summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-07drm/i915/pmdemand: convert to_intel_pmdemand_state() to a functionJani Nikula
In preparation for making struct intel_pmdemand_state an opaque type, convert to_intel_pmdemand_state() to a function. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/10324781f9f7eae5a92506aaa7a40403efd345dd.1735662324.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07igc: return early when failing to read EECD registerEn-Wei Wu
When booting with a dock connected, the igc driver may get stuck for ~40 seconds if PCIe link is lost during initialization. This happens because the driver access device after EECD register reads return all F's, indicating failed reads. Consequently, hw->hw_addr is set to NULL, which impacts subsequent rd32() reads. This leads to the driver hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr prevents retrieving the expected value. To address this, a validation check and a corresponding return value catch is added for the EECD register read result. If all F's are returned, indicating PCIe link loss, the driver will return -ENXIO immediately. This avoids the 40-second hang and significantly improves boot time when using a dock with an igc NIC. Log before the patch: [ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set. [ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13 [ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity Log after the patch: [ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity Fixes: ab4056126813 ("igc: Add NVM support") Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix incorrect PHY settings for 100 GB/sPrzemyslaw Korba
ptp4l application reports too high offset when ran on E823 device with a 100GB/s link. Those values cannot go under 100ns, like in a working case when using 100 GB/s cable. This is due to incorrect frequency settings on the PHY clocks for 100 GB/s speed. Changes are introduced to align with the internal hardware documentation, and correctly initialize frequency in PHY clocks with the frequency values that are in our HW spec. To reproduce the issue run ptp4l as a Time Receiver on E823 device, and observe the offset, which will never approach values seen in the PTP working case. Reproduction output: ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002 ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002 ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002 ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002 ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002 ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002 ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002 ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002 ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002 ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002 ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002 Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Reviewed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix max values for dpll pin phase adjustArkadiusz Kubalewski
Mask admin command returned max phase adjust value for both input and output pins. Only 31 bits are relevant, last released data sheet wrongly points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities Command for reference. Fix of the datasheet itself is in progress. Fix the min/max assignment logic, previously the value was wrongly considered as negative value due to most significant bit being set. Example of previous broken behavior: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, Correct behavior with the fix: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 2147466925, 'phase-adjust-min': -2147466925, [1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07topology: Keep the cpumask unchanged when printing cpumapLi Huafei
During fuzz testing, the following warning was discovered: different return values (15 and 11) from vsnprintf("%*pbl ", ...) test:keyward is WARNING in kvasprintf WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130 Call Trace: kvasprintf+0x121/0x130 kasprintf+0xa6/0xe0 bitmap_print_to_buf+0x89/0x100 core_siblings_list_read+0x7e/0xb0 kernfs_file_read_iter+0x15b/0x270 new_sync_read+0x153/0x260 vfs_read+0x215/0x290 ksys_read+0xb9/0x160 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 The call trace shows that kvasprintf() reported this warning during the printing of core_siblings_list. kvasprintf() has several steps: (1) First, calculate the length of the resulting formatted string. (2) Allocate a buffer based on the returned length. (3) Then, perform the actual string formatting. (4) Check whether the lengths of the formatted strings returned in steps (1) and (2) are consistent. If the core_cpumask is modified between steps (1) and (3), the lengths obtained in these two steps may not match. Indeed our test includes cpu hotplugging, which should modify core_cpumask while printing. To fix this issue, cache the cpumask into a temporary variable before calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged during the printing process. Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI") Cc: stable <stable@kernel.org> Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07drm/i915/dp: compute config for 128b/132b SST w/o DSCJani Nikula
Enable basic 128b/132b SST functionality without compression. Reuse intel_dp_mtp_tu_compute_config() to figure out the TU after we've determined we need to use an UHBR rate. It's slightly complicated as the M/N computation is done in different places in MST and SST paths, so we need to avoid trashing the values later for UHBR. If uncompressed UHBR fails, we drop to compressed non-UHBR, which is quite likely to fail as well. We still lack 128b/132b SST+DSC. We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder directly. Enhanced framing is "don't care" for 128b/132b link. v2: mst_master_transcoder, enhanced framing (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/084e4e05bf25a5dd396dd391014943d42b11c88d.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: disable trancoder port select for 128b/132b SSTJani Nikula
128b/1232b SST will have mst_master_transcoder set and matching cpu_transcoder. Ensure disable also for 128b/132b SST. Reviewed-by: Imre Deak <imre.deak@intel.com> Co-developed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eaf705b3490d828ba33e85f40a7794d58de7c5ad.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()Jani Nikula
We'll only ever get here in MST mode from MST stream encoders; the primary encoder's ->get_config() won't be called when we've detected it's MST. v2: Read mst_master_transcoder in 128b/132b SST path (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/436854c0bb6ab5c14c3d3837694ea60ac2fbaba2.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readoutJani Nikula
We'll want to distinguish 128b/132b SST and MST modes at state readout. There's a catch, though. From the hardware perspective, 128b/132b SST and MST programming are pretty much the same. And we can't really ask the sink at this point. If we have more than one transcoder in 128b/132b mode associated with the port, we can safely assume it's MST. But for MST with only a single stream enabled, we are pretty much out of luck. Let's fall back to looking at the software state, i.e. intel_dp->is_mst. It should be fine for the state checker, but for hardware takeover at probe, we'll have to trust the GOP has only enabled SST. TODO: Not sure how this *or* our current code handles 128b/132b enabled by GOP. Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/119a773a0d4d74ad204435e462f8d12cb0ea4128.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: enable ACT handling for 128b/132b SSTJani Nikula
Add ACT handling for 128b/132b SST enable/disable. This is preparation for enabling 128b/132b SST. This path is not reachable yet. v2: - Check for !is_hdmi (Imre) - Add disable sequence (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0226471f9445d988917cee49dbbd93a1493f3c7.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registersJani Nikula
Write the DP2 specific VFREQ registers. This is preparation for enabling 128b/132b SST. This path is not reachable yet. v2: Check for !is_hdmi (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7d90547e9ce01642b722efca0bf81cadb754e790.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: write payload for 128b/132b SSTJani Nikula
Write the payload allocation table for 128b/132b SST. Use VCPID 1 and start from slot 0, with dp_m_n.tu slots. This is preparation for enabling 128b/132b SST. This path is not reachable yet. Indeed, we don't yet compute TU for 128b/132b SST. v2: Handle drm_dp_dpcd_write_payload() failures (Imre) v3: Include drm_dp_helper.h (kernel test robot) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250107095414.1244286-1-jani.nikula@intel.com
2025-01-07drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MSTJani Nikula
It's not very clearly specified, and the hardware bit is ill-named, but 128b/132b SST also needs the MST mode set in the DP_TP_CTL register. This is preparation for enabling 128b/132b SST. This path is not reachable yet. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b29fbba8c979a8bab2bf03088610fe408faaf704.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SSTJani Nikula
128b/132b SST needs 128b/132b mode enabled in the TRANS_DDI_FUNC_CTL register. This is preparation for enabling 128b/132b SST. This path is not reachable yet. v2: Use the MST path instead of SST to also set transport select (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/122ebeadf4bf0870fc26b7d12abdff88f4be8799.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SSTJani Nikula
Handle 128b/132b SST in intel_dp_mtp_tu_compute_config(). The remote bandwidth overhead and time slot allocation are only relevant for MST; SST only needs the local bandwidth and a check that 64 slots isn't exceeded. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b59c94b0aac2c073b0306c0a0040b26330f94260.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: split out a helper for figuring out the TUJani Nikula
Extract intel_dp_mtp_tu_compute_config() for figuring out the TU. Move the link configuration and mst state access to the callers. This will be easier to adapt to 128b/132b SST. v2: Don't add SST stuff here yet Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c3ea8370c9bd3cdc579159e68a63f4ed2fadc66a.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: remove crtc_state->pbnJani Nikula
The crtc_state->pbn member is only used as a temporary variable within mst_stream_find_vcpi_slots_for_bpp(). Remove it as unnecessary. Suggested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/726aaadbd425057dfd854e42417bcf8d69b769d3.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()Jani Nikula
The callers of mst_stream_find_vcpi_slots_for_bpp() don't need the returned slots for anything. On the contrary, they need to jump through hoops to just distinguish between success and failure. Just return 0 instead of slots from mst_stream_find_vcpi_slots_for_bpp() for success, and simplify the callers. There's a pointless ret local variable that we can drop in the process. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7b3671a548c893b1bb62151d41f90bb8ce842ccc.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()Jani Nikula
intel_dp_mst_compute_m_n() doesn't need the connector. Remove the parameter. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eec2e9a2e2dc3d166ac94bb9de691246a14d3945.1735912293.git.jani.nikula@intel.com
2025-01-07drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()Jani Nikula
intel_dp_mst_bw_overhead() doesn't need the connector. Remove the parameter. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e1379aca0748e392d8a232135b823deec783e829.1735912293.git.jani.nikula@intel.com
2025-01-07drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()Jani Nikula
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug logging in case the passed in link rate or lane count are zero. There's no further error checking as such, and the function returns 0. There should be no case where the parameters are zero. The returned value is generally used as a divisor, and if we were hitting this, we'd be seeing division by zero. Just remove the debug logging altogether, along with the mgr parameter, so that the function can be used in non-MST contexts without the topology manager. v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre) Cc: Imre Deak <imre.deak@intel.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
2025-01-07Merge drm/drm-next into drm-intel-nextJani Nikula
Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07Merge tag 'drm-intel-next-2024-12-11' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Core Changes: - drm/print: add drm_print_hex_dump() Driver Changes: - HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj) - Add dedicated lock for each sideband (Jani) - New GSC FW for ARL-H and ARL-U (Daniele) - Add support for 3 VDSC engines 12 slices (Ankit) - Sanitize MBUS joining (Ville) - Fixes in DP MST (Imre) - Stop using pixel_format_from_register_bits() to parse VBT (Ville) - Declutter CDCLK code (Ville) - PSR clean up and fixes (Jouni, Jani, Animesh) - DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo) - Demote source OUI read/write failure logging to debug (Jani) - Potential boot oops fix and some general cleanups (Ville) - Scaler code cleanups (Ville) - More conversion towards struct intel_display and general cleanups (Jani) - Limit max compressed bpp to 18 when forcing DSC (Ankit) - Start to reconcile i915's and xe's display power mgt sequences (Rodrigo) - Some correction in the DP Link Training sequence (Arun) - Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit) - MST and DDI cleanups and refactoring (Jani) - Fixed an typo in i915_gem_gtt.c (Zhang) - Try to make DPT shrinkable again (Ville) - Try to fix CPU MMIO fails during legacy LUT updates (Ville) - Some PPS cleanups (Ville, Jani) - Use seq buf for printing rates (Jani) - Flush DMC wakelock release work at the end of runtime suspend (Gustavo) - Fix NULL pointer dereference in capture_engine (Eugene) - Fix memory leak by correcting cache object name in error handler (Jiasheng) - Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj) - Add drm_printer based hex dumper and use it (Jani) - Move g4x code to specific g4x functions (Jani) Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> [sima: conflict in intel_dp_mst.c due to conversion to drm_connector_dynamic_init that landed through drm-misc] Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
2025-01-07platform/x86: intel/pmc: Fix ioremap() of bad addressDavid E. Box
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM devices are retrieved from the MMIO region of the primary SSRAM device. If additional devices are not present, the address returned is zero. Currently, the code does not check for this condition, resulting in ioremap() incorrectly attempting to map address 0. Add a check for a zero address and return 0 if no additional devices are found, as it is not an error for the device to be absent. Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86: ISST: Add Clearwater Forest to support listSrinivas Pandruvada
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by adding to isst_cpu_ids. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86/intel: power-domains: Add Clearwater Forest supportSrinivas Pandruvada
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids to support domaid id mappings. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled itMaciej S. Szmigiero
Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name [ij: edited the commit message.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07drm/nouveau/disp: Fix missing backlight control on Macbook 5,1Takashi Iwai
Macbook 5,1 with MCP79 lost its backlight control since the recent change for supporting GSP-RM; it rewrote the whole nv50 backlight control code and each display engine is supposed to have an entry for IOR bl callback, but it didn't cover mcp77. This patch adds the missing bl entry initialization for mcp77 display engine to recover the backlight control. Fixes: 2274ce7e3681 ("drm/nouveau/disp: add output backlight control methods") Cc: stable@vger.kernel.org Link: https://bugzilla.suse.com/show_bug.cgi?id=1223838 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250102114944.11499-1-tiwai@suse.de
2025-01-07staging: gpib: refer to correct config symbol in tnt4882 MakefileLukas Bulwahn
Commit 79d2e1919a27 ("staging: gpib: fix Makefiles") uses the corresponding config symbols to let Makefiles include the driver sources appropriately in the kernel build. Unfortunately, the Makefile in the tnt4882 directory refers to the non-existing config GPIB_TNT4882. The actual config name for this driver is GPIB_NI_PCI_ISA, as can be observed in the gpib Makefile. Probably, this is caused by the subtle differences between the config names, directory names and file names in ./drivers/staging/gpib/, where often config names and directory names are identical or at least close in naming, but in this case, it is not. Change the reference in the tnt4882 Makefile from the non-existing config GPIB_TNT4882 to the existing config GPIB_NI_PCI_ISA. Fixes: 79d2e1919a27 ("staging: gpib: fix Makefiles") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Link: https://lore.kernel.org/r/20250107135032.34424-1-lukas.bulwahn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()GONG Ruiqi
The error handling for the case `con_index == 0` should involve dropping the pm usage counter, as ucsi_ccg_sync_control() gets it at the beginning. Fix it. Cc: stable <stable@kernel.org> Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()") Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb-storage: Add max sectors quirk for Nokia 208Lubomir Rintel
This fixes data corruption when accessing the internal SD card in mass storage mode. I am actually not too sure why. I didn't figure a straightforward way to reproduce the issue, but i seem to get garbage when issuing a lot (over 50) of large reads (over 120 sectors) are done in a quick succession. That is, time seems to matter here -- larger reads are fine if they are done with some delay between them. But I'm not great at understanding this sort of things, so I'll assume the issue other, smarter, folks were seeing with similar phones is the same problem and I'll just put my quirk next to theirs. The "Software details" screen on the phone is as follows: V 04.06 07-08-13 RM-849 (c) Nokia TL;DR version of the device descriptor: idVendor 0x0421 Nokia Mobile Phones idProduct 0x06c2 bcdDevice 4.06 iManufacturer 1 Nokia iProduct 2 Nokia 208 The patch assumes older firmwares are broken too (I'm unable to test, but no biggie if they aren't I guess), and I have no idea if newer firmware exists. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb: gadget: midi2: Reverse-select at the right placeTakashi Iwai
We should do reverse selection of other components from CONFIG_USB_F_MIDI2 which is tristate, instead of CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle module dependencies. Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCYAnimesh Manna
Increase the PKG_C_LATENCY Pkg C Latency field by the added wake time. v1: Initial version. v2: Rebase and cosmetic changes. v3: - Place latency adjustment early to accommodate round-up. [Suraj] - Modify commit description and cosmetic change. [Suraj] WA: 22020432604 Cc: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106094408.1011063-1-animesh.manna@intel.com
2025-01-07drm/i915/dp: Return early if dsc is required but not supportedAnkit Nautiyal
Currently, when bandwidth is insufficient for a given mode, we attempt to use DSC. This is indicated by a debug print, followed by a check for DSC support. The debug message states that we are trying DSC, but DSC might not be supported, which can give an incorrect picture in the logs if we bail out later. Correct the order for both DP and DP MST to: - Check if DSC is required and supported, and return early if DSC is not supported. - Print a debug message to indicate that DSC will be tried next. Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103031424.1732774-1-ankit.k.nautiyal@intel.com
2025-01-06cxgb4: Avoid removal of uninserted tidAnumula Murali Mohan Reddy
During ARP failure, tid is not inserted but _c4iw_free_ep() attempts to remove tid which results in error. This patch fixes the issue by avoiding removal of uninserted tid. Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base") Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06bnxt_en: Fix DIM shutdownMichael Chan
DIM work will call the firmware to adjust the coalescing parameters on the RX rings. We should cancel DIM work before we call the firmware to free the RX rings. Otherwise, FW will reject the call from DIM work if the RX ring has been freed. This will generate an error message like this: bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2 and cause unnecessary concern for the user. It is also possible to modify the coalescing parameters of the wrong ring if the ring has been re-allocated. To prevent this, cancel DIM work right before freeing the RX rings. We also have to add a check in NAPI poll to not schedule DIM if the RX rings are shutting down. Check that the VNIC is active before we schedule DIM. The VNIC is always disabled before we free the RX rings. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06bnxt_en: Fix possible memory leak when hwrm_req_replace failsKalesh AP
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop() which could cause a memory leak. Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06pds_core: limit loop over fw name listShannon Nelson
Add an array size limit to the for-loop to be sure we don't try to reference a fw_version string off the end of the fw info names array. We know that our firmware only has a limited number of firmware slot names, but we shouldn't leave this unchecked. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250103195147.7408-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06drm/amdgpu: Add a lock when accessing the buddy trim functionArunpravin Paneer Selvam
When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Fixes: 4a5ad08f5377 ("drm/amdgpu: Add address alignment support to DCC buffers") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) Cc: stable@vger.kernel.org
2025-01-06drm/amd/pm: fix BUG: scheduling while atomicKun Liu
atomic scheduling will be triggered in interrupt handler for AC/DC mode switch as following backtrace. Call Trace: <IRQ> dump_stack_lvl __schedule_bug __schedule schedule schedule_preempt_disabled __mutex_lock smu_cmn_send_smc_msg_with_param smu_v13_0_irq_process amdgpu_irq_dispatch amdgpu_ih_process amdgpu_irq_handler __handle_irq_event_percpu handle_irq_event handle_edge_irq __common_interrupt common_interrupt </IRQ> <TASK> asm_common_interrupt Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 03cc84b102d1a832e8dfc59344346dedcebcdf42) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: wq_release signals dma_fence only when availableZhu Lingshan
kfd_process_wq_release() signals eviction fence by dma_fence_signal() which wanrs if dma_fence is NULL. kfd_process->ef is initialized by kfd_process_device_init_vm() through ioctl. That means the fence is NULL for a new created kfd_process, and close a kfd_process right after open it will trigger the warning. This commit conditionally signals the eviction fence in kfd_process_wq_release() only when it is available. [ 503.660882] WARNING: CPU: 0 PID: 9 at drivers/dma-buf/dma-fence.c:467 dma_fence_signal+0x74/0xa0 [ 503.782940] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [ 503.789640] RIP: 0010:dma_fence_signal+0x74/0xa0 [ 503.877620] Call Trace: [ 503.880066] <TASK> [ 503.882168] ? __warn+0xcd/0x260 [ 503.885407] ? dma_fence_signal+0x74/0xa0 [ 503.889416] ? report_bug+0x288/0x2d0 [ 503.893089] ? handle_bug+0x53/0xa0 [ 503.896587] ? exc_invalid_op+0x14/0x50 [ 503.900424] ? asm_exc_invalid_op+0x16/0x20 [ 503.904616] ? dma_fence_signal+0x74/0xa0 [ 503.908626] kfd_process_wq_release+0x6b/0x370 [amdgpu] [ 503.914081] process_one_work+0x654/0x10a0 [ 503.918186] worker_thread+0x6c3/0xe70 [ 503.921943] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.926735] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.931527] ? __kthread_parkme+0x82/0x140 [ 503.935631] ? __pfx_worker_thread+0x10/0x10 [ 503.939904] kthread+0x2a8/0x380 [ 503.943132] ? __pfx_kthread+0x10/0x10 [ 503.946882] ret_from_fork+0x2d/0x70 [ 503.950458] ? __pfx_kthread+0x10/0x10 [ 503.954210] ret_from_fork_asm+0x1a/0x30 [ 503.958142] </TASK> [ 503.960328] ---[ end trace 0000000000000000 ]--- Fixes: 967d226eaae8 ("dma-buf: add WARN_ON() illegal dma-fence signaling") Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2774ef7625adb5fb9e9265c26a59dca7b8fd171e) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Add check for granularity in dml ceil/floor helpersRoman Li
[Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: fixed page fault when enable MES shader debuggerJesse.zhang@amd.com
Initialize the process context address before setting the shader debugger. [ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40 [ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0 [ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41 [ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b231f5bc9ff02ec5737f2ec95cdf15ac95088e9) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix divide error in DM plane scale calcsMelissa Wen
dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Co-developed-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: increase MAX_SURFACES to the value supported by hwMelissa Wen
As the hw supports up to 4 surfaces, increase the maximum number of surfaces to prevent the DC error when trying to use more than three planes. [drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b8d6daffc871a42026c3c20bff7b8fa0302298c1) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix page fault due to max surface definition mismatchMelissa Wen
DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <sunpeng.li@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Remove unnecessary amdgpu_irq_get/putAlex Hung
[WHY & HOW] commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank, and amdgpu_irq_get/put do not need to be called here. Part of that patch got lost somehow, so fix it up. Fixes: 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3782305ce5807c18fbf092124b9e8303cf1723ae) Cc: stable@vger.kernel.org
2025-01-06drm/amdgpu: Remove unnecessary NULL checkKent Russell
container_of cannot return NULL, so it is unnecessary to check for NULL after gem_to_amdgpu_bo, which is just a container_of call Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/pm: Fill max mem bw & total app clk counterAsad Kamal
Fill max memory bandwidth and total app clock counter to metrics v1_7 v2: Remove unnecessary check v3: Add app clock counter support for apu Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal
Update pmfw headers for smuv13.0.6 to pmfw version 85.121 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 00:02:58 +0000