| Age | Commit message (Collapse) | Author |
|---|
|
Current implementation of stmmac_probe_config_dt() does not release the
OF node reference obtained by of_parse_phandle() in some error paths.
The problem is that some error paths call stmmac_remove_config_dt() to
clean up but others use and unwind ladder. These two types of error
handling have not kept in sync and have been a recurring source of bugs.
Re-write the error handling in stmmac_probe_config_dt() to use an unwind
ladder. Consequently, stmmac_remove_config_dt() is not needed anymore,
thus remove it.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 4838a5405028 ("net: stmmac: Fix wrapper drivers not detecting PHY")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241219024119.2017012-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
the error path of .probe()
Current implementation of ci_hdrc_imx_driver does not decrement the
refcount of the device obtained in usbmisc_get_init_data(). Add a
put_device() call in .remove() and in .probe() before returning an
error.
This bug was found by an experimental static analysis tool that I am
developing.
Cc: stable <stable@kernel.org>
Fixes: f40017e0f332 ("chipidea: usbmisc_imx: Add USB support for VF610 SoCs")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20241216015539.352579-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation of the ucsi glink client connector_status()
callback is only relying on the state of the gpio. This means that even
when the cable is unplugged, the orientation propagated to the switches
along the graph is "orientation normal", instead of "orientation none",
which would be the correct one in this case.
One of the Qualcomm DP-USB PHY combo drivers, which needs to be aware of
the orientation change, is relying on the "orientation none" to skip
the reinitialization of the entire PHY. Since the ucsi glink client
advertises "orientation normal" even when the cable is unplugged, the
mentioned PHY is taken down and reinitialized when in fact it should be
left as-is. This triggers a crash within the displayport controller driver
in turn, which brings the whole system down on some Qualcomm platforms.
Propagating "orientation none" from the ucsi glink client on the
connector_status() callback hides the problem of the mentioned PHY driver
away for now. But the "orientation none" is nonetheless the correct one
to be used in this case.
So propagate the "orientation none" instead when the connector status
flags says cable is disconnected.
Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
Cc: stable <stable@kernel.org> # 6.10
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241212-usb-typec-ucsi-glink-add-orientation-none-v2-1-db5a50498a77@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit c033563220e0f7a8
("usb: gadget: configfs: Attach arbitrary strings to cdev")
a user can provide extra string descriptors to a USB gadget via configfs.
For "manufacturer", "product", "serialnumber", setting the string via
configfs ignores a trailing LF.
For the arbitrary strings the LF was not ignored.
This patch ignores a trailing LF to make this consistent with the existing
behavior for "manufacturer", ... string descriptors.
Fixes: c033563220e0 ("usb: gadget: configfs: Attach arbitrary strings to cdev")
Cc: stable <stable@kernel.org>
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20241212154114.29295-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the regression introduced by commit d8c6edfa3f4e ("USB:
usblp: don't call usb_set_interface if there's a single alt"),
which causes that unsupported protocols can also be set via
ioctl when the num_altsetting of the device is 1.
Move the check for protocol support to the earlier stage.
Fixes: d8c6edfa3f4e ("USB: usblp: don't call usb_set_interface if there's a single alt")
Cc: stable <stable@kernel.org>
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://lore.kernel.org/r/20241212143852.671889-1-jerrysteve1101@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently afunc_bind sets std_ac_if_desc.bNumEndpoints to 1 if
controls (mute/volume) are enabled. During next afunc_bind call,
bNumEndpoints would be unchanged and incorrectly set to 1 even
if the controls aren't enabled.
Fix this by resetting the value of bNumEndpoints to 0 on every
afunc_bind call.
Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20241211115915.159864-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CSR dump support leverages the FBNIC_BOUNDS macro, which pads the end
condition for each section by adding an offset of 1. However, the RPC RAM
section, which is dumped differently from other sections, does not rely
on this macro and instead directly uses end boundary address. Hence,
subtracting 1 from the end address results in skipping a register.
Fixes 3d12862b216d (“eth: fbnic: Add support to dump registers”)
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241218232614.439329-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
max_contaminant_read_resistance_kohm()
If max_contaminant_read_adc_mv() fails, then return the error code. Don't
return zero.
Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/f1bf3768-419e-40dd-989c-f7f455d6c824@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XHCI_SKIP_PHY_INIT property
The source of quirk XHCI_SKIP_PHY_INIT comes from xhci_plat_priv.quirks or
software node property. This will set skip_phy_initialization if software
node also has XHCI_SKIP_PHY_INIT property.
Fixes: a6cd2b3fa894 ("usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241209111423.4085548-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Runtime PM documentation (Section 5) mentions, during remove()
callbacks, drivers should undo the runtime PM changes done in
probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc. Hence add missing
function to disable autosuspend on dwc3-am62 driver unbind.
Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209105728.3216872-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before writing a new value to the register, the old value needs to be
masked out for the new value to be programmed as intended, because at
least in some cases the reset value of that field is 0xf (max value).
At the moment, the dwc3 core initialises the threshold to the maximum
value (0xf), with the option to override it via a DT. No upstream DTs
seem to override it, therefore this commit doesn't change behaviour for
any upstream platform. Nevertheless, the code should be fixed to have
the desired outcome.
Do so.
Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support")
Cc: stable@vger.kernel.org # 5.10+ (needs adjustment for 5.4)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241209-dwc3-nyet-fix-v2-1-02755683345b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit
afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format")
exposes potential UAFs in the xe_bo_move trace event.
Fix those by avoiding dereferencing the
xe_mem_type_to_name[] array at TP_printk time.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
Fixes: e46d3f813abd ("drm/xe/trace: Extract bo, vm, vma traces")
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241223134250.14345-1-thomas.hellstrom@linux.intel.com
|
|
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
Fixes: 514447a12190 ("drm/xe: Stop accumulating LRC timestamp on job_free")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a typo in function call and instead of VF LMEM we were
looking at VF GGTT provisioning. Fix that.
Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216223253.819-1-michal.wajdeczko@intel.com
(cherry picked from commit a8d0aa0e7fcd20c9f1992688c0f0d07a68287403)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix a potential GPU page fault during tt -> system moves by waiting for
migration jobs to complete before unmapping SG. This ensures that IOMMU
mappings are not prematurely torn down while a migration job is still in
progress.
v2: Use intr=false(Matt A)
v3: Update commit message(Matt A)
v4: s/DMA_RESV_USAGE_BOOKKEEP/DMA_RESV_USAGE_KERNEL(Thomas)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3466
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-2-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit cda06412c06893a6f07a2fbf89d42a0972ec9e8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Ensure a non-interruptible wait is used when moving a bo to
XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely
while a GPU job is still in progress, even if the CPU receives a
signal during the operation.
Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213122415.3880017-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit dc5e20ae1f8a7c354dc9833faa2720254e5a5443)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a mesa debug tool for decoding devcoredump files. Recent
changes to improve the devcoredump output broke that tool. So revert
the changes until the tool can be extended to support the new fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 70fb86a85dc9fd66014d7eb2fe356f50702ceeb6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Flush CQE handler has not been called if QP state gets into errored
mode in DWQE path. So, the new added outstanding WQEs will never be
flushed.
It leads to a hung task timeout when using NFS over RDMA:
__switch_to+0x7c/0xd0
__schedule+0x350/0x750
schedule+0x50/0xf0
schedule_timeout+0x2c8/0x340
wait_for_common+0xf4/0x2b0
wait_for_completion+0x20/0x40
__ib_drain_sq+0x140/0x1d0 [ib_core]
ib_drain_sq+0x98/0xb0 [ib_core]
rpcrdma_xprt_disconnect+0x68/0x270 [rpcrdma]
xprt_rdma_close+0x20/0x60 [rpcrdma]
xprt_autoclose+0x64/0x1cc [sunrpc]
process_one_work+0x1d8/0x4e0
worker_thread+0x154/0x420
kthread+0x108/0x150
ret_from_fork+0x10/0x18
Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
WARN_ON() is called in the IO path. And it could lead to a warning
storm. Use WARN_ON_ONCE() instead of WARN_ON().
Fixes: 12542f1de179 ("RDMA/hns: Refactor process about opcode in post_send()")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If it fails to modify QP to RTR, dip_ctx will not be attached. And
during detroying QP, the invalid dip_ctx pointer will be accessed.
Fixes: faa62440a577 ("RDMA/hns: Fix different dgids mapping to the same dip_idx")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Due to HW limitation, the three region of WQE buffer must be mapped
and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.
Currently when one region is zero-hop while the other two are not,
the zero-hop region will not be mapped. This violate the limitation
above and leads to address error.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@vger.kernel.org
Cc: Shuijing Li <shuijing.li@mediatek.com>
Reported-by: Jens Ziller <zillerbaer@gmx.de>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw().
Fixes: add1dc094a74 ("OPP: Use generic key finding helpers for bandwidth key")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Pass the freq index to the assert function to make sure
we do not read a freq out of the opp->rates[] table when called
from the indexed variants:
dev_pm_opp_find_freq_exact_indexed() or
dev_pm_opp_find_freq_ceil/floor_indexed().
Add a secondary parameter to the assert function, unused
for assert_single_clk() then add assert_clk_index() which
will check for the clock index when called from the _indexed()
find functions.
Fixes: 142e17c1c2b4 ("OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs")
Fixes: a5893928bb17 ("OPP: Add dev_pm_opp_find_freq_exact_indexed()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The "opp->bandwidth" array has "opp->opp_table->path_count" number of
elements. It's allocated in _opp_allocate(). So this > needs to be >=
to prevent an out of bounds access.
Fixes: d78653dcd8bf ("opp: core: implement dev_pm_opp_get_bw")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add and implement dev_pm_opp_get_bw() to retrieve the OPP's
bandwidth in the same way as the dev_pm_opp_get_voltage() helper.
Retrieving bandwidth is required in the case of the Adreno GPU
where the GPU Management Unit can handle the Bandwidth scaling.
The helper can get the peak or average bandwidth for any of
the interconnect path.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[ Viresh: Fixed commit log and a comment in code ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
The dp_audio module doesn't make any use of the passed DP panel
instance. Drop the argument.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629056/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-5-f8d1961cf22f@linaro.org
|
|
All other submodules pass arguments directly. Drop struct
msm_dp_panel_in that is used to wrap dp_panel's submodule args and pass
all data to msm_dp_panel_get() directly.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629055/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-4-f8d1961cf22f@linaro.org
|
|
Drop obsolete functions to access audio packet headers. The dp_audio.c
now writes them using msm_dp_write_link() directly.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629052/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-3-f8d1961cf22f@linaro.org
|
|
Use msm_dp_utils_pack_sdp_header() and call msm_dp_write_link() directly
to program audio packet data. Use 0 as Packet ID, as it was not
programmed earlier.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629051/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-2-f8d1961cf22f@linaro.org
|
|
The msm_dp_panel_dump_regs() and msm_dp_catalog_dump_regs() are not
called anywhere. If there is a necessity to dump registers, the
snapshotting should be used instead. Drop these two functions.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629049/
Link: https://lore.kernel.org/r/20241216-fd-dp-audio-fixup-v4-1-f8d1961cf22f@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
No need to traverse through the vm object as each exec queue maintains a
reference to xe_file. Also improve/simplify the comment on why xef is
checked.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
Fixes: 83db047d9425 ("drm/xe: Stop accumulating LRC timestamp on job_free")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3421
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218053122.2730195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
clk_imx8mp_audiomix_reset_controller_register() in the
"if !CONFIG_RESET_CONTROLLER" branch had the first
argument missing. It is an empty function for this branch
so it wasn't immediately apparent.
Fixes: 6f0e817175c5 ("clk: imx: clk-audiomix: Add reset controller")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Link: https://lore.kernel.org/r/20241219105447.889CB11FE@mail.steuer-voss.de
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Many selftests call igt_flush_test() on cleanup. With default preemption
timeout of compute engines raised to 7.5 seconds, hardcoded flush timeout
of 3 seconds is too short. That results in GPU forcibly wedged and kernel
taineted, then IGT abort triggered. CI BAT runs loose a part of their
expected coverage.
Calculate the flush timeout based on the longest preemption timeout
currently configured for any engine. That way, selftest can still report
detected issues as non-critical, and the GPU gets a chance to recover from
preemptible hangs and prepare for fluent execution of next test cases.
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213190122.513709-2-janusz.krzysztofik@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix reporting of negative temperature, current, and voltage values in
the tmp513 driver
* tag 'hwmon-for-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp513) Fix interpretation of values of Temperature Result and Limit Registers
hwmon: (tmp513) Fix Current Register value interpretation
hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers
|
|
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Minor cleanups for bdev/nvme using the helpers introduced
- Revert of a deadlock fix that still needs more work
- Fix a UAF of hctx in the cpu hotplug code
* tag 'block-6.13-20241220' of git://git.kernel.dk/linux:
block: avoid to reuse `hctx` not removed from cpuhp callback list
block: Revert "block: Fix potential deadlock while freezing queue and acquiring sysfs_lock"
nvme: use blk_validate_block_size() for max LBA check
block/bdev: use helper for max block size check
|
|
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219235536.454270-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GSCCS is only used to transport messages from the driver to the GSC
FW; therefore, we can disable it if we're not using the FW, which is
the case on both BMG and PTL. However, the current wording of the logged
message could be interpreted as a problem, so reword to make it clearer
it is not an error and lower it debug verbosity as users don't really
need to know about it.
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3866
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219010924.2466333-1-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix the false-positive "Missing outer runtime PM protection" warning
triggered by
release_async_domains() -> intel_runtime_pm_get_noresume() ->
xe_pm_runtime_get_noresume()
during system suspend.
xe_pm_runtime_get_noresume() is supposed to warn if the device is not in
the runtime resumed state, using xe_pm_runtime_get_if_in_use() for this.
However the latter function will fail if called during runtime or system
suspend/resume, regardless of whether the device is runtime resumed or
not.
Based on the above suppress the warning during system suspend/resume,
similarly to how this is done during runtime suspend/resume.
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217230547.1667561-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
