment, let's set the DMA map
direction as BIDIRECTIONAL.
[ 150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930
[ 150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds
[ 150.834310] wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii
[ 150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G OE 6.10.0-custom #492
[ 150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[ 150.834360] RIP: 0010:check_unmap+0x1cc/0x930
[ 150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50
[ 150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086
[ 150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027
[ 150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680
[ 150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850
[ 150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40
[ 150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b
[ 150.834377] FS: 00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000
[ 150.834379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0
[ 150.834383] Call Trace:
[ 150.834385] <TASK>
[ 150.834387] ? show_regs+0x6d/0x80
[ 150.834393] ? __warn+0x8c/0x140
[ 150.834397] ? check_unmap+0x1cc/0x930
[ 150.834400] ? report_bug+0x193/0x1a0
[ 150.834406] ? handle_bug+0x46/0x80
[ 150.834410] ? exc_invalid_op+0x1d/0x80
[ 150.834413] ? asm_exc_invalid_op+0x1f/0x30
[ 150.834420] ? check_unmap+0x1cc/0x930
[ 150.834425] debug_dma_unmap_page+0x86/0x90
[ 150.834431] ? srso_return_thunk+0x5/0x5f
[ 150.834435] ? rmap_walk+0x28/0x50
[ 150.834438] ? srso_return_thunk+0x5/0x5f
[ 150.834441] ? remove_migration_ptes+0x79/0x80
[ 150.834445] ? srso_return_thunk+0x5/0x5f
[ 150.834448] dma_unmap_page_attrs+0xfa/0x1d0
[ 150.834453] svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu]
[ 150.834710] svm_migrate_ram_to_vram+0x361/0x740 [amdgpu]
[ 150.834914] svm_migrate_to_vram+0xa8/0xe0 [amdgpu]
[ 150.835111] svm_range_set_attr+0xff2/0x1450 [amdgpu]
[ 150.835311] svm_ioctl+0x4a/0x50 [amdgpu]
[ 150.835510] kfd_ioctl_svm+0x54/0x90 [amdgpu]
[ 150.835701] kfd_ioctl+0x3c2/0x530 [amdgpu]
[ 150.835888] ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu]
[ 150.836075] ? srso_return_thunk+0x5/0x5f
[ 150.836080] ? tomoyo_file_ioctl+0x20/0x30
[ 150.836086] __x64_sys_ioctl+0x9c/0xd0
[ 150.836091] x64_sys_call+0x1219/0x20d0
[ 150.836095] do_syscall_64+0x51/0x120
[ 150.836098] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 150.836102] RIP: 0033:0x7faf0f11a94f
[ 150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f
[ 150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003
[ 150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001
[ 150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0
[ 150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000
[ 150.836122] </TASK>
[ 150.836124] ---[ end trace 0000000000000000 ]---
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the default workload type to bootup type on smu v13.0.7.
This is because of the constraint on smu v13.0.7.
Gfx activity has an even higher set point on 3D fullscreen
mode than the one on bootup mode. This causes the 3D fullscreen
mode's performance is worse than the bootup mode's performance
for the lightweighted/medium workload. For the high workload,
the performance is the same between 3D fullscreen mode and bootup
mode.
v2: set the default workload in ASIC specific file
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When starting the mpv player, Radeon R9 users are observing
the below error in dmesg.
[drm:amdgpu_uvd_cs_pass2 [amdgpu]]
*ERROR* msg/fb buffer ff00f7c000-ff00f7e000 out of 256MB segment!
The patch tries to set the TTM_PL_FLAG_CONTIGUOUS for both user
flag(AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS) set and not set cases.
v2: Make the TTM_PL_FLAG_CONTIGUOUS mandatory for user BO's.
v3: revert back to v1, but fix the check instead (chk).
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3599
Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3501
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.10+
|
|
Use second jump table in sriov for live migration or mulitple VF
support so different VF can load different version of MEC as long
as they support sjt
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 274e3f4596446955bf17680fd4eb5489f5ecac00.
Additional review comments to address. Will resubmit.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align the page tracking maximum message size with the device's
capability instead of relying on PAGE_SIZE.
This adjustment resolves a mismatch on systems where PAGE_SIZE is 64K,
but the firmware only supports a maximum message size of 4K.
Now that we rely on the device's capability for max_message_size, we
must account for potential future increases in its value.
Key considerations include:
- Supporting message sizes that exceed a single system page (e.g., an 8K
message on a 4K system).
- Ensuring the RQ size is adjusted to accommodate at least 4
WQEs/messages, in line with the device specification.
The above has been addressed as part of the patch.
Fixes: 79c3cf279926 ("vfio/mlx5: Init QP based resources for dirty tracking")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Yingshun Cui <yicui@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241205122654.235619-1-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
|
|
Pull NVMe fixess from Keith:
"nvme fixes for Linux 6.13
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)"
* tag 'nvme-6.13-2024-12-05' of git://git.infradead.org/nvme:
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
nvme-pci: remove two deallocate zeroes quirks
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.
Cc: Yi Sun <yi.sun@unisoc.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When probe has an error, the current scheme causes a page fault during
resource unwinding. This happens because GTTMMADR_BAR gets unmapped
before the allocated BO is released via drmm. Switching to a managed BO
that is released via devm solves this ordering issue.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204111655.1293-1-ilia.levi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
As per the guidelines, new drivers may not be set to default on.
An expert user can always select it.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Link: https://lore.kernel.org/r/6750c695194cd_2508129427@dwillia2-xfh.jf.intel.com.notmuch
Link: https://lore.kernel.org/r/20241205143634.306114-1-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Use reset_msg_rx_state() in drm_dp_mst_handle_up_req() instead of
open-coding it.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-8-imre.deak@intel.com
|
|
After an out-of-memory error the reception state should be reset, so
that the next attempt receiving a message doesn't fail (due to getting a
start-of-message packet, while the reception state has already the
start-of-message flag set).
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-7-imre.deak@intel.com
|
|
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
|
|
If receiving a reply for an MST down request message times out, the
thread receiving the reply in drm_dp_mst_handle_down_rep() could try to
dereference the drm_dp_sideband_msg_tx txmsg request message after the
thread waiting for the reply - calling drm_dp_mst_wait_tx_reply() - has
timed out and freed txmsg, hence leading to a use-after-free in
drm_dp_mst_handle_down_rep().
Prevent the above by holding the drm_dp_mst_topology_mgr::qlock in
drm_dp_mst_handle_down_rep() for the whole duration txmsg is looked up
from the request list and dereferenced.
v2: Fix unlocking mgr->qlock after verify_rx_request_type() fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203174632.2941402-1-imre.deak@intel.com
|
|
Simplify the error return path in drm_dp_mst_handle_down_rep(),
preparing for the next patch.
While at it use reset_msg_rx_state() instead of open-coding it.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-4-imre.deak@intel.com
|
|
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
|
|
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bbf3 ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
|
|
Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for
partial memory mapping") introduced a new offset, which accounts for
userspace mapping not starting from the beginning of object's scatterlist.
This works fine for cases where first object pte is larger than the new
offset - "r->sgt.curr" counter is set to the offset to match the difference
in the number of total pages. However, if object's first pte's size is
equal to or smaller than the offset, then information about the offset
in userspace is covered up by moving "r->sgt" pointer in remap_sg():
r->sgt.curr += PAGE_SIZE;
if (r->sgt.curr >= r->sgt.max)
r->sgt = __sgt_iter(__sg_next(r->sgt.sgp), use_dma(r->iobase));
This means that two or more pages from virtual memory are counted for
only one page in object's memory, because after moving "r->sgt" pointer
"r->sgt.curr" will be 0.
We should account for this mismatch by moving "r->sgt" pointer to the
next pte. For that we may use "r.sgt.max", which already holds the max
allowed size. This change also eliminates possible confusion, when
looking at i915_scatterlist.h and remap_io_sg() code: former has
scatterlist pointer definition, which differentiates "s.max" value
based on "dma" flag (sg_dma_len() is used only when the flag is
enabled), while latter uses sg_dma_len() indiscriminately.
This patch aims to resolve issue:
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12031
v3:
- instead of checking if r.sgt.curr would exceed allowed max, changed
the value in the while loop to be aligned with `dma` value
v4:
- remove unnecessary parent relation
v5:
- update commit message with explanation about page counting mismatch
and link to the issue
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/upbjdavlbcxku63ns4vstp5kgbn2anxwewpmnppszgb67fn66t@tfclfgkqijue
|
|
Replace sun4i_hdmi_connector_atomic_check(), which performs just TMDS
char rate check, with drm_atomic_helper_connector_hdmi_check(), which
performs additional checks basing on the HDMI Connector's state.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-10-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Replace .mode_valid() callback with .hdmi_tmds_char_rate_valid(). It is
more generic and is used in other mode validation paths. The rate
validation for .mode_valid() will be performed by the
drm_bridge_connector code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-9-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop manual check of the TMDS char rate in the mode_valid callback. This
check is now being performed by the core.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-8-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use new drm_bridge_connector_mode_valid() helper if there is a HDMI
bridge in the bridge chain. This removes the need to perform TMDS char
rate check manually in the bridge driver.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-7-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use new drm_hdmi_connector_mode_valid() helper instead of a
module-specific copy.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-6-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use new drm_hdmi_connector_mode_valid() helper instead of a
module-specific copy.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-5-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add drm_hdmi_connector_mode_valid(), generic helper for HDMI connectors.
It can be either used directly or as a part of the .mode_valid callback.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-4-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The set_connector_edid() function returns a bogus 0, performing the
check on the connector->funcs->fill_modes() result internally. Make the
function pass the fill_modes()'s return value to the caller and move
corresponding checks to the caller site.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-3-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
As pointed out by Maxime, the drm_atomic_helper_connector_hdmi_init()
isn't a good name for a function inside KUnit tests. Rename it to
drm_kunit_helper_connector_hdmi_init().
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-2-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
If the connector->modes list is empty, then list_first_entry() returns a
bogus entry. Change that to use list_first_entry_or_null().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-1-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The devm_clk_get_optional_enabled() function returns error
pointers(PTR_ERR()). So use IS_ERR() to check it.
Verified on K3-J7200 EVM board, without clock node mentioned
in the device tree.
Signed-off-by: Purushothama Siddaiah <psiddaiah@mvista.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://patch.msgid.link/20241205070426.1861048-1-psiddaiah@mvista.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The current requested response version(V1) for MANA_QUERY_GF_STAT query
results in STATISTICS_FLAGS_TX_ERRORS_GDMA_ERROR value being set to
0 always.
In order to get the correct value for this counter we request the response
version to be V2.
Cc: stable@vger.kernel.org
Fixes: e1df5202e879 ("net :mana :Add remaining GDMA stats for MANA to ethtool")
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1733291300-12593-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The ivpu struct drm_driver has conditional initialization based on #ifdef
DRIVER_DATE, which is never defined anywhere. Neither are the macros
referenced within the block: DRIVER_DATE, DRIVER_MAJOR, DRIVER_MINOR,
and DRIVER_PATCHLEVEL. With the struct drm_driver date member going away
anyway, just remove the conditional compilation.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/0e4276552dde66dcdd275740cbc63d232cefd8f4.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_dev_register() already prints the same information on successful
init. Remove the redundant prints.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/900b3836c80a23923ede034ab10eb344be1e35bd.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add kernel-doc for functions to get rid of below warnings
when built with W=1.
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_out_dma_pref'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412031716.JfNIh1Uu-lkp@intel.com/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The NAND chip-selects are registered for the Arasan driver during
initialization but are not de-registered when the driver is unloaded. As a
result, if the driver is loaded again, the chip-selects remain registered
and busy, making them unavailable for use.
Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski ICEYE <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When two chip-selects are configured in the device tree, and the second is
a non-native GPIO, both the GPIO-based chip-select and the first native
chip-select may be asserted simultaneously. This double assertion causes
incorrect read and write operations.
The issue occurs because when nfc->ncs <= 2, nfc->spare_cs is always
initialized to 0 due to static initialization. Consequently, when the
second chip-select (GPIO-based) is selected in anfc_assert_cs(), it is
detected by anfc_is_gpio_cs(), and nfc->native_cs is assigned the value 0.
This results in both the GPIO-based chip-select being asserted and the
NAND controller register receiving 0, erroneously selecting the native
chip-select.
This patch resolves the issue, as confirmed by oscilloscope testing with
configurations involving two or more chip-selects in the device tree.
Fixes: acbd3d0945f9 ("mtd: rawnand: arasan: Leverage additional GPIO CS")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There may be a potential integer overflow issue in inftl_partscan().
parts[0].size is defined as "uint64_t" while mtd->erasesize and
ip->firstUnit are defined as 32-bit unsigned integer. The result of
the calculation will be limited to 32 bits without correct casting.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free.
Fixes: 6d734f1bfc33 ("mtd: rawnand: atmel: Fix possible memory leak")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Change bnxt_re_destroy_qp to always return 0 and don't fail
in case of error during destroy.
In addition, delete debugfs QP to earlier stage.
Fixes: d7d54769c042 ("RDMA/bnxt_re: Add debugfs hook in the driver")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The workaround to modify the UD QP from RTS to RTS is required
only for older adapters. Issuing this for latest adapters can caus
some unexpected behavior. Fix it
Fixes: 1801d87b3598 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Software Queues to hold the WRs needs to be created
for only kernel queues. Avoid allocating the unnecessary
memory for user Queues.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 159fb4ceacd7 ("RDMA/bnxt_re: introduce a function to allocate swq")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Gen P7 supports up to 13 SGEs for now. WQE software structure
can hold only 6 now. Since the max send sge is reported as
13, the stack can give requests up to 13 SGEs. This is causing
traffic failures and system crashes.
Use the define for max SGE supported for variable size. This
will work for both static and variable WQEs.
Fixes: 227f51743b61 ("RDMA/bnxt_re: Fix the max WQE size for static WQE support")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241204075416.478431-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
