summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-09drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config optionNitin Gote
Use IS_ENABLED() instead of defined() for checking whether a kconfig option is enabled. Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103062651.798249-2-nitin.r.gote@intel.com
2025-01-09mctp i3c: fix MCTP I3C driver multi-thread issueLeo Yang
We found a timeout problem with the pldm command on our system. The reason is that the MCTP-I3C driver has a race condition when receiving multiple-packet messages in multi-thread, resulting in a wrong packet order problem. We identified this problem by adding a debug message to the mctp_i3c_read function. According to the MCTP spec, a multiple-packet message must be composed in sequence, and if there is a wrong sequence, the whole message will be discarded and wait for the next SOM. For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM. Therefore, we try to solve this problem by adding a mutex to the mctp_i3c_read function. Before the modification, when a command requesting a multiple-packet message response is sent consecutively, an error usually occurs within 100 loops. After the mutex, it can go through 40000 loops without any error, and it seems to run well. Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <Leo-Yang@quantatw.com> Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com [pabeni@redhat.com: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09i2c: atr: Fix client detachTomi Valkeinen
i2c-atr catches the BUS_NOTIFY_DEL_DEVICE event on the bus and removes the translation by calling i2c_atr_detach_client(). However, BUS_NOTIFY_DEL_DEVICE happens when the device is about to be removed from this bus, i.e. before removal, and thus before calling .remove() on the driver. If the driver happens to do any i2c transactions in its remove(), they will fail. Fix this by catching BUS_NOTIFY_REMOVED_DEVICE instead, thus removing the translation only after the device is actually removed. Fixes: a076a860acae ("media: i2c: add I2C Address Translator (ATR) support") Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Tested-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-01-09i2c: core: fix reference leak in i2c_register_adapter()Joe Hattori
The reference count of the device incremented in device_initialize() is not decremented when device_add() fails. Add a put_device() call before returning from the function. This bug was found by an experimental static analysis tool that I am developing. Fixes: 60f68597024d ("i2c: core: Setup i2c_adapter runtime-pm before calling device_add()") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-01-09drm/xe/dg1: Fix power gate sequence.Rodrigo Vivi
sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks. VLK: 16314, 4304 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381 Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219235536.454270-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 2f12e9c029315c1400059b2e7fdf53117c09c3a9) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-09drm/xe: Fix tlb invalidation when wedgingLucas De Marchi
If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b726b93 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-09Merge tag 'drm-xe-next-2025-01-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - OA new property: 'unblock after N reports' (Ashutosh) i915 display Changes: - UHBR rates for Thunderbolt (Kahola) Driver Changes: - IRQ related fixes and improvements (Ilia) - Revert some changes that break a mesa debug tool (John) - Fix migration issues (Nirmoy) - Enable GuC's WA_DUAL_QUEUE for newer platforms (Daniele) - Move shrink test out of xe_bo (Nirmoy) - SRIOV PF: Use correct function to check LMEM provisioning (Michal) - Fix a false-positive "Missing outer runtime PM protection" warning (Rodrigo) - Make GSCCS disabling message less alarming (Daniele) - Fix DG1 power gate sequence (Rodrigo) - Xe files fixes (Lucas) - Fix a potential TP_printk UAF (Thomas) - OA Fixes (Umesh) - Fix tlb invalidation when wedging (Lucas) - Documentation fix (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31579j3V3XCPFaK@intel.com
2025-01-09Merge tag 'drm-misc-next-2025-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: - Clarify drm memory stats documentation Cross-subsystem Changes: Core Changes: - sched: Documentation fixes, Driver Changes: - amdgpu: Track BO memory stats at runtime - amdxdna: Various fixes - hisilicon: New HIBMC driver - bridges: - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106-augmented-kakapo-of-action-0cf000@houat
2025-01-09Merge tag 'mediatek-drm-next-6.14' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.14 1. dp: Add sdp path reset 2. dp: Support flexible length of DP calibration data Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250104125538.111118-1-chunkuang.hu@kernel.org
2025-01-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-07 (ice, igc) For ice: Arkadiusz corrects mask value being used to determine DPLL phase range. Przemyslaw corrects frequency value for E823 devices. For igc: En-Wei Wu adds a check and, early, return for failed register read. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: return early when failing to read EECD register ice: fix incorrect PHY settings for 100 GB/s ice: fix max values for dpll pin phase adjust ==================== Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08Merge tag 'for-net-2025-01-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix failed to send func ctrl for MediaTek devices. - hci_sync: Fix not setting Random Address when required - MGMT: Fix Add Device to responding before completing - btnxpuart: Fix driver sending truncated data * tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices. Bluetooth: btnxpuart: Fix driver sending truncated data Bluetooth: MGMT: Fix Add Device to responding before completing Bluetooth: hci_sync: Fix not setting Random Address when required ==================== Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08drm/xe/slpc: Remove unnecessary force wakesVinay Belgaumkar
FORCEWAKE_ALL is not needed when we are trying to read the cur_freq, we just need to wake up the GT domain. We also do not need a force wake to for a H2G query to obtain min frequency. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241216194119.3017792-1-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-08drm/xe: Introduce the RPa informationRodrigo Vivi
RPa is the Achievable frequency, defined by PCODE at runtime based on multiple running conditions. v2: Remove RPA_MASK from i915 file Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220152936.623627-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-08Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four driver fixes in UFS, mostly to do with power management" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs scsi: ufs: qcom: Allow passing platform specific OF data scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
2025-01-08cpuidle: riscv-sbi: fix device node release in early exit of ↵Javier Carrasco
for_each_possible_cpu The 'np' device_node is initialized via of_cpu_device_node_get(), which requires explicit calls to of_node_put() when it is no longer required to avoid leaking the resource. Instead of adding the missing calls to of_node_put() in all execution paths, use the cleanup attribute for 'np' by means of the __free() macro, which automatically calls of_node_put() when the variable goes out of scope. Given that 'np' is only used within the for_each_possible_cpu(), reduce its scope to release the nood after every iteration of the loop. Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241116-cpuidle-riscv-sbi-cleanup-v3-1-a3a46372ce08@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-08net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen
Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: don't auto enable misc vectorJian Shen
Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan
This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is stale. To solve this problem, this patch implements .open() and .release() handler for debugfs file_operations. moving allocation buffer and execution of the cmd to the .open() handler and freeing in to the .release() handler. Allocate separate buffer for each reader and associate the buffer with the file pointer. When different user read processes no longer share the buffer, the stale data problem is fixed. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fix missing features due to dev->features configuration too earlyHao Lan
Currently, the netdev->features is configured in hns3_nic_set_features. As a result, __netdev_update_features considers that there is no feature difference, and the procedures of the real features are missing. Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed reset failure issues caused by the incorrect reset typeHao Lan
When a reset type that is not supported by the driver is input, a reset pending flag bit of the HNAE3_NONE_RESET type is generated in reset_pending. The driver does not have a mechanism to clear this type of error. As a result, the driver considers that the reset is not complete. This patch provides a mechanism to clear the HNAE3_NONE_RESET flag and the parameter of hnae3_ae_ops.set_default_reset_request is verified. The error message: hns3 0000:39:01.0: cmd failed -16 hns3 0000:39:01.0: hclge device re-init failed, VF is disabled! hns3 0000:39:01.0: failed to reset VF stack hns3 0000:39:01.0: failed to reset VF(4) hns3 0000:39:01.0: prepare reset(2) wait done hns3 0000:39:01.0 eth4: already uninitialized Use the crash tool to view struct hclgevf_dev: struct hclgevf_dev { ... default_reset_request = 0x20, reset_level = HNAE3_NONE_RESET, reset_pending = 0x100, reset_type = HNAE3_NONE_RESET, ... }; Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08Merge tag 'for-6.13/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mikulas Patocka: - dm-array fixes - dm-verity forward error correction fixes - remove the flag DM_TARGET_PASSES_INTEGRITY from dm-ebs - dm-thin RCU list fix * tag 'for-6.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: make get_first_thin use rcu-safe list first function dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITY dm-verity FEC: Avoid copying RS parity bytes twice. dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2) dm array: fix cursor index when skipping across block boundaries dm array: fix unreleased btree blocks on closing a faulty array cursor dm array: fix releasing a faulty array block twice in dm_array_cursor_end
2025-01-08Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.Chris Lu
Use usb_autopm_get_interface() and usb_autopm_put_interface() in btmtk_usb_shutdown(), it could send func ctrl after enabling autosuspend. Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command timed out Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl (-110) Fixes: 5c5e8c52e3ca ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-08Bluetooth: btnxpuart: Fix driver sending truncated dataNeeraj Sanjay Kale
This fixes the apparent controller hang issue seen during stress test where the host sends a truncated payload, followed by HCI commands. The controller treats these HCI commands as a part of previously truncated payload, leading to command timeouts. Adding a serdev_device_wait_until_sent() call after serdev_device_write_buf() fixed the issue. Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-08misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set configRengarajan S
Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set config. Upper level driver checks for -ENOTSUPP. Because of the return code mismatch, the ioctls from userspace fail. Resolve the issue by passing -ENOTSUPP during unsupported case. Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handlingRengarajan S
Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08dm thin: make get_first_thin use rcu-safe list first functionKrister Johansen
The documentation in rculist.h explains the absence of list_empty_rcu() and cautions programmers against relying on a list_empty() -> list_first() sequence in RCU safe code. This is because each of these functions performs its own READ_ONCE() of the list head. This can lead to a situation where the list_empty() sees a valid list entry, but the subsequent list_first() sees a different view of list head state after a modification. In the case of dm-thin, this author had a production box crash from a GP fault in the process_deferred_bios path. This function saw a valid list head in get_first_thin() but when it subsequently dereferenced that and turned it into a thin_c, it got the inside of the struct pool, since the list was now empty and referring to itself. The kernel on which this occurred printed both a warning about a refcount_t being saturated, and a UBSAN error for an out-of-bounds cpuid access in the queued spinlock, prior to the fault itself. When the resulting kdump was examined, it was possible to see another thread patiently waiting in thin_dtr's synchronize_rcu. The thin_dtr call managed to pull the thin_c out of the active thins list (and have it be the last entry in the active_thins list) at just the wrong moment which lead to this crash. Fortunately, the fix here is straight forward. Switch get_first_thin() function to use list_first_or_null_rcu() which performs just a single READ_ONCE() and returns NULL if the list is already empty. This was run against the devicemapper test suite's thin-provisioning suites for delete and suspend and no regressions were observed. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep") Cc: stable@vger.kernel.org Acked-by: Ming-Hung Tsai <mtsai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-01-08dm-ebs: don't set the flag DM_TARGET_PASSES_INTEGRITYMikulas Patocka
dm-ebs uses dm-bufio to process requests that are not aligned on logical sector size. dm-bufio doesn't support passing integrity data (and it is unclear how should it do it), so we shouldn't set the DM_TARGET_PASSES_INTEGRITY flag. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: d3c7b35c20d6 ("dm: add emulated block size target")
2025-01-08drm/i915/gt: Prevent uninitialized pointer readsApoorva Singh
Initialize rq to NULL to prevent uninitialized pointer reads. Signed-off-by: Apoorva Singh <apoorva.singh@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241227112920.1547592-1-apoorva.singh@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-08staging: gpib: mite: remove unused global functionsGreg Kroah-Hartman
The mite.c file was originally copied from the COMEDI code, and now that it is in the kernel tree, along with the comedi code, on some build configurations there are errors due to duplicate symbols (specifically mite_dma_disarm). Remove all of the unused functions in the gpib mite.c and .h files as they aren't needed and cause the compiler to be confused. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202501081239.BAPhfAHJ-lkp@intel.com/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/2025010809-padding-survive-91b3@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-08USB: serial: option: add Neoway N723-EA supportMichal Hrusecky
Update the USB serial option driver to support Neoway N723-EA. ID 2949:8700 Marvell Mobile Composite Device Bus T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2949 ProdID=8700 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=200806006809080000 C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested successfully connecting to the Internet via rndis interface after dialing via AT commands on If#=4 or If#=6. Not sure of the purpose of the other serial interface. Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: option: add MeiG Smart SRM815Chukun Pan
It looks like SRM815 shares ID with SRM825L. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=123456 C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/lkml/20241215100027.1970930-1-amadeus@jmu.edu.cn/ Link: https://lore.kernel.org/all/4333b4d0-281f-439d-9944-5570cbc4971d@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: cp210x: add Phoenix Contact UPS DeviceJohan Hovold
Phoenix Contact sells UPS Quint devices [1] with a custom datacable [2] that embeds a Silicon Labs converter: Bus 001 Device 003: ID 1b93:1013 Silicon Labs Phoenix Contact UPS Device Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1b93 idProduct 0x1013 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Phoenix Contact UPS Device iSerial 3 <redacted> bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 Phoenix Contact UPS Device Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 [1] https://www.phoenixcontact.com/en-pc/products/power-supply-unit-quint-ps-1ac-24dc-10-2866763 [2] https://www.phoenixcontact.com/en-il/products/data-cable-preassembled-ifs-usb-datacable-2320500 Reported-by: Giuseppe Corbelli <giuseppe.corbelli@antaresvision.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offsetBinbin Zhou
Since commit 3feb70a61740 ("gpio: loongson: add more gpio chip support"), the Loongson-2K2000 GPIO is supported. However, according to the firmware development specification, the Loongson-2K2000 ACPI GPIO register offsets in the driver do not match the register base addresses in the firmware, resulting in the registers not being accessed properly. Now, we fix it to ensure the GPIO function works properly. Cc: stable@vger.kernel.org Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support") Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/20250107103856.1037222-1-zhoubinbin@loongson.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-08Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"Suraj Kandpal
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0. This needs to be reverted since HDCP even after updating the connector state HDCP property we don't reenable HDCP until the next commit in which the CP Property is set causing compliance to fail. --v2 -Fix build issue [Dnyaneshwar] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com (cherry picked from commit fcf73e20cd1fe60c3ba5f9626f1e8f9cd4511edf) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2025-01-07eth: gve: use appropriate helper to set xdp_featuresJakub Kicinski
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine") added routines to inform the core about XDP flag changes. GVE support was added around the same time and missed using them. GVE only changes the flags on error recover or resume. Presumably the flags may change during resume if VM migrated. User would not get the notification and upper devices would not get a chance to recalculate their flags. Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") Reviewed-By: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occurDaniil Stas
scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors") Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net [groeck: Avoid inline variable declaration for portability] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-07drm/xe/vf: Don't apply Wa_22019338487 for VFMarcin Bernatowicz
Don't use Wa_22019338487 for VF. Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Adam Miszczak <adam.miszczak@linux.intel.com> Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Lukasz Laguna <lukasz.laguna@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Narasimha C V <narasimha.c.v@intel.com> Cc: Piotr Piorkowski <piotr.piorkowski@intel.com> Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-4-marcin.bernatowicz@linux.intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-07drm/xe/rtp: Add match helper to omit SR-IOV VF deviceMarcin Bernatowicz
Add a match helper that allows the application of a workaround when the device is not an SR-IOV VF (Virtual Function) device. Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Adam Miszczak <adam.miszczak@linux.intel.com> Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Lukasz Laguna <lukasz.laguna@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Narasimha C V <narasimha.c.v@intel.com> Cc: Piotr Piorkowski <piotr.piorkowski@intel.com> Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-3-marcin.bernatowicz@linux.intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-07drm/xe/vf: Don't check has flat ccs in bios on VFJakub Kolakowski
Don't check for flat ccs from VF-level as VF does not have direct access to the register. If the BIOS disables FlatCCS support (a use-case that will nearly never be used) and the has_flat_ccs flag is set, there shouldn't be any functional impact. The hardware will drop writes to the CCS region, and reads from the CCS region will always return 0. For the native case, the flag is disabled if the BIOS disables it to avoid unnecessary overhead in buffer object (BO) creation and migration. Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Suggested-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Adam Miszczak <adam.miszczak@linux.intel.com> Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com> Cc: Lukasz Laguna <lukasz.laguna@intel.com> Cc: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Narasimha C V <narasimha.c.v@intel.com> Cc: Piotr Piorkowski <piotr.piorkowski@intel.com> Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211064211.781820-2-marcin.bernatowicz@linux.intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-07PCI/bwctrl: Fix NULL pointer deref on unbind and bindLukas Wunner
The interrupt handler for bandwidth notifications, pcie_bwnotif_irq(), dereferences a "data" pointer. On unbind, that pointer is set to NULL by pcie_bwnotif_remove(). However the interrupt handler may still be invoked afterwards and will dereference that NULL pointer. That's because the interrupt is requested using a devm_*() helper and the driver core releases devm_*() resources *after* calling ->remove(). pcie_bwnotif_remove() does clear the Link Bandwidth Management Interrupt Enable and Link Autonomous Bandwidth Interrupt Enable bits in the Link Control Register, but that won't prevent execution of pcie_bwnotif_irq(): The interrupt for bandwidth notifications may be shared with AER, DPC, PME, and hotplug. So pcie_bwnotif_irq() may be executed as long as the interrupt is requested. There's a similar race on bind: pcie_bwnotif_probe() requests the interrupt when the "data" pointer still points to NULL. A NULL pointer deref may thus likewise occur if AER, DPC, PME or hotplug raise an interrupt in-between the bandwidth controller's call to devm_request_irq() and assignment of the "data" pointer. Drop the devm_*() usage and reorder requesting of the interrupt to fix the issue. While at it, drop a stray but harmless no_free_ptr() invocation when assigning the "data" pointer in pcie_bwnotif_probe(). Ilpo points out that the locking on unbind and bind needs to be symmetric, so move the call to pcie_bwnotif_disable() inside the critical section protected by pcie_bwctrl_setspeed_rwsem and pcie_bwctrl_lbms_rwsem. Evert reports a hang on shutdown of an ASUS ROG Strix SCAR 17 G733PYV. The issue is no longer reproducible with the present commit. Evert found that attaching a USB-C monitor prevented the hang. The machine contains an ASMedia USB 3.2 controller below a hotplug-capable Root Port. So one possible explanation is that the controller gets hot-removed on shutdown unless something is connected. And the ensuing hotplug interrupt occurs exactly when the bandwidth controller is unregistering. The precise cause could not be determined because the screen had already turned black when the hang occurred. Link: https://lore.kernel.org/r/ae2b02c9cfbefff475b6e132b0aa962aaccbd7b2.1736162539.git.lukas@wunner.de Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") Reported-by: Evert Vorster <evorster@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219629 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Evert Vorster <evorster@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON ↵Su Hui
interface" There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl' is uninitialized which makes 'sensor' and '*val' to be stored garbage value. Revert commit d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface") to avoid this problem. Fixes: d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface") Signed-off-by: Su Hui <suhui@nfschina.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07thermal: of: fix OF node leak in of_thermal_zone_find()Joe Hattori
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not release the OF node reference obtained by it. Add a of_node_put() call when the call is successful. Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp [ rjw: Changelog edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: acpi_dev_irq_override(): Check DMI match lastHans de Goede
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy IRQs * 2 override_table entries). Of these 30 calls at max 1 will match the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system() check is by far the most expensive check done by acpi_dev_irq_override(), make this call the last check done by acpi_dev_irq_override() so that it will be called at max 1 time instead of 30 times. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]Hans de Goede
The TongFang GM5HG0A is a TongFang barebone design which is sold under various brand names. The ACPI IRQ override for the keyboard IRQ must be used on these AMD Zen laptops in order for the IRQ to work. At least on the SKIKK Vanaheim variant the DMI product- and board-name strings have been replaced by the OEM with "Vanaheim" so checking that board-name contains "GM5HG0A" as is usually done for TongFang barebones quirks does not work. The DMI OEM strings do contain "GM5HG0A". I have looked at the dmidecode for a few other TongFang devices and the TongFang code-name string being in the OEM strings seems to be something which is consistently true. Add a quirk checking one of the DMI_OEM_STRING(s) is "GM5HG0A" in the hope that this will work for other OEM versions of the "GM5HG0A" too. Link: https://www.skikk.eu/en/laptops/vanaheim-15-rtx-4060 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219614 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20241228164845.42381-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]Hans de Goede
Like the Vivobook X1704VAP the X1504VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the X1504VAP to the irq1_level_low_skip_override[] quirk table to fix this. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20241220181352.25974-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07drm/i915/display: convert global state to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device structure. Convert intel_global_state.[ch] to it. This allows us to make intel_pmdemand.c completely independent of i915_drv.h. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2b5e743b285a86a59ee87085727847c758c8d552.1735662324.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07drm/i915/pmdemand: convert to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device structure. Convert pmdemand to it. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c1d92e9490013d5aba50fc1d1ebc0ee18e82cf7e.1735662324.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07drm/i915/pmdemand: make struct intel_pmdemand_state opaqueJani Nikula
Only intel_pmdemand.c should look inside the struct intel_pmdemand_state. Indeed, this is already the case. Finish the job and make struct intel_pmdemand_state opaque, preventing any direct pokes at the guts of it in the future. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bc5f418785ecd51454761e9a55f21340470a92e3.1735662324.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 17:55:34 +0000