| Age | Commit message (Collapse) | Author |
|---|
|
If ccs_mode is being modified via
/sys/class/drm/cardX/device/tileY/gtY/ccs_mode
the asynchronous reset is triggered and the write returns immediately.
With that some test receive false information about number of CCS engines
or even fail if they proceed without delay after changing the ccs_mode.
Changing the ccs_mode change from async to sync to prevent failures in
tests.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-3-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Add synchronous version gt reset as there are few places where it
is expected.
Also add a wait helper to wait until gt reset is done.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-2-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Extend HDMI connector output format tests to verify its registration
succeeds only when the presence of YUV420 in the supported formats
matches the state of ycbcr_420_allowed flag.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-4-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Ensure HDMI connector initialization fails when the presence of
HDMI_COLORSPACE_YUV420 in the given supported_formats bitmask doesn't
match the value of drm_connector->ycbcr_420_allowed.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-3-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The case of having an HDMI bridge in the pipeline which advertises
YUV420 capability via its ->supported_formats and a non-HDMI one that
didn't enable ->ycbcr_420_allowed, is incorrectly handled because
supported_formats is passed as is to the helper initializing the HDMI
connector.
Ensure HDMI_COLORSPACE_YUV420 is removed from the bitmask passed to
drmm_connector_hdmi_init() when connector's ->ycbcr_420_allowed flag
ends up not being set.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-2-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bridges having DRM_BRIDGE_OP_HDMI set in their ->ops are supposed to
rely on the ->supported_formats bitmask to advertise the permitted
colorspaces, including HDMI_COLORSPACE_YUV420.
However, a new flag ->ycbcr_420_allowed has been recently introduced,
which brings the necessity to require redundant and potentially
inconsistent information to be provided on HDMI bridges initialization.
Adjust ->ycbcr_420_allowed for HDMI bridges according to
->supported_formats, right before adding them to the global bridge list.
This keeps the initialization process straightforward and unambiguous,
thereby preventing any further confusion.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-1-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
If zram_meta_alloc failed early, it frees allocated zram->table without
setting it NULL. Which will potentially cause zram_meta_free to access
the table if user reset an failed and uninitialized device.
Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com
Fixes: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.14-2025-01-10:
amdgpu:
- Fix max surface handling in DC
- clang fixes
- DCN 3.5 fixes
- DCN 4.0.1 fixes
- DC CRC fixes
- DML updates
- DSC fixes
- PSR fixes
- DC add some divide by 0 checks
- SMU13 updates
- SR-IOV fixes
- RAS fixes
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
_ Fix RB bitmap setup
- Fix doorbell ttm cleanup
- Add CEC notifier support
- DPIA updates
- MST fixes
amdkfd:
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110172731.2960668-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- SRIOV VF: Avoid reading inaccessible registers (Jakub, Marcin)
- Introduce RPa frequency information (Rodrigo)
- Remove unnecessary force wakes on SLPC code (Vinay)
- Fix all typos in xe (Nitin)
- Adding steering info support for GuC register lists (Jesus)
- Remove unused xe_pciids.h harder, add missing PCI ID (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4E0tlTAA6MZ7PF2@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are some small driver core and debugfs fixes that resolve some
reported problems:
- debugfs runtime error reporting fixes
- topology cpumask race-condition fix
- MAINTAINERS file email update
All of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
fs: debugfs: fix open proxy for unsafe files
MAINTAINERS: align Danilo's maintainer entries
topology: Keep the cpumask unchanged when printing cpumap
debugfs: fix missing mutex_destroy() in short_fops case
fs: debugfs: differentiate short fops with proxy ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes that resolve some reported
issues and have been in my tree for too long due to the holiday break.
They resolve the following issues:
- lots of gpib build-time fixes as reported by testers and 0-day
- gpib logical fixes
- mailmap fix
All of these have been in linux-next for a while, with no reported
issues other than the duplicated change"
* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: mite: remove unused global functions
staging: gpib: refer to correct config symbol in tnt4882 Makefile
mailmap: update Bingwu Zhang's email address
staging: gpib: fix address space mixup
staging: gpib: use ioport_map
staging: gpib: fix pcmcia dependencies
staging: gpib: add module author and description fields
staging: gpib: fix Makefiles
staging: gpib: make global 'usec_diff' functions static
staging: gpib: Modify mismatched function name
staging: gpib: Add lower bound check for secondary address
staging: gpib: Fix erroneous removal of blank before newline
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- More robust engine resets on Haswell and older (Nitin)
- Dead code removal (David)
- Selftest, logging and tracing improvements (Sk, Nitin, Sebastian,
Apoorva)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4DidoEACFu7D6iG@jlahtine-mobl.ger.corp.intel.com
|
|
The recently added WARN() for deprecated #address-cells and #size-cells
triggered a WARN when of_platform_populate() (which calls
of_address_to_resource()) is used on nodes with non-translatable
addresses. This case is expected to return an error.
Rework the bus matching to allow no match and make the default require
an #address-cells property. That should be safe to do as any platform
missing #address-cells would have a warning already.
Fixes: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20250110215030.3637845-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
non-translatable address
of_address_to_resource() on a non-translatable address should return an
error. Additionally, this case also triggers a spurious WARN for
missing #address-cells/#size-cells.
Link: https://lore.kernel.org/r/20250110215030.3637845-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes tree. They resolve some
reported issues:
- stm32 break control fix
- 8250 runtime pm usage counter fix
- imx driver locking fix
All have been in my tree and linux-next for three weeks now, with no
reported issues"
* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: use port lock wrappers for break control
serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
tty: serial: 8250: Fix another runtime PM usage counter underflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.13-rc7.
Included in here are:
- usb serial new device ids
- typec bugfixes for reported issues
- dwc3 driver fixes
- chipidea driver fixes
- gadget driver fixes
- other minor fixes for reported problems.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
usb-storage: Add max sectors quirk for Nokia 208
usb: gadget: midi2: Reverse-select at the right place
usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
USB: core: Disable LPM only for non-suspended ports
usb: fix reference leak in usb_new_device()
usb: typec: tcpci: fix NULL pointer issue on shared irq case
usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
usb: typec: ucsi: Set orientation as none when connector is unplugged
usb: gadget: configfs: Ignore trailing LF for user strings to cdev
USB: usblp: return error when setting unsupported protocol
usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
usb: dwc3-am62: Disable autosuspend during remove
usb: dwc3: gadget: fix writing NYET threshold
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to fix error handling in drivetemp driver"
* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
|
|
When tx_max_frame_size was added to struct ravb_hw_info, no value was
set in ravb_rzv2m_hw_info so the default value of zero was used.
The maximum MTU is set by subtracting from tx_max_frame_size to allow
space for headers and frame checksums. As ndev->max_mtu is unsigned,
this subtraction wraps around leading to a ridiculously large positive
value that is obviously incorrect.
Before tx_max_frame_size was introduced, the maximum MTU was based on
rx_max_frame_size. So, we can restore the correct maximum MTU by copying
the rx_max_frame_size value into tx_max_frame_size for RZ/V2M.
Fixes: 1d63864299ca ("net: ravb: Fix maximum TX frame size for GbEth devices")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20250109113706.1409149-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's
children (which happens later in the pci_unregister_driver()).
Due to this, when mana driver is configured as a module and rmmod is
invoked, following stack gets printed along with failure in rmmod command.
[ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 2399.318657] #PF: supervisor write access in kernel mode
[ 2399.319057] #PF: error_code(0x0002) - not-present page
[ 2399.319528] PGD 10eb68067 P4D 0
[ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI
[ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ #89
[ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
[ 2399.321892] RIP: 0010:down_write+0x1a/0x50
[ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c
[ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246
[ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000
[ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000
[ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098
[ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098
[ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000
[ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0
[ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 2399.329055] Call Trace:
[ 2399.329243] <TASK>
[ 2399.329379] ? show_regs+0x69/0x80
[ 2399.329602] ? __die+0x25/0x70
[ 2399.329856] ? page_fault_oops+0x271/0x550
[ 2399.330088] ? psi_group_change+0x217/0x470
[ 2399.330341] ? do_user_addr_fault+0x455/0x7b0
[ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0
[ 2399.331004] ? exc_page_fault+0x73/0x160
[ 2399.331275] ? asm_exc_page_fault+0x27/0x30
[ 2399.343324] ? down_write+0x1a/0x50
[ 2399.343631] simple_recursive_removal+0x4d/0x2c0
[ 2399.343977] ? __pfx_remove_one+0x10/0x10
[ 2399.344251] debugfs_remove+0x45/0x70
[ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana]
[ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana]
[ 2399.345229] mana_detach+0x2f1/0x4e0 [mana]
[ 2399.345466] ? ida_free+0x150/0x160
[ 2399.345718] ? __cond_resched+0x1a/0x50
[ 2399.345987] mana_remove+0xf4/0x1a0 [mana]
[ 2399.346243] mana_gd_remove+0x25/0x80 [mana]
[ 2399.346605] pci_device_remove+0x41/0xb0
[ 2399.346878] device_remove+0x46/0x70
[ 2399.347150] device_release_driver_internal+0x1e3/0x250
[ 2399.347831] ? klist_remove+0x81/0xe0
[ 2399.348377] driver_detach+0x4b/0xa0
[ 2399.348906] bus_remove_driver+0x83/0x100
[ 2399.349435] driver_unregister+0x31/0x60
[ 2399.349919] pci_unregister_driver+0x40/0x90
[ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana]
[ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320
[ 2399.351664] ? __fput+0x1a9/0x2d0
[ 2399.352200] __x64_sys_delete_module+0x12/0x20
[ 2399.352760] x64_sys_call+0x1e66/0x2140
[ 2399.353316] do_syscall_64+0x79/0x150
[ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230
[ 2399.354346] ? do_syscall_64+0x85/0x150
[ 2399.354816] ? irqentry_exit+0x1d/0x30
[ 2399.355287] ? exc_page_fault+0x7f/0x160
[ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2399.356302] RIP: 0033:0x7fe728d26aeb
[ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48
[ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb
[ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8
[ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950
[ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760
[ 2399.362688] </TASK>
Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device")
Cc: stable@vger.kernel.org
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1736398991-764-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues.
Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.")
Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix an OF node leak in the code parsing thermal zone DT properties
(Joe Hattori)"
* tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix OF node leak in of_thermal_zone_find()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add two more ACPI IRQ override quirks and update the code using them
to avoid unnecessary overhead (Hans de Goede)"
* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: acpi_dev_irq_override(): Check DMI match last
ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
DMEM cgroup pull request
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a handful of selftest fixes
- fix a memory leak in relocation processing during module loading
- avoid sleeping in die()
- fix kprobe instruction slot address calculations
- fix DT node reference leak in SBI idle probing
- avoid initializing out of bounds pages on sparse vmemmap systems with
a gap at the start of their physical memory map
- fix backtracing through exceptions
- _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y
- local labels in entry.S are now marked with ".L", which prevents them
from trashing backtraces
- a handful of fixes for SBI-based performance counters
* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
riscv: use local label names instead of global ones in assembly
riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
riscv: stacktrace: fix backtracing through exceptions
riscv: mm: Fix the out of bound issue of vmemmap address
cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
riscv: kprobes: Fix incorrect address calculation
riscv: Fix sleeping in invalid context in die()
riscv: module: remove relocation_head rel_entry member allocation
riscv: selftests: Fix warnings pointer masking test
|
|
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)
|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
|
|
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5860c88cdfe7300d08c1aef881bba0cac369e34)
|
|
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4caacd1671b7a013ad04cd8b6398f002540bdd4d)
Cc: stable@vger.kernel.org
|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa6713fa2046f4c09bf3013dd1420ae15603ca6f)
Cc: stable@vger.kernel.org
|
|
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7ccfc0d4241a834c25a9a9e1e78b388b4445d23)
Cc: stable@vger.kernel.org
|
|
[Why]
Observed frame rate get dropped by tool like glxgear. Even though the
output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower.
It's due to code path in some cases will trigger
dm_dp_mst_is_port_support_mode() to read out remote Link status to
assess the available bandwidth for dsc maniplation. Overhead of keep
reading remote DPCD is considerable.
[How]
Store the remote link BW in mst_local_bw and use end-to-end full_pbn
as an indicator to decide whether update the remote link bw or not.
Whenever we need the info to assess the BW, visit the stored one first.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a9a918545455a5979c6232fcf61ed3d8f0db3ae)
Cc: stable@vger.kernel.org
|
|
[Why & How]
Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode
under dsc decoding at the last DP link config, we only validate the
case when there is an UFP. However, if the MSTB LCT=1, there is no
UFP.
Under this case, use root_link_bw_in_kbps as the available bw to
compare.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a04d9534a8a75b2806c5321c387be450c364b55e)
Cc: stable@vger.kernel.org
|
|
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d477e39532d725b1cdb3c8005c689c74ffbf3b94)
Cc: stable@vger.kernel.org # 6.12.x
|
|
This version brings along following fixes:
- Add some feature for secure display
- Add replay desync error count tracking and reset
- Update chip_cap defines and usage
- Remove unnecessary eDP power down
- Fix some stuttering/corruption issue on PSR panel
- Cleanup and refactoring DML2.1
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
this is to init to HW real DTBCLK.
and use real HW DTBCLK status to update internal logic state
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is
because the outbox interrupt mechanism can not handle HPD
immediately and require some improvement.
[HOW]
1. not enable link if hpd_pending is true.
2. abort pre-train if training failed and hpd_pending is true.
3. check if 2 lane supported when it is alt mode
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add several DML21 fixes
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Revised Replay Full screen video Pseudo vblank control.
Reviewed-by: Allen Li <allen.li@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add a new flag in replay_config to indicate the replay
low hz status.
Reviewed-by: Allen Li <allen.li@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The functions read_ono_state are no longer in use and have been identified
as redundant.
Removing them helps streamline the codebase and improve maintainability by
eliminating unnecessary code.
[How]
These unused functions were removed from Hwss module, ensuring that no
functionality is affected, and the code is simplified.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
BIOS table will not always contain accurate UMC channel info when
harvesting is enabled, so get the correct info from SMU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
