summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-15drm/bridge: ite-it6263: Prevent error pointer dereference in probe()Dan Carpenter
If devm_i2c_new_dummy_device() fails then we were supposed to return an error code, but instead the function continues and will crash on the next line. Add the missing return statement. Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
2025-01-14net: fec: handle page_pool_dev_alloc_pages errorKevin Groeneveld
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: xilinx: axienet: Fix IRQ coalescing packet count overflowSean Anderson
If coalesce_count is greater than 255 it will not fit in the register and will overflow. This can be reproduced by running # ethtool -C ethX rx-frames 256 which will result in a timeout of 0us instead. Fix this by checking for invalid values and reporting an error. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14hwmon: (tmp513) Fix division of negative numbersDavid Lechner
Fix several issues with division of negative numbers in the tmp513 driver. The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative value by an unsigned type is undefined behavior. The driver was doing this in several places, i.e. data->shunt_uohms has type of u32. The actual "undefined" behavior is that it converts both values to unsigned before doing the division, for example: int ret = DIV_ROUND_CLOSEST(-100, 3U); results in ret == 1431655732 instead of -33. Furthermore the MILLI macro has a type of unsigned long. Multiplying a signed long by an unsigned long results in an unsigned long. So, we need to cast both MILLI and data data->shunt_uohms to long when using the DIV_ROUND_CLOSEST macro. Fixes: f07f9d2467f4 ("hwmon: (tmp513) Use SI constants from units.h") Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20250114-fix-si-prefix-macro-sign-bugs-v1-1-696fd8d10f00@baylibre.com [groeck: Drop some continuation lines] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-14nfp: bpf: prevent integer overflow in nfp_bpf_event_output()Dan Carpenter
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could potentially have an integer wrapping bug on 32bit systems. Check for this and return an error. Fixes: 9816dd35ecec ("nfp: bpf: perf event output helpers support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/6074805b-e78d-4b8a-bf05-e929b5377c28@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Fix E825 initialization Grzegorz Nitka says: E825 products have incorrect initialization procedure, which may lead to initialization failures and register values. Fix E825 products initialization by adding correct sync delay, checking the PHY revision only for current PHY and adding proper destination device when reading port/quad. In addition, E825 uses PF ID for indexing per PF registers and as a primary PHY lane number, which is incorrect. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add correct PHY lane assignment ice: Fix ETH56G FC-FEC Rx offset value ice: Fix quad registers read on E825 ice: Fix E825 initialization ==================== Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14drm/v3d: Ensure job pointer is set to NULL after job completionMaíra Canal
After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. Fixes: 14d1d1908696 ("drm/v3d: Remove the bad signaled() implementation.") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
2025-01-14drm/xe: Remove unused "mmio_ext" codeMatt Roper
The "mmio_ext" and 'REG_EXT" code is currently unused on any existing platform. Going forward, this also isn't the design we want to use for any future platforms/features either, so we should just go ahead and remove the dead code to avoid confusion. mmio_ext was originally added in an attempt to hack around the early (mis)design of the Xe driver, which used xe_gt as the target for all register MMIO access, even those completely unrelated to the GT subunit of the hardware. With the introduction of commit 34953ee349dd ("drm/xe: Create dedicated xe_mmio structure") and its follow-up patches, that misdesign has been corrected and access to register MMIO regions specific to hardware units is now done through xe_mmio structures which encapsulate an iomap, region size, and some other metadata. Although all of the registers used by the driver today happen to fall within one specific PCI BAR region, and thus re-use a single device-wide iomap, there's no requirement that this stay true for future platforms or features. I.e., if a future platform adds a new 'foo' hardware unit that exists at a different area in the BAR, or even in a completely different BAR, then that would be handled by doing a separate iomap of that unit's register region and wrapping it in its own 'struct xe_mmio foo_regs' structure. The pointer to the new 'foo_regs' could be placed within the xe_device, xe_tile, xe_gt, etc., according to where the new hardware unit falls within the current hardware hierarchy. This effectively reverts the following commits, although parts of these commits had already vanished or changed with the earlier xe_mmio refactor work: - commit 399a13323f0d ("drm/xe: add 28-bit address support in struct xe_reg") - commit fdef72e02e20 ("drm/xe: add a flag to bypass multi-tile config from MTCFG reg") - commit 866b2b176434 ("drm/xe: add MMIO extension support flags") - commit ef29b390c734 ("drm/xe: map MMIO BAR according to the num of tiles in device desc") - commit a4e2f3a299ea ("drm/xe: refactor xe_mmio_probe_tiles to support MMIO extension") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Koby Elbaz <kelbaz@habana.ai> Acked-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106234312.2986065-2-matthew.d.roper@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-14cpufreq: Move endif to the end of Kconfig fileViresh Kumar
It is possible to enable few cpufreq drivers, without the framework being enabled. This happened due to a bug while moving the entries earlier. Fix it. Fixes: 7ee1378736f0 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-14Merge tag 'pci-v6.13-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Prevent bwctrl NULL pointer dereference that caused hangs on shutdown on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner) * tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/bwctrl: Fix NULL pointer deref on unbind and bind
2025-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One iscsi driver fix and one core fix. The core fix is an important one because a retry efficiency update is now causing some USB devices to get the wrong size on discovery (it upset their retry logic for READ_CAPACITY_16)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request scsi: core: Fix command pass through retry regression
2025-01-14drm/vmwgfx: Add new keep_resv BO paramIan Forbes
Adds a new BO param that keeps the reservation locked after creation. This removes the need to re-reserve the BO after creation which is a waste of cycles. This also fixes a bug in vmw_prime_import_sg_table where the imported reservation is unlocked twice. Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Fixes: b32233acceff ("drm/vmwgfx: Fix prime import/export") Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110185335.15301-1-ian.forbes@broadcom.com
2025-01-14drm/vmwgfx: Remove busy_placesIan Forbes
Unused since commit a78a8da51b36 ("drm/ttm: replace busy placement with flags v6") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108201355.2521070-1-ian.forbes@broadcom.com
2025-01-14drm/vmwgfx: Unreserve BO on errorIan Forbes
Unlock BOs in reverse order. Add an acquire context so that lockdep doesn't complain. Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241210195535.2074918-1-ian.forbes@broadcom.com
2025-01-14drm/display: hdmi: Do not read EDID on disconnected connectorsCristian Ciocaltea
The recently introduced hotplug event handler in the HDMI Connector framework attempts to unconditionally read the EDID data, leading to a bunch of non-harmful, yet quite annoying DDC/I2C related errors being reported. Ensure the operation is done only for connectors having the status connected or unknown. Additionally, perform an explicit reset of the connector information when dealing with a disconnected status. Fixes: ab716b74dc9d ("drm/display/hdmi: implement hotplug functions") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-14drm/tests: hdmi: Add connector disablement testLiu Ying
Atomic check should succeed when disabling a connector. Add a test case drm_test_check_disabling_connector() to make sure of this. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-14drm/connector: hdmi: Do atomic check when necessaryLiu Ying
It's ok to pass atomic check successfully if an atomic commit tries to disable the display pipeline which the connector belongs to. That is, when the crtc or the best_encoder pointers in struct drm_connector_state are NULL, drm_atomic_helper_connector_hdmi_check() should return 0. Without the check against the NULL pointers, drm_default_rgb_quant_range() called by drm_atomic_helper_connector_hdmi_check() would dereference the NULL pointer to_match in drm_match_cea_mode(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: drm_default_rgb_quant_range+0x0/0x4c (P) drm_bridge_connector_atomic_check+0x20/0x2c drm_atomic_helper_check_modeset+0x488/0xc78 drm_atomic_helper_check+0x20/0xa4 drm_atomic_check_only+0x4b8/0x984 drm_atomic_commit+0x48/0xc4 drm_framebuffer_remove+0x44c/0x530 drm_mode_rmfb_work_fn+0x7c/0xa0 process_one_work+0x150/0x294 worker_thread+0x2dc/0x3dc kthread+0x130/0x204 ret_from_fork+0x10/0x20 Fixes: 8ec116ff21a9 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges") Fixes: 84e541b1e58e ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()") Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-14drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}Gui Chengming
FW attestation was disabled on MP0_14_0_{2/3}. V2: Move check into is_fw_attestation_support func. (Frank) Remove DRM_WARN log info. (Alex) Fix format. (Christian) Signed-off-by: Gui Chengming <Jack.Gui@amd.com> Reviewed-by: Frank.Min <Frank.Min@amd.com> Reviewed-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 62952a38d9bcf357d5ffc97615c48b12c9cd627c) Cc: stable@vger.kernel.org # 6.12.x
2025-01-14drm/amdgpu: always sync the GFX pipe on ctx switchChristian König
That is needed to enforce isolation between contexts. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit def59436fb0d3ca0f211d14873d0273d69ebb405) Cc: stable@vger.kernel.org
2025-01-14drm/amdgpu: disable gfxoff with the compute workload on gfx12Kenneth Feng
Disable gfxoff with the compute workload on gfx12. This is a workaround for the opencl test failure. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2affe2bbc997b3920045c2c434e480c81a5f9707) Cc: stable@vger.kernel.org # 6.12.x
2025-01-14drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX IsolationSrinivasan Shanmugam
This commit addresses a circular locking dependency issue within the GFX isolation mechanism. The problem was identified by a warning indicating a potential deadlock due to inconsistent lock acquisition order. - The `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` functions previously acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`, leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is called while `enforce_isolation_mutex` is held, and `amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is held, it can create a circular dependency. By ensuring consistent lock usage, this fix resolves the issue: [ 606.297333] ====================================================== [ 606.297343] WARNING: possible circular locking dependency detected [ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE [ 606.297365] ------------------------------------------------------ [ 606.297375] kworker/u96:3/3825 is trying to acquire lock: [ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610 [ 606.297413] but task is already holding lock: [ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.297725] which lock already depends on the new lock. [ 606.297738] the existing dependency chain (in reverse order) is: [ 606.297749] -> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}: [ 606.297765] __mutex_lock+0x85/0x930 [ 606.297776] mutex_lock_nested+0x1b/0x30 [ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.298880] process_one_work+0x21e/0x680 [ 606.298890] worker_thread+0x190/0x350 [ 606.298899] kthread+0xe7/0x120 [ 606.298908] ret_from_fork+0x3c/0x60 [ 606.298919] ret_from_fork_asm+0x1a/0x30 [ 606.298929] -> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}: [ 606.298947] __mutex_lock+0x85/0x930 [ 606.298956] mutex_lock_nested+0x1b/0x30 [ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu] [ 606.299190] process_one_work+0x21e/0x680 [ 606.299199] worker_thread+0x190/0x350 [ 606.299208] kthread+0xe7/0x120 [ 606.299217] ret_from_fork+0x3c/0x60 [ 606.299227] ret_from_fork_asm+0x1a/0x30 [ 606.299236] -> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}: [ 606.299257] __lock_acquire+0x16f9/0x2810 [ 606.299267] lock_acquire+0xd1/0x300 [ 606.299276] __flush_work+0x250/0x610 [ 606.299286] cancel_delayed_work_sync+0x71/0x80 [ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.300369] process_one_work+0x21e/0x680 [ 606.300378] worker_thread+0x190/0x350 [ 606.300387] kthread+0xe7/0x120 [ 606.300396] ret_from_fork+0x3c/0x60 [ 606.300406] ret_from_fork_asm+0x1a/0x30 [ 606.300416] other info that might help us debug this: [ 606.300428] Chain exists of: (work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex [ 606.300458] Possible unsafe locking scenario: [ 606.300468] CPU0 CPU1 [ 606.300476] ---- ---- [ 606.300484] lock(&adev->gfx.kfd_sch_mutex); [ 606.300494] lock(&adev->enforce_isolation_mutex); [ 606.300508] lock(&adev->gfx.kfd_sch_mutex); [ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)); [ 606.300536] *** DEADLOCK *** [ 606.300546] 5 locks held by kworker/u96:3/3825: [ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu] [ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610 [ 606.301083] stack backtrace: [ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19 [ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024 [ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched] [ 606.301140] Call Trace: [ 606.301146] <TASK> [ 606.301154] dump_stack_lvl+0x9b/0xf0 [ 606.301166] dump_stack+0x10/0x20 [ 606.301175] print_circular_bug+0x26c/0x340 [ 606.301187] check_noncircular+0x157/0x170 [ 606.301197] ? register_lock_class+0x48/0x490 [ 606.301213] __lock_acquire+0x16f9/0x2810 [ 606.301230] lock_acquire+0xd1/0x300 [ 606.301239] ? __flush_work+0x232/0x610 [ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301261] ? mark_held_locks+0x54/0x90 [ 606.301274] ? __flush_work+0x232/0x610 [ 606.301284] __flush_work+0x250/0x610 [ 606.301293] ? __flush_work+0x232/0x610 [ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10 [ 606.301318] ? mark_held_locks+0x54/0x90 [ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301345] cancel_delayed_work_sync+0x71/0x80 [ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched] [ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.303388] process_one_work+0x21e/0x680 [ 606.303409] worker_thread+0x190/0x350 [ 606.303424] ? __pfx_worker_thread+0x10/0x10 [ 606.303437] kthread+0xe7/0x120 [ 606.303449] ? __pfx_kthread+0x10/0x10 [ 606.303463] ret_from_fork+0x3c/0x60 [ 606.303476] ? __pfx_kthread+0x10/0x10 [ 606.303489] ret_from_fork_asm+0x1a/0x30 [ 606.303512] </TASK> v2: Refactor lock handling to resolve circular dependency (Alex) - Introduced a `sched_work` flag to defer the call to `amdgpu_gfx_kfd_sch_ctrl` until after releasing `enforce_isolation_mutex`. - This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside the critical section, preventing the circular dependency and deadlock. - The `sched_work` flag is set within the mutex-protected section if conditions are met, and the actual function call is made afterward. - This approach ensures consistent lock acquisition order. Fixes: afefd6f24502 ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0b6b2dd38336d5fd49214f0e4e6495e658e3ab44) Cc: stable@vger.kernel.org
2025-01-14platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev raceChenyuan Yang
The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. Fixes: b2ed33e8d486 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250111180951.2277757-1-chenyuan0y@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-14platform/x86: dell-uart-backlight: fix serdev raceChenyuan Yang
The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250111180118.2274516-1-chenyuan0y@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-14drm/amdgpu/gfx12: Add Cleaner Shader Support for GFX12.0 GPUsSrinivasan Shanmugam
This commit enables the cleaner shader feature for GFX12.0 and GFX12.0.1 GPUs. The cleaner shader is important for clearing GPU resources such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs) between workloads. - This feature ensures that GPU resources are reset between workloads, preventing data leaks and ensuring accurate computation. By enabling the cleaner shader, this update enhances the security and reliability of GPU operations on GFX12.0 hardware. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: Mark debug KFD module params as unsafeKent Russell
Mark options only meant to be used for debugging as unsafe so that the kernel is tainted when they are used. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}Gui Chengming
FW attestation was disabled on MP0_14_0_{2/3}. V2: Move check into is_fw_attestation_support func. (Frank) Remove DRM_WARN log info. (Alex) Fix format. (Christian) Signed-off-by: Gui Chengming <Jack.Gui@amd.com> Reviewed-by: Frank.Min <Frank.Min@amd.com> Reviewed-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: always sync the GFX pipe on ctx switchChristian König
That is needed to enforce isolation between contexts. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: mark a bunch of module parameters unsafeChristian König
We sometimes have people trying to use debugging options in production environments. Mark options only meant to be used for debugging as unsafe so that the kernel is tainted when they are used. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: Use DRM scheduler API in amdgpu_xcp_release_schedTvrtko Ursulin
Lets use the existing helper instead of peeking into the structure directly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: disable gfxoff with the compute workload on gfx12Kenneth Feng
Disable gfxoff with the compute workload on gfx12. This is a workaround for the opencl test failure. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX IsolationSrinivasan Shanmugam
This commit addresses a circular locking dependency issue within the GFX isolation mechanism. The problem was identified by a warning indicating a potential deadlock due to inconsistent lock acquisition order. - The `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` functions previously acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`, leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is called while `enforce_isolation_mutex` is held, and `amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is held, it can create a circular dependency. By ensuring consistent lock usage, this fix resolves the issue: [ 606.297333] ====================================================== [ 606.297343] WARNING: possible circular locking dependency detected [ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE [ 606.297365] ------------------------------------------------------ [ 606.297375] kworker/u96:3/3825 is trying to acquire lock: [ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610 [ 606.297413] but task is already holding lock: [ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.297725] which lock already depends on the new lock. [ 606.297738] the existing dependency chain (in reverse order) is: [ 606.297749] -> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}: [ 606.297765] __mutex_lock+0x85/0x930 [ 606.297776] mutex_lock_nested+0x1b/0x30 [ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.298880] process_one_work+0x21e/0x680 [ 606.298890] worker_thread+0x190/0x350 [ 606.298899] kthread+0xe7/0x120 [ 606.298908] ret_from_fork+0x3c/0x60 [ 606.298919] ret_from_fork_asm+0x1a/0x30 [ 606.298929] -> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}: [ 606.298947] __mutex_lock+0x85/0x930 [ 606.298956] mutex_lock_nested+0x1b/0x30 [ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu] [ 606.299190] process_one_work+0x21e/0x680 [ 606.299199] worker_thread+0x190/0x350 [ 606.299208] kthread+0xe7/0x120 [ 606.299217] ret_from_fork+0x3c/0x60 [ 606.299227] ret_from_fork_asm+0x1a/0x30 [ 606.299236] -> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}: [ 606.299257] __lock_acquire+0x16f9/0x2810 [ 606.299267] lock_acquire+0xd1/0x300 [ 606.299276] __flush_work+0x250/0x610 [ 606.299286] cancel_delayed_work_sync+0x71/0x80 [ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.300369] process_one_work+0x21e/0x680 [ 606.300378] worker_thread+0x190/0x350 [ 606.300387] kthread+0xe7/0x120 [ 606.300396] ret_from_fork+0x3c/0x60 [ 606.300406] ret_from_fork_asm+0x1a/0x30 [ 606.300416] other info that might help us debug this: [ 606.300428] Chain exists of: (work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex [ 606.300458] Possible unsafe locking scenario: [ 606.300468] CPU0 CPU1 [ 606.300476] ---- ---- [ 606.300484] lock(&adev->gfx.kfd_sch_mutex); [ 606.300494] lock(&adev->enforce_isolation_mutex); [ 606.300508] lock(&adev->gfx.kfd_sch_mutex); [ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)); [ 606.300536] *** DEADLOCK *** [ 606.300546] 5 locks held by kworker/u96:3/3825: [ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu] [ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610 [ 606.301083] stack backtrace: [ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19 [ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024 [ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched] [ 606.301140] Call Trace: [ 606.301146] <TASK> [ 606.301154] dump_stack_lvl+0x9b/0xf0 [ 606.301166] dump_stack+0x10/0x20 [ 606.301175] print_circular_bug+0x26c/0x340 [ 606.301187] check_noncircular+0x157/0x170 [ 606.301197] ? register_lock_class+0x48/0x490 [ 606.301213] __lock_acquire+0x16f9/0x2810 [ 606.301230] lock_acquire+0xd1/0x300 [ 606.301239] ? __flush_work+0x232/0x610 [ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301261] ? mark_held_locks+0x54/0x90 [ 606.301274] ? __flush_work+0x232/0x610 [ 606.301284] __flush_work+0x250/0x610 [ 606.301293] ? __flush_work+0x232/0x610 [ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10 [ 606.301318] ? mark_held_locks+0x54/0x90 [ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301345] cancel_delayed_work_sync+0x71/0x80 [ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched] [ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.303388] process_one_work+0x21e/0x680 [ 606.303409] worker_thread+0x190/0x350 [ 606.303424] ? __pfx_worker_thread+0x10/0x10 [ 606.303437] kthread+0xe7/0x120 [ 606.303449] ? __pfx_kthread+0x10/0x10 [ 606.303463] ret_from_fork+0x3c/0x60 [ 606.303476] ? __pfx_kthread+0x10/0x10 [ 606.303489] ret_from_fork_asm+0x1a/0x30 [ 606.303512] </TASK> v2: Refactor lock handling to resolve circular dependency (Alex) - Introduced a `sched_work` flag to defer the call to `amdgpu_gfx_kfd_sch_ctrl` until after releasing `enforce_isolation_mutex`. - This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside the critical section, preventing the circular dependency and deadlock. - The `sched_work` flag is set within the mutex-protected section if conditions are met, and the actual function call is made afterward. - This approach ensures consistent lock acquisition order. Fixes: afefd6f24502 ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-14drm/xe: Add locks in gtidle codeVinay Belgaumkar
The update of the residency values needs to be protected by a lock to avoid multiple entrypoints, for example when multiple userspace clients read the sysfs file. Other in-kernel clients are going to be added to sample these values, making the problem worse. Protect those updates with a raw_spinlock so it can be called by future integration with perf pmu. Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110173308.2412232-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-01-14gpio: xilinx: Convert gpio_lock to raw spinlockSean Anderson
irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7caea292 ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250110163354.2012654-1-sean.anderson@linux.dev Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-14pfcp: Destroy device along with udp socket's netns dismantle.Kuniyuki Iwashima
pfcp_newlink() links the device to a list in dev_net(dev) instead of net, where a udp tunnel socket is created. Even when net is removed, the device stays alive on dev_net(dev). Then, removing net triggers the splat below. [0] In this example, pfcp0 is created in ns2, but the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name pfcp0 type pfcp ip netns del ns1 Let's link the device to the socket's netns instead. Now, pfcp_net_exit() needs another netdev iteration to remove all pfcp devices in the netns. pfcp_dev_list is not used under RCU, so the list API is converted to the non-RCU variant. pfcp_net_exit() can be converted to .exit_batch_rtnl() in net-next. [0]: ref_tracker: net notrefcnt@00000000128b34dc has 1/1 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) pfcp_create_sock (drivers/net/pfcp.c:168) pfcp_newlink (drivers/net/pfcp.c:182 drivers/net/pfcp.c:197) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) WARNING: CPU: 1 PID: 11 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000007f3fb60 EFLAGS: 00010286 RAX: 00000000000020ef RBX: ff1100000d6481e0 RCX: 1ffffffff0e40d82 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000d648230 R08: 0000000000000001 R09: fffffbfff0e395af R10: 0000000000000001 R11: 0000000000000000 R12: ff1100000d648230 R13: dead000000000100 R14: ff1100000d648230 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005620e1363990 CR3: 000000000eeb2002 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Fixes: 76c8764ef36a ("pfcp: add PFCP module") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/20250104125732.17335-1-shaw.leon@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14gtp: Destroy device along with udp socket's netns dismantle.Kuniyuki Iwashima
gtp_newlink() links the device to a list in dev_net(dev) instead of src_net, where a udp tunnel socket is created. Even when src_net is removed, the device stays alive on dev_net(dev). Then, removing src_net triggers the splat below. [0] In this example, gtp0 is created in ns2, and the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name gtp0 type gtp role sgsn ip netns del ns1 Let's link the device to the socket's netns instead. Now, gtp_net_exit_batch_rtnl() needs another netdev iteration to remove all gtp devices in the netns. [0]: ref_tracker: net notrefcnt@000000003d6e7d05 has 1/2 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) gtp_create_sock (./include/net/udp_tunnel.h:59 drivers/net/gtp.c:1423) gtp_create_sockets (drivers/net/gtp.c:1447) gtp_newlink (drivers/net/gtp.c:1507) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) WARNING: CPU: 1 PID: 60 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:2 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000009a07b60 EFLAGS: 00010286 RAX: 0000000000002bd3 RBX: ff1100000f4e1aa0 RCX: 1ffffffff0e40ac6 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000f4e1af0 R08: 0000000000000001 R09: fffffbfff0e395ae R10: 0000000000000001 R11: 0000000000036001 R12: ff1100000f4e1af0 R13: dead000000000100 R14: ff1100000f4e1af0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9b2464bd98 CR3: 0000000005286005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/20250104125732.17335-1-shaw.leon@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().Kuniyuki Iwashima
gtp_newlink() links the gtp device to a list in dev_net(dev). However, even after the gtp device is moved to another netns, it stays on the list but should be invisible. Let's use for_each_netdev_rcu() for netdev traversal in gtp_genl_dump_pdp(). Note that gtp_dev_list is no longer used under RCU, so list helpers are converted to the non-RCU variant. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/CABAhCOQdBL6h9M2C+kd+bGivRJ9Q72JUxW+-gur0nub_=PmFPA@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14drm/i915/fb: Relax clear color alignment to 64 bytesVille Syrjälä
Mesa changed its clear color alignment from 4k to 64 bytes without informing the kernel side about the change. This is now likely to cause framebuffer creation to fail. The only thing we do with the clear color buffer in i915 is: 1. map a single page 2. read out bytes 16-23 from said page 3. unmap the page So the only requirement we really have is that those 8 bytes are all contained within one page. Thus we can deal with the Mesa regression by reducing the alignment requiment from 4k to the same 64 bytes in the kernel. We could even go as low as 32 bytes, but IIRC 64 bytes is the hardware requirement on the 3D engine side so matching that seems sensible. Note that the Mesa alignment chages were partially undone so the regression itself was already fixed on userspace side. Cc: stable@vger.kernel.org Cc: Sagar Ghuge <sagar.ghuge@intel.com> Cc: Nanley Chery <nanley.g.chery@intel.com> Reported-by: Xi Ruoyao <xry111@xry111.site> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057 Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/ Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com Tested-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2025-01-13r8169: remove redundant hwmon supportHeiner Kallweit
The temperature sensor is actually part of the integrated PHY and available also on the standalone versions of the PHY. Therefore hwmon support will be added to the Realtek PHY driver and can be removed here. Fixes: 1ffcc8d41306 ("r8169: add support for the temperature sensor being available from RTL8125B") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/afba85f5-987b-4449-83cc-350438af7fe7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-13drm/xe/oa: Add missing VISACTL mux registersAshutosh Dixit
Add missing VISACTL mux registers required for some OA config's (e.g. RenderPipeCtrl). Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops") Cc: stable@vger.kernel.org Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250111021539.2920346-1-ashutosh.dixit@intel.com
2025-01-13ACPI: video: Fix random crashes due to bad kfree()Chris Bainbridge
Commit c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") added function dm_helpers_probe_acpi_edid(), which fetches the EDID from the BIOS by calling acpi_video_get_edid(). acpi_video_get_edid() returns a pointer to the EDID, but this pointer does not originate from kmalloc() - it is actually the internal "pointer" field from an acpi_buffer struct (which did come from kmalloc()). dm_helpers_probe_acpi_edid() then attempts to kfree() the EDID pointer, resulting in memory corruption which leads to random, intermittent crashes (e.g. 4% of boots will fail with some Oops). Fix this by allocating a new array (which can be safely freed) for the EDID data, and correctly freeing the acpi_buffer pointer. The only other caller of acpi_video_get_edid() is nouveau_acpi_edid(): remove the extraneous kmemdup() here as the EDID data is now copied in acpi_video_device_EDID(). Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Closes: https://lore.kernel.org/amd-gfx/20250110175252.GBZ4FedNKqmBRaY4T3@fat_crate.local/T/#m324a23eb4c4c32fa7e89e31f8ba96c781e496fb1 Link: https://patch.msgid.link/Z4K_oQL7eA9Owkbs@debian.local [ rjw: Changed function description comment into a kerneldoc one ] [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-13cpuidle: teo: Update documentation after previous changesRafael J. Wysocki
After previous changes, the description of the teo governor in the documentation comment does not match the code any more, so update it as appropriate. Fixes: 449914398083 ("cpuidle: teo: Remove recent intercepts metric") Fixes: 2662342079f5 ("cpuidle: teo: Gather statistics regarding whether or not to stop the tick") Fixes: 6da8f9ba5a87 ("cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/6120335.lOV4Wx5bFT@rjwysocki.net [ rjw: Corrected 3 typos found by Christian ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-13drm/amd/display: Disable replay and psr while VRR is enabledTom Chung
[Why] Replay and PSR will cause some video corruption while VRR is enabled. [How] 1. Disable the Replay and PSR while VRR is enabled. 2. Change the amdgpu_dm_crtc_vrr_active() parameter to const. Because the function will only read data from dm_crtc_state. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d7879340e987b3056b8ae39db255b6c19c170a0d) Cc: stable@vger.kernel.org
2025-01-13drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enableTom Chung
[Why] The enum DC_PSR_VERSION_SU_1 of psr_version is 1 and DC_PSR_VERSION_UNSUPPORTED is 0xFFFFFFFF. The original code may has chance trigger the amdgpu_dm_psr_enable() while psr version is set to DC_PSR_VERSION_UNSUPPORTED. [How] Modify the condition to psr->psr_version == DC_PSR_VERSION_SU_1 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f765e7ce0417f8dc38479b4b495047c397c16902) Cc: stable@vger.kernel.org
2025-01-13ice: Add correct PHY lane assignmentKarol Kolacinski
Driver always naively assumes, that for PTP purposes, PHY lane to configure is corresponding to PF ID. This is not true for some port configurations, e.g.: - 2x50G per quad, where lanes used are 0 and 2 on each quad, but PF IDs are 0 and 1 - 100G per quad on 2 quads, where lanes used are 0 and 4, but PF IDs are 0 and 1 Use correct PHY lane assignment by getting and parsing port options. This is read from the NVM by the FW and provided to the driver with the indication of active port split. Remove ice_is_muxed_topo(), which is no longer needed. Fixes: 4409ea1726cb ("ice: Adjust PTP init for 2x50G E825C devices") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix ETH56G FC-FEC Rx offset valueKarol Kolacinski
Fix ETH56G FC-FEC incorrect Rx offset value by changing it from -255.96 to -469.26 ns. Those values are derived from HW spec and reflect internal delays. Hex value is a fixed point representation in Q23.9 format. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix quad registers read on E825Karol Kolacinski
Quad registers are read/written incorrectly. E825 devices always use quad 0 address and differentiate between the PHYs by changing SBQ destination device (phy_0 or phy_0_peer). Add helpers for reading/writing PTP registers shared per quad and use correct quad address and SBQ destination device based on port. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix E825 initializationKarol Kolacinski
Current implementation checks revision of all PHYs on all PFs, which is incorrect and may result in initialization failure. Check only the revision of the current PHY. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13Merge tag 'mm-hotfixes-stable-2025-01-13-00-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM. All patches are singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fs/proc: fix softlockup in __read_vmcore (part 2) mm: fix assertion in folio_end_read() mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled. vmstat: disable vmstat_work on vmstat_cpu_down_prep() zram: fix potential UAF of zram table selftests/mm: set allocated memory to non-zero content in cow test mm: clear uffd-wp PTE/PMD state on mremap() module: fix writing of livepatch relocations in ROX text mm: zswap: properly synchronize freeing resources during CPU hotunplug Revert "mm: zswap: fix race between [de]compression and CPU hotunplug" hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode mm: fix div by zero in bdi_ratio_from_pages x86/execmem: fix ROX cache usage in Xen PV guests filemap: avoid truncating 64-bit offset to 32 bits tools: fix atomic_set() definition to set the value correctly mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit" scripts/decode_stacktrace.sh: fix decoding of lines with an additional info mm/kmemleak: fix percpu memory leak detection failure
2025-01-13nouveau/fence: handle cross device fences properlyDave Airlie
The fence sync logic doesn't handle a fence sync across devices as it tries to write to a channel offset from one device into the fence bo from a different device, which won't work so well. This patch fixes that to avoid using the sync path in the case where the fences come from different nouveau drm devices. This works fine on a single device as the fence bo is shared across the devices, and mapped into each channels vma space, the channel offsets are therefore okay to pass between sides, so one channel can sync on the seqnos from the other by using the offset into it's vma. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Ben Skeggs <bskeggs@nvidia.com> [ Fix compilation issue; remove version log from commit messsage. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250109005553.623947-1-airlied@gmail.com
2025-01-13drm/xe/ptl: Apply Wa_14023061436Nirmoy Das
Enable WMTP for the BTD kernel to address Wa14023061436 by setting the proper TDL Chicken Bit. v2: Apply it on engine_was[] as this register is not part of LRC(Matt) Apply it for first_render_or_compute in case this gets extended to compute only platforms(Matt). Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108141323.311601-1-nirmoy.das@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 23:55:03 +0000