| Age | Commit message (Collapse) | Author |
|---|
|
Rename this constant to prepare for the introduction of the
MASK_TRANSFER_REQUESTS_SLOTS_MCQ constant. The acronym "SDB" stands for
"single doorbell" (mode).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI host template members .cmd_per_lun and .can_queue are copied into
the SCSI host data structure. Before these are used, these are overwritten
by ufshcd_init(). Hence, this patch does not change any functionality.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of first zero-initializing struct uic_command and next initializing
it memberwise, initialize all members at once.
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Several functions are declared in include/ufs/ufshcd.h and also in
drivers/ufs/core/ufshcd-priv.h. Remove the duplicate declarations.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-2-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To debug link issues in the field, serdes Tx/Rx equalizer values
help to determine the health of serdes lane.
Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer.
The following list of equalizer param is supported
a. rx_equalization_pre2
b. rx_equalization_pre1
c. rx_equalization_post1
d. rx_equalization_bflf
e. rx_equalization_bfhf
f. rx_equalization_drate
g. tx_equalization_pre1
h. tx_equalization_pre3
i. tx_equalization_atten
j. tx_equalization_post1
k. tx_equalization_pre2
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To debug link issues in the field, it is paramount to
dump fec corrected/uncorrected block counts from firmware.
Firmware requires PCS quad number and PCS port number to
read FEC statistics. Current driver implementation does
not maintain above physical properties of a port.
Add new driver API to derive physical properties of an input
port.These properties include PCS quad number, PCS port number,
serdes lane count, primary serdes lane number.
Extend ethtool option '--show-fec' to support fec statistics.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
Standard defines above statistics per lane but current
implementation supports total FEC statistics per port
i.e. sum of all lane per port. Find sample output below
FEC parameters for ens21f0np0:
Supported/Configured FEC encodings: Auto RS BaseR
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current driver implementation for Sideband Queue supports a
fixed flag (ICE_AQ_FLAG_RD). To retrieve FEC statistics from
firmware, Sideband Queue command is used with a different flag.
Extend API for Sideband Queue command to use 'flags' as input
argument.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Commit series that makes some small improvements to code and the
kernel log messages.
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
The vmd driver creates a "domain" symlink in sysfs for each VMD bridge.
Previously this symlink was created after pci_bus_add_devices() added
devices below the VMD bridge and emitted udev events to announce them to
userspace.
This led to a race between userspace consumers of the udev events and the
kernel creation of the symlink. One such consumer is mdadm, which
assembles block devices into a RAID array, and for devices below a VMD
bridge, mdadm depends on the "domain" symlink.
If mdadm loses the race, it may be unable to assemble a RAID array, which
may cause a boot failure or other issues, with complaints like this:
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device''
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.'
(udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1.
This symptom prevents the OS from booting successfully.
After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm
to detect if there is a mdraid associated with this NVMe disk, and mdadm
determines if a NVMe device is connected to a particular VMD domain by
checking the "domain" symlink. For example:
Thread A Thread B Thread mdadm
vmd_enable_domain
pci_bus_add_devices
__driver_probe_device
...
work_on_cpu
schedule_work_on
: wakeup Thread B
nvme_probe
: wakeup scan_work
to scan nvme disk
and add nvme disk
then wakeup udevd
: udevd executes
mdadm command
flush_work main
: wait for nvme_probe done ...
__driver_probe_device find_driver_devices
: probe next nvme device : 1) Detect domain symlink
... 2) Find domain symlink
... from vmd sysfs
... 3) Domain symlink not
... created yet; failed
sysfs_create_link
: create domain symlink
Create the VMD "domain" symlink before invoking pci_bus_add_devices() to
avoid this race.
Suggested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that moves a disk start message to a location where it
will only be printed once instead of twice plus a couple of error
handling race fixes in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not repeat the starting disk message
scsi: ufs: core: Fix ufshcd_abort_one racing issue
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/clk/sophgo/clk-sg2042-pll.c:396:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
396 | if (sg2042_pll_enable(pll, 0)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/sophgo/clk-sg2042-pll.c:418:9: note: uninitialized use occurs here
418 | return ret;
| ^~~
drivers/clk/sophgo/clk-sg2042-pll.c:396:2: note: remove the 'if' if its condition is always false
396 | if (sg2042_pll_enable(pll, 0)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
397 | pr_warn("Can't disable pll(%s), status error\n", pll->hw.init->name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
398 | goto out;
| ~~~~~~~~~
399 | }
| ~
drivers/clk/sophgo/clk-sg2042-pll.c:393:9: note: initialize the variable 'ret' to silence this warning
393 | int ret;
| ^
| = 0
1 error generated.
sg2042_pll_enable() only ever returns zero, so this situation cannot
happen, but clang does not perform interprocedural analysis, so it
cannot know this to avoid the warning. Make it clearer to the compiler
by making sg2042_pll_enable() void and eliminate the error handling in
sg2042_clk_pll_set_rate(), which clears up the warning, as ret will
always be initialized.
Fixes: 48cf7e01386e ("clk: sophgo: Add SG2042 clock driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240710-clk-sg2042-fix-sometimes-uninitialized-pll_set_rate-v1-1-538fa82dd539@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In general it's a good idea to avoid using bare unreachable() because it
introduces undefined behavior in compiled code. but it caused a compilation warning,
Using BUG() instead of unreachable() to resolve compilation warnings.
Fixes the following warnings:
drivers/clk/sophgo/clk-cv18xx-ip.o: warning: objtool: mmux_round_rate() falls through to next function bypass_div_round_rate()
Fixes: 80fd61ec46124 ("clk: sophgo: Add clock support for CV1800 SoC")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://lore.kernel.org/r/c8e66d51f880127549e2a3e623be6787f62b310d.1720506143.git.liqiang01@kylinos.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.
Fixes: 0e864b552b23 ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers
Allwinner SoC driver changes for 6.11 part 2
One additional minor cleanup
- Const-ify |struct regmap_config| in SRAM driver
- Const-ify |struct regmap_bus| in Allwinner RSB bus driver
* tag 'sunxi-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
Link: https://lore.kernel.org/r/Zo7T4YsfamN0PbYK@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A gang submit won't work if the VMID is reserved and we can't flush out
VM changes from multiple engines at the same time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 320debca1ba3a81c87247eac84eff976ead09ee0)
|
|
Use clamp() instead of duplicating its implementation.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240710143309.706135-2-thorsten.blum@toblux.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
`sun8i_r40_ccu_regmap_config` is not modified and can be declared as
const to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240703-clk-const-regmap-v1-9-7d15a0671d6f@gmail.com
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull VFIO fix from Alex Williamson:
- Recent stable backports are exposing a bug introduced in the v6.10
development cycle where a counter value is uninitialized. This leads
to regressions in userspace drivers like QEMU where where the kernel
might ask for an arbitrary buffer size or return out of memory itself
based on a bogus value. Zero initialize the counter. (Yi Liu)
* tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio:
vfio/pci: Init the count variable in collecting hot-reset devices
|
|
`regmap_sunxi_rsb` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240705-sunxi-rsb-bus-const-regmap_bus-v1-1-129094960ce9@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.10-rc8
Here's a fix for a long-standing issue in the mos7840 driver that can trigger
a crash when resuming from system suspend.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.10-rc8' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
|
|
Detect diag204 busy indication facility.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Instead of setting up non-boot CPUs early in architecture code,
only setup the cpu present mask and let the generic code handle
cpu bringup.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
idpf uses Page Pool for data buffers with hardcoded buffer lengths of
4k for "classic" buffers and 2k for "short" ones. This is not flexible
and does not ensure optimal memory usage. Why would you need 4k buffers
when the MTU is 1500?
Use libeth for the data buffers and don't hardcode any buffer sizes. Let
them be calculated from the MTU for "classics" and then divide the
truesize by 2 for "short" ones. The memory usage is now greatly reduced
and 2 buffer queues starts make sense: on frames <= 1024, you'll recycle
(and resync) a page only after 4 HW writes rather than two.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, idpf uses the following model for the header buffers:
* buffers are allocated via dma_alloc_coherent();
* when receiving, napi_alloc_skb() is called and then the header is
copied to the newly allocated linear part.
This is far from optimal as DMA coherent zone is slow on many systems
and memcpy() neutralizes the idea and benefits of the header split. Not
speaking of that XDP can't be run on DMA coherent buffers, but at the
same time the idea of allocating an skb to run XDP program is ill.
Instead, use libeth to create page_pools for the header buffers, allocate
them dynamically and then build an skb via napi_build_skb() around them
with no memory copy. With one exception...
When you enable header split, you expect you'll always have a separate
header buffer, so that you could reserve headroom and tailroom only
there and then use full buffers for the data. For example, this is how
TCP zerocopy works -- you have to have the payload aligned to PAGE_SIZE.
The current hardware running idpf does *not* guarantee that you'll
always have headers placed separately. For example, on my setup, even
ICMP packets are written as one piece to the data buffers. You can't
build a valid skb around a data buffer in this case.
To not complicate things and not lose TCP zerocopy etc., when such thing
happens, use the empty header buffer and pull either full frame (if it's
short) or the Ethernet header there and build an skb around it. GRO
layer will pull more from the data buffer later. This W/A will hopefully
be removed one day.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable it by default.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the log message of the wmfw format version to include
the file name, and change the message to say "format" instead
of "Firmware version". Merge this with the message that logs
the timestamp.
The wmfw format version is information that is useful to have
logged because the behaviour of firmware controls depends on
the wmfw format. So "unexpected" behaviour could be caused by
having expectations based on one format of wmfw when a
different format has been loaded.
But the original message was confusing. It reported the file
format version but didn't actually log the name of the file it
referred to. It also called it "Firmware version", which is
confusing when a later message also logs a firmware version
that is the version of the actual firmware within the wmfw.
The logging of the firmware timestamp has been merged into this.
That was originally a dbg-only message, but as we are already
logging a line of info, we might as well add a few extra
characters to log the timestamp. The timestamp is now logged
in hexadecimal - it's not particularly useful as a decimal
value.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Don't allocate a temporary buffer to hold a NUL-terminated copy
of the NAME/INFO string from the wmfw/bin. It can be printed
directly to the log. Also limit the maximum number of characters
that will be logged from this string.
The NAME/INFO blocks in the firmware files are an array of
characters with a length, not a NUL-terminated C string. The
original code allocated a temporary buffer to make a
NUL-terminated copy of the string and then passed that to
dev_info(). There's no need for this: printf formatting can
use "%.*s" to print a character array of a given length.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Page Pool Ethtool stats are deprecated since the Netlink Page Pool
interface introduction.
idpf receives big changes in Rx buffer management, including &page_pool
layout, so keeping these deprecated stats does only harm, not speaking
of that CONFIG_IDPF selects CONFIG_PAGE_POOL_STATS unconditionally,
while the latter is often turned off for better performance.
Remove all the references to PP stats from the Ethtool code. The stats
are still available in their full via the generic Netlink interface.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf's in-kernel parsed ptype structure is almost identical to the one
used in the previous Intel drivers, which means it can be converted to
use libeth's definitions and even helpers. The only difference is that
it doesn't use a constant table (libie), rather than one obtained from
the device.
Remove the driver counterpart and use libeth's helpers for hashes and
checksums. This slightly optimizes skb fields processing due to faster
checks. Also don't define big static array of ptypes in &idpf_vport --
allocate them dynamically. The pointer to it is anyway cached in
&idpf_rx_queue.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, all HW supporting idpf supports the singleq model, but none
of it advertises it by default, as splitq is supported and preferred
for multiple reasons. Still, this almost dead code often times adds
hotpath branches and redundant cacheline accesses.
While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
the singleq code only when it's enabled manually. This corresponds to
-10 Kb of object code size and a good bunch of hotpath checks.
idpf_is_queue_model_split() works as a gate and compiles out to `true`
when the config option is disabled.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now that the queue and queue vector structures are separated and laid
out optimally, group the fields as read-mostly, read-write, and cold
cachelines and add size assertions to make sure new features won't push
something out of its place and provoke perf regression.
Despite looking innocent, this gives up to 2% of perf bump on Rx.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With CONFIG_MAXSMP, sizeof(cpumask_t) is 1 Kb. The queue vector
structure has them embedded, which means 1 additional Kb of not
really hotpath data.
We have cpumask_var_t, which is either an embedded cpumask or a pointer
for allocating it dynamically when it's big. Use it instead of plain
cpumasks and put &idpf_q_vector on a good diet.
Also remove redundant pointer to the interrupt name from the structure.
request_irq() saves it and free_irq() returns it on deinit, so that you
can free the memory.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, sizeof(struct idpf_queue) is 32 Kb.
This is due to the 12-bit hashtable declaration at the end of the queue.
This HT is needed only for Tx queues when the flow scheduling mode is
enabled. But &idpf_queue is unified for all of the queue types,
provoking excessive memory usage.
The unified structure in general makes the code less effective via
suboptimal fields placement. You can't avoid that unless you make unions
each 2 fields. Even then, different field alignment etc., doesn't allow
you to optimize things to the limit.
Split &idpf_queue into 4 structures corresponding to the queue types:
RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
queue). Place only needed fields there and shortcuts handy for hotpath.
Allocate the abovementioned hashtable dynamically and only when needed,
keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
is used only for OOO completions, which aren't really hotpath anyway.
Note that this change must be done atomically, otherwise it's really
easy to get lost and miss something.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In C, we have structures and unions.
Casting `void *` via macros is not only error-prone, but also looks
confusing and awful in general.
In preparation for splitting the queue structs, replace it with a
union and direct array dereferences.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
`sunxi_sram_regmap_config` is not modified and can be declared as const
to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240705-sunxi-sram-const-regmap_config-v1-1-1b997cd65d0f@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"One-liner fix for a dmi_system_id array in the toshiba_acpi driver not
being terminated properly.
Something which somehow has escaped detection since being introduced
in 2022 until now"
* tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: toshiba_acpi: Fix array out-of-bounds access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the sorting of _CST output data in the ACPI processor idle driver
(Kuan-Wei Chiu)"
* tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Fix invalid comparison with insertion sort for latency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix two issues related to boost frequencies handling, one in the
cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"
* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Mark boost policy as enabled when setting boost
cpufreq: Allow drivers to advertise boost enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a possible NULL pointer dereference in a thermal governor,
fix up the handling of thermal zones enabled before their temperature
can be determined and fix list sorting during thermal zone temperature
updates.
Specifics:
- Prevent the Power Allocator thermal governor from dereferencing a
NULL pointer if it is bound to a tripless thermal zone (Nícolas
Prado)
- Prevent thermal zones enabled too early from staying effectively
dormant forever because their temperature cannot be determined
initially (Rafael Wysocki)
- Fix list sorting during thermal zone temperature updates to ensure
the proper ordering of trip crossing notifications (Rafael
Wysocki)"
* tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix list sorting in __thermal_zone_device_update()
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
thermal: gov_power_allocator: Return early in manage if trip_max is NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
- One fix for PASemi Nemo board interrupts
* tag 'devicetree-fixes-for-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Disable "interrupt-map" parsing for PASEMI Nemo
|
|
Currently the variables of type struct atmel_tcb_pwm_device
are named "tcbpwm", and variables of type atmel_tcb_pwm_chip are either
named "tcbpwm" (too!) or "tcbpwmc". Rename the chips with device name to
"tcbpwmc" to get a consistent naming.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240709092221.47025-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The two outputs provided by the supported hardware share some settings,
so access to the other PWM is required when one of them is configured.
Instead of an explicit if to deterimine the other PWM just use
hwpwm ^ 1. Further atcbpwm is never NULL, so drop the corresponding
check.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240709101806.52394-4-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
While driving a PWM via the sysfs API it's hard to determine the right
order of writes to the pseudo files "period" and "duty_cycle":
If you want to go from duty_cycle/period = 50/100 to 150/300 you have to
write period first (because 150/100 is invalid). If however you start at
400/500 the duty_cycle must be configured first. The rule that works is:
If you increase period write period first, otherwise write duty_cycle
first. A complication however is that it's usually sensible to configure
the polarity before both period and duty_cycle. This can only be done if
the current state's duty_cycle and period configuration isn't bogus
though. It is still worse (but I think only theoretic) if you have a PWM
that only supports inverted polarity and you start with period = 0 and
polarity = normal. Then you can change neither period (because polarity
= normal is refused) nor polarity (because there is still period = 0).
To simplify the corner cases for userspace, let invalid target states
pass if the current state is invalid already.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240628103519.105020-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
